My dvd drive does not appear in my computer. It is powered but sends no data. Someone knows how to solve this problem.
I don't know what to do. I tried the Microsoft ATS but no dice.
Hi Michelle,
1 did you change on your computer before the show?
I suggest you to perform the following troubleshooting steps to resolve this problem.
http://support.Microsoft.com/kb/982116
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Tags: Windows
Similar Questions
-
my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem
Return to the previous MAC OS until it's resolved.
-
Aspire 5740g and the dvd drive does not appear in 'my computer '.
I had to have a new installed hard drive I got an error message saying old default disk.
I also had a clean install of windows 7 that I was uncertain if my discs that I created would be ok.
So I have not all the gifts that have been installed on the laptop like new. Now, I find that the dvd drive is not displayed in my computer and nothing happens when I insert the disc.
This has happened a couple of days and I did a restore of the system to a previous restore point. Does anyone know how to solve this problem.
I also do not have the secure egis - any ideas how to get this back
Then... your DVD is probably defective.
did you check in the BIOS if it is listed on bootable devices?
Press F2 at startup, if it is not listed, it is defective.
-
IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.
How to solve this problem? Is there someone who has the same problem?
Howdy,
Thank you for using communities Support from Apple.
I see you try to get your iPhone to interface with the stereo in your car via Bluetooth. For setting this up, please follow the steps below.
If you use Bluetooth
- Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
- On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
- Restart your iOS device.
- On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
- Update your iOS device.
- Install the updates to the firmware of your car radio.
- If you still not connect, contact Apple technical support.
Help to connect your iPhone, iPad or iPod touch with your car radio
See you soon.
-
the cd/dvd drive does not appear in my computer or in other places! so I can't start the CD
After upgrading windws vista to windows 7, I can't find cd/dvd drive in my computer (sony vaio) .plz I can do to fix this?
Hello Rash0411,
Thank you for your message. First start by going to your computer manufacturer's website and download/install the latest driver for your device. We will check the following:Click 'Start' > right click on 'Computer' > select 'manage '.Click on Device Manager.Expand "readers of CD-ROM/DVD-ROM" (you see a yellow!, or you see your drive at all?)If you don't see any of your drive, you may need a bad connection of your drive power to the motherboard or power.Please let us know.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Ideas:
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello Susan4659,
Thank you for your message. Please see the link below, most likely you're trying to view photos taken with a camera that uses a specific format which is not standard with Photo Gallery.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello
I have an iMac 21 inch 2009 and I want to upgrade the RAM. I bought 2, 8 GB OWC ram and installing cards, I get 1 tone every five seconds. I am sure that they are installed correctly, and I tried each slot. I removed the mac ones and put back them in and it was a normal start up.
Any help or comment is appreciated!
see you soon,
V
There is no such thing as an iMac 21 "2009. (There is a 20 ", which has an acceptable ceiling of 8 GB Ram)
What is this iMac model identifier?
-
Someone will help me fjnd out what to do and how to fix it. My problem is when I try to install anything, I get an error message 1706. can anyone help me solve this problem without cost me fifty dollars or more
See:
You receive an "error 1706. Setup cannot find the required files...
-
Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS
The CD/DVD drive does not appear in the window manager and I can't incert CD
The BIOS displays "none" instead of "optical device".This means that the CD device is dead?
Hey Micky,
Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.
Check also that it is not displayed in Device Manager and if it is remove before trying the above.
Kind regards
-
My DVD drive does not appear in Windows Explorer
This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD. No DVD, CD or even disks with files stored on them.
When I open windows Explorer, the drive from DVD (e) is not even more appear. I was wondering how to fix this.Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Satellite A350-CD/DVD drive does not appear
My CD drive does not appear in my computer and no longer works
Help, please!
Thank you
Hi denis,.
It appears perhaps with yellow exclamation point in Device Manager? With the code 19 error? I ask this question because I founded this interesting article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/314060In addition, it would be interesting to know if the drive is seen in BIOS or not because in the worst case, need to replace the disk.
-
I found the warning event ID 500 messages but do not know how to solve this problem.
Original title: out of memory
have tried disk cleanup, defag, cleared the cache, none of them worked. windows solutions I tried and found event ID 500 warning messages, but do not know how to solve this problem.
Are you talking about a disk or virtual memory space? For the lack of virtual memory issues, see this:http://windows.microsoft.com/en-US/windows-vista/Preventing-low-memory-problems
-
I cannot open photoshop, I get the error message stating: "could not initialize Photoshop because the preference was not valid (it has been deleted)" nobody knows how to solve this problem? Thank you!
Hi malloryf,
Greetings!
Please reset the Photoshop preferences and try again.
Here's a similar thread: Re: preferences was not valid.
Concerning
Jitendra
-
Toshiba Canvio Basics HARD drive does not appear in my computer
Hello
I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc
Please help and Windows 7 or windows 8.1 PC do the same thing.
Hello
I found the description of the product of this external HARD disk:
Product features:
• USB 3.0 - powered portable add-on storage.
• Voltage of bus capable USB, no need for AC adapter.
• Easy to use with no software to install.
• Adapts to large digital files with spacious storage capacity.
• Protect your drive (internal shock sensor and ramp loading technology).Specifications
• Capacity: 1.0 TB
• Interface: USB 3.0
• Transfer rate: up to 5 Gb/s
• Speed: 5 400 rpm
• Average access time: 12ms
• Cache buffer: 8 MBIt is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable -
Drive external DRIVE does not appear in my computer
Windows says new hardware detected... your new hardware is installed, but it does not appear in my computer. No drive letter is assigned.
Can anyone help?
Do you use an external USB HDD? Does a job on another computer?
Maybe you are looking for
-
I installed an older version of clue on my computer. The game does not work very well. I tried to uninstall, but "the data is corrupted". The geek squad told me to reinstall the program. It does not have to uninstall the game. I tried to untall
-
When system startup until the date and time are wrong
When I boot up I have the wrong system time and date of that change that and everything works fine but when I stop computer and restart the same thing happening again any info would be appericated thanks
-
Basis of dye or pigment black and colors k5400 HP 88
I would like to know if black and colors is dye or pigmented. Thanks in advance for your help.
-
Solution of problems to restart the computer and when the awakening of the mode standby
original title: resolution shifting se in windows Vista on my Dell PC when I restart the PC or wake him up from his sleep My default is 1440 X 900. My PC is Dell Inspiron 530 and I have Windows Vista Home Basic Service Pack 2. Type of system is the 3
-
OpenGL/ForeignWindowControl white when he is «on on BES»
I have someone who tests battery Guru when it is installed on a device activated on BES. The application has a graph drawn using OpenGL in a native window in a ForeignWindowControl. (See screenshots). What he sees in the area where the graphic should