Control of tree cell fonts problems

Hello

Once more, I am struggling with issues of tree control.  I am trying to format a tree control the alternation of colors for different lines for readability and also I need the first and last cell to have colors different fonts.  At the time of VI the first seal that I run it, it works fine.  During subsequent runs, font colors change to black, and then I am unable to change them again.

Any advice would be appreciated

Tags: NI Software

Similar Questions

  • Edit Tree Control Question, specific cells

    Hello

    I have a question on the modification of tree controls.

    I have played around with the properties and to date have not thought to it. That's what I'm doing:

    I have a tree with multi-column control.

    The columns are essentially: name, Description, value 1 and value 2

    I want to do is be able to select the value 1 and value 2 and change them individually on each line.

    I want to be able to change the name and Description.

    What I was able to do so far is the editable table and every time I get the string in the active cell regardless of the cell that I click in returns always the value of the first column.

    I had this problem by making my changes of value by calling a pop-up box and change the values, but I would rather simplify it by editing the tree.

    I can't give my real code, but if it helps I can make an example facsimile...

    Here's a suggestion:

    -tour of the edition on the tree cell

    -When the clicks double user on a cell, if the column index is 2 or 3 then set the position of the appropriate cell editing

    see this: (in this example, I'm not filtering the column index, but I'm sure that you'll be able to add this feature)

  • Error message "unable to make changes to parental controls settings. If the problem persists, see your system administrator"when you set parental controls for a user account

    Original title: user account with an effort of parental control

    After logging in to my admin account, I created two user accounts for my children, set up parental controls for both that I created, when I tried to set up the third account that he would allow me to activate parental control. It seems that he is trying to load the screen to give me the parental control options then the window disappers and another small window appears saying "cannot make changes to parental controls settings. If the problem persists, see your system administrator. I close the window, and then open the parental controls for other accounts, and they work very well, allows me the chance to change. I deleted the third account several times, making sure to create on behalf of others, just like I did the first two. Still no luck. Can I have only 3 total accounts? My administrator account and standard users 2.

    How can I get a standard user account third with parental controls?

    Hello

    Create a new user account and check if the problem persists, the problem does not persist in the new user account, then fix the damaged user account.

    Create a user account (Windows Vista)

    Screw a damaged profile (Windows Vista)

    Check out the link below to check if the parental control is correctly defined

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls-activity-reports

    Hope this information helps.

  • Parental controls does not: Impossible to make changes to parental controls settings. If the problem persists, see your system administrator.

    Original title: Parental control does not

    Try to set up Parental controls for my son's account. I have an account manager, go to control panel / user accounts / parental control - click on windows expects to obtain two error message with the same message: "unable to make changes to parental controls settings. If the problem persists, see your system administrator. "I'm a sysadmin, so what's the problem?

    On a side note, I have two children on this computer. Had to remove my son because he downloaded a virus. So before the two children had parental control. But when we were going to change their times permit, he would give this error message but weather changes would take place. Now that I am setting up a new account for him, can't get parental controls to work.

    Hello

    Step 1: turn off UAC (User Account Control) and check the result

    See how can I change the behavior of user account control by using the slider? :http://windows.microsoft.com/en-US/windows7/How-do-I-change-the-behavior-of-User-Account-Control-by-using-the-slider

    Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

    Step 2: I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    Check out the link below to check if the parental control is correctly defined

    http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • After a sort cell reference problem

    Hello

    I've never used excel or numbers before but I now have, so my problem would come more trivial to most of you.

    Please bare with me:

    I do a sheet inventory and cost and a few sheets of recipes that refer to the old (inventory)

    I want to multiply say the amount of necessary thyme in my recipe by its cost unit I keep in the inventory cards (I can then modify next change of market prices). Everything works well, but once I have start the sorting inventory cards, cell references are messed up that they remain locked up giving a result based on the new item which is now on this line, instead of after the sorting and always give me the calculation related to the unit cost of thyme.

    Thank you much for the help!

    So far, the results are what I was looking for, but

    say I have sort products by names (or any kind of sorting)

    the formula now references the cost of yuzu that ended instead of the wheat toast all the

    I just thought he would follow the sorting and still give me the cost of the toast.

    Hi YLWT,

    I had a few difficulties to read on your screen shots, because they understood the entire screen and were reduced in size and resolution when it is inserted here.

    To take a picture of PART of the screen:

    • Place the mouse pointer in the upper-left corner of the area you want to include.
    • Press shift-command-4 (the tip will change to a focus)
    • Press the mouse button and drag a selection box to reach the area that you want to include.
    • Release the button.
    • The screenshot will be saved to a file .png on your desktop with the name "screen shot to date at the time.png '.

