Convert recovery Recovery DVD or USB HARD drive bootable disk

Similar Questions

• Re: Partition Recovery DVD or external hard drive

  Hi all

  I need to create a recovery disk, but I only have one chance to do it.

  The instructions indicate that I should do that on DVDs or USB key.

  The question is: I wonder if I can do that on an external hard drive AND I can do it on a partition rather than use the whole 500 gb external HD is it possible? I can't spoil because as I said I have only one chance.

  Thank you

  Follow the instructions of the DVD using DVD + R media.

• l hp dv6-6179-er: recovery on a new hard drive

  Hello world!

  I had the problem with my laptop, it is impossible to re - install windows from the recovery DVD, because the hard drive is broken. Is that going to be a problem to set the new hard drive and install the operating system? Is that there should be some error messages or something?

  shakog wrote:
  

  Hello world!

  I had the problem with my laptop, it is impossible to re - install windows from the recovery DVD, because the hard drive is broken. Is that going to be a problem to set the new hard drive and install the operating system? Is that there should be some error messages or something?

  The recovery disks work on a new hard drive, if they do not post back with the error message.

• Recovery on a separate hard drive?

  Hello

  I have a HP Pavilion Touchsmart 15 b146ef and I need to replace my hard drive. I know I have to reinstall the operating system (Windows 8) but I see I have two hard drive in the devices folder and the C: and D: drives. So I wonder if I need to request a new image of the HP operating system or if my hard drive D: is still available after the replacement and allow me to reinstall the operating system by myself. In other words, are both of these separate hard drives or it is the only kind of a VHD?

  Thank you

  C and D are two partitions on a hard drive. When you remove the hard drive both partitions move with him. You have the software to create a recovery DVD or USB flash media. You create, replace the hard drive, start with recovery media.

  Recovery media creation > Windows 8

• With the help of product recovery CD when the hard drive replaced

  Hi all

  It seems that my hard drive is defective, so I bought a replacement, installed in the laptop OK and tried to use the Toshiba product recovery disc. The laptop started with the disc OK and recovery of product starting screen appeared and I started the process. The process starts, but then crashes and no matter how much time wait nothing further happens.

  I put the defective hard drive, back to and started on the recovery disk and it started and the process started OK.

  The recovery disc can not be used on a replacement hard drive? Surely, this is possible, as hard drives do fail and must be replaced.

  Can someone tell me how to fix it please?

  Thanks in advance!

  In General, you can use recovery image after replacing HARD drive. I did the same thing on my machine.
  It was: is the new HARD drive recognized properly? After Exchange of HDD enter BIOS and check this.
  Before you begin the recovery image installation if please try to set the BIOS to the default settings and try reinstalling the recovery image.

• I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook Windows xp sp3 home.

  I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook.

  I tried to connect my netbook to a sony bravia tv and I pressed the power button to restart because it was so slow awakening of the mode standby
  I am running windows xp home sp3. What should I do?

  Hi samp2000,

  Follow the steps in this article to resolve the problem:

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!

• With the help of recovery on the new hard drive disks

  Hello

  I have an old t160.uk of Pavilion.  The hard disk starts to sound a bit grumpy.  I have a spare I want to replace it with.  Can I create recovery discs using the partition, and then replace the hard drive and reinstall windows xp on the new drive? or the recovery disks only works on the original hard drive?

  See you soon,.

  Hirroshi wrote: what determines if the new hard drive will be compatible with the recovery disk?  Could I connect the new hard drive in another Bay and try to use the recovery disk, before removing my old hard drive?

  Hello Hirroshi, it seems that drives hard very little HP only work in an HP computer, or so I said. I think it has to do with some code that HP puts in the Master Boot Record, but that's just a guess. I read on the Forum that this is the case.

  I suggest that you delete the partition on the replacement hard drive, and then create a new partition and format the hard drive. You should be able to use the recovery disk, if they are not damaged and that you have a valid burn.

  You can try to install the replacement hard drive in the system you propose, and it can work very well. It's certainly worth a try.

  Here is a link that shows how to perform a recovery facility when a hard drive is replaced.

• How can I copy video to a DVD on my hard drive in Windows XP?

  Original title: not a wiz here pc... How can I copy video to a DVD on my hard drive... I have windows XP?
  need help please... thank you in advance.

  If the DVD is "not" a commercial copy protected DVD...
  the following steps may be worth a try:

  When you insert the DVD in your DVD player... close
  all the windows that can open and then go to... Start /.
  Computer... right click the icon for the DVD player
  is located in, and then select Explore or open to view the
  Directory of the DVD.

  The files you need from the DVD are the. VOB files.
  You will find them in the VIDEO_TS folder. Copy them
  in a folder on your hard drive. Or you can copy the
  full VIDEO_TS folder.

