Correct your integration broken with headphones!

Similar Questions

• IDT Audio Codec time Sound speakers but not with headphones on ENVY DV7 series laptop

  I bought my laptop not more than two months ago. Its perfectly played through my helmet literally the day before yesterday.

  Only two changes have occurred since then, first of all I accidentally plugged my headphones into the external microphone jack, then I updated the 'Music' for Windows 8 PC application.

  After my sound stopped working. I restored my PC to a restore point dated before its no longer works in my helmet, however resonates once again that in my speakers (when my headphones are disconnected). When I plug my headphones, sound no longer plays in my speakers but no sound from my headphones either.

  How can I get audio to play through my headphones?

  Product name and number: Envy of HP dv7 Notebook PC C2h74UAR #ABA

  Operating system: 64-bit Windows 8

  Error message: None

  Changes: 1) update "music" app for Windows 8

  (2) accidentally plugged in headphones and external microphone jack

  Hello

  Try the following.

  First of all, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 8

  When reinstalling, restart the laptop.

  When windows has reloaded, download IDT Audio Installer on the link below and save it in your downloads folder.

  IDT Audio Installer - Windows 8.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio with headphones.

  Kind regards

  DP - K

• Premiere Pro 2015.1 broken with node + other features

  Two of these features are broken on OSX 10.10.x and Windows 7 for Premiere Pro 2015.1

  Seems the 2015.1 version broke some features that we are quite dependent on development and once you lose these features, it makes you realize how dependent you were on them!

  It seems that Adobe broken of (probably removed, it does not look like it exist anymore) fs.watch node functionality, which I use a generation system generate permanently for extensions. If I make changes to files, it can look at the files and reload the application + simultaneously to the debugger. This is extreme for us time because it takes out the process of reloading stuff while you make changes.

  Another thing that Adobe extensions seem to break is debugger for Chrome (Chrome is updated). When running full screen (and only when you are debugging an extension of Adobe), if you fill out a page, scrolling is broken. I have attached a screenshot below and as you can see, I fill the window, but scrolling is disabled. The use of the debugger for something other than an extension of Adobe works very well.

  

  
  
  

  It was two things that worked in 2014 and 2015.0, but no longer work in 2015.1

  After doing research a bit more, it seems that others have this problem as well: to a newer version of WebKit/chromium · Number #28 · Adobe-CEP/CEP-Resources · GitHub

  See the last comment he of Jolg42. I have, however, tried to do that, but to no avail.

  And another thing that seems to be broken is running app.project.path on Windows (not OS x) returns a nasty filepath. I don't remember to do it in other versions, no more, but don't want to say specifically. This is the way it returns what is bad:
  It returns this in the two Extendscript Toolkit and the code of the normal extension.

  
  

  Result: \\?\S:\Premiere\projects\devproject\test\assets\premiere\Templating\Untitled_1.prproj
  
  I put a temporary solution in the extension to deprive these characters, but they shouldn't be there in the first place.
  
  If someone need it, here is the fix:

  
  

      getProjectPath : function() {
          // On Windows, Adobe is returning this: \\?\S:\
          projectPath = app.project.path
          projectPath = projectPath.replace("\\\\?\\", "")
          // Fixing slashes to point forward
          projectPath = projectPath.replace(/\\/g, '/')
          return projectPath
      },
  
  
  
  
  

  
  
  
  Node problems seem to be part of a bigger problem (perhaps the implementation of extensions in Adobe, I did have the time to test in other Adobe applications), so I don't know if nocero or Hallgrímur René might be able to weigh on them.

  
  

  Thank you for taking the time to read!
  
  Update 1: Panel HTML tips #19: CC2015.1 (CEP6.1) patches of Node.js. Photoshop, etc
  Do not have everything still works and Bruce, in that thread, you mention that developers of the pre-release program have been notified beforehand - which can be great and all, but that's not really help those of us who are not (and do not have time to be in) pre-release group. Is it possible to iterate for the people who manage the changes how relevant is that information like this have an official release? At this point, corrections are PURELY word of mouth, and it really kills cycles dev.

  
  
  

  So, it is updated: your way to edit the CSS debugger is not persistent, while I was still looking for something else.

