I have some .txt Admin (running with WebLogic 8.1) files, using the following commands (for a batchupdate of wladmin): -CREATE an mbean... -SET - mbean... -INVOKE - mbean... -CREATE_POOL...
These Admin commands should be replaced by WLST (working with WebLogic 10.3) commands. I'm wrong if I think that the first three commands can be replaced by these WLST editing commands? [http://edocs.bea.com/wls/docs92/config_scripting/reference.html#wp1179175] create set invoke
How should I replace the last command (CREATE_POOL)?
Best regards József
Yes, you should be able to replace the first three with the commands you listed. With regard to the creation of a connection pool going, take a look at the following example: http://download.Oracle.com/docs/CD/E11035_01/WLS100/jdbc_admin/config.html#wp1068516
Original title: no mapping between account and the security of ID names was done.
I am trying to set up my Dragon NaturallySpeaking 10 program. My computer (Dell Studio 1550 on Win 7 64 bit) has been recently reset and during the reinstallation of the DNS and the subsequent fine adjustment, I came across a page that wanted my username and admin password.. I plugged in and it came up with the error message: "no mapping between account and the security of ID names has been done." There is one account on my computer and my admin. account. If something has been lost in resetting? How can I fix / security ID card? Thank you for your help.
Hi Hasky620,
I recommend you contact the support of Dragon NaturallySpeaking for assistance:
I use ucm11g, is there a way to map between ldap and ecm11g internal user profile user attributes? I tested with an attribute named homephone wls embeded LDAP, create the attribute homephone in ecm11g the user after login profile, I can't find the value in the ecm11g user profile.
Best regards
In earlier versions, there was LDAPProvider which was replaced by JpsUserProvider to 11g. This component allows you to do a bit in the interface, but there are a few more options which do not seem to be documented. For example, if you have a HomePhone field and enter 123456789 inside and then empty, by default, the JpsUserProvider component will not empty field the Complutense University of MADRID. You can change this by entering ClearMissingAttributes = true in the provider.hda file. Or if you want to use the credentials, you will need to change provider.hda with ProviderCredentialsMap = name_of_map (my source for the latter was the ECM blog at http://blogs.oracle.com/ecmarch/2011/03/).
For more information on JpsUserProvider, look in the Administrator's Guide:
When to add JPS provider: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10792/c02_settings007.htm#CSMSP496
Adding a JPS Provider: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10792/c02_settings007.htm#BEIIAHHI
Hello I installed Oracle Internet Directory and Oracle Access Manager. I am able to connect to Oracle Access Manager and Administration of Oracle identity using my default Admin ID - sleep. Now, when I am trying to add a new user, I get the error report that action is down and "waiting for Participant.
Also, when I add a new user via, DIO he did not reflected in OAM and OIA.
I don't know what is the error, as I am new to Oracle tools.
Also, I think that the mapping is fine, otherwise I wouldn't have been able to connect in MSO, using sleep.
You can help as soon as POSSIBLE.
Kind regards Niranjan
You can list all the details on your workflow of creating user you use?
You have a custom user objectclass? It is configured in OAM? When adding the user in OID which user OC are you using?
Can someone tell me what is the difference between user groups, we can define in Administration Siebel - SPR analysis tools and Siebel Analytics Web groups?
Also, what is the relationship between them? In my environment, I'm deep divergence between these groups.
I'm working on a project for a Government of a county of Florida. We have a problem with project accounting R12 data match with OBIEE 11g database. It is more of a field of marking problem than a problem of integrity of data - for example, 'Customer number' in the accounting of the project is clearly a different data set than 'Customer number' in BI. We know the same data exists in BI but we do not know what it is called and therefore how interrogate him for reporting purposes. Why data marking is so messed up, I can't say, but I was in charge of mapping 'Customer number' (and everything else) in project accounting to the equivalent of the BI field. Supposedly this mapping does not already exist (which seems impossible since someone set up the flow of data between the two parts of the system at some point!). I hope someone can recommend an approach that doesn't end up being heavy and manual. Thank you!
Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?
If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
I have noticed that my msfeedssync.exe were not working or updated so I went to the Task Scheduler to see what was going on and received the number above mapping between user names and security ID error I never use Task Scheduler, but I do not know its also used for RSS updates , I do all my own maintaince so I need only of GI RSS using a 3-year-old dimensions of dell with xp pro and its in tip top except for that shape it came only with a 80 GB hard drive and I've only used 20 concerts in 3 years that I use online for things important and backup storage I hope there is a solution for this because I installed ram to 4 GB and it has a 2.8 ghz Processor blazin fast and is in very good shape all help will be appreciated thanks
Hello syncere99,
1. What is the user account in the Task Scheduler are you for the work you are trying to use the Task Scheduler?
The error code indicates that the user account that was used to create the job no longer exists. This could be because the user account is deleted. I suggest that you remove and re-create a job and check if you have the same problem.
Thank you Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.
I have a laptop of Acer under Vista Home Premium Service Pack 1. I open advanced user accounts of & assistance, and I saw two names my old & news of the administrator. He used my name as the user name and my new name as the display name, so I deleted the old username & changed to match the full name (the new name). After the change has been made, I get an error message "no mapping between account names and security IDS was done 26EE0668-A00A-44D7-9371-BEB064-C98683. Now I can't access control panel to make changes to account. Help & Support in the start menu and Windows Explorer are no longer works. Tools on the toolbar doesn't work or the other. I can't yet run a virus scan. I did find something useful from my own research. Help!
Thank you Cheeszz P.S. I also started a McAfee Quick Clean to remove undesirable accumulation of the computer. He cleaned the keys to an orphan registry, internet cache, temporary files & lost file fragments. I don't know if he has also nothing to do with the error message.
Hello Cheeszz,
Thanks for posting your question on the Microsoft answers Forum.
Essentially, you get the "no mapping between account names and security IDS was done" is because you now have an orphaned user account. This occurred when you deleted your old username which was still in use by the system under the name of each user name has a unique SID.
I suggest that run you a system restore point, then you can go back to a previous point in time before you deleted the name of the user. Follow the article below for the establishment of a system restore procedure.
936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista http://support.Microsoft.com/kb/936212
You can also create a manual system restore point so that you can restore to that State in case of problems. Right-click on the computer icon in the desktop, then choose Properties In the left pane, click System Protection Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. Click the System Protection tab and then click on create. In the System Protection dialog box, type a description, and then click on create.
I'm running off Windows Vista and have a network buffalo drive 464 concert in order to back up my files. I get the error "no mapping between account names and security IDS was done" after I try to connect with a prompt asking me a username and password in the drive. I have not defined anything like that to give me this info before accessing my network drive. I can read, write, store in the drive of everything except to back up my files on the desktop. What I'm missing or doing wrong?
Hello
Please repost the link that is specific to the issues of backup below in the microsoft forum
I installed an external hard drive 1 TB USB to a desktop networked home. I use this unit to save the desktop system. I mapped it as a network drive for my wife's cell phone. She has full network drive read/write permissions. I'm trying to set up his laptop to backup over the network to the device using the backup utility provided with Windows Home Premium. When I try to choose the local backup device on the network drive does not appear as an option. When I try to configure the location using the networking option, I can select the device but then get the following error message... "No mapping between account names and security IDS was done."
Hello BrkAwa,
If the network drive does not appear when you try to backup, this means that the network drive is not mapped on your computer.
Follow these steps to map the drive on your computer.
1. click on the computer from your desktop or from the Start Menu shortcut. In the toolbar, you will find several buttons, including one called map network drive.
2. click on it and the map network drive window opens. First, you must assign a drive letter for the connection, and then type the drive or folder that you want to connect. The folder may be located on a computer, or remote server that you access, FTP site, or a shared folder on your computer.
