Correct mapping between OID and OAM

Similar Questions

• Error: No mapping between account and the security of ID names was done when trying to setup of Dragon NaturallySpeaking 10.

  Original title: no mapping between account and the security of ID names was done.

  I am trying to set up my Dragon NaturallySpeaking 10 program. My computer (Dell Studio 1550 on Win 7 64 bit) has been recently reset and during the reinstallation of the DNS and the subsequent fine adjustment, I came across a page that wanted my username and admin password.. I plugged in and it came up with the error message: "no mapping between account and the security of ID names has been done." There is one account on my computer and my admin. account. If something has been lost in resetting? How can I fix / security ID card? Thank you for your help.

  Hi Hasky620,

  I recommend you contact the support of Dragon NaturallySpeaking for assistance:

  http://www.nuance.com/support/index.htm

• Differences between OID and OUD

  Hello gurus,
  
  What are the differences between OID and OUD.
  
  Why Oracle release two LDAP directories. Please let me know.

  These two are two LDAP directories.

  Where IO is the dependent database and OUD is not.

• Attribute mapping between ldap and ecm11g internal user profile user

  Hi all
  
  I use ucm11g, is there a way to map between ldap and ecm11g internal user profile user attributes? I tested with an attribute named homephone wls embeded LDAP, create the attribute homephone in ecm11g the user after login profile, I can't find the value in the ecm11g user profile.
  
  Best regards

  In earlier versions, there was LDAPProvider which was replaced by JpsUserProvider to 11g. This component allows you to do a bit in the interface, but there are a few more options which do not seem to be documented. For example, if you have a HomePhone field and enter 123456789 inside and then empty, by default, the JpsUserProvider component will not empty field the Complutense University of MADRID. You can change this by entering ClearMissingAttributes = true in the provider.hda file. Or if you want to use the credentials, you will need to change provider.hda with ProviderCredentialsMap = name_of_map (my source for the latter was the ECM blog at http://blogs.oracle.com/ecmarch/2011/03/).

  For more information on JpsUserProvider, look in the Administrator's Guide:

  When to add JPS provider: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10792/c02_settings007.htm#CSMSP496

  Adding a JPS Provider: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10792/c02_settings007.htm#BEIIAHHI

  I hope this helps!

  Frank.

• Mapping between Admin and WLST

  Hi all
  
  I have some .txt Admin (running with WebLogic 8.1) files, using the following commands (for a batchupdate of wladmin):
  -CREATE an mbean...
  -SET - mbean...
  -INVOKE - mbean...
  -CREATE_POOL...
  
  These Admin commands should be replaced by WLST (working with WebLogic 10.3) commands. I'm wrong if I think that the first three commands can be replaced by these WLST editing commands? [http://edocs.bea.com/wls/docs92/config_scripting/reference.html#wp1179175]
  create
  set
  invoke
  
  How should I replace the last command (CREATE_POOL)?
  
  
  Best regards
  József

  Yes, you should be able to replace the first three with the commands you listed. With regard to the creation of a connection pool going, take a look at the following example:
  http://download.Oracle.com/docs/CD/E11035_01/WLS100/jdbc_admin/config.html#wp1068516

  Published by: ebergenh on July 29, 2009 10:02

• Mapping data between BI and another Oracle module

  Hello
  
  I'm working on a project for a Government of a county of Florida. We have a problem with project accounting R12 data match with OBIEE 11g database. It is more of a field of marking problem than a problem of integrity of data - for example, 'Customer number' in the accounting of the project is clearly a different data set than 'Customer number' in BI. We know the same data exists in BI but we do not know what it is called and therefore how interrogate him for reporting purposes. Why data marking is so messed up, I can't say, but I was in charge of mapping 'Customer number' (and everything else) in project accounting to the equivalent of the BI field. Supposedly this mapping does not already exist (which seems impossible since someone set up the flow of data between the two parts of the system at some point!). I hope someone can recommend an approach that doesn't end up being heavy and manual. Thank you!
  
  Warm greetings to all,
  
  John

  https://support.us.Oracle.com/OIP/faces/secure/km/DocumentDisplay.JSPX?ID=1274680.1#BODYTEXT

  OR

  Oracle Business Intelligence Applications ETL Data Lineage Guide version 7.9.6.2 and 7.9.6.3 [ID 1274680.1]

  Check this box... It gives you a document of data lineage... Mapping between source and target stage and...

  It certainly helps you the way that you look.

  MAK is useful if it helps...

  Kind regards
  Rayan Vieira

• Relationship between users and roles OID

  Hi team,

  We have created users and roles in the IOM and the synchronization of these OID values. Users and roles create under different containers in OID.