  Someone came up with a good method in this thread, I presented to the Adobe Github: Chrome debugger scrolling is broken with CC 2015.1 update · Number #35 · Adobe-CEP/CEP-Resources · GitHub
  And it IS persistent, which means that you only need to do once by extension.

• Record with headphones connected screen

  OK guys, I REALLY need some help here! I sought an answer to this question for days without success. First of all, let me explain what I'm trying to do. I do (for youtube) videos of me children's games online. I have been using quick time player, which works very well. My problem is that I need one of the two (or better yet, BOTH!) solutions to the following problem. My problem is, I have a 2 years old, who loves to talk while I'm doing these videos of the screen. Is there a way to record the audio of the game, but block out all the other noise?

  2nd question: I would like to be able to make videos while everyone in the House is asleep. Is there a way to record and play audio screen with headphones plugged? Or any other way where the sound will be recorded but not read aloud. I tried with quick time player and headphones connected, when I play the video there is no sound. Help, please! Eternally grateful to anyone who can answer one or two of these issues. Like seriously, I would buy you doughnuts if I could!

  I use a MacBook pro. I would also like to know how to do the above things on my iPhone too!

  When you save your gameplay with Quicktime Player, by default, it records the sound from your microphone.

  Your microphone is picking up all the sounds around you - including the sound produced by your game and the noise of your 2 years.

  There are a few things you can do with audio on your mac that can help in achieving what you want.

  I just played a little bit of film QT listening on my helmet and captured audio in a new audio recording, so it should work!

  Another approach would be to use SoundFlower (which is free). With you install new get audio input and output that appear in system-> sound preferences options. Here is part of my entry in system preferences options:

  

  SoundFlower allows you to connect the audio output of a program to the audio input of another.

  So if your audio output is Soundflower (2ch) and your Soundflower (2ch) audio input, you can save. But... you will not hear anything!

  Comes a little-known program that lives in/Applications/Utilities: setting up Audio and MIDI.

  With it, you create two "aggregates devices" - a Soundflower device and the built-in output simultaneously and also for the entrance to exit.

  Choose the options for your output and audio input and you can play your game with a helmet and it will record.

  So the night registration problem is solved.

  It shouldn't be too hard to find a way to solve the problem number one in the same direction (Tip: simply choose another option of ENTRY).

  

  There are also some paid apps whose purpose is to intercept the sound of your mac and save Digital - Audio Hijack and Wiretap Studio are two that I remember.

• Equium P300: no sound from speakers but work with headphones

  The speakers on my P300 Equium seem to have stopped working?
  I checked the card its an all and them seem to no errors.

  Sound bar at the bottom right to move as it should when I play music, but it just doesn't come out of the speakers.
  However, it does work with headphones.

  Any ideas on how to solve the problem?

  Hello

  Hmm. You can hear the sound using headphones but you can't hear speakers that well it looks really a speaker problem, but it s really strange that both speakers are dead at the same time

  In your case I would remove the sound card driver and would update with that of the European driver Toshiba page.
  Check what's happening after the update

• Audio problem NB100 - pregnant no sounds, with headphones, it's ok

  Hello

  need help, please.

  I have a brand new Toshiba nb100-10y, but have no sound - without headphones. To say my speakers no sound.
  OS: XP Pro SP3, Device Manager Winndows is ok, do not have any yellow mark exclamation. And as I said, with headphones, it's ok.
  I use the factory drivers and their default settings with the bios 1.90.

  Someone has an idea? (Or I need to find any place of service...)

  THX,
  AoL

  Hello

  If you can use the headset then it would mean that the audio driver is working correctly.
  As I m wrong not the NB100 does support the Realtek sound card.
  I think you should have got a Realtek HD audio Manager in the control panel.
  Check the option in the Realtek HD audio Manager and make sure that all controls are set at the top level.
  Input/output Audio, you can find the option and could test the speaker output.

  PS: you can use the new Realtek audio driver directly from Realtek page.

• Smart connect works only with headphones

  Smart connect app stopped working with headphones, tried to dump the data and also restored the phone to factory settings but still nothing with any pair of headphones, I installed the app soundabout and helmet all work with this, then ask yourself if it's a software issue rather that the headphone jack is the problem, any advice please?

