convert image into points

Similar Questions

• Convert image into intense Black

  Hello

  I am trying to convert an image into intense Black with these settings: C40 M0 Y0 K100.
  I wonder what the best way is to do this in Photoshop.

  Thank you very much.
  Alberto

  I'd be willing to bet that the printer was referring to flat screens and not the halftone when he suggested 100K + 40 c. Two tones including C will mount a Cyan - the amount of distribution determined by the form d/max and the Cyan curve.

  Because you are dealing with portraits and don't have no control over the choice of the lithographer or the chance to talk with him, 4/C b & w can be risky. Change in the volume of minor local ink on the press can give you all sorts of variations in dominant color according to the tonal balance of separate plates (channels).

  Unless you can talk to the lithographer, for more security, you pay for half-tone b & w systematic reproduction. It seems safer, even if it is disappointing.

• Convert Image into JPEGEncodedImage

  Is it possible to convert an Image in JPEGEncodedImage?

  Thank you!

  I think that I thought about it, but havn't tried.

  Create a Bitmap image, and then use it to create a Graphics object.

  Take a look at the level of the SVG file in samples of the JDE. It's the svgcldcdemo. Basically to rewrite it so that you get your SVGImage, then instead of paint called do you it manually. This will draw the SVGImage for graphics and so the Bitmap image.

  Then call JPEGEncodedImage.encode and pass the Bitmap. Walla, a SVGImage to a JPEGEncodedImage.

  Hope that helps.

• Bug convert Pixels into Points in PS CC?

  Even if I try to type in a point size for type, photoshop poster "pt" next to the number, but there's always in pixels.

  I am designing iPhone apps, should be in points that allow developers to convert with Xcode. Two weeks ago I used points, but now PS won't let me. I think it's a bug...

  I tried to go in the settings of the PS and change at points units. Still not good. He turned the "px" next to a font size for "pt" but nit Exchange actually the font size.

  Try this reset: Cmd + Opt + shift (Mac) or Ctrl + Alt + Shift (Win) launch you Photoshop start. Press 'Yes' when prompted.

  Benjamin

• convert image into RGB?

  I have a doc excel with about 1,000 names of color and their respective RGB values.  Is it possible to create a script that will read a csv file and save each line as a solid color 500px x 500px document?

  I'm looking for a quick way to convert a text list of colors in jpg real color files with the file name being the column A (the name of the color) and the image that represents the RGB color solid.  Any ideas?

  

  This should be close...

  #target photoshop
  var inputFile = File.openDialog("Please select CSV file.","CSV File:*.csv");
  var outputFolder = Folder.selectDialog( "Please select output folder");
  inputFile.open('r');
  inputFile.readln();
  var datFile=[];
  while(!inputFile.eof){
  var line = inputFile.readln();
  if(line.length > 5) datFile.push(line);
  }
  inputFile.close();
  var FillColour = new SolidColor;
  for(var a in datFile){
  var line = datFile[a].split(',');
  var ColourName = line[0].toString().replace(/^ +| +$/g,'');
  FillColour.rgb.red = line[1].toString().replace(/^ +| +$/g,'');
  FillColour.rgb.green = line[2].toString().replace(/^ +| +$/g,'');
  FillColour.rgb.blue = line[3].toString().replace(/^ +| +$/g,'');
  app.backgroundColor = FillColour;
  app.documents.add(new UnitValue( 500, 'px' ), new UnitValue( 500, 'px' ), 72, ColourName, NewDocumentMode.RGB, DocumentFill.BACKGROUNDCOLOR);
  var saveFile = File(outputFolder +"/"+ColourName+".jpg");
  SaveForWeb(saveFile,50);
  app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
  }
  function SaveForWeb(saveFile,jpegQuality) {
  var sfwOptions = new ExportOptionsSaveForWeb();
     sfwOptions.format = SaveDocumentType.JPEG;
     sfwOptions.includeProfile = false;
     sfwOptions.interlaced = 0;
     sfwOptions.optimized = true;
     sfwOptions.quality = jpegQuality;
  activeDocument.exportDocument(saveFile, ExportType.SAVEFORWEB, sfwOptions);
  }
  