  First... just try to rename one of the. VOB files to
  . MPG or. AVI and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video from .wmv to for editing.
  (Note: in Windows 7 you may be able to import the)
  VOB files in Movie Maker just as they are)

  (FWIW... you can probably play the files renamed
  in Windows Media Player to be sure that VOB
  file to edit)

  If you are unable to import the files they need to be converted
  another .wmv format would be a good choice.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Can I import images of DVD on my HARD drive through Bridge (I have Win 7

  Hello

  I use Win 7 (and also to have bridge on Mac OS X). I would like to import images of DVD on my HDD via Adobe Bridge. But I can't find the option to import DVDs in bridge (whether in Windows 7 or Mac). My DVD player on my Win machine is external, so that I have the regular internal DVD on my Macbook Pro drive. I'm trying to import pictures from DVD to HDD via Bridge. Pass the first round selection/reject by the bridge and then bring them to LR for more changes.

  I copy them now the DVD drive in a USB key. And then using the dialog box import Bridge (when I plug the USB again) copy on my HARD drive. I'm doing this because I need to batch rename my files, add metadata and keywords on import. These additions will not allow the function of simple copy/move and so I have to resort to this workaround from USB DVD on the HARD drive (across bridge). If I can import directly from DVD via Bridge, it will save me some time.

  Looking forward help pls.

  THX,

  Chinmoy

  I feel a bit silly now. For 2 days, I struggled and then posted my Q.

  After posting the Q, I thought about it in about 15 minutes.

  Insert the DVD.

  BR open

  Navigate to DVD

  Select all images

  Right-click - Batch Rename

  Choose the Destination path and the new file name.

  And go!

  If you have had the same problem, I did, hope this helps.

• How to change the icon of the USB hard drive?

  My external USB hard drives have this icon,

  http://photoserver.WS/images/N2684b7563a181ccc.PNG

  I guess because I deleted somehow autorun.inf file. I tried to change, guide following from this link

  http://www.astahost.com/info.php/change-drive-icons-labels_t7859.html

  but failed. Make a right click on the (H) does not give me the option to change the icon. How to change? Is it possible to do so directly, by selecting another one of shell32.dll, or more must do something with the registry?

  Also failed, recommendation with file autoran.inf

  [AutoRun]
  label = hard USB
  Icon = slick_hd_green.ico

  in accordance with the instructions of the

  http://www.WikiHow.com/change-the-icon-of-removable-drives

  In meentime, I changed his computer management Label, now it is hard USB and then noted:

  http://photoserver.WS/images/eYZB4b758eb2be362.PNG

  and here is happy about its autoran subfolder

  http://photoserver.WS/images/MRmz4b758eb2c5113.PNG

  What should do?

  And another question: what is the best (small) software to create data photos icons?

  Hello

  Your ad is a bit confusing
  Which external HARD drive, you have exactly?

  I know for readers of the icon can be changed in the Windows registry but is it really so important? I doubt that

• Connect to airport extreme USB hard drive

  I have a drive external hard Iomega LDHD-UP that I want to connect to my Airport Extreme (running the 7.6.4)... version but I can't seem to do.)

  Currently, the airport is set up as a bridge to my Verizon Fios router.  It all works very well.

  The instructions from Apple don't seem to help me, because I do not have "Airport disk utility" - only "Airport utility" - and I'm hit a roadblock there.
  (Airport: how to mount a volume of Airport Extreme USB hard drive in Mac OS X and Windows - Apple Support)

  Normally, I can understand something like this, I thought I would ask for help rather than making circles for another hour.

  Any advice?  Thank you.

  OK, so I read all the info in this article,where to get the Airport disk utility >

  ... and I now know that 'The airport disk utility' is no longer (and does not have the article I cited above), but I'm not even see my drive hard when it is connected to the Airport Extreme.

• How can I download each chapter of a DVD on the hard drive of my computer. I don't want the whole DVD, just different chapters.

  See above. I can't find a way to download the different chapters of a DVD on my hard drive. ?????????????

  Hi Rhoog,

   
  
  Welcome to the Microsoft Community Forums.
   
  We're here to help and guide you in the right direction.
   
  1. What are the contents of the DVD?
  2. what version of windows you are using on the computer?
  3. is that the chapters are presented separately in folders on the DVD?
   
  (a) right click on DVD click on Open.
  (b) select and copy chapter.
  (c) go to the location where you want to download the chapter and paste.
  
  Hope that helps.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• How can I play DVDs from my hard drive with windows XP?

  How can I play DVDs from my hard drive with windows XP?

  If you have a decdoer of installed dvd, usually with packages like power dvd etc that allow you to watch a dvd in your dvd drive, and then later versions of Media Player will also play your DVDs, and all of these programs that play said removable DVD.