Corresponding to several access points in Adobe Captivate 6

Similar Questions

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Linking multiple images to a hotspot of reversal.  Several access points on a slide.

  Does anyone know if there's a widget or work around or something that will allow me to do this? My job depends on it

  Thank you!

  As long as you are not concerned about the exit to HTML5, the widget event handler is probably your best choice:

  http://www.Infosemantics.com.au/Adobe-Captivate-widgets/event-handler-interactive

  I think that what you probably are trying to do is have multiple images appear or disappear when a user will fly over a given spot. Is this correct?  If Yes, then you don't really need is a simple widget to event handler attached to a box of highlight to 0% Alpha (make it act as a transparent hotspot).  You can run a single Advanced Action to DISPLAY the images through the event on success set to Roll Over, and a different Action of Advanced value Roll-Out even on the side of the failure of the widget to HIDE even from images.  Set widget preferences to reset the criteria of success relative to the Action failure so that you can do the mouseover and mouseout/mouseouthandler() several times.

  You can even stack several gadgets on a single object, each widget can be configured to listen to a different mouse event and do something different depending on what the user is doing.

• Portege 4000: Can't find Wlan access points

  Device will display a Manager Toshiba Mini PCI card wireless current LAN and I have the latest driver for it.

  I have a new installation of XP SP2.

  I am able to search for wireless networks, but the search always comes back with nothing even when there are several access points nearby... any ideas?

  Thank you

  Michael

  really want to go out and buy a USB wifi dongle... I got the portege of ebay cuz it has been built in :(

  Hello

  Please note that your notebook is WLAN standard card B and if your router is set to 54G only it's possible this laptop is not able to see WLAN network. I recommend you to check the settings of the WLAN router.

• How can I control the number of clients connecting to one or more access points?

  Hi guys,.

  I am using several access points LWAPP/CAPWAP (1010, 1131, 1142) connected to the 4400 series wlan controllers (OS Version 4.2 and 7.0).

  Regarding the client connection to access points, I have several questions:

  1. extent to which clients can connect to an access point (maximum possible vs recommended)?

  2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.

  3 How can I balance the number of customers between two adjacent ap, who use the same SSID?

  Best regards

  Thorsten

  Hello

  1. extent to which clients can connect to an access point (maximum possible vs recommended)?

  YEARS-

  Here is the link for possible Maximum...

  http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/
  
  c70ccfg.html#wp1085099
  
  Recommended , Not more than 20 clients per AP.

  2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.

  YEARS - here's the software bug that we had raised with the development team of thre...

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj94508

  Symptom:
  
  There should be a way to limit the number of wireless clients that can associate to a lightweight AP.
  Conditions:
  Workaround:
  
  

  3 How can I balance the number of customers between two adjacent ap, who use the same SSID?

  YEARS - you can configure the feature aggressive load balancing across the WLC, it can help...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• I am trying to download a trial version of adobe captivate, I downloaded net session akamai interface, but it does not open when I click on it. I tried to download the file directly, and there is no answer. I unlocked the ads. I use an access point

  I am trying to download a trial version of adobe captivate, I downloaded net session akamai interface, but it does not open when I click on it. I tried to download the file directly, and there is no answer. I unlocked the ads. I use a mac apple OS10.6.8 and the browser chrome. can anyone help please?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• Download Adobe Captivate trial - The Akamai Download Manager has encountered a fatal error: access denied.

  I tried to download the Adobe Captivate trial several times now.

  Finally, he worked at a given time, and I was downloading file 1 of 2. At half way I had to stop the download, with the intention to resume the next day. Now when I try to take it back, I kept getting the message "Akamai Download Manager has encountered a fatal error: access denied."

  http://www.Adobe.com/cfusion/tdrc/bundle.cfm?product=Captivate%5FEN%5FUS & loc = en_us & prdLabe l = Adobe Captivate 8.0 & resumeDLM = true & URL = http://trials3.adobe.com/AdobeProducts/CPTV/8_0_1/win64/Captivate _8_x64_LS21.7z; http://trials3.Adobe.com/AdobeProducts/CPTV/8_0_1/Win64/Captivate_8_x64_LS2 1.exe & language = en & index = 1 & name=Adobe%20Captivate%208.0%20English%20Windows64-bit & prompt = model pr & prdLabel = Adobe Captivate 8.0 optvalue = & upsell = 

  Even when I tried to register again on the Adobe Web site to restart a new download, I got the same message.