• Dell V305 scanner will not convert image to PDF without OCR

  Hello

  I have a Dell V305 scanner, and I would like to convert images to PDF without running the OCR software.  Is this possible?  When I try to convert an image to PDF, it gives me an error "OCR program missing.   My CD drive is broken so I can't install the OCR from the CD software.  I looked for a download from Dell, but could not find one.   Can you suggest a solution?  Thank you very much

  . - Sheila

  Hello

  I never tried to convert images into PDF without OCR. But I've only tried to convert PDFS into images using some PDF conversion tools. I wonder if there is some pluins can thus help with that? You can google it and give it a try. I wish you success. Good luck.

  Best regards

  Arron

• I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows?

  I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows so that I can do the calculations?

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

• because the muse adobe converts text into an image?

  because the muse adobe converts text into an image?

  Hello

  Unless you use a Web safe font or install a Muse supported TypeKit fonts when designing or on your web page - Muse will turn these words into images to preserve their appearance.

  Secure Web fonts:

  http://www.WPDFD.com/issues/87/knowing_about_web_safe_fonts/

  Fonts taken Typekit support for Muse:

  http://museinsider.com/how-to-add-Typekit-fonts-to-your-Muse-site.html

  http://TV.Adobe.com/watch/Adobe-inspire-magazine/using-Typekit-with-Adobe-Muse/

  In addition, whenever you add text and try to create a hyperlink, it is said that the text requires the pixelation and the hyperlink does not work. In this case, either you use a font on the text system or apply the hyperlink to the structure of the whole text, not the selected text.

  See you soon,.

  Laurant

• Convert JPEG image into binary data

  Is it possible to convert a JPEG image into binary data. Because if it would be possible
  You can insert data into a database.
  
  Kind regards
  
  Micehal.

  Yes. check the bitmapdata class.

• Convert image in a table to a radial dimension

  Hey everybody,

  Thanks for taking the time to look at it.

  Here's the question, the code, I'm running works, but I think that it is possible to run faster, I'm not sure how to rewrite the algorithm to do this. I take a picture (seen on the page, the top left figure) symmetrical around the center point. What I'm trying to do, is to collapse all data in this image into a one-dimensional array, which is a radial representation of this image (screenshot, figure in the top right panel). The code that I currently use is illustrated in the figure on the bottom. Subtly which could lead to confusion is the multiple by a factor of 4 in the middle of the code, it was here when I started programming, and I guess that's a scale factor used to kind of spread on several elements of the array data in the table of dimensions a subsequence. As you can see code works effectively, but on average, this operation works on a 56 x 56 px image, so the code must run 3136 times and I don't think it is of the most effiencient way possible, the code takes about 1 ms to run for an image of px of 56 x 56 on our machine. Please let me know if you have any suggestions on how to speed things up, it's half the neck of the bottle for our analysis in real time!

  Thank you

  Joe

  jowparks wrote:

  Hi Bob,

  You have the right idea, which would give us a version of the radial representation. The problem is that if you only use this row of pixels, you take almost all your image data. The radial profile resulting will be extremely noisy compared to the case when you use all the image data to generate radial representation.

  Thanks for your help guys, I feel that there is a way to rewrite the algorithm (entirely) to make this thing run a lot faster than it already is, but I'm just at a loss on how to do it.

  Joe,

  Good point.  This is so how have your Pixels and them, eating too much.  Am I right that you know the coordinates of the center of the Image?  For more convenience, I'll call these details O (for "origin").  I'll also want representation radial distance R (in pixels).  Note that the coordinates of O do not necessarily need to be whole - he may fall "between the pixels.

  Here's what I'd do.  I guess it would be just as fast and precise as possible.  You basically want to use all the Pixels to come with an array of "average intensity" R + 1 (instead of using the example of the x-axis as I suggested).  What you want to do, is to get the average of all the distance pixels 1 from the origin, the average of all the distance of 2 Pixels, etc.  What a pain!

