convert the guid of mbr

Similar Questions

• How to convert the non - CBD CBD

  Hello

  I recently updated my 11.2.0.2 test to 12.1.0.2 database. I did it using the manual method using perl script. I'm trying to convert the non - CBD CBD. But it fails with the following error.

  Can you please guide me where I am wrong?

  
  Connected to:
  Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
  
  
  SQL> startup mount exclusive
  ORACLE instance started.
  
  
  Total System Global Area 2684354560 bytes
  Fixed Size                  3788008 bytes
  Variable Size            1006633752 bytes
  Database Buffers         1660944384 bytes
  Redo Buffers               12988416 bytes
  Database mounted.
  SQL> alter database open read only;
  
  
  Database altered.
  
  
  SQL> !mkdir -p /oracle/TEST/oradata/noncdb
  
  
  SQL> exec dbms_pdb.describe(pdb_descr_file=>'/oracle/TEST/oradata/noncdb/noncdbtest12c.xml');
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup
  ORACLE instance started.
  
  
  Total System Global Area 2684354560 bytes
  Fixed Size                  3788008 bytes
  Variable Size            1006633752 bytes
  Database Buffers         1660944384 bytes
  Redo Buffers               12988416 bytes
  Database mounted.
  Database opened.
  
  
  SQL> sho con_name
  
  
  CON_NAME
  ------------------------------
  test12c
  
  
  SQL> sho con_id
  
  
  CON_ID
  ------------------------------
  0
  
  
  SQL> create pluggable database exnoncdb_test12c
  as clone
  using '/oracle/TEST/oradata/noncdb/noncdbtest12c.xml'
  file_name_convert=('/oracle/TEST/oradata/','/oracle/TEST/oradata/noncdb/')
  copy;  2    3    4    5
  create pluggable database exnoncdb_test12c
                            *
  ERROR at line 1:
  ORA-65090: operation only allowed in a container database
  cted to:
  O
  
  

  Thank you

  Arul

  1723552 wrote:

  Hello

  I recently updated my 11.2.0.2 test to 12.1.0.2 database. I did it using the manual method using perl script. I'm trying to convert the non - CBD CBD. But it fails with the following error.

  Can you please guide me where I am wrong?

  1. SQL > startup mount exclusive
  2. . . .
  3. SQL > alter database open read-only.
  4. . . .
  5. SQL >! mkdir/oracle/TEST/oradata/noncdb Pei
  6. . . .
  7. SQL > shutdown immediate
  8. . . .
  9. SQL > startup
  10. . . .
  11. SQL > create pluggable database at exnoncdb_test12c
  12. as clone
  13. using the ' / oracle/TEST/oradata/noncdb/noncdbtest12c.xml'
  14. file_name_convert =('/Oracle/test/oradata/','/Oracle/test/oradata/noncdb/')
  15. copy;  2 3 4 5
  16. create exnoncdb_test12c of the database plug-in
  17. *
  18. ERROR on line 1:
  19. ORA-65090: operation only allowed in a database of the container
  20. Executive management to:
  21. O

      Arul

  This link shows the steps to follow:

  Adopting a Non - CBD as a snap-in database in a shared container database

  Looks like you MISSED a step.

  I think that your last START command (line #10 in my shortlist above) begins to the top of the newly converted DB and NOT the new CBD.

  See step of binding ' creation and plug a PDB file in cdb2 using noncdb manifest file.

  See where he uses '. oraenv' for cdb2 environmental? It doesn't seem like you have done this step. So I think that bad environment variables have been used when you did this last start.

  That's why you got the exception 60090 on 'operation only allowed in a database of the container' - you are NOT in a database of the container.

  Check your environment variables and make sure that you are connected to and the correct instance, started...

• Why are the guides in the layer panel?

  Have always shown in the layer panel guides? I swear that didn't used to be the case. However, adding a new guide throws randomly in the layers panel. Is it possible to hide the guides in the layer panel? Or at least automatically group them into their own group or layer? Guides are not a part of the work, so they really should not be included in the layer panel, or at least not treated like all other vector objects.