  Could someone please?

  Thank you

  Ivy

  Try to jump the ADM and download directly via the link below.  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Adobe Captivate 8 direct download links: Free Trials with no Akamai | ProDesignTools

• Is it possible the default value to a specific Access Point, where several AP?

  Hi, first of all, I want to thank you for taking the time to read my post. To give you a brief description of my system, I'm running a T60 with windows XP operating system.  I have the latest Dial-up connections, version 5.02 installed.   I installed the most recent drivers wired / wireless, wireless, I use: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62875for wired, I use: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67829

  Wireless security: WPA

  Problem: Here to work, we have multiple AP in the building (Cisco equipment) at least 5, there is an access point located right above me, when I try to configure a new profile in the dial-up connections, and specify this AP over my head right, he will accept... but when I try to connect, it connects to a different access point not the one specified in the profile.  The result is a signal very very low.  Workaround for this currently is looking for all the AP VIA the button "Find Wifi" in dial-up connections and specify that it connects to a right above my head, the result is almost a 100% signal strength.  Is there anyway that I can get this access point which is located just above me to stick on the default profile?  I tried to create the profile several times but it always default to an AP really far.  Thanks again, E.

  Ericsobig, welcome to the forum,

  I don't know if you've tried? If you click on the configuration of the profile advanced settings, you can enter the MAC address of the access point preferred, with alternatives.

  It may also be that the AP is too narrow, and because the response interval is too short, it loses the connection, I had this experience.

• Need help with Adobe Captivate 5.5, this version is the best that I have access to the

  Recently, we loaded Adobe Captivate 5.5 on my desktop machine, we have enterprise systems I can not get the most recent 9.  Can anyone provide any support on 5.5, specifically related to the text-to-speech feature?

  Ask your questions in this forum. Maybe someone will jump in.

• Adobe Captivate file size

  I have a two part question. I work with Adobe Captivate for the first time, so I am of course a lot of rookie, errors, and now I'm stuck.

  I have a project that is 122 229 KB, and when publishing to LMS, is 63 900 KB. I made sure all the graphics are as small as possible, but it still takes a long time to load when you access through the LMS. My first question is, what is the size of ideal file for the publication of LMS? If necessary, I may have to divide my presentation in several modules so that they are more easily, but I'm curious to know if there is an easier way to address the issue before it split.

  My second part of the question: is there a way to tell Captivate to begin play the webinar when it loads? When I tested, it took about 2 minutes to load the file that in the world of technology online, it's an eternity. I hope there's a way to tell him to start playing the video during the rest of the presentation the loading in the background.

  Thank you in advance for your help!

  Kristen

  Hello Kristen,

  Welcome to the forums. For your last question: you can reduce the Preloader % in Preferences, project, start & end. Its default value is 100%, which means that the entire project is loaded before playing. Also: avoid having a heavy slide first, no audio action, not complicated, etc..

  There is no ideal real file size, because it depends on many factors. Keep the resolution as low as possible, I mean the size in pixels. You talk about graphics: what type of graphics do you use. If you're on the CP9, he agrees to SVG which, in most cases, have smaller file than bitmap images. But it's not only the graphics that define the size of the file: as the number of slides, images, audio and video clips.

• How to download longer videos at Adobe Captivate premium?

  I have difficulties, downloading videos from Adobe first which are longer than about 5 MB / minute. I need to download videos about 5 minutes. Note: The videos of all the download easily on YouTube.

  On a typical film of 13MB downloaded on 38% 5MB then pedaled charger back to 9% and again an increase of 27%, before falling back.  This has happened several times until finally an error flashed for a few seconds.  I tried several times with several different videos, all with the same result.

  I also tried to put the videos in Adobe Captivate and transferring this way, but this also fails.

  Now I changed the Windows Firewall to allow full access Captivate and it still does not work.

• My Airport Time Capsule can act as a WIRELESS access point

  Hello.

  I brought a Time Capsule with my Mac Pro. It worked well since yesterday.