  We have the relationship between users and roles of the IOM. How the relationship between users and roles are maintained in the OID.

  Could you please help me on this. Thanks in advance.

  Thank you and best regards,

  Narasimha Rao

  For 11 GR 2 IOM, roles map to the OID groups if there is a ldap synchronization (between IOM and the OID). I know that it works for IOM 11.1.2.2 and OID 11.1.1.7 (also 11.1.1.6 OID as well).

  Between the IOM and the OID ldap synchronization will automatically synchronize users of IOM in OID. So if you add a user to the IOM it will come in OID under the users container.  You create the role of IOM, you should see a group created under the OID. Similarly, if you add users to the IOM for a role of IOM, it will map/synchronization user in OID OID group.

  (Hope this helps, please indicate your answer as answered if it solved your query)

• Table does not work correctly between LabView and TestStand

  I'm doing a TestStand program that reads data from a LabView VI.

  If I run the VI in LabView, it works perfectly well and generates a table with 18 points in length, the first 3 are numbers between 0 and 10 and the rest being-1 as I intended. Re-run the VI causes the re - initialize correctly and I get a new table that also meets my specifications.

  When I run the VI of TestStand, it works fine once, producing a table with 18 points, the first 3 are numbers between 0 and 10, and the rest is-1.

  If I run the VI in TestStand once again it increases the length of array in 18 each time. In so doing, it fails to write the new 3 numbers and just add - 1 in table 18 times. If I restart TestStand will work fine once more, he repeats the error if I re - run the VI. I don't understand why this is happening.

  I have re-product the error in a separate VI and the order, and I have attached an example in this post. The VI contains all the necessary information (if not, please say so and I will correct it), and TestStand sequence is configured to put all results, I would find useful in the report (as additional results).

  Your problem is your VI.   Specifically the comment nodes.  They initialize on the first call.  TestStand retains the VI in memory.  So when the VI is called again, the comments always nodes have their last value.  You will get the same results if you have VI your ArrayBuild.vi twice appealed.

  The way you use the feedback nodes, they really replace with Shift Registers.  I like your comment nodes, but since you pass the value of the node in the loop, the SHIFT registers are much more appropriate.  Just make sure you initialize your Shift Registers.

• When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  Original title: fingerprint digital mapping

  When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  I tried the fix (http://support.microsoft.com/kb/890737?wa=wsignin1.0) without success.

  Any ideas?

  Hello

  Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?

  If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows XP IT Pro Forums
   
  For more information, see the articles:
  Understand and configure the Welcome screen and the classic logon screen
   

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• No mapping between account names and security IDS made mistake by attempting to use the Task Scheduler

  I have noticed that my msfeedssync.exe were not working or updated so I went to the Task Scheduler to see what was going on and received the number above mapping between user names and security ID error I never use Task Scheduler, but I do not know its also used for RSS updates , I do all my own maintaince so I need only of GI RSS using a 3-year-old dimensions of dell with xp pro and its in tip top except for that shape it came only with a 80 GB hard drive and I've only used 20 concerts in 3 years that I use online for things important and backup storage I hope there is a solution for this because I installed ram to 4 GB and it has a 2.8 ghz Processor blazin fast and is in very good shape all help will be appreciated thanks

  Hello syncere99,

  1. What is the user account in the Task Scheduler are you for the work you are trying to use the Task Scheduler?

  The error code indicates that the user account that was used to create the job no longer exists. This could be because the user account is deleted. I suggest that you remove and re-create a job and check if you have the same problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• No mapping between account names and security IDS was done

  Hello

  I have a laptop of Acer under Vista Home Premium Service Pack 1.  I open advanced user accounts of & assistance, and I saw two names my old & news of the administrator. He used my name as the user name and my new name as the display name, so I deleted the old username & changed to match the full name (the new name).  After the change has been made, I get an error message "no mapping between account names and security IDS was done 26EE0668-A00A-44D7-9371-BEB064-C98683.  Now I can't access control panel to make changes to account. Help & Support in the start menu and Windows Explorer are no longer works. Tools on the toolbar doesn't work or the other.  I can't yet run a virus scan.  I did find something useful from my own research.  Help!

  Thank you
  Cheeszz
  P.S. I also started a McAfee Quick Clean to remove undesirable accumulation of the computer.  He cleaned the keys to an orphan registry, internet cache, temporary files & lost file fragments.  I don't know if he has also nothing to do with the error message.

  Hello Cheeszz,

  Thanks for posting your question on the Microsoft answers Forum.

  Essentially, you get the "no mapping between account names and security IDS was done" is because you now have an orphaned user account. This occurred when you deleted your old username which was still in use by the system under the name of each user name has a unique SID.

