Updated table controller drivers and Firmware at boot from a SD card?

Similar Questions

• Satellite A200 - I can boot from PCI express card?

  I have a laptop A200.

  I recently bought a PCI expresscard HD. Many people have asked this question already on many sites and regarding several different brands and models of laptops. According to anadtech and other techys the only way to do an ExpressCard hd is updated the BIOS. During the installation of Windows it says that it canoe on the device because the BIOS is not able to boot from it.

  Toshiba creates a new BIOS to allow starting the expresscard hd or not Toshiba have a laptop model that will allow already, as im thinking of buying a new laptop but only if this option is available.

  There someone using windows vista/xp knows a way round.

  Hello

  As far as I know it s not possible to boot from PCI express card on Satellite A200.
  In addition these books where you can boot from this slot are not known to me. Only the options HDD, CD/DVD, USB and network, but all that s.

  In addition, I put t know what you mean with PCI expresscard HD.
  Is what exactly?

• NB510 - boot from the SD card?

  Hello

  I have a question related to booting from SD cards.
  As my NB510 has no optical device, I thought to use an SD with Linux on it to boot from.

  The reason is that sometimes I need Linux and I don't wan to lose my Windows partition or another partition of my HDD with a 2nd OS.

  My experience is that more than one OS at a disk always causes unnecessary trouble.
  Unfortunately, it seems that the NB510 does not boot from the SD card.

  I created it with the Toshiba SD Memory Format Utility and "UNetbootin" to create a card with the last OpenSUSE Linux.

  When, in from the laptop and press F2 (or F12), all available drives be filed - but not my SD card (Yes, it was inserted). BIOS Insyde H2O also doesn't seem to provide the SD card as boot drive.

  So is it possible to get my NB 510 booting from SD card?

  Greetings from the Germany

  Hello

  Why you boot from the USB flash key t n?
  As much as I know the NB510 support the start of disk HARD primary, Network (LAN), USB, USB HDD and USB WEIRD memory.

  If booting from USB is certainly possible.

• error after update of the code and cannot re-boot

  After being asked to download an update from Windows on the Web and then to restart my computer two days ago, since then, I could not restart. I tried all the options available to start, restart, safemode, guest C (which I didn't), networking, you get the idea. I'm not savvy computer even if when I get to that screen I ' don't know how to get a "command prompt". I select options and they stop is to ' CHKDSK checks the index / an unspecified error has occurred "or! 0xc0190036! XXX/47373 (wer.dll)"or" Loaded: \windows\system32\drivers\crcdisk.sys please wait "in no case have I've been able to release one of the screens, once they get to this point, did I was able to reboot Windows in any mode whatsoever. I'm in Germany at the U.S. military running on a laptop with Vista. Help!

  1. how to record data, if necessary,

  2. put it back to factory settings.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a new computer and firefox crashes constantly on it, even though I disabled all addons. I've updated all the drivers and software. What should I do?

  Accident id also does not work, and does nothing when I ask for more details.

  Hey,.

  well, it is a known incident, please try the following (he reported to work for some users):

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

• USB controller drivers and controller for HP Envy 17 SMBus

  Dear all,
  
  I have big challenge trying to locate and install the drivers for the USB controller and SM Bus for my HP Envy 17 controller.
  Recently they start causing problems and the message in the properties device manager says that the drivers are not installed, I am on Windows 7 Ultimate (64).
  
  Thanks in advance.

  Dusan

  You are the very welcome.

  First install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89304-1&cc=us&DLC=en&LC=en&OS=4063&product=5093438&sw_lang=

  Then install the driver of the usb3.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94241-1&cc=us&DLC=en&LC=en&OS=4063&product=5093438&sw_lang=

• HP Pavilion G4 1042TX Ethernet controller drivers and drivers PCI Communication controller

  I have the notebook above but I can't connect to the Internet with an ethernet cable connected from this laptop to my router.

  In Device Manager, it says to the two yellow triangles with a «!»

  Where can I find the drivers for them?

  On the page drivers I see many riders, but no driver ethernet.

  I have Windows 7 32 bit.

  Thanks in advance.

  Hello

  To solve the problem with:

  • Controller Ethernet download and install this driver.
  • PCI Communication controller, download and install this driver.

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• V3 - 771g S8 i7. V2.28 BIOS how to disable secure boot mode and allow to boot from usb/dvd

  Hi people,

  Recently my laptop w8 shared with my brother get sick. So I decided to get out the trusty old diagnosis

  USB and dvd, you know, ubcd centos ophrack. Much to my dismay, I couldn't start any of them. So after some faffing

  everything on the net, I was able to boot/secure boot / disabled, which meant I could f12 at startup in the Boot Manager.