  We therefore reverse the problem.  Take all the Pixels and calculate their distance (rounded) o and include them in the calculation of the average.  Oooh, how?  What I would do, is to create a table of R + 1 of queues to contain the Pixel values.  When you look at Pixel-x-y, at the distance r from O, enqueue the Pixel value in the queue to index r (you know the Pixel if r > R, of course).

  When you have treated all the Pixels in R of O, you of R + 1 queues with intensities of Pixels at the distance r of o.  Just replace the lines with a picture of the averages of each queue.  The fast way to form the average of a queue is to clear the queue and retain its contents (in a table), then the table on average.  You now have used all the points in the Image, (b) take account of its distance from O and (c) calculated averages improved S/N and you have done quite effectively.

  This should be easy to code and fast to run (I'll bet a dime it will beat any other algorithm proposed in the next 24 hours...).

  Bob Schor

• convert images in virtual copies in a collection

  When you create collections in LR5 + you create a pointer to the master file. If you make changes to the images in a collection you change the master. To avoid this you can convert images in a collection to a virtual copies that will be virtual copy

  I don't know if it was a question? In case, it was...

  You can not turn directly copy (convert) an image inside a Collection, in a virtual. A master or a virtual copy (or both) can be added to a collection. There is a 'switch' master status command and copy a version of the given image - but if you have done such an image inside of a Collection version, you also would do the same for the image version outside of the Collection, as well.

  If master images have been added to a Collection, it is possible to make virtual copies of those - then that, if this is done by working 'inside' collection, will result in membership (a little) this special collection, can be inherited by the new virtual copies. Images of masters could then be removed from the collection, leaving only copies. These copies would of course also be considered, alongside their masters, when the relevant image file was seen.

  As part of creating a new Collection, there is an option to add the images highlighted. Beneath this, is an option for this have to happen in the form of new virtual copies - rather than add the masters of these images to the Collection. Was it that you were talking to the OP?

• Place a still Image into a form?

  I just DVD Studio Pro in again and I must say, DVD Studio Pro, has been much more easy and intuitive. What I want to do in again is place a still image into a round shape that I copied from the submenu of city lights. See the image below:

  However, when I import a single .png file of my video as an asset, select the circle and try to drag the image to the circle, he just sits just above the menu and not get "inserted" in the shape of circle. I'm doing something wrong? The text below the circles are the buttons, but I need to convert forms buttons too? I went back to City Lights submenu, which is a part of the library menu again and I tried my photo drag the selected circle, but it did not work either.

  Can someone tell me please how to get a simple image inside shapes? I am looking for tutorials on this and can't seem to find a.

  Help, please!

  I thought about it myself - you select the shape, and then go to object > convert to replacement layer. Wow. I couldn't find this option anywhere - even not in the PDF file for the software...

• Converting Images to CMYK for Print Publication

  When in my workflow should I be converting images to CMYK for print publication?

  Currently, I shoot FIRST pictures with my SLR in Adobe RGB, import images into Photoshop for manipulating and then convert the final image, the size to CMYK before placing it in my Indesign document. Before you go to print, I convert my PDF files using the [PDF / X - 1a: 2001] preset. I use a system that is balanced with a profile for my monitor.

  As many of my photos have shades of green, I am often disappointed by the conversion to CMYK because lose I the saturation and brightness. I'm doing something wrong? Is there a better way to preserve the quality of the color in my images when you go to a printer?

  Never. Leave it as RGB.

  All modern printers should happily accept RGB images. PDF/X-4 is the modern

  standard. X-1a can be described as archaic.

• Convert image to grayscale in monochromatic color (CS4, Win7)

  Photoshop CS4, Win7: What is the best way to take a grayscale image and convert it into monochromatic color?  I've done this before, but after I change the mode to grayscale to RGB color, I can't rememeber stage next and how to choose the base color for the monochromatic version.

  This change in CS5?  Thanks in advance for your help.

  Change the blending mode to normal instead of the hue of the adjustment layer.

  

  MTSTUNER

• Loading images into movieclip

  Hi guys,.
  