  I suggest that run you a system restore point, then you can go back to a previous point in time before you deleted the name of the user.
  Follow the article below for the establishment of a system restore procedure.

  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  You can also create a manual system restore point so that you can restore to that State in case of problems.
  Right-click on the computer icon in the desktop, then choose Properties
  In the left pane, click System Protection
  Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click the System Protection tab and then click on create.
  In the System Protection dialog box, type a description, and then click on create.

  If you do not have a restore point system, try to see if LastKnownGood configuration might work for you.
  Click on the URL link to get help setting up the last known good configuration:
  http://windowshelp.Microsoft.com/Windows/en-us/help/cdb4c0dd-5698-4197-B906-d6a6d413621d1033.mspx

  Please respond and let me know if these suggestions helped get your problem solved or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I received an error "no mapping between account names and security IDS was done" when I try to back up my files on a network drive. Help?

  I'm running off Windows Vista and have a network buffalo drive 464 concert in order to back up my files.  I get the error "no mapping between account names and security IDS was done" after I try to connect with a prompt asking me a username and password in the drive.  I have not defined anything like that to give me this info before accessing my network drive.  I can read, write, store in the drive of everything except to back up my files on the desktop.  What I'm missing or doing wrong?

  Hello

  Please repost the link that is specific to the issues of backup below in the microsoft forum

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Error message "no mapping between account names and security IDS was done."

  I installed an external hard drive 1 TB USB to a desktop networked home.  I use this unit to save the desktop system.  I mapped it as a network drive for my wife's cell phone.  She has full network drive read/write permissions.  I'm trying to set up his laptop to backup over the network to the device using the backup utility provided with Windows Home Premium.  When I try to choose the local backup device on the network drive does not appear as an option.  When I try to configure the location using the networking option, I can select the device but then get the following error message... "No mapping between account names and security IDS was done."

  Hello BrkAwa,

  If the network drive does not appear when you try to backup, this means that the network drive is not mapped on your computer.

  Follow these steps to map the drive on your computer.

  1. click on the computer from your desktop or from the Start Menu shortcut. In the toolbar, you will find several buttons, including one called map network drive.

  2. click on it and the map network drive window opens. First, you must assign a drive letter for the connection, and then type the drive or folder that you want to connect.
  The folder may be located on a computer, or remote server that you access, FTP site, or a shared folder on your computer.

  3. If you want to connect to a remote computer only "-" followed by the name of the computer or IP address and then "------" track of the location of the folder that you want to connect.
  If you want to create a drive mapping to a folder on your own computer, type "\\127.0.0.1\" (this corresponds to the local host) or "\\computer_name\", then the path to that folder.
  Sometimes, when you create a drive mapping, you may need to use a special username and password that allows you to connect to it. In this case, click connect using a different user name .

  4. type the user name and password and click OK. Now, you will return to the previous window. Click Finish and the drive mapping will be created.

  5. If you go to the computer shortcut you will see again once a new disk with the letter that you have assigned is listed and you can access it at any time.

  Map the drive, then check if you are able to use the drive for backup.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Synchronization between EBS and OID

  Hi Experts,

  In our environment for SINGLE sign-on, we use OAM as an SSO engine and the DIO as an LDAP.

  Synchronizing details FND_USER OID, which passes through provisioning profiles and set up a synchronization profile for synchronization of the OID with HRMS tables for first name and last name...

  The question is if we change any username for security-> user-> define the shape, the name is not change a new username (with the changed name) in OID OID and creting a synchronization profile. (Heighlated red)

  Is it OID allow you to change the user name?

  If everyone facing the same issue or aware of the same well let know us.

  An idea really appreciate it.

  Thanks in advance,

  Please see (how to change a user name in an integrated Instance OID applications - when you try to create a new user, an error ORA-20001 (Doc ID 428726.1)).

  Thank you

  Hussein

• What is the best way of updating OID and similar attributes via OIM OAM LDAP?

  Our environment uses IOM provisioning of an OID LDAP that is used by OAM.
  
  Purposes of inheritance, must complete the Oracle "orcl *" attributes and OAM "ob * ' in cases where they use the same or similar.
  
  Example: When a user is disabled in IOM we define orclisenabled = 'false' and obUserAccountControl = 'DISABLED' in OID
  
  What is the best way to achieve the IOM? My first thought was to write a custom adapter, similar to the OID adapter change user out-of-the-box, which takes in charge the changing multiple attributes.
  
  Is there a better way?

  You can create two tasks that will modify two attributes to OID.

  On the task of the user to disable call task1, success of task1, Task2 (using the task to feature generate).

  You can make use of OOTB connector only.