Copy the file in "res" to the file system

Similar Questions

• copy the operating system - backup drive - way to deal with

  I had to do this on 2 other newer computers purchased because no disk operating system was included in the purchase price, and I had to provide my own disks and copy it to myself. This compaq computer is 2nd hand and the back-up of operating drive was lost long before that I got it. After losing the computer has been reinstalled and registered. I would now like to make a recovery disc of my own to the operating system as a back-up to disk. I did this until my other computers however I was all threw the control panel and can not find the feature or place to start. you give me the path to start the registration process, please.

  You can back up the system disk to an image and get it back on the other two computers.
  because the system can not work in different hardware environments, the backup image must be restored with universal restore. I could not make it clear.
  Learn more about this article.

• Copy the old system to ESXi?

  Hello I have a slight problem with ESXi...

  I want to copy old vmx (Windows Server 2008 + System.vmx team) file to a new system of ESXi.

  After some googling, I found on ovfTool. And that I would need to convertfiles.

  Now, I have a slight problem. The ovfTool does not work. So I can't try this conversion.

  Is someone can please tell me that either have been finding a decent job. (I have read http://www.vmware.com/pdf/vi3_35/esx_3/r35/vi3_35_25_quickstart.pdf) on the old VMwareStasions of loading.

  Or how can I do this? Since I kinda need it...

  Thank you

  Kind regards

  Robin

  OK, I'm going to assume you are currently on a system of ESXi and want to go to another system of ESXi.

  Since you'd already be ESXi on a host, so if you have the storage space, you can use the browser data store to download config as vm and all of its files, store locally and then download them on your new host ESX via the browser to store data again.  No other tool would be necessary, but you must have the storage to contain what you need to transfer.

  -KjB

• Copy a file on Unix remote

  Hello
  
  When you copy the cloned system from one server to another.
  I want to move a folder without tar or compress.
  
  So I typed:
  
  RCP - r nom_repertoire server: dest_dir
  
  The question is: are the reserved symlinks when copying remote?
  
  Thank you very much

  No, symbolic links will not be retained.

  I think you want to use the tar, due to lack of disk space? or you don't want to waste so much disk space?

  You can still use tar, without actually creating archive itself: If you want to do this, you must use a command like this:

  (cd & tar - cf-.) | rsh "cd & tar xvpf-.»

  (Make sure you include all spaces, points, and the quotes!)

  This is not an archive, but immediately redirect the output through the remote system where you will immediately "détarer", and it does not preserve symbolic links.

  Kind regards
  Arnoud Roth

• The behavior of copy (.png files) screen when using TextEdit and printing

  I have long used the method to copy and paste texts and/or pictures to TextEdit and print files .rtf or .rtfd below:

  I use the command-control-shift-4 and the cursor to select things and paste into TextEdit.

  That stopped working in the Sierra.  I tried several methods (PDF format conversion, fall in Pages and Numbers, for example), but nothing worked: the Canon PIXMA MX922 printed on a white sheet and left the box of small characters with text "filter impossible."

  There is no new printer driver on the Canon site; However, there is a new driver IJ Scan Utility and I downloaded it already after that installation of Sierra and the scanner works fine, as also directly print something (e.g. on the Web).

  Now, after several days of testing and I was wondering, I tried this yesterday:

  Instead of the above command, I used (which I do when I want to save it to the desktop) command + shift + 4.  I copied the file .png from office, dropped in the TextEdit, printed, and... IT WORKED.

  Copy and leaving fall directly in the TextEdit and printing, is so not working, but let fall the same screenshot on the desktop and copy and paste into TextEdit and it print shops.

  I noticed several other annoying problems to Sierra, some I've reported here (communities), some didn't.  Business-as-usual: first version of an upgrade is full of bugs, which 'disappear' in future versions, until a new update is made available, the loop continues, continues, and...

  He works here.

• I copied the old file of passwords in the new profile, but do not see.

  Got a new laptop. Copied the content from the old profile to new profile. Most of the old information are there (bookmarks), but I do not see the passwords. I repeated copying the two files key3db and logins.json specifically, but even the passwords saved on my old profile are not there...

  Could you try again in a new profile and copy only the files logins.json and key3db?

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Is there an easy way to copy the content of each message into a folder in a text file (without visiting each email, select, copy paste)?

  I need to scratch the data of a few 1000 + email. How can I believe more easily the content of these emails and either push in text files, or treat them with a script?

