Converting sales letter

Similar Questions

• How to convert a letter scanned in a Word doc?

  Original title: scanning and conversion

  How can I convert a scannned letter to a word doc? I tried remaning file to a .doc, but when I went to e-mail it it came. doc.jpg it takes way to much space for a page simple photocopy of letter...

  Hello

  -What operating system is installed on your computer?
  -What version of Microsoft Word you are using?

  I suggest you to follow these steps and check if they help.

  a. save image scanned in *.gif, *.jpeg.

  b. open this image in paint, go to ' file-> save under "and name it"xyz.tiff"in" TIFF ".

  c. go to "Start-> programs-> Microsoft Office-> Microsoft Office Document Imaging Tools"

  d. go in "file-> open" and open your scanned document that has been saved in *. TIFF format.

  e. go in ' tools-> send text Word.» You will get a prompt indicating that this process will take time, click OK. This will take some time depending on the speed of your computer (a minute or two at the most).

  f. when it's done, it will open Microsoft word on its own, and the scanned document will be in editable mode.

  See also:

  Scan and edit a document

• Letter with paths?

  Hello
  Ce letter may do with the railways?
  How do I do it with Photoshop cs6?
  
  Thank you and happy new Year 2013

  Photoshop cs6 + windows 7
  

  Pen tool is going to be your friend...

  Place the letter on its own layer and lock it.

  On a new track of layer with the pen tool, then between the tool pen {p} and the direct {was} Selection tool, you can manipulate the path until it resembles what your after.

  To speed things up, you can convert the letter to an overview first. {Layer > Type > convert to shape or layer > Type > work path create that you want}

• Legal letter?

  I have a form that I need to convert to letter size legal size but may not know how to do this, it looks like it should be simple enough. I know that I can go to

  Document > Pages culture and change of legal letter in this way, but that does not work when I try and do the opposite, it's just legal. I don't want to just print letter, I need the form or letter. Thank you in advance for your help!

  In the Document > pages of culture select or type a size for the entire page. Click at the bottom (where it says up, down, left & right) and type 3 in. That should allow you to take off the bottom of 3 inches and not give you the error "Page size cannot be reduced.

• Convert previously converted from raw with Adobe DNG converter files?

  It seems that I'm not able to convert my raw files that have already been previously converted to DNG with the dng converter.  I am wanting to start editing everything new with the raw image, but before I can start editing a raw image, I have to convert it to a .dng.  Why doesn't the converter program let me convert the raw file again and give me the opportunity to appoint differently than the first file?  What I am doing wrong?

  If not, is it possible I can say ACR (whether in bridge or photoshop) to get rid of all the changes made on the first converted .dng file and start over again with image in camera?

  Thanks for any help!

  I don't know why your DNG Converter has stopped working.  You have successfully updated to a later version?  But you don't need to go through this process again.  In Bridge, just click on the images and there is an option to reset the Camera Raw settings.  Or, inside of Camera Raw, press the Alt key and a button will change to "Reset".  In both cases, all the camera raw settings are erased, giving you the image as it has been downloaded.

• My keyboard is write the numbers instead of letters

  MY keyboard is write the numbers instead of letters. The firstbletterbiscok, but it converts every letter in a number

  It's very strange. Try contacting Apple Care phone number: (800) 275-2273

• Unable to take backup on Windows 7 get error code 0 x 81000019 and message backup Windows found errors on the media during a backup on it and can't use it for additional backups.

  Original title: backup Windows found errors on the media during a backup.

  original title: backup errors

  Whenever I try to do my monthly backup I get the following messages

  Backup Windows found errors on the media during a backup on it and can not use it for additional backups.

  Pleas write the following label on a blank media and insert it into D: /.

  I did and then he asked me to get in shape, I say OK and I get the same message on the media errors and I put another disc and get the same problems again. I can't find out what the problem is, what can I do to fix this problem and get a new backup?

  I now have an error 0 x 81000019

  Hello

  You did changes to the computer before the show?

  Method 1: Check if the shadow copy volume is running
  (a) click Start.
  (b) in the search box, type Services.msc.
  shadow copy Volume c) right-click and go to properties.
  (d) select Auto (Delayed) in the start menu type in the menu drop-down.

  Method 2: Clean boot
  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.microsoft.com/kb/929135.

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  Check all your drives to NTFS.

  This problem may occur if the drive is not NTFS format.

  Please follow the steps mentioned below to convert the reader:

  Using the Convert command

  1. click on the "Start" button, click "all programs" and click on "Accessories".

  2. right click on "command prompt" and click "run as administrator".

  3. in the window "Administrator: command prompt", type the following command and press ENTER.

  CONVERT %Drive% letter: / FS: NTFS

  letter of %Drive% is the driver that you want to convert. For example, type the following command to convert drive F to NTFS:

  CONVERT F:/FS: NTFS

  4. when the following message appears in the command prompt window, type the volume label of the drive that you are converting, and then press ENTER:

  The type of the file system is FAT.

  Enter the name of the current volume of reader letter %Drive%:

  Type any string of characters for the Volume name. If you simply press ENTER, it will affect 'Local disk' as the default Volume name.

  5. when the conversion to NTFS is complete, the following line appears in the command prompt window:

  "Complete conversion".

  6. restart the computer and check the result.

  Hope this information is useful.

• Animate with greensock, text effect

  Hello, I am trying to build banner in Adobe animate with greensock.

  I do positioning to animate it and after that I do everything with the code in the first block of the timeline...

  Most of the transitions are with Y year X (left, right, tilt, rotation, low and high), opacity with alpha as well as certain triggers that make smoother.

  (is there a list of other commands that can be used in the workaround?)

  I want to make the text in a kind of effect... type each letter after another, what can we bij animate and/or greensock?

  I saw a plugin of breath, but I don't know how to use that in the lively...

  Maybe someone has some issue or perhaps answer?

  Welcome marcel

  To animate text in Adobe animate, if you use fonts custom, your best bet is to divide your text twice, convert each letter to a movie clip symbol, distribute video clips of layers and animate each of them with their own tween.

  If you just want they appear one by one, without any sort of bland or movement, you can skip breaking apart each letter in video clips, keep the text on one layer and reveal it with a mask instead: How to use layers of mask in Adobe animate CC

  If you use a dynamic text, there would be other ways to reveal with the code, but I'm assuming that you are using the static text because I know how customers love their custom fonts.

  Alternatively, if you're comfortable working outdoors to animate, for text effects of animation with Greensock... impressive the plugin SplitText is amazing for DOM elements if you use web fonts for your project: GreenSock | SplitText (Please note that this will not work in Animate, that uses the canvas).

• 60 SX and PES 11 (a charlesg50116243)

  Using of PSE11, shot with Canon SX-60. ACR update need to process raw files.

  The SX-60 HS requires at least 8.7 ACR, which is not compatible with any version of the EP except PES 13. If you have three options: upgrade to PSE 13, use the canon software to do your raw conversion rate and only use PSE for further editing of the converted files or download the standalone and free Adobe DNG converter, which lets you make the DNG files that your version of the raw converter can understand.

• What settings are available when you use PDF Pack?

  Hello

  I look at the PDF Pack service for a customer and since there does not exist a demo/trial version that I see, I wonder how much control you have on the way in which a Word file (for example) is converted to PDF. For customers with distilling that we send them our joboptions files to adapt their PDFs to our requirements, but using service PDF Pack are there similar options available? Can't see any information about it.

  Thank you

  Iain

  Hi Robinson, lain

  Adobe PDF Pack does not offer the same options for customizing a conversion to PDF making Acrobat. It is a fairly simple conversion: select the file you want to convert and let the service do the rest.

  Best,

  Sara

• Alignment of VMDK ESXi

  VSphere 5.0 will be * ONLY * be without service console.  STILL, some tools require access SC, how VM Ware will address these tools?

  We will be able to run mbr align tools to align the disks, or will there be resources integrated into vSphere 5 at this address.  If it is not treated BEFORE the release of vSphere, this will be a serious problem because we have no way to align the disks...

  I have not used yet, but I think that VMware Converter 5 lets you align the disc.   I found this blog with some print screens, http://www.thelowercasew.com/fix-partition-alignment-with-vmware-converter-5-0-beta.

• Conversion of PDF to Microsoft Powerpoint

  I can't find where comvert PDF to Powerpoint, I have word and excel

  Hi Mwnash,

  I think you are using Adobe Reader to convert PDF to powerpoint, I would like to confirm here converted to Powerpoint functionality is not available via Adobe Reader.You need to use the web browser for the convertion of powerpoiint. Another convertion like (Word, Excel, RTF) would be available via Adobe Reader.

  Please follow it mentioned below for the conversion process

  1. Open any web browser
  2. Go to http://exportpdf.acrobat.com
  3. Sign in with your credentials.
  4. Choose the PDF file by clicking Select PDF file
  5. Choose the option of conversion (PowerPoint in your case)
  6. Click on convert

  Let me know if that helps, if you have any questions do not hesitate to ask.

  Kind regards

  ~ Dominique

• All Oracle products

  Hello
  
  I am looking for a complete overview of Oracle products.
  