  I read a post that is almost identical to this one, please contact your local Xperia of care that it might be a hardware problem

  http://support.sonymobile.com/global-en/contactus/

• Only able to hear the sound with headphones

  I am only able to hear the audio with headphones.

  Hello

  for some reason, I am only able to hear the sound of my laptop through my headphones. When I take the headphones on the speakers does not work! Help, please. This sux

  Go to control panel-> hardware and sound-> sound

  On the reading tab, turn on and set your speakers to laptop as the default device

  hope this helps

• Audio works with headphones, but not the speakers

  Hello, I have a DELL XPS17.  The sound works fine with headphones, but no sound when the headphones are disconnected.

  Note that I had the opposite problem (its good speaker, but no helmet) and then updated the driver.  Once the new driver has been installed, the problem was reversed.  Very strange: Pei

  Last driver installed is Audio_RLTK_W7_A05_Setup-J3VMR_ZPE

  Thanks for your help!

  Hello. You can test your speakers by running test audio fast ePSA or PSA tests.

  You can test the audio driver by opting for the native Windows audio driver. If you get the same symptoms with the native driver, then you can exclude a bug in the driver from Realtek. This Realtek driver has been around for awhile now and has no bugs that I know.

  • 1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  • 2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  • 3 Select this option to "Update driver software".
  • 4. click on "Browse my computer for driver software".
  • 5. click on "Let Me pick from a list of drivers on my computer".
  • 6. put the "Show compatible hardware" check box if not already checked.
  • 7. in the list of devices, click on 'High Definition Audio"(native driver).
  • 8. click on "next".
  • 9. in the update driver warning box, click 'Yes' (the driver).
  • 10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  • [To return to the Realtek driver, do it again but reverse steps 2-7 names].

  If the speakers and the driver to pass the tests, you might have failed to sense pin into the headphones Jack, explained in the FAQ of Jack for headphones.

• Is the path of voice broken with the 10.9.9.339 version of the OS?

  Hello!

  Can anyone confirm if the voice path and the 'voice' PCM device are broken in the current SDK / OS releases?

  I can not all sounds in the earpiece and microphone when running the new operating system.

  I tested it in my own application and the AudioLoopBackSample.

  https://github.com/BlackBerry/core-native-community-samples/tree/master/AudioLoopBackSample

  Please check this fix for the last correct way to work with the audio device:

  http://trac.pjsip.org/repos/changeset?RepoName=&old=4316%40pjproject%2Ftrunk&new=4316%40pjproject%2f...

  You will need to call:

  If ((pb_result = snd_pcm_plugin_set_disable (pcm_handle, PLUGIN_DISABLE_MMAP))<>

  After the device audio openning.

• Can I use your Apple TV with MacBook Air

  I use a MacBook Air, 13-inch, mid 2013, OS X El Capitan 10.11.6. I am interested in Apple TV. With this product I was able to connect my Epson EB - S18 projector to my Mac in order to project movies that I bought on iTunes on my wall of the apartment? Would be there is always a problem to play these movies 'protected' outside the computer itself? Must they be downloaded in SD and not HD? Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port? Can I use a patch to connect the VGA cable to the port on the computer to the projector? Please notify.

  Thank you very much.

  Can I use your Apple TV with MacBook Air

  Yes! AirPlay with an AppleTV is the easiest to use and less complicated solution.

  SD / HD makes no difference.

  You will only be able to enjoy the full quality of an HD movie with a better projector however. This model projector is not really intended for presentation of home theater. It will work well. As you can imagine that there is no upper limit on the amount, you can overlook these things, but $2000 is going to buy a nice home theater projector these days. A few years ago, you would need to spend $ 50,000 or more.

  Would be there is always a problem to play these movies 'protected' outside the computer itself?

  No, not if you bought (or leased) from iTunes. They have to play on any device compatible iTunes. You can even use AirPlay to distribute it to your AppleTV from an iPhone.

  Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port?

  Yes.

  Can I use a patch to connect the VGA cable to the port on the computer to the projector?

  Not without a converter. Avoid using the VGA if possible. It's a terribly outdated and generally horrible alternative to any digital standard. Since your MBA has a port Thunderbolt, and if your projector has a HDMI input, buy a cheap (± $10) Thunderbolt to HDMI adapter cable. But AirPlay is preferable to a wired connection.

