Copy / paste doesn't work anymore

Similar Questions

• copy paste doesn't work only with windows 7, office 10

  Copy / paste does not work in any office of 10 nor IE work or anything.

  I deleted the driver for my MS keyboard and re booted several times - nothing

  Not sure when this started, but it's been several months now.

  I tried sfc/scannow running, but that did not help either one.

  Any suggestions?

  Hello

  1. Modifications were made to the software or the hardware of the computer before the show?
  2. The problem is specific to the text copy and paste? Are you able to copy/paste the files in the folders?
  Method 1:
  Start the computer in Mode safe mode with network and check if the problem persists. See the link below and follow the steps.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
   
  Method 2:
  Perform the check and the clean boot if this problem occurs. If the problem does not occur then determine the service that is causing the problem and consider to uninstall this application if you do not use. See the link below and follow the steps.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Note: After you have finished troubleshooting follow step 7, mentioned on the web page for the computer to boot into normal mode.
   
  Method 3:

  Try to create a new user account and check what is happening. To create a new user account, please refer to the link below and follow the steps.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Hotkey Ctrl + insert (copy) and Shift + Insert (paste) doesn't work anymore

  Hi, keyboard shortcut Ctrl + insert (copy) and Shift + Insert (paste) no longer works. WHY?

  Hi jarmom47231314,

  I'm sorry, but this shortcut key for copy and paste is available in MS Reader.

  You may submit a feature request for the same:

  Feature request/Bug Report Form

  Kind regards

  Ana Maria

• Interpolation: copy / paste doesn't work is not on a particular Tween properties

  Hello

  I do very simple tweens with 'new' (non-conventional) method.

  I want the object to move only after a while so I'll try to reproduce the starting position to a keyframe later but, for some reason, it doesn't work on my project while working on a test file.

  I have copy and paste properties of the first image to another key image, but it is not applied at all.

  1 = the starting position

  2 = keyframe with properties stuck but the position is still the same (between 1 and 3)

  3 = end position

  Any reason why it wouldn't work. Thank you.

  Solved!

  I added some ease before trying to move keyframes and this is why it does not work.

  Thanks for your tip Kglad!

• Copy-paste doesn't work does not correctly

  If i:

  (1) copy - paste something.
  (2) copy - paste something else.
  3) highlight something else to stick, it sticks the selection of #1 instead of this selection.

  Drives me crazy, of course, any help would be appreciated.

  Richard

  Here's how to do a system restore:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.bleepingcomputer.com/tutorials/tutorial95.html

  And a very good tutorial on cut, copy, and paste in the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Copy / paste doesn't work is not in Microsoft Office word.

  Original title: Windows 7 won't let me copy or cut and paste, all of a sudden he stopped doing work with control etc. does not help it doesn't let me do in the notebook, but just not in word

  all of a sudden, it stopped to work with control etc. does not help it doesn't let me do in the notebook, but just not in word and I need help too plese

  Linda

  There's a Fixit here:
  http://support.Microsoft.com/kb/921541/en-us/

• Copy / paste doesn't work is not in design mode...

  I work on a project and we have to use a layout that is not one of the layouts of dreamweaver. I use DW version CS5 and I copy and pasted a max design layout in a new file called index.html; Also, I generated a CSS page and copied this information also to keep the style. All is well in live mode view, but now the problem I have is that I'm not able to change my index.html in design mode, I can modify it in code view but not design mode and I need to change it in Design view to add images and other style I want. What can I do to fix this?

  Which is usually caused by elements in the code being out of order or nested inside each other by accident. Usually, the cause of an accidental drag and drop.

  You have the page downloaded somewhere we can take a look?

  If not, you can run the code through this validator: http://validator.w3.org/#validate-by-input

  Who will notify if you any errors in your code.

• VMWare Player 6 - copy / paste doesn't work is not between the guest and host

  Hi all

  I am unable to cut and paste (text) or drag-and - drop (files) between the client and host and vice versa.

