Controller integrated with work RAID1 C drive defined (on Dell) to switch to a different Dell

Similar Questions

• We want to integrate a blog with Oracle trade (ATG) platform. Please suggest what platforms of blogs can be easily integrated with trade of Oracle and the advantages and disadvantages of blogging platforms different.

  We all ATG of the support of the box to join the blogging platform available such as Joomla, WordPress etc... Is what I'm looking for, a rich CMS where the company can create and maintain the product related blog entry and it should be available since the end of the atg. We use short for research.

  Hello.

  I don't know if I understand very well what you are in need, but it is possible that the Oracle WebCenter Sites is what you need.

  https://www.Oracle.com/us/products/middleware/WebCenter/sites/resources/index.html

  I hope this helps.

• vWorkspace and Foglight integration not working

  Hello

  When I click on the diagnosis and the monitoring tab for any element (datacenter, virtual computer users) in vWorkspace I get the following error.

  See not found: system:vdidiagnostics_vmware_consoleintegration.viewCIVMWQuickView

  The Diagnostics tab and real monitoring itself works fine and opens my Foglight homepage without problem (I have installed on a separate virtual computer foglight)

  vWorkspace version is 8.0.306 and Foglight Foglight virtualization 7.1 trail verison.

  Any help would be appreciated.

  Thank you

  Andrew

  Hi André,.

  Foglight for. Virtual desktop (v5.6), which is now supplied with and integrated with vWorkspace and Foglight for v7.x virtualization (VMware) are similar but different products.

  If functionality (and URLs) supported in a single product do not work in the other. vWorkspace is hardcoded to work with Foglight for virtual desktops.

  If you have ITS current for vWorkspace, you are entitled to a copy free from Foglight for the virtual desktop, which takes in charge the two Hyper-V and VMware hypervisor infrastructure + followed by the components of farm vWorkspace.

  Kind regards

  Rick

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• Acer Aspire TimelineX 1830 68U118-t with a new hard drive. How can I get the bluetooth to work?

  I have an Acer Aspire TimelineX 1830 t-68U118.  The original hard drive died, so I replaced it with a new hard drive.  I loaded Windows 7 x 64 and loaded the chipset drivers and the network drivers.  The laptop is always my bluetooth equipment (even if I loaded the drivers Atheros).  Does anyone else have this problem?  How can I get the bluetooth to work?

  It would probably depend on the status of the warranty of the system.

  You must contact the service for options.

• Why xbox 360 controller does not work with all pc games

  Why xbox 360 controller does not work with all pc games

  Ask in an xbox forum.

• 10 with Bootcamp Windows Bluetooth driver

  Hello

  I have an iMac 27' end 2012, running El Capitan.

  I recently installed 10 Windows on Bootcamp, and everything went well.

  Except for one thing:

  No matter what I do, I can't get the bluetooth running module.

  Specifically, its called "Bluetooth USB Host Controller."

  Code 28 drivers were not installed. There is no compatible driver.

  I tried the drivers 5.1.5621 and 5.1.5722 Bootcamp.

  I even tried with handle of the driver file by adding the hardware ID.

  I even tried to kb.parallels AppleBluetoothBroadcomInstaller64.

  It of pretty sad, I think, because the reason why I wanted Windows 10, was that the two bluetooth headsets I tried to pair it with Windows 7, did not work.

  I tried many things, including the various drivers, external bluetooth software. no stable solution possible, even if the keyboard and magic mouse worked perfectly. specifically, I tried the bh111 of sbh20 and nokia sony.

  And another funny thing: Apple Magic Mouse and keyboard work fine with Windows 10 (with the exception of the magic mouse scrolling feature).

  I've read other threads. Basically, the message was: "we will have to wait for the next apple bootcamp drivers."

  Appreciate any help.

  Update:

  I found a way, how you can install the driver.

  You first clear the application of digital signature

  HTTP://COMMUNITY.US.PLAYSTATION.COM/T5/CONSOLES-PERIPHERALS/PS3-CONTROLLER-WITH-WINDOWS-10/M-P/45306699 #M182119

  Then you manually change the driver Bootcamp Bluetooth (AppleBluetoothInstaller64)

  Bluetooth host controller driver does not work

  Well... I could pair my bluetooth headset. BUT... the quality of the sound is horrible, and he blames a delay and delays.

  Any help would be good.

• Motion controller does not work on the Qosmio G50

  Hello

  as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I discovered today that my gesture controller no longer works?

  I went on the site of toshiba europe and downloaded the latest driver for it but once again, I received the message "an error has occurred in the toshiba quad core processor HD = 0x800A0100 code?

  Any help would be wonderful that its driving me around the bend!

  > as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I found out today that my gesture controller no longer works?
  So much trouble, you got there. You may create a Groove and reinstall the original recovery image. After having done this you own preinstalled OS and with the factory settings, everything should work again.

  What do you think about this?

• Problem with 2 USB flash drive in Windows XP sp3.