  I'm new here! I was wondering if someone could explain to me what I'm doing wrong here.
  
  As part of a mapping system of the Flash-based campus, I am creating an area of 'Information on the rooms' which displays some information about the rooms around the campus, according to the data stored in a Microsoft Access database.
  
  The .asp file that I use works fine, and my dynamic text boxes display correctly the information that each record in the database is queried.
  
  However, I also try to post a picture of the room. The image files are located in the same directory as the .swf, they are not progressive .jpgs. I tried to use the following code (which works for everything except images):
  
  onClipEvent (data)
  {
  Create a Clip to load images in
  mcRoomDatabase.createEmptyMovieClip ("MyImagesHolder", 0);
  
  strName = name;
  strBuilding = construction;
  strType = Type;
  strProjector = projector;
  strSeats = seats;
  strRoamNet = RoamNet;
  strPosition = "Record" Add String (CurrentRecord + 1) add 'to' String (TotalRecords);
  
  loadMovie (name + '.jpg', mcRoomDatabase.MyImagesHolder);
  
  }
  
  -----------
  
  Nothing will load in the movieclip. If I use the code (for an imaginary room called Room100)
  
  loadMovie ("Room100.jpg", mcRoomDatabase.MyImagesHolder);
  
  the picture perfectly. If I put a new dynamic text box to display
  
  Name & ".jpg".
  
  It shows Room100.jpg, which is the same as what I walked when I try directly above.
  
  
  I'm confused as to where I'm wrong? Sorry for the long post!
  
  Thanks a lot for reading
  
  Alex

  We know not if you load external movie, then in the
  film external loading a jpg. If you you have a synchronization problem in that the
  scenario is not increasing and can run before the swf is completely
  load.

  You are better off with MovieClipLoader if you need to know when the swf file is
  load so you can perform methods on the loaded swf file.

  Or you can insert the code to load the image into each external swf file.

  Other points:
  1.
  onClipEvent (data)
  {
  According to me, fires whenever bytes arrive, which could be several times
  We if you are in test mode or live.
  2.
  Add the operator is deprecated. Use + instead.

  http://livedocs.Macromedia.com/Flash/8/main/00002924.html

  3. If you create a critical application mission your code reveals that you need
  update your skills AS you use old techniques.

  --
  LON Hosford
  www.lonhosford.com
  Number of happy bits exempts your way!
  "Alex UK" wrote in message
  News:e1uj2d$RM4$1@forums. Macromedia.com...
  Hi guys,.

  I'm new here! I was wondering if someone could explain to me what I am doing wrong
  here.

  As part of the Flash-based campus mapping system, I am trying to create a
  "Room
  Information "box which displays some information about the rooms
  around
  the campus, according to the data stored in a Microsoft Access database.

  I use the .asp file works properly and my dynamic text boxes
  are
  correctly display the information in each record of the database is queried.

  However, I also try to post a picture of the room. Image files
  are
  located in the same directory as the .swf, they are not progressive .jpgs. I have
  have tried to use the following code (which works for all, but)
  the
  images):

  onClipEvent (data)
  {
  Create a Clip to load images in
  mcRoomDatabase.createEmptyMovieClip ("MyImagesHolder", 0);

  strName = name;
  strBuilding = construction;
  strType = Type;
  strProjector = projector;
  strSeats = seats;
  strRoamNet = RoamNet;
  strPosition = "Record" Add String (CurrentRecord + 1) add "from".
  String (TotalRecords);

  loadMovie (name + '.jpg', mcRoomDatabase.MyImagesHolder);

  }

  -----------

  Nothing will load in the movieclip. If I use the code (for an imaginary
  room called Room100)

  loadMovie ("Room100.jpg", mcRoomDatabase.MyImagesHolder);

  the picture perfectly. If I put a new dynamic text box to display

  Name & ".jpg".

  It shows Room100.jpg, which is the same as what I walked when I try
  He
  directly above.

  I'm confused as to where I'm wrong? Sorry for the long post!

  Thanks a lot for reading

  Alex