  Thank you

  Install ImportExportTools:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

  Copy the messages in a folder, select the folder, tools/ImportExportTools/export all of the messages in the text file / in the single folder.

• I can't download to work - it does not copy the mp3 files to my location (as defined in tools/options) - it gives me a new window with a player - no dwnlo

  I am running windows xp sp2 and I put my site to dowload under (Tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my location of choice on my HD - instead, it opens a new window with a 'player' of fortune and starts to load the player with the MP3 file. The problem is that I have no idea where on my system, firefox has copied this file, so, I can't leave and come back later and read this MP3 file using winamp. I need to hear right then or lose - if I close this new window (with this puny little ' player'), then I lose the download, there where to put firefox on my PC (I have no idea where it is). It's all under firefox 25.0

  I also use FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file, I want to, and downloads of firefox 12.0 (on win2k, sp4) to my location (on my HD), and it gives me the download window so I can watch its progress and have some control over break and resume , and, when it's done, the download window offers me the option 'open containing folder' so I can make sure that where I wanted. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox on winxp sp2 25.0! What gives? I went through and set up my options for XP just like I did with Win2k and everything looks good, but firefox 25.0 don't know just my chosen and always default place to give me fortune player and I am not able to actually copy the mp3 files on my hard drive - it's firerox almost unusable 25.0 since downloading mp3 files is a big part of my use firexfox - please help. I am not able to upgrade windows at this time, and since firefox 12.0 still works fine on win2k, I do not understand what has happened to firefox?

  Hello littleberry, you can click on the link that leads to an mp3 file or right click on the drive in firefox and choose to download the file like that...

• Best way to copy a file in the Finder

  I am really struggling with the Mac interface, after having been a user of PC/Windows for decades.  I can copy/move files in Windows Explorer with ease.  On my MacBook, this simple task seems impossible.  My goal is to copy a file from one location to a specific folder.

  In the Finder, I select the file I want to copy and select 'Copy' from the Edit menu.  I then navigate to the folder that I want to place the file, highlight this folder and select "Paste" from the Edit menu.  He went to put in the parent directory of the file I selected, not the folder selected.  Tried to do this by dragging a file (which is really hard when using the touchpad).  When I fall on the folder I want, once again, place it in the parent folder.  As I was doing this on a network (WD Cloud NAS) drive, I gave up and a PC to move the files where I wanted them.

  This is ridiculous.  I thought that Macs were supposed to be easy to use.  I'm almost at the point of return my MacBook to the Apple store.

  Hold down the Option key while you drag and drop.

• Copy the old Time Machine files to the new disk TM

  Sorry people, I have to ask two (related) questions:

  (1) I have a WD My Passport for Mac drive connected to an Airport Extreme and 2 Macs use for backup via Time Machine. Now, the disk is full. I bought a WD My Book for Mac drive with a capacity of 4 TB and am ready to go.

  Question: can I copy the old files of Time Machine on my new book?

  (2) until now 2 different Macs used the My Passport as a Time Machine drive with no problems.

  Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?

  Thank you very much for your help!

  Question: can I copy the old files of Time Machine on my new book?

  Yes you can, but there is a lot of work, a little complicated, time consuming and not worth the effort for most users.  The main reasons for this are...

  (1) the older backups will take a good amount of space on the new drive, limiting the space on the disk again.

  (2) Time Machine backups for the old files will continue... it will make a new copy of every Mac and then go forward again with incremental backups.

  A better plan would be to keep the old drive on hand for a few months, in which case you need to go back and look for a file. After a few months, you will have a beautiful story from backup to the new hard drive and no need of older backups so you can remove the old disk and keep around as a spare part or use it for other purposes.

  Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?

  While you can partition the drive and save each Mac to a separate partition if you wish, there is really no need to do this since Time Machine will automatically create separate for each Mac backup files.

• Tecra T8000: How do I copy the file vmm32.vxd hard disc to disc

  Hi all!

  I have here my father-Lawa´s T8000. The operating system (win 98) seems to be messed up, it will start only the message that the vmm32.vxd file required for running windows and the lack of Ista´s.

  I found help on the microsoft home page that says I should extract from the original in dos mode win98 cd, but I have no idea witch letter corresponds to the cd-rom drive... Can I change the A:, B: and c: everithing else like D:, E: and so on Wona´t work?