  DaveB... wrote:

  Guides are not a part of the work, so they really should not be included in the layer panel, or at least not treated like all other vector objects.

  Guides do not appear in the Panel layers in InDesign; they always have in Illustrator.

  They are (sort of) objects in vector Illustrator you can drag a guide from the rule and release it to a line or create a path and Cmd + 5, it a guide. This weird example has been drawn with the pencil tool and converted into a guide.

  Best example: I can draw a rectangle, Center it on the artboard, Cmd + 5 and have the margin guides.

  

  The answers to your questions are:

  Yes, the guides have always been in the layers panel

  Yes, you can move them to another layer the same way you move other objects (good idea)

  Yes, you can hide them with Cmd; the view menu or the eyeball in the layers panel or right-click, to name a few

  Yes, treat them as any other vector object.

• Gets the GUID of the object?

  Hello
  
  Can someone tell me please how to get the GUID of the object?
  
  now what I do is: -.
  
  objectGUID = (String) attributes.get ((String) hmConstantsMap.get ("LDAP_OBJECT_GUID")) .get (0);
  
  the above line gives me object GUID as follows:
  objectGUID = l & Nc?@G?m? E? H4
  
  Now when I'm converted this hexadecimal value what I mean and what is actually different.
  
  SIZE = 6 26 4F 63 B7 13 40 47 9 6 D 9 D 45 CD
  
  What I want to say = 6 c 26 4F 63 13 40 47 6 d 45 48 34 3f 3f 3f 3f 3f

  GUID of the object is always in an encrypted format. You need decrypt the key to convert it to simple format. But I think that you can't. It is not easy.

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• Is there a way to convert the compressed files jsonlz4 in json?

  Hi, is it possible to learn how to properly restore a session of bookmarks via the jsonlz4 file? Firefox lost all my favorites, and when you try to restore using the recovery with the latest jsonlz4 file session the process simply does not end, starts but after a few hours, is still running, with warnings of continuos scripts held or stopped responding. Is it possible to do this correctly? Or a tool to convert the jsonlz4 compressed into json, perhaps html.
  Thank you.

  Well gentlemen: I definitely gave up; whatever the reason, the issue is not resolved. I stay with the old bookmark html, necessarily.
  Thanks for jscher and co - ADR efforts and goodbye.

• can I convert the option to choose in applescript in Automatic Configuration of the action folder

  Hello

  H I have an applescript script that is a sort of an image file and fix it to the sage according to uniqueness of the folder names.

  In this script I choose the folder option, but I want to convert the option into action automatically as a file configuration. as

  on the addition of items in folder to this_folder after receiving of these_items

  Here's my script

  d choose the game folder

  _main ({d})

  on _main (argv)

  o script

  property ff: {} - list of aliases

  property gg: {} - list aliases to be moved by prefix

  nn property: {} - list of file names

  mm property: {} - list of prefixes

  property mm1: {} - separate prefix list

  Repeat the operation with d in the argv - by source directory table

  d to g-d content of the kit

  -retrieve the list of aliases and names for document files

  Tell application "Finder".

  say g-d document files to set point {ff, nn} to {it as list of alias, the name}

  tell the end

  Try

  value {astid0, delimiters of point for the AppleScript text} {of AppleScript point text delimiters {'_'}}

  Repeat with i from 1 to count my nn

  the value {n, m} {my point nn i, ' "}

  If (count of n textual elements) > 1 then set m ' "& n text items 1 thru-2

  put end my mm m

  If m ≠ "" and m is not my mm1 then put end my mm1 m

  end repeat

  the text value of the point astid0 delimiters AppleScript

  errors errs errn number

  the text value of the point astid0 delimiters AppleScript

  error number errn errs

  try to end

  Repeat with m in my mm1 - with separate prefix

  m to m content of the kit

  -prepare the destination for this prefix

  Try

  Set dst as string d & e & ': ' as an alias

  There is no error number-43 - dst

  Tell application "Finder" to set the dst (make new folder d with properties {name: m}) as alias

  try to end

  Repeat with i from 1 to count my mm

  If my mm point i = m and establish the end of my gg to my ff I

  end repeat

  If gg ≠ {} then tell application "Finder" to move the gg in dst with the replacement

  Gg to {} set

  end repeat

  end repeat

  end of script

  say o to run

  end _main

  so if support convert this script for folder action script please help to do.

