Corrupt VMDK Trojan?

Similar Questions

• external drive shows various corruptions of Trojan

  external drive shows various corruptions of Trojans, how to clean and remove my antivirus shows they are in quarantine but they pop up during movies

  continuously, all help out here?

  Hi paulcerda Sepulveda,.

  What antivirus software you have installed?

  (a) I recommend you run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.

  (b) you can also download & run Microsoft Security Essentials on your computer.

  Hope the helps of information.
  Please post back and we do know.

• Received a call from someone on Microsoft being corrupt and Trojans and spyware programs

  I allowed someone in my computer that said they called on Microsoft programs that have been corrupted.  Says that my computer was loaded with thousands of Trojans and spyware. In fact, they were from a company called EProctionz.  How can I be sure that my computer is safe.

  It's just a phone scam. Your computer will be safe as long as you don't allow them access. See this courtesy of Dave_M - http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/don-t-fall-for-phony-phone-tech-support.aspx

  Jim

• A file corrupt vmdk - VD: error VERR_VD_VMDK_INVALID_HEADER

  I recently had my VM accident and when I went to reboot the virtual machine, I received the information below.

  I tried to mount the drive but no luck, I got the same message.

  Help to recover the vmdk will be greatly appreciated.

  ERROR MESSAGE:

  Failed to open a session for the VM 64 common Indigo ROS.

  Unable to open the middle ' C:\Users\larmstrong\VirtualBox VMs\ROS Indigo municipality 64\ROS municipality 64_v1 Indigo - disk2.vmdk'.

  VMDK: descriptor does not start as planned in the ' C:\Users\larmstrong\VirtualBox VMs\ROS Indigo municipality 64\ROS municipality 64_v1 Indigo - disk2.vmdk' (VERR_VD_VMDK_INVALID_HEADER).

  VD: error opening image file VERR_VD_VMDK_INVALID_HEADER ' C:\Users\larmstrong\VirtualBox VMs\ROS Indigo municipality 64\ROS municipality 64_v1 Indigo - disk2.vmdk' (VERR_VD_VMDK_INVALID_HEADER).

  Result code:	E_FAIL (0X80004005)
  Component:	MediumWrap
  Interface:	IMedium {4afe423b-43e0-e9d0-82e8-ceb307940dda}

  After a first quick look, I found some metadata in the file you provided. What I've done, it's to correct what I've found so far (see attachment).

  ATTENTION: Please save the file hard before changing, to make sure that we have a way back to the original/current state!

  With the .bin file attached is executed:

  DSFI.exe ' ROS Indigo commune 64_v1 - disk2.vmdk ' 0 1536 "ROS Indigo commune 64_v1 - disk2.bin.

  to inject the modified metadata.

  If you still get errors, I would check the metadata for the whole hard. To extract the metadata is running:

  dsfo.exe ' ROS Indigo commune 64_v1 - disk2.vmdk "0 6619136" ROS Indigo commune 64_v1 - disk2.bin.

  André

• Cannot open the file Windows XP Proffesional.vmdk

  I can not power

  on cuz VM of this error, cannot open the file path ' ' Wnidows XP Professional.vmdk, the system does not give especified. Someone knows how to fix this? Help me pls.

  From what I have read it could be a corrupt vmdk file, so I'll share my for you guys.

  None of the binary scopes, "Windows XP Professional - s001.vmdk ' via ' Windows XP Professional - s305.vmdk", lack or size of 0 bytes?

• Viruse or something on Win XP?

  Hey guys, well I have this problem...

  I had some corrupted by Trojan registry files that my anti virus registred (talk about real sword 5 trial version) and because it is not a full version of anti virus I couldn't remove those using anti virus, but I havd to do it manually, I did.

  Once this anti-virus didn't detect it more which probably means that I removed from my computer.
  Now, the problem is that I have same questions without virus as I have.
  These questions would be, I can not open any page web antivirus as long as I don't look upward for some not so famous antivirus, I have also the problem editing Avira anti virus (whan I start instalation just disables the instalation without warning process).