• A website no longer works correctly. O ' k with IE. Recent updates FF18, Flash 11.5.502.146 &amp; Win 7 (64-bit)

  www.Dallastown.NET website of the school is no longer loading the images/info correctly. Works well with IE.

  To maneuver around some by right click and open in a new tab. "Select a school" menu drop-down is a specific problem. Times many clicks of the mouse will open the page correctly. Always run into problems without response with a click or a lack of information.

  A number of updates have taken place recently, not sure where there is problem. I currently have Java disabled, but tried with it activated and no help. Uninstalled and reinstalled FireFox (18), no help. Thinking maybe a problem with FF 18 and Adobe Flash, but don't know what to do.

  I appreciate any help you can offer.

  Problem has been solved, the website now works properly. Suspect an update of FF 18.0.0 to 18.0.1 or something on the site solved the problem

• You can search for your personal library with Siri on the Apple TV and if so, how?

  You can search for your personal library with Siri on the Apple TV and if so, how?

  No, and it's a real shame...

• Way to hear microphone with headphones?

  I want to be able to hear me talk through my headphones. Essentially, I want to take the microphone input and turn it into headphone output. (I'm hearing so I tend to speak more loudly that I need to) Is it achievable through Skype settings? If so, how could I do it? Thanks in advance.

  It's a Windows setting, not a parameter of Skype. I googled for you with "Hear micro speakers" and here is a link from the first page of results:

  http://SmallBusiness.Chron.com/hear-microphone-through-computer-speakers-56535.html

  It also works with headphones.

  --
  Serious chat user, seriously annoyed by the cat version 7 IU.

• HP integrated module with Bluetooth for Microsoft Windows 7 wireless technology

  Hello

  Recently installed windows 7 in my system. My dv6330ea model No. - HP Pavilion Notebook PC. Check out the link http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=3411896&

  Here are the details mentioned in the Device Manager

  Bluetooth radios

  HP Integrated Bluetooth module

  USB\VID_03F0 & PID_171D & REV_0100
  USB\VID_03F0 & PID_171D

  Microsoft Bluetooth enumerator

  BTH\MS_BTHBRB

  -------------------------------------------------------------------

  can anyone provide the latest drivers from Hp that is to say spXXXX.exe that will help my system? I'm confused little

  sp44774.exe  

  Version:7 (19 October 2009)

   

  Supported devices and features
  VID_03F0 & PID_171D = 'Module integrated HP with Bluetooth wireless technology'

  VID_03F0 & PID_2A1D = 'Module integrated HP with Bluetooth 2.1 wireless technology'

  VID_03F0 & PID_231D = 'Module integrated HP with Bluetooth 2.1 wireless technology'

   

  Model of support material in

  Computer laptop HP Pavilion dv4 series
  HP Pavilion dv6 Notebook PC Series
  HP Pavilion dv7 Notebook PC Series, etc.

  -------------------------------------------------------------------------------------------------

  sp47022.exe   

  Version:7 (22 January 2010)

  Model of support material in

  HP Pavilion dv3 Notebook PC Series
  HP Pavilion dv5 Notebook PC Series
  HP Pavilion dv6 Notebook PC Series
  HP Pavilion dv7 Notebook PC Series
  HP ProBook 4525 s Notebook PC
  HP ProBook 5220 m notebook PC, etc.

  Supported devices and features
  USB\VID_03F0 & PID_231D = 'Module integrated HP with Bluetooth wireless technology'

  USB\VID_03F0 & PID_171D = 'Module integrated HP with Bluetooth 2.1 wireless technology' USB\VID_03F0 & PID_2A1D = 'Module integrated HP with Bluetooth 2.1 wireless technology'

  --------------------------------------------------------------------------------------

  Which one to install or provide me with the last being?

  Or

  Install the version of vista to windows 7, which came with pre-installed i.e sp34275.exesupport download and driver HP Pavilion notebook dv6330dea

  Hello:

  I don't think that the Vista driver works the bluetooth under W7.

  It is the latest version of the HP bluetooth software driver W7:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-81348-2&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0001