Record with headphones connected screen

Similar Questions

• Trying to copy a video on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Trying to copy a video to my iPad Pro on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Which sector adapter are you using?  The digital adapter AV output is digital, which is not compatible with analog VCR.

  iOS: on adapters AV digital Apple

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• Computer stops with a blue screen with error fatal when the iPhone is connected

  I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

  First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

  My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

  I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

  Thank you.

  Hi 1980ckc,

  1. have you tried to connect the iPhone to a different USB port?

  You can check out the apple support link and check if it hleps:

  iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

  http://support.Apple.com/kb/TS1502

  Also check out the apple discussion link:

  http://discussions.Apple.com/message.jspa?MessageID=10339681

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need help for Windows Vista black screen during the connection, even with the login screen removed

  Hey, I have a problem in Windows Vista:

  I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .
  
  PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

  Hello

  Follow the steps below:

   

  Method 1: Do the Startup Repair to fix the problem.

  See the following article for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Let us know if that helps.

• Smart connect works only with headphones

  Smart connect app stopped working with headphones, tried to dump the data and also restored the phone to factory settings but still nothing with any pair of headphones, I installed the app soundabout and helmet all work with this, then ask yourself if it's a software issue rather that the headphone jack is the problem, any advice please?

  I read a post that is almost identical to this one, please contact your local Xperia of care that it might be a hardware problem

  http://support.sonymobile.com/global-en/contactus/

• Computer is stuck on "Microsoft Corporation" logo with the on-screen scroll bar, a green.

  Hello

  I had difficulties to get my computer past the "Microsoft Corporation" logo with the on-screen scroll bar, a green one.

  I searched the forum and found others who have had this problem. I tried some of their proposals, but eventually Windows does not run on my PC.

  It seemed a moment have solved the problem, but my AVG security had been removed. When I arrived the AVG security working properly my computer starts a few times more, but now I'm right back where I started.

  Is it possible for me to turn this thing on, but not in Mode 'Safe '? I am sick and tired of trying to connect, or try to understand this problem.

  I wish I could just take my computer to where I bought it and get my money back. Unfortunately, the warranty period is exhausted on my PC, so I'm stuck with it.

  I use Windows Vista Home Premium 64 bit, I don't know if that makes a difference?

  Any suggestion would be appreciated.

  fq283

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• "Recording with wavepad sound recorder with headset microphone does not.

  Record music on youtube with sound on a microphone

  I like rap I used to have windows xp, but my computer doesn't work and now I have a new one with vista. I use the same registration program that I used, but now it records only the sound into the microphone. My goal is to be able to record sound on the headphones with the words that I say into the microphone. I get my beats on youtube and I use sound recorder of wavepad.

  Hello coinstar.

  1 do you mean that you are not capable of recording using the microphone that is built with the helmet?

  2. have you checked if the microphone with the headphones work well?

  Make sure you setup recording properly on your computer. Run the configuration of recording when you connect the headset. Here is a tutorial that I found on the Wavepad website that shows how to set the microphone:

  http://www.NCH.com.au/KB/10010.html

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Also connect the headphones with microphone and check if it works normally.

  Here is an article that will give you information on troubleshooting registration issues in Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Locate computers I recorded with HP?

  I'm trying to find out which computers I recorded with HP. I don't have a product # or # of series on the a because it brought on the back and it may be one of those involved in a recall. I have three others who have bought the same month and al the information but I wanted to get the nfo on the last of them.

  Is anyway to do this on the site of HP?

  Thank you

  [Personal information]

  I've never seen major manufacturers like HP, Dell etc, do a search reversed for this, I think it would be a privacy issue if they did.

  On most of the PC from HP, you can look in the bios, set up screens to find the model and serial number.

  Some you fress F1 at the beginning of power on when you see the HP logo. Others, you use F10 to enter the BIOS.

• How to activate the icon of speaker on the CONNECTED screen selection?

  How to activate the icon of speaker on the CONNECTED screen selection?

  Hi leross,.

  I don't know what app you ask on the sound settings for your Apple Watch.  But, in general, you choose your Apple Watch as a source for your music.  Once you pair your Apple Watch with a bluetooth headset, you will be able to adjust the volume.

  Listen to music on your Apple Watch

  Play music from your Apple Watch

  You can also enjoy the music on your Apple Watch without your iPhone when you pair with a Bluetooth headset. Open the music application, scroll up, then on your Apple Watch to choose it as a source. Then scroll down and tap one of these options:

  • Playback in progress. Play / pause what is currently playing on your Apple Watch.
  • My music. After a sync a playlist to your Apple Watch, you can browse your music by Albums, artists and songs.
  • Playlists. Follow the steps below to sync a playlist to your Apple Watch.

  Take care

• Had prolems with internet connection. Engine 0 x 80300113 C:\windows\diagnostic\systerm\networking

  Hallo,

  I bought a new twe weeks computer.  Had prolems with internet connection.  KPN were fist to send someone because everything worked modum, draadloosnetwerk (on the screen), but nothing connected. The next day, I opened my computer and the problem was solved.  Now - since yesterday, I have once again no internet connection and it's the same problem I think.  I'm not a genius, but I'm trying to find the problem. Everything I could find so far is the following, but just don't know how to solve it-cAN U PSE HELP ME?

  The problem is as follows:

  Problem of the wizard.

  NETWERK/diagnosis /.

  C:\Windows\diagnostic\ststem\networking

  Code: 0 x 80300113

  Source: engine

  user: user-PC\user

  context: limited

  Hello

  
  1. what operating system is installed on the computer?
  2. do you get an error message?
  3. How do you try to connect to the Internet?
  4. what happens when you try to connect to the Internet?
  
  Steps of methods mentioned below if you have the Windows 7 operating system.
  
  Method 1: this error occurs generally when the date and time of the system does not coincide with the actual date and time. Check if your system clock is set according to your time zone.
   http://Windows.Microsoft.com/en-us/Windows7/set-the-clock
   
  Method 2: Perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet
   
   
  Hope this information helps.

• Computer connection portable tv with HDMI connection.

  I have connected my new laptop to my new 22 '' HDTV with a new HDMI cable in order to be able to use the TV as a monitor for my laptop. I went in my entry on the TV and changed my HDMI input.  Got a great picture on my TV from my office computers but the image was too big for the TV screen which cut about half an inch of the image on all four sides.  I went in my display settings on my laptop and changed my screen resolution for each of the seven different sizes listed, but they were still too large or too small.  Also, I get no sound with this connection. I thought that all the cables HDMI carries audio and video.  What did I miss?  What have I done wrong? Would appreciate any help on this problem

  Thank you

  Hello geno728,
  This thread has been created in the Microsoft Feedback forum. the moderation of Microsoft team has moved this thread to the hardware and drivers Forum.

• VIXIA HF R600 record with no healthy option?

  I'm sure that I'm missing something simple, but can someone please help me with how to save with no noise on the Vixia HF R600?

  I can see sound options for: modes Standard, music, speech, & forest birds and Noise Suppression. (= Noise suppression "reduces the noise of the wind and cars. Ideal for recording in a car or the crowd. ("It does not turn off the noise.)

  During video playback I can see where to adjust the volume of the headphones/AV.

  However, I still find an option to turn off the sound when recording.

  Am I missing something? Or is my only option to take the sound with some editing program afterwards?

  Thank you in advance!

  Thanks for the reply. I can go that route. I've seen a few comments on some pickups that say what you said.

  It seems strange that a modern camcorder would not be the mere possibility of recording with no sound so. It seems such an obvious option to understand.

  Well. Thanks again!

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.