Controller high definition audio, get code 12 error?

Similar Questions

• High definition Audio Device Code 10 - device cannot start (tried all the typical solutions)

  Hey!

  Let me first, I use a laptop Aspire V3 - 772g.

  After the recent update of Windows 10, I had problems getting past the lock screen (took FOREVER to get to the point where I could enter my password) and it had been awhile, so I reformatted ('reset my PC' delete all files) - that didn't really solve my problem, so I used Rufus with an iso of Windows Microsoft to remove all partitions and start 10 REALLY cool. Since then, the laptop runs like a dream - in all but a point.

  It seems that no matter WHAT I do, I can't get my audio HDMI / TV to appear as an option in the playback devices (Yes, disabled devices is checked). Looking in the Device Manager, the high definition Audio Device has an exclamation point is to launch a code 10 - impossible to start the device. I tried to uninstall it, tried to install all the drivers of Intel V3 - 772 f page including chipset, updated my graphics driver / Realtek / drivers Intel HD audio... and yet, nothing. Ran /sfc, ran /chkdsk, nothing.

  I read something that made me believe .NET framework can be part of the issue - and in fact, I have a bit of difficulty getting the 3.5 installed / functional, but I finally did... and yet, nothing!

  Seriously, I'm losing my mind. I'll have to run my sound surround sound via an auxiliary cable into the laptop, which is sacrilege and a fraction of the quality.

  If there is SOMETHING, someone can suggest beyond the foregoing, please do!

  This problem is related to Intel HD audio via HDMI cable, if the driver is in the same package of graphics drivers.

  Have you tried to manually install the audio driver HD?

  you need to unpack the Intel graphics drivers (but no installation, you can use 7z to unzip), and then select update the driver HD audio from the Device Manager and point to the unzipped folder.

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• high definition audio does not work - error code 10

  Current title: idt high definition autio does not work

  My idt high definition autio does not work it gives me a code 10 how to fix

  Hello

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update device drivers.
   
  Follow the given article below for more information.
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
  I suggest you to perform the following methods.
  Method 1:
  You can uninstall the existing driver from Device Manager before installing the new.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. Locate the yellow exclamation mark under portable devices, right-click on it and select Properties.
  3. go tab driver and click Uninstall to uninstall the driver associated with the device.
  After uninstall is completed, restart your computer and check if the problem is resolved.
  Method 2:
  I suggest you update the audio drivers on the manufacturer's Web site see the link below:
  Information about the hardware devices for Windows XP drivers
  http://support.Microsoft.com/kb/319908
  http://support.Microsoft.com/kb/283658
  Method 3:
  I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:
  No sound in windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  
  See also the link below:
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/PT-BR
  I hope this information helps you!

• Vostro 1520 IDT high definition audio

  I have windows xp SP3 with the IDT High Definition Audio CODEC Code 10 I need help.
  

  Thank you
  

  If you have recently reinstalled the operating system?

  Try reinstalling the driver IDT audio.

• I get an error code 10. DT High Definition Audio CODEC driver problem. Have uninstalled and re installed, still no progress. Any advice? I have

  I bought a new laptop, Dell Vostro 3550 and found pirated software. I installed Windows 7 Pro (64 bit).

  There is no sound at all. Get a code 10 message, IDT High Definition Audio CODEC has a driver problem. I uninstalled and re installed the driver without result.
  If anyone can help?

  Hello Eugene,

  When you installed Windows 7 Pro, did you do a reformat and clean install, or have you just loaded Win 7? Part of the problem may be a residual of pirated software. I recommend a reformat and clean install if you can do it now.

  In the contrary case, the thing to look at is if there is a driver conflict between what driver is there now compared to what was there. Go to control panel | Device Manager and watch the video, sound, and game controllers section. What drivers are here for audio? And which audio driver your speakers are pointed to? The active audio driver suitable for your speakers.

  If you could answer my questions, I might be able to help you further.

  Kind regards

  BearPup

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code 10 after deleting high definition Audio Device

  original title: High Definition Audio Device

  Hi, I accidentally deleted my Audio high definition device on my lap top Windows XP (This device cannot start Code 10) I tried to reinstall it. But it happens with the problems encountered. High definition Audio device has a driver problem. I've tried every way, I can ut without success and I see that it is a problem of hugh with a lot. Any help is greatly appreciated.