3. If you want to connect to a remote computer only "-" followed by the name of the computer or IP address and then "------" track of the location of the folder that you want to connect. If you want to create a drive mapping to a folder on your own computer, type "\\127.0.0.1\" (this corresponds to the local host) or "\\computer_name\", then the path to that folder. Sometimes, when you create a drive mapping, you may need to use a special username and password that allows you to connect to it. In this case, click connect using a different user name .
4. type the user name and password and click OK. Now, you will return to the previous window. Click Finish and the drive mapping will be created.
5. If you go to the computer shortcut you will see again once a new disk with the letter that you have assigned is listed and you can access it at any time.
Map the drive, then check if you are able to use the drive for backup.
Thank you Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
Can you please let me know what could be the difference between archiving and the deactivation of the Qualitative research in data Admin Tool Kit.
Thank you
Rohini M
When you idle or archive anything it is no longer available for selection. The difference between inactive and the archives, it's inactive items still appear available for the fine items while searching of archive will not be.
Allows so that you have the following to say:
List A
-Article 1
-Article 2
List items
If you were to inactivate the point 1, end-users is more would see can be selected when you use the extended qualitative attribute. However when they are looking for specifications based on the extended attribute, they would still be able to select 1 point, whereas they could find objects that this value was used. If you archive Item 1, end users should display it no longer available for selection from anywhere - including research.
Lists
If you were to inactive or archive the whole list, you would see is no longer available for selection when the establishment of a qualitative research of extended attributes. I don't think that there's nowhere you can search for extended attributes by the list of research currently out of the box so that they would act similar. Is there a place to find attributes extended by the search list and then he would follow the same rules as above.
BlazeDS documentation shows how to map explicitly between ActionScript and Java objects. For example, this works very well for RPC services, for example
import flash.utils.IExternalizable;
import flash.utils.IDataInput;
import flash.utils.IDataOutput;
[Bindable]
[RemoteClass(alias="javaclass.User")]
public class User implements IExternalizable {
public var id : String;
public var secret : String;
public function User() {
}
public function readExternal(input : IDataInput) : void {
id = input.readObject() as String;
}
public function writeExternal(output : IDataOutput) : void {
output.writeObject(id);
}
}
and
import java.io.Externalizable;
import java.io.IOException;
import java.io.ObjectInput;
import java.io.ObjectOutput;
import java.util.HashSet;
import java.util.Iterator;
import java.util.Set;
public class User implements Externalizable {
protected String id;
protected String secret;
public String getId() {
return id;
}
public void setId(String id) {
this.id = id;
}
public String getSecret() {
return secret;
}
public void setSecret(String secret) {
this.secret = secret;
}
public void readExternal(ObjectInput in) throws IOException,
ClassNotFoundException {
id = (String) in.readObject();
}
public void writeExternal(ObjectOutput out) throws IOException {
out.writeObject(id);
}
}
If I called a RPC service that refers to a user, the secret is not sent on the wire. Is it also possible to do this for the e-mail service? In other words, if I create a custom message adapter and use the function below, also prevent secret to be sent?
MessageBroker messageBroker = MessageBroker.getMessageBroker(null);
AsyncMessage message = new AsyncMessage();
message.setDestination("MyMessagingService");
message.setClientId(UUIDUtils.createUUID());
message.setMessageId(UUIDUtils.createUUID());
User user = new User();
user.setId("id");
user.setSecret("secret");
message.setBody(user);
messageBroker.routeMessageToService(message, null);
Hi Martin. The way the serialization/deserialization AUTHORITY works for BlazeDS is the same regardless of service is used, then Yes, that code will work for messaging as well. On the server, the serialization/deserialization of messages coming to the endpoint. For an incoming message, for example, endpoint deserializes the message and passes it to the MessageBroker who decides what service/destination to deliver the message to.
That is a good question. Thank you for asking. A lot of people is used to make custom services (RemoteObject/RemotingService) RPC serialization/deserialization but I'm not sure that everyone realizes that they can do this for messaging as well.