  I am running Windows 7 (32-bit) guest on a host Windows 8.1 (64-bit).

  Everything else works to date works and VMWare Tools are installed.

  I spent a few hours searching and have not been able to determine if this is a known issue or just a mismatch in my environment/configuration.

  Any suggestions or comments would be most welcome.

  Kind regards

  Hoops

  Hi all

  Seems I solved the problem.  It comes down to User Account Control (UAC) prompt (in my case Windows 7 (32 bit).  I have disabled UAC in the comments and drag and drop / cut and paste now works like a charm.

  Autologin also now works. I had not tried to set up that more early.  That's where I read an article to disable UAC for AutoLogin work.

  My VMWare tools icon now displays in the system tray.

  I hope this helps someone else out there!

  Thank you...

  Hoops

• CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. The other shortcuts work fine.

  CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. If I go to history > recently closed tabs and click on something, it works, it's just the keyboard shortcut that broke. The other tabs keys work fine.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• copy paste no longer works

  Copy paste no longer works after update macOs Sierra...

  Any idea?

  THX Andrew

  Try stopping and restarting your machine

• copy / paste does not work in El Capitan

  Since the upgrade to 10.11.6 the functions copy / paste don't work, either by the keyboard shortcuts or the Edit menu.

  Then you have a bad installation.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  Boot to HD recovery: restart the computer and after the buzzer, press on and press and hold the

  Command and R keys until that Menu Utility screen appears.

  3 repair the hard disk and permissions: restart the computer and after the buzzer, press on and hold down the command and R until the Menu Utility screen opens.

  When the Utility menu, select disk utility, and then press the continue button. After loading disk utility select it

  indented (in general, Macintosh HD) entry of the list to one side.  Click first aid button in the toolbar. Wait for the operation

  is over, then quit disk utility and return in the Utility Menu.

  4 download and install OS X El Capitan 10.11.6 Combo Update.

  5 reinstalling OS x: reboot of HD recovery Select reinstall OS X in the Utility Menu and click on the continue button.

• Why ctrl + shift + t doesn't work anymore?

  Why ctrl + shift + t doesn't work anymore?

  The problem is solved in the next Firefox 26.0 and not 25.0/25.0.1

  For playback as Bugzilla is not a discussion forum.

  Bug 858975 - Shortcut key for Inspector is conflicting with shortcut key for undo close tab
  

• Qosmio F20: Featured work Touchpad scroll doesn't work anymore

  Hello

  I have a Qosmio F20 and only had it for less than a year, I've always used the touchpad and the quick launch feature, never changed anything in the settings of the touchpad, or major changes in the operating system, I have a problem now!

  the scroll function working keys doesn't work anymore, you know how the right side is scrolling up and down and low to the left/right scrolling, now it doesn't work... my brother was using my computer and he has installed a bluetooth, infrared driver program, he used a mouse USB and install Nokia PC suite.
  NOW what should I do? HEEELP!

  Thank you.

  Hello

  Brother have installed you a large number of applications and also a USB mouse.
  Who knows what it changed on your laptop.

  If the pad touch scroll function does not work so I guess that the settings have been changed.
  In your case, I recommend to check the touchpad settings.
  You should find your mouse over settings in the control panel.

  As far as I know, you can find these settings in the Toshiba touch and launch.

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Why the rejection of multiple photos doesn't work anymore when you change pictures?

  Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

  Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

  Have you tested, if the problem occurs only in an Aperture library or libraries opening?

  Create a new Aperture library to test and see rejection, so it works.

  If it does not work in a new library either, I got trash Aperture preferences.

  In preferences file is now in the container folder in the user's library.

  Try this:

  • Leave the opening runs.
  • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
  • and the ~/Library/Preferences/com.apple.Aperture.plist file

  Your user library can still be hidden. To reveal the hidden user library:

  • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
  • Select your folder user/home (with the House icon in the side bar of the Finder)
  • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
  • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
  • Open your folder, then the library folder, then the containers.
  • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
  • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

  Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  Re: Viewer has been reduced mode Photobook