  Coco

  Yes. Visit the link below to download your audio device.

  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=47&m=W5a&OS=17&hashedid=SNzSY2VyXFuOTPdC

  Good luck.

• No sound. Assistant support said HP idt high definition audio codec ERROR 52

  Laptop HP Pavilion G7-1273NR

  Windows 7 64 bit

  Error of IDT High Definition Audio CODEC 52

  Windows says "No. Audio Output Device is Found.

  Everything worked fine last night.  This morning he has no sound.

  I guess I have an audio driver damaged (corrupted how? I don't know.)

  Just reply with a link to a replacement driver, & and/or advise.

  Thank you.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  If you have still no sound, open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• my sound does not work - IDT High Definition Audio CODEC - shows Code 10

  The sound did not work for about 6 mos

  I uninstalled and reinstalled the IDT High Definition Audio - and every time - there is an error on the re - install.

  Hello

  1. do you have service pack 3 installed on the computer?
  Update the drivers for your audio device should solve the problem.

  Method 1
  Update through Windows Update hardware device driver. To access Windows Update, see the Microsoft Web site at the following address:
  http://update.Microsoft.com

  Method 2
  You can also update the drivers of the provider's Web site. Follow the installation or update.
  See also the links below:

  How to fix sound problems in Windows XP?
  http://support.Microsoft.com/kb/307918

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:
  http://support.Microsoft.com/kb/943104

• I have problem with High Definition Audio Driver Package (cannot activate code 10) my computer have no sound

  I lost the sound on my computer. I followed the instructions in uninstalling and reinstalling High Definition Audio Driver. but still does not.   error message (can't activate code 10)

  Hello

  ·         Where have you installed the drivers from?

  It could be that the driver that you are trying to install on the system is damaged.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to download the driver from the link below and check if the problem is resolved.

  http://218.210.127.131/downloads/downloadsCheck.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Also, I suggest you follow the steps mentioned in the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-sound/sound-distortion-when-palying-any-sound/c2e47af0-7b3d-42d0-a64b-7aa2fe309481

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• How can I get rid of the Wizzard found new hardware: device modem on bus high definition audio kept popping up each time after I logged in my computer?

  How can I get rid of the screen of "Found New Hardware Wizzard: device modem on high definition audio bus" that kept appearing on my screen each time after I log on my computer?  Thank you.

  If uninstall you it, it will all come immediately the next time you reboot and start bugging again.

• I Accedently disable my high definition Audio Device and I cannot get it back

  I Accedently disable my high definition Audio Device and I cannot get it back. IDK what to do but I do not see how to reactivate it.

  Hi MarkRampone,

  Thank you for posting in the Microsoft Community, where you can find all the answers related to Windows. It seems that you have disabled the Audio device high definition and you must activate it.

  In addition to answering these questions that would help us provide a better solution:

  1. How did did you disable the Audio device high definition?

  2. What is the brand and model of the computer you're using?

  Try the steps mentioned in this link and check:

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• This device cannot start (Code 10) - high definition Audio Device AND opening. VHD files.

  Just upgraded from Vista professional to Home Premium 7.  (Which means that I couldn't have the installationl UPDATE and had to go for CUSTOM).  In hindsight, not a good idea!
  1. no sound from speakers.  I tried updated driver.  Problem is with the Microsoft high definition Audio Device.  Using T9404 of advent, Intel R, HD 400 G, 1 G of RAM.  Speakers are not muted and sound card worked fine with Vista.
  2 had a full backup in Vista immediately before moving to 7; But - guess what - can't open. VHD files for the look, or use it!
  Any help would be greatly appreciated
  Concerning
  AL

  His problem solved.  For the benefit of others in the same boat, that's what I did.
  After trying everything I could think of, I had another look at the system clean.
  Computer >
  Drive C (double click) >
  Request >
  Driver >
  Sound >
  Select Configuration, right-click, choose Run as administrator >
  Wizard starts, select 'Reinstall using your computer settings' >
  Reset.
  Hey its nice and presto!  (Which almost took off my head, because I had forgotten that the speakers were entirely upwards).
  Shows Device Manager now that one mistake, on the network controller - anyone has any information about it, what it does, what application it is associated with etc.
  Concerning
  AL

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...