  Thank you

  Rakesh

  You just need to provide multiple ways to call your manager, for example:

  on run -- application double-clicked or run from the Script Editor
    set d to choose folder
    _main({d})
  end run
  
  on open droppedItems -- items dropped onto droplet
    _main(droppedItems)
  end open
  
  on adding folder items to this_folder after receiving these_items -- folder action
    _main(these_items)
  end adding folder items to
  
  on _main(argv) -- main routine
    -- whatever
  end _main
  

• iMovie imported my clips but did not convert the

  Hi all.

  Recently, I imported a whole bunch of my GoPro clips in iMovie. They seemed imported ok, but when I drag them from the event in the project and then decide I want to make adjustments of speed in clip adjustments, it is said that the clip was not converted - see attached screenshot.

  In addition, displaying some of the clips, some of them do not see smooth, the video will be trolling heavily but audio will continue. This will be resolved once that I convert the clip but it's a bit frustrating when I have to drag the item from the window of the event in the project window and then convert it just to see if I want to use it or not.

  The clips can be converted singularly but takes a while. I was wondering if there was a way to conversion in bulk the clips so that I could just let it run all night and she'll do all clips at once. I have searched through the toolbars, but found nothing. It is mostly just then preview or watch clips or if I want to make adjustments of speed/run the clip towards reverse.

  I made a video in iMovie earlier in the year with images of the GoPro (from the GoPro even) and had no problems with the conversion of import or clip.

  Any help anyone could give me would be much appreciated.

  PS if possible, I don't want to reimport them since I already moved half the clips I want in my project.

  Additional information:

  Computer: MacBook Pro 13 ", about six years, running the Version OS X El Capitan 10.11.4

  version of iMovie: iMovie ' 09, version 8.0.6 (821)

  GoPro used: GoPro Hero4 Silver

  

  I made a video in iMovie earlier in the year with images of the GoPro (from the GoPro even) and had no problems with the conversion of import or clip.

  Were then automatically using El Capitan, or a previous operating system?

  There are many reports on these forums that suggest that worm iMovie 8 and 9 are not compatible with El Capitan.OK on previous operating systems

  Even if you convert the clips there may be other issues.

  The recommendation, if you have problems with the 8 CBS NVA, is to download iMovie ver 10 from the App Store.

  It is not free for users of version 8 it is for users of version 9.

  Version 10 is quite different from 8 and 9 so a bit of a learning curve.

  Do a search here for compatibility with El Capitan iMovie for more information and look for entries of GeeD is the current master

  for iMovie 10 and how to get your events and projects in iMovie 8/9 to iMovie 10.

• How to open or convert the .avi file on old mac running OS.10.6.8?

  How to open or convert the .avi file on the old mac running OS.10.6.8.  We tried downloading several conversion programs as well as programs that run .avi, but everyone's message could not be opened on the mac or require a fee.  Anyone able to fix it.  We have great audio video file we need to convert.

  Try to use MPEG Streamclip; You can be told to install Perian or another component, or who does not open the AVI file. AVI is a container, not a format; no single component or codec will open all reviews, and some cannot be played or converted in Mac OS X.

  (142484)

• Trouble installing EL Capitan. Drive uses the GUID partition scheme

  Hello world

  I am installing an SSD on a Mac book pro 2011. I had been using the separate (Samsung ssd 830 256 GB) ssd (OS not installed) drive on my computer windows yet. I have created an El Capitan installation on a USB drive, swapped the hard drive on SSDS. I open at startup disk utility, erased the drive samsung with format: extended OSX journaled.