  I have a USB 2 pci card - USB 2 card, with the hub 7 ports (powered) USB. Sometimes, everything works fine. Most of the time I can't access flash USB dirve. Printer, scanner, camera, photo, mouse, all connected work very well. Plug the flash drive and errors occur. The flash player works fine in laptop (Win xp sp3). Difference between the two machines, the laptop has only 2 USB ports. Have tried to uninstall the USB controllers and re-setup. Flash drive works fine in the desktop integrated USB 1.1. Have checked with Kingston USB drive flash technical support without success.

  When dirve flash does not, Device Manager displays the flash player at the top of the page section of controllers USB bus, as well as generic USB (USB 2?) hub. When the flash works do not drive, hub Generic USB appears in the second USB bus controllers.
  Someone help? Please, I beg you.

  Hello

  Tried your suggestions, without success.

  Have now connected powered hub USB 2 on my edge USB 1.1, with all devices USB works fine.

  Probability of problems seems to be my pci - USB 2 card.

  Being disabled, it is very convenient for me to have the hub USB 2 powered on my work surface to facilitate the connection of my devices.

  Thanks for your help anyway.

• Integrated with HP Pavilion dv9715nr notebook PC webcam problem

  Hello everyone,

  I hope someone can help point me in the direction of a fix of webcam for the problem that my laptop has developed. I spent the last few days browsing the internet looking for a solution to what seems to be a widespread problem, but with no satisfactory solution.

  The problem:

  A few days ago my integrated webcam works with Youcam and other applications of webcam with the message 'not found webcam' or 'Please turn on integrated webcam. Dutifully, I went to the device manage and felt that there was no imaging device listed.

  Related problems:

  In addition to this problem, I sometimes get an installation of an unknown USB device. This device is, I'm sure that the webcam, but try as I might I cannot point to the drivers of webcam or update its driver to something other than the best driver that is already.

  What I've tried so far:

  -Reinstall the drivers from the HP website. None of the many different types of pilot managed to bring the webcam life or showing in imaging devices.

  -Follow-up guide HP for the problems of webcam that ends up pushing me towards contacting HP help desk. Which, I imagine, will cost you a lot more money than the I have no money.

  -Uninstall all usb devices and reinstall using scan for the hardware changes. This has, once or twice, brought back the web cam and imaging device and worked for a while. However, before I can update its drivers computer freezes and turns itself off.

  -Flashed the bios. No change.

  -Downloaded the drivers from various other cam as suggested in the huge amount of bugs, there are online for this problem. Unfortunately, none of them worked.

  -Recovery plant recovery drive. The webcam is still missing in the imagery of the Device Manager section.

  Technical specifications:

  HP Pavilion dv9715nr notebook PC

  Vista 32 bit premium - service Pack2

  AMD Turion Mobile Technology TL-60 2.00 GHz Dual Processor

  1.94 GB OF RAM

  BIOS F.33, 3.09 M

  Webcam integrated into the lid of the laptop.

  Demand:

  If I understand the large amount of online discussion on what is a common problem and I hope that, among the pages and pages of bugs I looked, I missed a fix somewhere.

  If you have had and solved the problem, or if you have an idea how to sort it out, I'd love to hear from you.

  Edmonds (not Christmas)

  Hello again,

  First of all, let me thank the support forum HP for all their advice and now down to business.

  After a week of problems webcam and extensive research on the internet for a fix for the problem that I finally managed to get my webcam - however, I'm not sure how I did it.

  Below is a step by step guide.

  • Become very frustrated.
  • Buy some alcohol
  • Drinking alcohol and try every difficulty in the following two web pages.
  • http://www.PlanetAMD64.com/lofiversion/index.php?t31194.html
  • http://Forum.NotebookReview.com/HP-Compaq/149463-webcam-problem-solved-fingers-crossed-heres-hoping.html
  • At some point during the evening, a HP pavilion webcam appeared, but was very maintained code.
  • Give up, turn off the computer laptop and pass out.
  • Laptop start up the next day and find work and rear HP webcam.

  Now, I know that's not exactly the most empirical of bugs, however, it worked for me. From what I remember last night, the key points seem to be the following. If I insist I was very drunk and I tried almost every difficulty in the two websites above. (The bullet points below are not related)

  • Installation of a very old version of Quickplay.
  • Install the drivers from the DPinstall32.exe.
  • Get a webcam driver update Ricoh are displayed in windows update.
  • Go to Panel configuration/program and using change to the webcam repair and modification.
  • Play with the Services Windows Image acquisition.

  There was, no doubt, many other things I've done and, quite frankly, I am surprised that I did not kill my laptop I did most of them at the same time. However, the webcam is back and running so I recommend drunken stupidity and perseverance as key elements of this fix.

  Finally, somewhere in the two threads I linked will be your fix. There are a lot of different patches so keep and you can do with one of them.

  Good luck. Mines a pint of the black stuff.

  Edmonds (not Christmas)

  Edit - Add the WIA service.