    As can be seen below, the result, dragged here or inserted using the camera above composition window icon, is much easier to read.

    I did partial copies of one of the dinner tables and the table of the inventory, including only data (composed for the unit price) to the question in the present case. Table 1 gives the meal table, Table 2 is the inventory table. The formula is displayed in the editor, the first table below.

    The first part of the formula is a switch that removes the calculation on this line if no entry is made in column C (quantity). When an entry has been made, IF passes control to the party from C x...

    VLOOKUP Gets the search for value in column A of table 1, the search in the left column of the table (columns A to D of table 2) and returns the value in the same row of column 10 as she concludes the research-for value. The returned value is multiplied by the value in column C (table 1), and the result placed in the cells that contain the formula.

    That the formula does not rely on the reference to a specific cell, it will survive a sort of inventory table that place the ingredient (as well as its unit price) in a different line of this table. Example below:

    Copy and paste version of the formula. Note that you need to change "Table 2" in "Table 2::A:J" to match the name of your table in the inventory.

    IF (Len (C) < 1, "", C × VLOOKUP (, 2::A:J Table, 10, FALSE) ")

    Enter the first cell on your dining table where a cost is calculated, then fill until the last cell before the footer line.

    Kind regards

    Barry

  • Control Panel Tree

    Hello

    I have a tree control that I use to view a test sequence.   I want to put the tree controls in a picture to display several (different) sequences.  I have problems for populating the controls.  When I get the reference, he fills all the controls in the table, rather than a single element.

    Is there a way to fill that one item in the table?

    Thank you
    John

    CPDP says:

    Fine thank you.  If a picture of tree control would work?

    No, that no longer works. Wrap the tree control in a cluster in order to put it in a table always will leave you with the restriction that the properties (for example, tree items) will be the same for each element.

  • control CVI 6.0 chart problem

    I found a very strange behaviour in my 6.0 CVI.

    If I create a new uir, and I create a new chart control, it looks like the image as an attachment.

    Repair the installation of the BCI does not solve the problem.

    Can someone help me?

    Thanks in advance

    Hey vix,.

    It seems that something is wrong with your font (size). Maybe you can try to open the chart control and take a look at the font of the labels used. For some reason, the size is huge, leaving no room for the graph itself (the graph cannot be bigger than the Panel). That is why the graph is just a small rectangle.

    Wolfgang

  • Too many fonts problem

    I have 922 fonts in my police folder in Control Panel. This create a few problems. When I start excel or vlc it show msg that you have more than 500 fonts or another msg.

    I want to keep only the system fonts and remove all the fonts that are installed outdoors or by me.

    but I don't know that that system that are manually installed fonts.

    Please give me a solution I can delete unnecessary or manually installed fonts.

    I have 922 fonts in my police folder in Control Panel. This create a few problems. When I start excel or vlc it show msg that you have more than 500 fonts or another msg.

    I want to keep only the system fonts and remove all the fonts that are installed outdoors or by me.

    but I don't know that that system that are manually installed fonts.

    Please give me a solution I can delete unnecessary or manually installed fonts.

    a web solution, there are other

    http://www.ExtremeTech.com/Article2/0, 2845,1786005,00.asp

  • Table table in a cell alignment problem in Firefox

    I have a simple table of 2 cells in an array of 2 cells. All have the value valign = top. But in Firefox and Safari, the content of one cell is shifted down. The problem with the cells in a table that is exposed is in this screenshot. The page with the issue. Find the table with the products and the finger to the right. All must align at the top, but the product is moved down.

    Any ideas? Something escapes me?
    Thank you!

    Osgood wrote:

    > By default, that some tags have padding and margin applied, it is the case
    > with paragraph tags

    . If you don't want any margin or padding to
    > apply you must put it to zero using margin: 0; padding: 0; as below.
    >
    > .header {}
    > do-family: Verdana, Arial, Helvetica, without serif.
    > font size: 1.5em;
    > make-weight: bold;
    > color: #CC6633;
    > margin: 0;
    > padding: 0;
    > }
    >

    Of course ideally you should use tags for headers of these
    will have priority when the search engine spider comes to your site.

    I'd do it

    Products

    Then style the h1 with some css.

    H1 {}
    do-family: Verdana, Arial, Helvetica, without serif.
    font size: 1.5em;
    color: #CC6633;
    margin: 0;
    padding: 0;
    }

  • Font problem after updating MS omnibox are a vulnerability

    Since 21 July update for a vulnerability of Microsoft Font, character in the omnibox display is faulty.
    This seems to happen only in the input box, the list is ok.
    for example. I type www and the display shows just the white characters (but the cursor seems to have moved).
    If I type www... I have vacuum or jumbled characters until I get at least 12 characters in the box, then it appears.

