Control problem of screen colors on laptop Satellite Pro

Similar Questions

• Screen color faded on Satellite Pro M30

  Hi people

  I just browsing the internet when my color on the screen of my old m30 of 11 months gone, I rebooted and all I get now is a blank white screen with a few lines down it. Someone at - it had the same problem?
  I hope that this is covered by the warranty.

  Nigel

  Hi Nigel,

  If your laptop is still covered by a warranty then would certainly consider a Toshiba authorized repairer. It sounds as if there is a fault either with your graphics card you screen.

  Good luck

• Replacement screen for a laptop Satellite Pro broken

  Hello
  Anyone know where I can buy a computer pro satellite laptop screen-I just broke mine.
  How much will cost to replace?

  Hello

  In this case, you must contact the service partner for details.
  On the Toshiba site, you will find the Toshiba authorized service partner who is responsible for your country.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good bye

• Unable to start my laptop Satellite Pro - orange flashing

  I can't boot my laptop Satellite Pro.
  I have an orange light flashes. I tried to remove the battery and hold the power button, but it did not work...

  Help

  I agree with Liam.
  The indicator flashes as a serious hardware problem was detected.
  What you could do is remove the RAM modules and test the device with the new test modules but I guess that is not RAM problem but something wrong with the motherboard.

• Need driver graphics card for my laptop Satellite Pro 4310 W2K

  Hello

  I'm looking for a graphics card driver for my laptop Satellite Pro 4310.
  I need a driver for Windows 2000.

  In the Toshiba download area that I can't find a driver for the 4300 series? There are only the names of laptops as A / S / P / series U and so on. 4300!!!
  I know that the laptop has the S3 Savage/IX card inside.

  Is someone can help me?

  THX...

  Best regards
  Thomas

  Have you checked also option ARCHIVE in type of product?

• Satellite Pro 400 cdrom drive fits a laptop Satellite Pro 4300

  Can someone tell me if a cdrom from a Satellite Pro 400 drive fit in a laptop Satellite Pro 4300. I have no serial numbers or cdrom, sorry

  Hi Tony

  The first is about 11 years old and the second about six years. I really put t think you can use it. In my opinion, you must use the same drive.

• Webcam black when you use MSN on laptop Satellite Pro

  Guys... My cam built into my laptop Satellite Pro seems to work fine when I open... But when I use it with MSN Messenger its always dark... I want to say if I put it on the mood of night that would work with the cam software, but not with MSN.

  What should I do!

  Help please

  If you use MSN the webcam software shouldn't t be started and should not work!
  Disable the webcam software in msconfig. The webcam software should not start automatically when you start the laptop.
  Also, the MSN shouldn't t load. Also disable in msconfig.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• The screen works not the Satellite Pro a

  My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850
  When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.
  I tried removing the battery, now the Start button / stop for 45 seconds etc... That did not work.

  I tried to start and stop a lot of times, it starts the desktop computer, I can hear the sound of it connection, but it seems to take more time for the sound to happen now and it seems to the connection ring twice, 10 minutes apart.

  One of the moments where I turned it on it the screen worked and it has loaded the system recovery, I chose to keep my existing files and the partition, the screen worked for the half-hour it took to recover windows, then when it restarted the screen wasn't working again...

  It's very frustrating as a week ago, that the laptop was with Toshiba repair, there is no previous problems with the screen, I sent him with a cooling fan failure...

  Any help would be appreciated, I need laptop badly I work online and need to pay the rent...

  Sorry to hear that very annoying if computer laptop / computer starts to malfunction.
  From my point of view, no one here in the forum would be able to help this issue, because I think that there is something wrong with the hardware.

  You can connect the external monitor just to check if something is not visible on the 2nd screen but of course, this would not correct the problem of the laptop.

  Maybe the problem is related to the last laptop repair? You said that the laptop has been send to the service about a week ago, it's just a guess, but maybe the technician made some mistakes last time who knows that I recommend you to get in touch with the guys again

• Only 16 colors after formatting Satellite Pro 430cds

  I have an old satellite pro 430cds which I recently formatted to reinstall the operating system.
  I still have the original disk from toshiba which allowed me to re - install the cd-rom, but I am only able to get 16 colors the screen refuses to accept the same 256-color or higher resolution.

  I tried different things and different drivers, update bios and all have proved to be unsuccessful. The graphics card is a chips and tech supervga card and has the correct drivers, but I am getting now at the end of my same with that.
  I would like to buy a new graphics card, but I fear that the same problem would prevail.

  Am I missing something obvious and someone can help me?

  Hello

  See the page of the Toshiba driver for the graphics driver from Toshiba.
  Try to install it.
  On the page of the Toshiba driver I found the drivers for Win95, Win3.1x, and WinNT.
  If you plan to use the other OS so I think you should use the standard operating system driver.

• Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

  Hi all.

  I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

  I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

  After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

  I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

  I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
  The first onewas ok, everything works. Either everyone has this problem :/

  I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

  Any suggestions what may cause the problem or how to fix?

  I think you should first clarify whether your headset is OK.

  My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

  Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

  If in case the headset is faulty, the speakers and the headphones would not work.
  So I think you should check the helmet first.

  If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
  Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

  The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

  However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Solution found to the problem of "BAD RTC BATTERY' on Satellite Pro 6100

  Hi, I'm from the Italy.

  I myself have solved this problem without changing the motherboard on my laptop second hand satellite pro 6100.

  for info: [email protected]

  Hello

  may I ask how you solved this? I have the same machine and this error pops up sometimes.

  Welcome them

• No sound from my laptop Satellite Pro

  Hello

  Can one of you kind folk help please? I have a Satellite Pro laptop computer 8 months, up to now, I have never needed to use the speakers or reading.
  However, I now need to use iTunes and windows drive but for some reason that I can't not all the sounds of the L/T the mute function is disabled, all the graphics seem to show that everything works.

  I guess I missed something but don't know what. I'm not a wizz with computers so that all aid should be aimed at the simple end of the scale.

  Kind regards

  Them.

  > I have a Satellite Pro laptop computer up to 8 months, now I've never had need to use speakers or reading
  It's amazing to me.

  In my opinion you should check the device first Manager if the sound card is recognized correctly and if the audio driver is working.
  Also you can remove the soundcard from the Device Manager and may reinstall the audio driver that you can download from the page of European driver of Toshiba.

  Last but not least after installing the audio driver, check the sound settings in the control panel-> sound

  Good luck