• Wireless controller does not work, said the controller is not an installed device

  My "network controller" does not work it says... And he did my wireless doesn't work don't as well.
  It happened when I installed Windows 7 Ultimate on my Acer Aspire 5542 G. It just says: the network controller is not an installed device or something. I'm not smart with this kind of thing. So can somebody seriously help out me?
  I tried to go to the main web site... But nothing will do it. 0: Yes... And I even tried updating the driver but he just said that he does on windows update...

  Theres 4 here wireless LAN drivers . Select Notepad / sucks / 5442G.

  But you will need to know if its Atheros QMI or Foxconn.

  If this is the wireless on board. If its got one? in Device Manager, double click on it go to the Details tab / change hardware ID's for one of the entries, copy and paste it here.

  Or if you want I could have a glance with teamviewer.

  You'll see what I'm doing. If you get it give me the ID and password, it gives you

  Or if you have Skype, my Skype name is the same name I use here

• How Flash perc 6i controller integrated in dellR710?

  Hi all

  I'm wrong, net flashed on board controller perc 6i server Dell R710.

  I want to Flash the firmware on it again. I checked the dell website, but there is only the procedure on "how to upgrade". I totally want to flash back, the 4 MB file on the map, where I can get it?

  Hi Renon,

  According to what is the current state, here are the links to the FW updates. If the FW is completely annihilated, and the map is no longer functional, there is a good chance that you can not solve this problem.

  (1) you can try flashing the FW within your operating system by running the file update directly

  Integrated firmware PERC6I 6.3.3 - 0002, A00, published on 17/05/2013, recommended, Urgent if yours is less 6.1.1
  Windows: http://downloads.dell.com/FOLDER01002138M/1/SAS-RAID_Firmware_F96NR_WN32_6.3.3-0002_X00.EXE

  Red Hat: http://downloads.dell.com/FOLDER01002136M/1/SAS-RAID_Firmware_F96NR_LN_6.3.3-0002_X00.BIN

  GnuPG: http://downloads.dell.com/FOLDER01002137M/1/SAS-RAID_Firmware_F96NR_LN_6.3.3-0002_X00.BIN.sign

  (2) use the idrac web interface and run remote file update (version .exe for windows) from the update tab.

  (3) use any bootable media to start the command prompt and run the version that is not packaged.

  Non-packaged/Hard Drive: http://downloads.dell.com/FOLDER01000364M/8/SAS_RAID_PERC6i-int_6.3.3-0002_A00_ZPE.exeextract the non-package files out and run update.bat using provided from the following bootable media.

  A common way to do this is to use the following tool to create a USB Bootable flash to in order to get the command prompt.

  See > how to create a Bootable USB Flash using Dell Diagnostics Deployment Package (DDDP) drive
  http://www.Dell.com/support/article/us/en/19/SLN143196/en

  Use the switch 'forcetype' with the update command.
  Ex: update.bat - forcetype

  Please let us know if this helps

• referential integrity with a view to the parent table

  Is it possible to create a foreign key that uses a view as the parent table?
  
  CREATE TABLE one
  + (id NUMBER CONSTRAINT a_pk PRIMARY KEY, +)
  name VARCHAR2 (32));
  
  CREATE TABLE b
  + (name of the b_pk VARCHAR2 (32) CONSTRAINT PRIMARY KEY, +)
  address VARCHAR2 (32));
  
  CREATE VIEW b_view AS SELECT * FROM b;
  
  ALTER VIEW b_view ADD CONSTRAINT b_view_pk PRIMARY KEY (name) DISABLE NOVALIDATE;
  
  ALTER TABLE an ADD CONSTRAINT a_fk
  B_view (name) REFERENCES of FOREIGN KEY (name);
  
  "After issuing the last alter statement I get the error: ' ORA-02270: no unique or primary key corresponding to this list of columns.
  
  If I use just the table b of referential integrity, everything works. Is this just a limitation of the use of the view with a PK defined as disable novalidate? Is there a workaround to use the view?
  
  Thank you
  mcslain

  AFAIK, you can create constraints on views, purely for the sake of documentation.
  Sense: these constraints are never implemented, they must be defined using the NOVALIDATE keywords to DISABLE.

  And since these constraints, say the b_view_pk in your case, are DISABLED/NOVALIDATE, you cannot have a foreign key (ENABLED), which points to them.

  Pouvez have you a foreign key pointing at them is DISABLED/NOVALIDATE too, however.
  But I bet it's not what you want.

• Integration with Active Directory or SSO OID?

  We seek in our options of single sign-on integration with OBIEE Oracle EBS 11.5.10 on top. Currently we have MS Active Directory and Oracle Internet Directory with our users synchronized upward in both.
  
  Can anyone recommend which is better for the OBIEE LDAP/SSO integration and provide the pros and cons of each? Thanks in advance

  PTRAN2,

  If you have any OID then use with AD, you also an external table if you want to be able to define groups, CheminPortail etc. Groups and users can currently be imported, ad, only authenticated against it. It works fine but OID should be admin much more straightforward.

  Ed