    You can try to disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

    You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Web page fonts problems

    Hello

    I have some strange fonts like this & nbsp; of & nbsp; on all the Web pages I visit.
    I think I should just see the ampersand symbol. That I can type in email or even now &.

    It is a matter of setting in Firefox, or is it just that my old laptop under VISTA service Pack2, 32 bit just seen better days?

    Thank you
    Pete

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    For Firefox versions prior to 29,0:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the "Reset Firefox" line

      button.

    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    For Firefox 29,0 and above:

    1. Click the menu button

      click Help

      and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.

    2. At the top right of the page, you should see a button that says "Reset Firefox"

      . Click on it.

    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • Example of control simple tree

    Someone at - it a basic vi to show how to create a tree control. Looking for an example showing how to create a parent with little children or a root with some sublevels, whatever the correct terminology is...

    I looked at the example provided with labVIEW but it is quite complex, I played a bit with the tree control methods but get errors...

    Stroke

    Hi the shots.

    See a more simple: -.

    https://decibel.NI.com/content/docs/doc-7248

  • Parental control on the Admin account problems

    A few months ago, I created a new account on my computer for work only.  I set the parental controls on the new account and only the work account.  I got by without my computer for work then off the parental control.  Now, I'm unable to download games without him asking for a password.  I don't know what password I had used since I don't end up need it and none I've tried have worked.  So, how can I, as an administrator, disable this feature?  I have consulted the parental control and done everything I have seen/read that was recommended, but it won't allow me to change the settings on my own admin account without establishing a second admin account.  So, how can I remove this feature from the admin, only the admin?  It does not accept any next to the admin account, and even then it won't take my password.

    I work at it for a few weeks now and tried everything I can think of.  Today I spent most of the day trying to get this thing to work.

    More details on what is happening-
    -I'm going to download a game on the net while connected to my admin account
    -Everything works until the final stage when he usually asks for a general permission to my antivirus
    -A pop up appears which reads: you do not have the necessary permissions to use all the features of the program you are about to run.  You can run this program as a different user or continue to run the program as long as the current user.
    -Click on the current user and it closes, download fault.
    -Enter a password for the administrator and it says I have a user name or password invalid.
    -Enter my username and password and it closes, download fault.

    Can someone please help with this?

    Hello KS. GAL.86,

    Is the problem with the account of the work that you had created that has activated the Parental control? You can only configure Parental controls on a standard account and not an administrator account.

    If so, then create a new account that has not activated the parental control.

    Is the issue that you are experiencing that you can not download programs as an administrator?
    What is the exact error you get when you download a program?

    It cannot have anything to do with Parental control.

    Please answer back with more details and information.

    Thank you

  • Bengali fonts problem in Windows

    Hello

    I am from Bangladesh. Until recent years, we were quite used to do everything in the internet in English. But things have changed a lot now there are a lot of sites on the web in our own language. People really like read and write in Bengali in the internet. The problem is due to reasons (I don't know why) in all newer versions of windows (xp, vista), a font named Vrinda was chosen as taken by default unicode supported Bangla fonts. I am sorry to say that this was not a good decision at all. Not only me, all the Bangladeshis around the world are going to say that. This font is really in trouble. Others it is bad looking for typographs, in the Web page is still too small to read. These days, we install other fonts (for example. ) SiyamRupali) in our computer and use one kind offontfixer of software to change the default windows fonts.

    Please tell me how I can inform people of Microsoft about this problem so that they change the default font in all future versions of windows.

    Thanks in advance

    Faisal,

    Hi Faisal,

    Thanks for the comments, it is much appreciated.

    If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports

    https://connect.Microsoft.com/dashboard/Info/

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Custom font problem

    Hello world

    Please help me I want to load customize font "Calibri.TTF", but it is not my work code is given...

    FontFamily family=null;
    
    if (FontManager.getInstance().load("CalibriBold.TTF", "MyFont11", FontManager.APPLICATION_FONT) == FontManager.SUCCESS)
                    {
                        try
                        {
                            family  = FontFamily.forName("MyFont11");
    
                        }
                        catch (ClassNotFoundException e)
                        {
                            try{
                                  family=FontFamily.forName(FontFamily.FAMILY_SYSTEM);
                            }catch(Exception ex){}      
    
                        }
                    }
    

    Tell me what is the problem with this

    Check your path. Otherwise, check the return value. One of the most common mistakes that people make takes a really big font. BlackBerry has a restriction of size of 6 MB on fonts.

Maybe you are looking for