  Unfortunately, the drama is over. Kindly listed boot manager internal hard drive, but not bootable usb or dvd connected.  so I thought, I'm going to be cunning and change the boot order of start. Yet once the monster of Bios Acer jeeringly laughed at my attempts to

  take control of the material, I dared try control simply because I happened to pay a substantial amount of money to acer.

  So, it seems, the only option I have left to change is boot/boot mode / (boot uefi/legacy). So what I need to change to restore the boot control, is to change legacy BIOS uefi? Who will install the w8 cack?

  Also what happens if I want to replace the hard drive with an ssd in the near future, is not not to work?

  Oh, I tried to get help from the enamel of acer, their response said essentially bios/uefi is isn't a problem acer because it is sw and realized

  What seemed like a pay per minute service.

  Skills of good customer Acer.

  Any help appreciated,

  Hello..

• No OS and does not boot from the CD!

  Help! I have a laptop SONY VAIO that has used to have Windows VISTA on it, but frustrating a friend who thought he knew computers formatted the C drive! Now I have a laptop without OS and even though I have new vista Ultimate edition and windows 7 disks or yhem will start. I changed the BIOS so that it starts only internal optical drive but nothing! I did a repair disc in Windows 7 I have on another computer laptop and who does not, but I can not move forward. Can you please help?

  Hello

  ·         What is the model number of the computer?

  ·         Are you able to press any key to boot from the CD/DVD?

  I suggest you to contact Sony, because you are not able to boot from the DVD.

  Sony support

  http://eSupport.Sony.com/Perl/support-contacts.pl

  I hope this helps.

• Stops on his own computer and will not boot from the CD

  someone entered cmd and did something to my computer, now, the computer shuts itself, what can I do I tried to reinstall windows and the computer does not start from cd?

  * original title - someone entered cmd and did something to my computer, now, the computer shuts itself, what can I do I tried to reinstall windows and the computer does not start from cd? *

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  See you soon.

  Mick Murphy - Microsoft partner

• HPE 410T: How can I boot from a MicroSD card?

  Hi I have a PC that goes over six years and would like to know how to start on a MicroSD card from office of 410t HPE. I am able to boot from a USB key by pressing and holding down the ESC key on startup to select the boot device and my USB flash drive appears in the list of bootable devices, but my microsd card does not appear in this list. Is there anyway that I can boot from the microSD on this computer? Thank you.

  bert6822

  Sorry, but you can start only off the coast of devices that appear in the selection of start menu.

  If it is not there, it can not be used at startup - and SD cards are a common problem in this regard.

  However, there is microSD adapters / USB (I have one of my cards), and if you don't find one of those, you might be able to start using a USB port.

  Good luck

• Re: Satellite C855-1HE - cannot boot from an SD card

  Hello

  I've updated to the latest BIOS, but is not an option to boot from SD card.

  can anyone help?

  concerning

  starbase64

  > I've updated to the latest BIOS, but is not an option to boot from SD card.

  The BIOS does not support this function!
  You can start the laptop using the following bootable devices:

  -USB FDD,
  -Primary HDD,
  -eSATA
  -USB drive,
  -Network (LAN)

  Welcome them

• Satellite P100 - 444 PSPADE: need the Cardbus controller drivers and ultramedia for WinXP

  Hello, I have a Toshiba Satellite P100 - 444-PSPADE and I need Cardbus and ultramedia controller for Windows XP drivers, please.

  I did not find them on the official website of Toshiba. Thank you.

  Hello

  won´t you need them, the drivers for cardbus to be included in the utility/driver chipset from intel. Other stuff like flashmedia etc. will be installed when you install the flashmedia driver.

  See you soon

  P.S.: If you have already installed everything then check your device if Manager something is missing. If everything is installed, then relax and be happy.

• Controller drivers and controller missing SMbus HP 2000 network

  Hi, I have difficulties to access the network wireless using my computer laptop hp laptop 2000. Missing drivers are the network controller and SM bus controller. I tried to install drivers several more listed as hp 2000 drivers but they do not work. I am currently using windows 7 32 bit. What are the missing drivers hrdware IDS.

  Network controller

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  SM bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1854103C & REV_04
  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1854103C
  PCI\VEN_8086 & DEV_1E22 & CC_0C0500
  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  Help, please

  Hello:

  Here are links to the drivers you need:

  SMBus controller...

  Install the AMD chipset driver and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-32

  Wireless:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_128686_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken