copy dirty

Similar Questions

• copy files from my C drive to my external drive error E 0x800718ac3: the volume is dirty?

  Original title: can anyone help with this problem error 0x800718ac3: the volume is dirty?

  I am trying to copy files from my C drive to my external drive E using the operation drag and drop method. That's what happens "error 0x800718ac3: the volume is dirty" can you help me?

  Hello

  1. What is the full error message?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  4. What are the names of files and the exact location of the files you are trying to copy?

  Method 1:   Format the external drive of E and see if that helps.

  Reference:

  Formatting disks and drives: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Format deletes the data on the disk. Be sure to back up data before the format.

    

  Method 2: You can check the external E drive to find errors.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Reference:

  Check a drive for errors:

   http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

• Burner CD DVD error dirty

  Bought a laptop HP Pavilion 17 "last Christmas.  I was facing DVD hard drive since then (proably more than 1000 so far).  The DVD - RW has been intermittent and have used external DVD RW.  Portable DVD burner returned an error saying today 'CD burner dirty' and wouldn't read DVD.  Is there a solution to clean easily, or should I buy another internal DVD unit?  Thank you

  Hi @JFish53,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand you are trying to copy DVDs to portable hard drive, but it has stopped working and gave you an error message "CD burner dirty."

  Here is that a document can help:

  HP computers - drive cannot read disks (Windows, 10, 8)

  Let me know if it helps.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• HP Pavilion TouchSmartNotebook: Copy file fails-then recovery

  Replaced the bad drive HARD 750 GB with a HDD1TB, after installing the new HARD drive, inserted the recovery disc 1, and then asked for disc 2, and then @ 74% a box came up saying: copy the file fails.     From: D:\PRELOAD\BASE22. Stormwater management at: Z:\RM\Image\BASE22. SWM press ok to try again, tried it, same message.  I'm at the end of my rope with this PC. Help!

  Hey @geegeesgirl

  Because you got a bigger than the original HDD, it shouldn't be a problem.

  In my opinion, the two most probable reasons for the problem are device faulty OR defective DVD player support

  All the possible reasons for your problems with the recovery are:

  -new HARD drive is defective [highly unlikely but should be checked, I know you did a test already but don't know if was a short or the complete.] If you have not yet made the disk HARD full component test, please do so.

  -another component re. HARD drive is defective - bad connector or dirty parts [highly unlikely because it would have shown the problems when copying 1 disc DVD]

  -defective recovery media [media you received is fake - not to your PC, collate (call) suppliers to probably get a new one in back of these you have]

  or the DVD disc is scratched]

  Remove the current DVD drive and check it for scratches as already suggested above. If the disc is scratched, you can try to repair the disk using an optical disc repair kit. These types of kits use special chemicals that is qui se lier bind to the surface of the disc, then fill scratches.
  
  Clean the disc with a soft, clean water (very small amount) and the fabric. Wipe from the center of the disc to the outside edge. You can also use the cleaning disc kits or kits restore disk from your local computer store. These kits sometimes produce better results than a cloth and water.

  -integrated DVD drive is defective [less likely... but you can test using the UEFI diagnostics hardware - component test , or with another media; you can try to clean 'the eye' player; if you have, you can try using a DVD external USB device instead of inside]

  Details > http://support.hp.com/us-en/document/c03483233

  If you've tried everything but nothing works, I fear that you will need to bring your computer (or ship it) service - repair center authorized HP. If you don't know where such a Center, please contact HP support for help to find a. Here's more information:

  > http://support.hp.com/us-en/document/c00372730

  > http://www8.hp.com/us/en/store-finder/find.do?bs=SR4&type=authorized

  > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  > http://www8.hp.com/us/en/services/consumer/carepack-overview.html#rightplan

  I hope this helps.

• My photosmart c309a print or copy black ink. I replaced new w ink but still does not

  I have a mac.  My photosmart 309 c has suddenly will not print or copy of black ink.  I cleaned the print heads, tried to align (not that), went out & soak the cartridge printing and eventually replaced w / new black ink.  Still nothing!  When I print, I get a black ink when I try to align, but nothing.  Color will print.  Same problem when I try to copy - no black but will get color.  What should I do?

  I finally had time today to try the method of back.  It worked!

  I took out the print head, continually ran hot water into the Pan so that the water has never been dirty (about 1 inch of water), has run a small flow of water in the black on the top screen that I determined that I had nothing to lose, gently dried the electrical parts and put it immediately into.  Turned on the printer, he crossed the alignment, etc. and printed black (and colors).  Just copied too dark.  It took me about 10-15 minutes for the whole process.

  Hope this works for others.  Thank you all for the input.

• where can I find driver DVD digital copy protection, decoder, card vidio

  When I try to play a vidio on windows media player, I get an error message that I need to update my DVD decoder, digital copy protection and vidio card. I don't know how to do this.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to troubleshoot problems that occur when you play a DVD in Windows XP

  http://support.Microsoft.com/kb/308012

  To prevent the illegal creation of digital copies of DVD, information on most of the DVDs are blurred. Your DVD decoder and Windows Media Player have software to copy protection that decodes the information on the DVD just before posting. If this software does not start successfully, you may receive this error. Remove the DVD in the DVD drive and then reinsert. This will force the copy protection software to reset.

  While the DVD is out the disk, make sure that your DVD is clean. If your DVD is scratched or dirty, the DVD player may not be able to read it correctly, and you may receive this error.

  If this does not work, try the following:

  one)

  If you have been able to play DVDs on your computer before and you receive this error message, you may be able to solve the problem by restarting your computer or Windows Media Player.

  (b)

  If you receive this error message the first time you try to play a DVD, you're not a DVD decoder installed, or your decoding software may need to be updated. In addition to your DVD - ROM drive and playback software, you must have a software or hardware decoder to play DVD decoders. devices and their drivers are available from third-party manufacturers. For more information on the software decoders, see decoder DVD plug-in. If you have a plu decoder installed, contact the manufacturer of the decoder to obtain an updated version that is compatible with the operating systems Microsoft Windows and Windows Media Player.

  You can visit follow them the links that describe on the problems of Media Player.

  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0094.mspx#E3B

  Also, look at the Media Player Plug - ins - http://www.microsoft.com/windows/windowsmedia/player/plugins.aspx

  Take a look at- http://answers.microsoft.com/en-us/windows/ee405471.aspx

• Reinstalling windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd.

  Setup cannot copy files?

  I did a reinstall of windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd. Please make sure the disk is in the e: drive and try again. I can locate the file and find no problem sound on the disc. Here is a list of the files that gave this same error.

  migregdb.ex_
  icwconn1.ex_
  ICWCONN2.ex_
  INETWIZ.ex_
  icwhelp.dl_
  icwutil.dl_
  icwrmind.ex_
  ICWDL.dl_
  icwx25a. COURIER
  icwx25b. COURIER
  icwx25c. COURIER
  ICWIP. COURIER
  Phone.ic_
  Phone.ve_
  State.ic_
  MSICW.is_
  MSN.is_
  support.ic_
  Msobshel.ht_
  ISIGNUP.ex_
  icwtutor.ex_
  icwres.dl_
  trialoc.dl_
  Oobeinfo.in_
  Oemlogo.gi_
  Mouse.ht_
  ISP.ht_
  Oempriv.ht_

  I know that the volume control does not work, and that the windows sounds are not listed, if you try to change the sounds on the system. As the noise of opening and closing session. The drive installed on a different hard disk on the same computer without error, it should not be dirty or damaged. If anyone can help with this please?

  JOEY

  To the file copy stage of the registry would be game.  It could be a permissions issue, you could mount the drive in a different Windows NT installation type and set the permissions.

  John

• What to do if the copy of Windows is genuine when MS wrote that is not

  I received the message "this copy of Windows is not genuine".  Windows 64 bit Vista came installed on my laptop when I bought it almost 2 years ago.  Why I get this message now?  MY COPY IS AUTHENTIC.  What am I supposed to do?  I'm not a geek & dirty with records or something like that.  I find it very upsetting that MS did something like this & there is no where & no, you can call to get them to do it right.  I don't have to understand something like that by myself.  If Microsoft will do checks like that, they should do things or provide a toll-free number for when they go wrong.

  Hello

  I would say allowing you to run the Microsoft Genuine Diagnostics tool then copy and paste the results into an answer here for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Also I suggest you to check your product key and report to Microsoft about the issue.

  Check out the following link to report to Microsoft.

  https://www.Microsoft.com/en-us/howtotell/CFR/report.aspx

  See also the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• OfficeJet Pro 8500 has vertical line from top to bottom after a copy or scanning via adf

  Each copy or scan do using the automatic document feeder to my HP Officejet Pro 8500 a shows a vertical line from top to bottom left of each page. I have cleaned the printer at all parts of the feeder, - nothing dirty in fact found. When I copy or scan the glass plate there is no vertical line on paper.

  Anyone have the same experience with this printer?

  Usually if the scanner works on the dish, but product line in the scans from the ADF, it's because of something on the glass.  Have you tried to shine a flashlight down on the surface of the small approximately 1 in. piece of glass on the left side of the bucket?  This is the strip of glass used for the ADF.

  Like trying to clean the white strip, located on the lid above the glass of the ADF, well clean to make sure there is no debris on the support that can cause this line appears.

  * Make sure that the printer is plugged into a direct socket, rather than a surge protector.  The 8500 has protection against overvoltages integrated in the device and an another surge in the circuit protector can sometimes cause lines.  However, usually this causes lines in both ADF and flatbed scans.

  There is also a document provided by HP with the steps to troubleshoot issues when a line is present in the copies/scans.  The document can be accessed here.

  I hope this helps.

• error 0x80071ac3: difficult to copy the files from my old, but still working, USB

  I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

  I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

  Hello

  Files that cannot be copied are in bad clusters.

  Try running chkdsk x:/b

  The /B switch will cause the disk check to reassess the bad clusters and try to fix them again.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Copy large amounts of data at 128 GB Micro SD card

  I have a 128 GB SD Micro card in the format exFat32. I tried to copy my music libray on the card for use in my Galaxy S5. My music library is 103 GB. I can't seem to copy more than about 5 to 10 GB before out craps and give my mistakes about corrupted data or the disc is dirty. I reformatted and ran chdsk repeatedly. I tried to copy from the PC to the card via the port USB, tried to copy from PC to the card with the slot of the card reader, tried syncing via wifi; all the methods reported the same result. I even bought a new card ansd still have the same problem. I even used 2 different laptops... once again, all methods brought the same result. Can someone help me?

  Mm... you have a smaller capacity card that you can try in exFAT32? In the meantime I'm going antiquing because (as the owner of a Galaxy Ace) I remember seeing something about it - bad is I don't know where! Maybe another owner of Samsung Galaxy's advice. Have you tried Samsung support?

• Easy transfer - tool cleaning or copy of data

  Easy Transfer transfers blindly * / settings files.  If the old PC is bloated with crapware, malware, software of garbage,... it's an effective way to transfer or I'm better to manually copy (Documents, photos, music, videos, Favorites, links, PST files,...) to avoid problems of migration for a PC to another?

  Easy transfer is designed to facilitate the transfer of your DATA and settings to another computer.  That works as well when you replace a hard training or re - build a system.  NOTE that it does NOT copy the applications (programs).  For what it's designed, it does a great job.

  I use it quite often.  If the settings on the computer are dirty upward and are part of the problem, or I wasn't capable of first clean malware, I won't use Easy Transfer because he repeated bad settings that may be causing the problem.   In this case, do drag and drop your files to an external hard drive to backup data.  Do your re - build.  Install the applications you want.  Then, copy your data back.

  I rarely re - build a hard drive because of the infection.  There are enough good tools out there, and Windows 7 is so durable it can almost always be cleaned.  My favorite tool is ADWcleaner.

  Usually, when I use Easy Transfer, is when the OS is so corrupt that I can't fix it or I replace a hard drive.  If you are replacing a hard drive go big.  500G is a good place to be.

• HP Officejet 6500 Wireless-black line down the copied sheet

  With the help of HP Officejet 6500 (E709n). When the automatic document feeder, copying copies resulting dating a (thin) continuous black line from the top of the sheet for any length, to 1 3/8 "from the left edge of the worksheet. Line does not appear when you copy directly from glass. Am not able to determine a way to access a possible source of problem (most likely a dirty friction roller). The original user manuals do not address this problem. Search for a solution. Thank you

  Hello lentill24.

  Please, see this document.

  http://support.HP.com/us-en/document/c01612462

  See you soon!

• Get a 'file corrupted' error while trying to copy files to the flash drive mp3

  * Original title: corruption of copy error

  I am trying to copy mp3 files to my music on a flash drive folder and I get an error "damaged file".  Only files is not corrupt, he plays very well on my system so WHY not copy?  I had dealing with "disc is dirty" and "file is corrupt" questions for THREE DAYS and, if that is what is happening with Windows 7 (the upgrade of Windows 7 is relatively new) so I'm going back to Vista!  Someone please help me with this.

  Hello

  I suggest you to go from the following link and check if that helps.

  Convert a hard disk or partition to NTFS format

  http://Windows.Microsoft.com/en-us/Windows7/convert-a-hard-disk-or-partition-to-NTFS-format

  I hope that helps!

• Calc help - copy all the accounts from Parent to child

  I was copying some accounts from Parent to child by listing each account using a Sun cross. The child, that I am focusing the attribute is "Open". But now I need to copy all the accounts from parent to child, and there may be hundreds of accounts. Is there a way to move all of them at once rather than list them one at a time?

  DIFFICULTY (& "ScenarioA", "Esityksen", CurrYr, Jan,@RELATIVE("Entity",0) AND @Attribute ("Open"))

  'Sales' = 'Dirty'-> @Parent (@Currmbr ("Entity"));

  "Salary" = "salary"-> @Parent (@Currmbr ("Entity"));

  EndFix

  Of course, exchanging places with your accounts and periods.

  DIFFICULTY (& CurrYr, "ScenarioA", "Esityksen", @RELATIVE("Account",0), @RELATIVE("Entity",0) AND @Attribute ("Open"))

  "Jan" = "Jan"-> @Parent (@Currmbr ("Entity"));

  EndFix

  Sabrina