  I have set up the time Capsule as a WIFI, bypass at my local network access point. There is a router (cable) works at home.

  It's my Mac Pro AirPort Utility and my iPhone, my Time Capsule is displayed with an exclamation point saying "device not found". I can't connect to the disk on this subject by afp share, or smb. Time Machine function is gone too. He failed trying to connect to the share drive from another computer connected to the time Capsule by cable network.

  But at the same time, WiFi works well.

  I tried to recycle energy. Sharing disk will be available. But if I start the Time Machine backup, it will not be a few seconds.

  Any idea?

  Thank you.

  There are several posts here related the issue.

  Luckily, you have set up your new Time Capsule for Back to My Mac (BTMM)?

  If so, the 'temporary' solution is to delete/disable the option of the CCMM, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

  If you have not enabled CCMM, we have other options for you to try.

• Stor.E access point stops working after a few seconds

  Bought a Stor.E wireless adapter and followed the instructions but after turn on the unit by connecting to USB power usage provides cables, access point WIFI disconnects after 4 or around seconds.
  1. I connect to usb power
  2. the indicator flashes in green and stays on
  3. wireless light turns green and stay on, turns off after a few seconds

  Managed to connect using the mobile app several times, while its sequel, but given that the WIFI point disconnects, can't use it.

  Any thoughts?

  1. I connect to usb power

  Stor.e wireless adapter must be connected to the power supply and the other end to the external HARD drive.

  

  Then, you can use the application to access the wireless content.

• Time Capsule bridge and access point?

  Hello

  I have a question about the network wireless of my TC. Our provider has installed a new router. These router can not work as bridge, telephone and TV are also connected to this router. Because 2 wifi networks do not work, I wonder what is the best set-up for the network? The Capsule is connected to the router by ethernet. It is configured as a gateway. Before I used the TC to connect to internet. Now, I have disabled the wi - fi function and use the ISP connection. It looks good, only backups are a little slow now.

  -What is the best configuration for the TC in an existing network? So that I can put it off the wireless of the TC or the ISP router: can I use the TC-wifi (create a new network) or wifi existing ISP router to connect with wireless devices?

  -Do I lose speed when I'm with 2 devices on my network: TC as the ISP as a router and Access Point.

  (I always thought that 1 unit for router and access point is the best configuration.)

  -Are faster backup copies using the TC wireless or it does not matter when I backup on the wireless ISP?

  Some maybe stupid questions, but thanks in advance. Greetings.

  Because 2 wifi networks do not work

  Many people think that this is the case... but this isn't so.

  You can use several wireless networks... all attached to the same router. There is enough bandwidth available in the channels wireless for the operation of 3 different wireless networks nearby each other... and using 5 GHz adds much more.

  The Capsule is connected to the router by ethernet. It is configured as a gateway. Before I used the TC to connect to internet. Now, I have disabled the wi - fi function and use the ISP connection. It looks good, only backups are a little slow now.

  The configuration of TC in bridge is correct.

  Do not turn off the TC wireless... Provide a different name for the ISP wireless router and connect your computer... then you can get internet and make backups on the TC without overloading the ISP router wireless.

  -What is the best configuration for the TC in an existing network? If I disable the wireless of the TC or the ISP router:

  Turn on Wi - Fi in both.

  A physical configuration, it is recommended to have say separation of 1 M (3 feet) between the ISP router and the TC to a min. But it would be even better to have the TC at near the Mac who performs backups TM and related to the ISP router with ethernet.

• Can I use my Satellite P10 as Access Point?

  Satellite P10 wireless access point

  Please can someone help?
  I have a laptop wireless by Satellite P10, can anyone tell me is it possible to set up the laptop to share my Internet remotely even if its WiFi, so it can be picked up by my Sony PSP. Then my cell phone would act as a wireless internet access point.
  As I do not have a router, don t know if it is possible this way any ideas?
  Thank you Michael.

  Hi Michael

  Well, I m not sure if it of possible the Sony PSP to connect to the laptop and if it works, but I found several useful information how to create make it the network connection wireless home in Windows XP without a router. Please check this links.

  http://www.Microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx

  http://www.annoyances.org/exec/show/ics_xp.

  Good luck

  Good bye