  Then returned to install El Capitan, but the Samsung SSD is grayed out and when I click it, it says "this disc is not use the GUID partition table scheme." Use disk utility to change the partition scheme. Select the drive, click the partition tab, select the volume configuration and then click options"

  However when I return to the disk utility, then select Samsung SSD, the partition tab is grayed out and cannot be selected.

  I don't know how to proceed. I would greatly appreciate any help

  Thank you

  .

  You must select the drive icon above the volume icon, that is selected in the screenshot.

• How can I pay the guides span the entire document?

  I hope I'm missing something - but when I put in place of guides in Pages they do not carry the next page or the section of the document (ie. they are individual-specific page). Does anyone know how to set the guides for the entire document?

  They simply failed. You must set up on each page.

  Peter

• Not enough disk space to convert the iPhoto photo library

  My wife iPhoto library has about 9 500 photos. She has a MacBook Air, which has limited hard disk space, so we put his iPhoto library on a SD card (which is still in its SD slot). We decided to convert the iPhone photo library. When the process is started, it happens about 4% on the progress bar when a popup said that there is not enough disk space to perform the task (said to 72GO). How can I complete this process? She wants to ensure its iPhone and iPad Air can all share all the photos via iCloud. Can I put the library of Photos on the SD card too? Once the synchronization of library of Photos with iCloud, not all large digital images disappear from MacBook Air and only a miniature remain (like on the iPhone and the iPad)?

  I decided to try the procedure on my original post on my MacBook Pro.

  I copied the Library.photoslibrary Photos of my MBP to an external hard drive connected to my MBP.

  I did an "Option" + then click on 'Photos' selected the "Library.photoslibrary Photos" on my external hard drive. This produces the following pop-up message:

  "This library contains items to download from iCloud photo library".

  "To download the complete library, delete the incomplete elements, then set this library as the library of the system preferences and activate iCloud photo library. This will disable iCloud photo library on other libraries. »

  "Delete the incomplete items" or "quit".

  I clicked on "Quit" and posted above.

• The address toolbar is missing. I followed the guides online to resolve this issue, do not work. Any other ideas?

  The address toolbar is missing. I followed the guides online for this problem, including disabling macros complementary and extensions. The problem does not occur in safe mode. But occurs even when accelerating, all extensions & add-ins and themes are disabled. I also reloaded firefox 4. Any other ideas?

  Follow these steps:

  1. Click help | Restart with disabled modules.
  2. In the next menu that appears, select: "reset the bars of tools and controls.
  3. Finally, click on the button called "make changes and restart".

• How to convert the old sync key (12 characters, no dashes) to the new sync key (31 characters, 5 dashes)?

  My sync key was of 12 characters, no dashes (xxxxxxxxxxxx). After uninstalling and reinstalling FF 3.6.13, Sync 1.6.1 refuses my sync key to 12 characters.
  I discovered, that the keys of synchronization for all users have been activated to 31 characters including 5 dashes (x-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx). How can I get the new key for synchronization?
  I have no PC connected to Firefox Sync more but Firefox Home and 360 browser on my iPhone successfully sync. Unfortunately on the iPhone I can't display the sync currently used key. Is there a way to convert the old key to sync to the new?
  I need the bookmarks saved in my sync account.
  Thanks for your help!

  I had the same exact symptoms as you did. Here is my solution:
  I installed an older version of firefox sync (1.4.something, I think) and then added my account using my old short firefox sync key. When you try to synchronize, the out of date addon says to do synchronization, it must be updated. After update, I always signed, but now had the additional device to see my new long firefox sync key that was compatible with FF 4 b, etc. Everything works fine now and my computer is properly synchronize.

• 40L5443DG TV: how to change the color of the menu and the guide?

  Hello
  I'm happy with my new TV 40L 544 3 DG.
  But there is a but.

  How can I change the color of the menu and the guide?
  The grey of the text with blue-gray background is not good for my eyes.

  I can change the color by editing a css file in the firmware?
  Please give me a solution.
  Thank you very much.

  Mike

  > Can I change the color by editing a css file in the firmware?
  
  N °