Everything is entirely up to date, etc. on a Z87 PC chipset.
I can copy and paste. I can drag-and - drop comments to the host.
I can't drag-and - drop between host and guest! lol I just get that bar circle icon.
I'm totally stumped! I tried a myriad of common things...uninstalled/reinstalled VMWARE, then Tools, then even tried to create new guests. I do not have eccentric tweaks or customizations. It is a desktop PC that I use for a laboratory test and my business. I have no other problems in addition to this. Yet, on my other system, essentially a nearly identical configuration, I don't have this problem.
Any suggestions?
SOLUTION FOUND!
The problem boils down to a matter of RUN AS ADMIN. On the HOST problem, it has been set to RUN as administrator. I've not done this! He has just installed that way automatically. Once I stopped that and it ran normally, all was well again. Read below for more details.
I have two virtual HOST machine configurations almost identical - we'll we'll call HOST 1 and HOST 2. HOST 2 works perfectly without a problem. Drag and drop, to navigate to drives mapped to access NAS stored VMs, etc...
I began to compare what was similar vs. different between the two. On HOST 1 (problem child even as I could slide properly - drop on), I noticed that I could not navigate to my NAS location where some virtual machines are stored. In the left navigation panel, the mapped drives would appear as drive letters with question marks next to them as you can see in the image below.
I deleted the mapped drives then mapped them still fresh, did an other CLEAN uninstall VMWARE WS PRO 12. I combed the registry, records and checked for devices hidden in Device Manager. Clean as a whistle! I reinstalled 12 Workstation and returned the problem! I could yet drag-and - drop properly or navigate to mapped drives. Then I noticed the HOST 2 that he was not being RUN as administrator. Really? So, I removed this parameter and TA DA! Everything started to work properly. I don't know if it's a bug, or knowledge common to others but for me it was new. I don't know why, by default, when installing 1 HOST went down VMWARE to run as administrator, but it was.
Bottom line - do not run VMWARE as an administrator.
We have an installer of dyno with a chassis PXI-E running Veristand 2014 and 2014, inertia. In order to strengthen the capabilities and timing of the Veristand, I would use models of Labview to perform tasks is not possible by Veristand and inertia. An example of this is to determine the maximum amount of a large number of thermocouples. VeriStand has a comparison function, but it compares two values at once. This makes long and rigid emissions. LabVIEW, on the other hand, has a function which words one to get the maximum items in a table in one step. I need to use Labview to 'send' the thermocouples of 50 or more to the Labview model. In addition to the variables that must be communicated between Veristand and Labview, I also need to present Labview with the threshold and setting parameters. Forums and user manuaIs understand that you must use the connector pane in Labview Veristand System Explorer mapping to expose the inports and isolated villages. The problem is that the part of Labview connector is limited to 27 I/O. How to overcome this limitation?
BTW. I'm relatively new to Labview and Versitand.
Thank you.
Richard
You can work around this limitation by putting your orders and clusters indicators. Then set the cluster to be required or recommended to indicate whether contained controls are entered or parameters, just normal.
I've demoted Biz from Vista to XP Pro. Everything works great, EXCEPT...the DVD/RW works well as a cd / dvd drive (writing not tested), but it will recognize all the data on the disc when an HD DVD is inserted, so not HD-DVD movies.
I have Windows Vista Home Edition and I don't know when, but in some sort my printer spooler service has been removed, whenever I try to install my printer it gives an error message that there is no printer spooler service, please help I did not one
I am going through my C drive, looking to free up space. I have uninstalled some of my Steam games in the process, as well as emptied the old restorations system and other items. When I check my hard disk, it is said that there are 57 GB used outside
Hello I have a soft BBOS/Java (Contacts to Csv), which has a very good comments, I continue to receive positive feedback from users. I added the version for BB10, made in webworks. I tested it in the Simulator and on my DevAlpha, I have not found any