  Different products and how they are linked together. I m hoping (ouch) there is somewhere a presentation puts it all together...
  
  
  
  For example:
  
  -Database and options
  -Weblogic
  -E-Business suite
  -exadata
  
  and so on...
  
  Kind regards
  
  Peter

  Peter wrote:
  This could be one by the presentation of the product.

  Imagine a sales person who is new to oracle, which has a team of consultants oracle behind him. These consultants are all areas... eBusiness, weblogic, RDBMS. I'm looking for, so a way to get this person kick started on Oracle products

  Its going to be a long way for this type of sale, let me tell you this. Each product in itself is an ocean and its going to take quite a long time for a novice to get their hands on them. The ideal would be to watch OTN (Oracle Technology Network) Internet Oracle site and find the * faq on each product and also to read technical white papers for each of them. Instead of going for all at once, I would rather the person to read about a product at a given time and also, make him sit and talk with oracle technology consultants who can give a better idea of each product in few words in a face to face interaction.

  HTH
  Aman...

• Interpolation of movement in gray

  I am doing a project for class and I'm not terribly intuitive with Flash, please bear with me while I try to give the information that I hope you will have to help out me.  I am using Flash CS5.

  I am a kinetic typography project. I need letters move along a path, I have drawn with the pen tool.  I drew the path.  I have the letter.  I converted the letter of a symbol.  I have created a guide layer and my pen tool path is.  I click on the layer with the letter and the letter is right next to the stage.  I have 30 images created and an initial keyframe in the first frame of the timeline.

  When I right click on the letter, create a motion tween is gray.  When I right click on the layer containing the letter, the motion tween create is grayed out.  When I add another keyframe at the end (frame 30 in this case) and try to right-click, there is always grey.  I tried clicking on the guide, letter, recreating the symbol... What Miss me?

  You are welcome.  A problem with interpolation again (hearsay from me), is that they are not intuitive to use.  With the classic tween, it is a simple matter of beginning frame at the end and made, and it is used for most people for interpolation based on the timeline.

  It is possible that the approach you have taken is not the way forward during the creation of the trajectories for the interpolations again.  Here is a link to a video demonstration using interpolation again with a trajectory.  It seems that the path is not in the same way that you have tried if you have the path on a separate layer.

  http://www.YouTube.com/watch?v=4-BIlFiy_DY

  If she is more interested as grayed out options were correct.

  I hope that if you showed your instructor the problem you had you would get no disgrace shown for your solution, especially if you have learned to do what you were trying to do... and it can even teach your something instructor.

• Hello ADF read only form

  Ok
  
  I'm using Idev 11 g
  "ADF read-only Table" to list 5 records and 5 columns of data.
  
  Records are displayed. BUT, off 5 Columns - a column cdate Date. and I want the USER to be able to update the Date column (don't forget that it's READ only table).
  
  Issues related to the:
  
  1 > 11 g what are the steps to convert this column to Date only in the form of input text so that the user can update the date
  
  2 > ADF this SINGLE table DROP reading does NOT come with button submit automatically. Since then, if I am able to convert / and LET the user be able to change the DATE, THEN I should be able to PRESENT this table alone RERAD to update the DATE in the database. HOW can I optimize button "SUBMIT" for this TABLE READ ONLY gets presented WITH the new date. ??
  
  Finally, BUT IMPORTANT. Suppose that I have to create a FORM WITH 5 ENTRIES TEXT. Actually I FORGOT TO select the CHECKBOX "AUTOMATICALLY LINK THE FORM INPUTS to BACKING BEAN OPTION" in the creation of JSF page.
  
  Now, JSF page WAS created with the values of INPUT 5.
  
  Now, I realized, oops I forgot select the Option 'Auto BIND.
  
  
  Question: WHAT ARE THE STEPS, I IMPLEMENTED THE LATTER to POWER LINKING THESE 5 FIELDS of ENTRY of TEXT IN THE SUPPORT of the BEAN as PARAMETERS to BING?
  
  THX
  pp

  Interesting... Check to see if it appears in another section of the property inspector. Otherwise, you can add links support bean 'manually' as follows:

  (1) in the jspx page add a binding property to the tag af:inputText. Example:

  backing_HrMain is in this case your backing bean and myINputText is the RichInputText variable in your backing bean

  (2) in your bean support add the RichInputText variable myINputText and getter/setter for it. Example:

  Private RichInputText myINputText.

  {} public void setMyINputText (RichInputText myINputText)
  this.myINputText = myINputText;
  }

  public RichInputText getMyINputText() {}
  Return myINputText;
  }

  Nick