  I'm also a bit confused what it Wonta´t start of the (original)? Win98 cd. In the Bios boot priority is CD-disk hard - ect.

  But it does not start on my xp home cd!
  Any ideas?

  If you want to boot from the recovery of Win98 CD you must first load the accompanying disk.
  This floppy can be found on the Toshiba driver page. After downloading and unpacking you should read the Readme for more details.

  In DOS mode, it is possible that the HARD drive or the CD/DVD drive does not use the same letters as in the mentioned operating system. You can check the contents of the data carrier with dir command BACK.

  But if you are a beginner and do some many experiences I would recommend using the recovery CD.

  PS: The Toshiba Recovery CD is not the same as the original Windows CD and so I don t think you can find the file on the delivered CD of Tosh and will be able to copy it.

• Cannot copy the file 6.89 on Toshiba 250 GB HDD USB external

  
  

  Hello

  First, you should check the properties of the HARD drive. You can also do in under Computer Management disk management.
  Should there have listed everything on the external HARD drive.
  You could further format the disk with NTFS and check if it of possible to copy this file again.

• copied password files doesn't work is not on the second PC

  I looked at information about files of password for FireFox 3.6.x on the web... it's my understanding that it's all in the files key3.db signons3.txt. However, when I copied these files to a FireFox 3.6.x instance on a second PC and launched FireFox, the list of password (under Security) was empty. What other files or procedures are required to export/import passwords from one PC to another?
  In addition, it would be nice to have this feature added to the UI of FireFox in the native address... I'm not comfortable with using an add-in for it that you can never be sure that your passwords are not compromised by the add-in program.

  Firefox 3.6 does not use key3. DB, instead it uses signons.sqlite. You must copy this file and signons3.txt

• Portege M400: cannot copy the files on the disk HARD - can't see any of my files in Word

  I bought the M400 a few weeks ago. There are a number of problems. Adobe reader gives "an internal error has occurred", manual installation of download gives "error occurred in the file zip", download or copy of the files on the hard disk gives error "there is no space" when there are only 8 gig used from 60 GB. Now, I don't see any of my files in Word.

  I can also copy the files from the cd or DVD. I'm in canada mississauga on Horus, usually resident in the United Kingdom, so I'm in a precarious situation because I can't in my office to sort out the issues.

  Can someone advise me please why all these problems are happening, do I have to use the recovery disk? Baz

  > Forgive me but how to put the hard drive in business.

  I think that the Johnny means that you connect the HARD drive to another computer using the external USB HDD controller. These external USB HDD cases can be purchase in every store of the computer.

  However, if you n t need data that are placed on the HARD drive, you could simply start installing the OS from the recovery CD. This will format the whole HARD drive and install the new operating system as well as all the drivers, utilities and software further.

• ENVY of HP dv7: copy the file fails error on disk 2 to 58% HP recovery

  My hard drive in my dv7 ENVY dies for the second time in two years (it was under warranty last time and I was able to fix). I bought the hard drive same exact (Samsung, 1 TB), tested in BIOS, past everything. When I try to make the image recovery with the HP recovery discs I received the last time my hard drive died, I get an error then that 58% on two recovery disc that says:

  Reducer

  Copy the file fails

  From: d:\preload\base24. STORMWATER MANAGEMENT

  To: c:\RM\Image\BASE24. STORMWATER MANAGEMENT

  Press OK to retry.

  I press OK and it does the same thing over and over again. People who questioned him on this same type of error seem to get anywhere here, but what choice do I have? The hard drive is the same size, same manufacturer, same model, it should have the question of reimage the system on a hard drive more small, right?

  Am I just out of luck on that? So frustrated.

  englejas

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on recovery issues and wanted to help.
  
  Here is the link to the tool of creation of win8.1 media: installation media to create for Windows - 8.1 help Windows

  Understand, however, you might encounter a problem installing using the media created from this tool.

  You have a version of OEM HP of Win8 installed on your PC, and this means that the product key that is embedded in the motherboard UEFI firmware is OEM, not retail.

  While the media created from this tool SHOULD be activated using this key, there is no guarantee he will do.  If it is not the case, you can use this tool to recover your product key and try to enter it manually: Download Windows OEM Product Key Tool - MajorGeeks

  IF it still does not work, then your only recourse would be to order a new set of recovery from HP discs.

  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
  If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
  ========================================================================