  Another problem is that my printer is not working, and I can't run windows in safe mode.
  I'm 100% sure that this becouse happends to the virus (not sure of safe mode), now my question is: given that I removed the virus and it is not detectable, why I same questions as I have viruses?

  Can someone help me solve this problem and please tell me how :D

  THX in advance

  To be honest, I think the best way is to reinstall Windows.

  Sorry, but in this case there are a lot of dysfunction and it would take so much time to fix all.
  If you have the laptop recovery disk, boot from it and reinstall Windows.
  It only takes a few minutes.

• Msg.vmxaiomgr.retrycontabort.rudeunplug strikes again

  Hello

  I get this message

  Msg.vmxaiomgr.retrycontabort.rudeunplug:operation file "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" failed.

  ...

  The last thing I've done in this virtual machine was installing Microsoft updates.

  Someone at - it an idea?

  Hendrik

  with the exception of the journal

  15:21:18.212 Jan 19: vmx | VMXAIOMGR: Retry on write 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': unknown error 665 (0 x 299).
  15:21:18.212 Jan 19: vmx | VMXAIOMGR: System: err = 170242 errCode = 665 freeSpace = 213551165440
  15:21:18.212 Jan 19: vmx | VMXAIOMGR: 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': writing s = 49279991808 n = 65536 = 2
  15:21:18.212 Jan 19: vmx | VMXAIOMGR: v [0] = 30F14200:3584
  15:21:18.212 Jan 19: vmx | VMXAIOMGR: v [1] = 22AC000:61952
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: Retry on write 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': unknown error 665 (0 x 299).
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: System: err = 170242 errCode = 665 freeSpace = 213551099904
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': writing s = 49279991808 n = 65536 = 2
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: v [0] = 30F14200:3584
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: v [1] = 22AC000:61952
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: Retry on write 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': unknown error 665 (0 x 299).
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: System: err = 170242 errCode = 665 freeSpace = 213551099904
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': writing s = 49279991808 n = 65536 = 2
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: v [0] = 30F14200:3584
  15:21:18.213 Jan 19: vmx | VMXAIOMGR: v [1] = 22AC000:61952
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: Retry on write 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': unknown error 665 (0 x 299).
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: System: err = 170242 errCode = 665 freeSpace = 213551099904
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': writing s = 49279991808 n = 65536 = 2
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: v [0] = 30F14200:3584
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: v [1] = 22AC000:61952
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: Retry on write 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': unknown error 665 (0 x 299).
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: System: err = 170242 errCode = 665 freeSpace = 213551099904
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': writing s = 49279991808 n = 65536 = 2
  15:21:18.214 Jan 19: vmx | VMXAIOMGR: v [0] = 30F14200:3584
  15:21:18.215 Jan 19: vmx | VMXAIOMGR: v [1] = 22AC000:61952
  15:21:18.215 Jan 19: vmx | VMXAIOMGR: Retry on write 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': unknown error 665 (0 x 299).
  15:21:18.215 Jan 19: vmx | VMXAIOMGR: System: err = 170242 errCode = 665 freeSpace = 213551099904
  15:21:18.215 Jan 19: vmx | VMXAIOMGR: 'D:\Virtual_Machines\Arbeit\Arbeit.vmdk': writing s = 49279991808 n = 65536 = 2
  15:21:18.215 Jan 19: vmx | VMXAIOMGR: v [0] = 30F14200:3584
  15:21:18.215 Jan 19: vmx | VMXAIOMGR: v [1] = 22AC000:61952
  15:21:18.215 Jan 19: vmx | Msg_Question:
  15:21:18.215 Jan 19: vmx | failure of the operation on the file "D:\Virtual_Machines\Arbeit\Arbeit.vmdk" [msg.vmxaiomgr.retrycontabort.rudeunplug].
  15:21:18.215 Jan 19: vmx | If the file is located on a remote file system, make sure that your network connection and the server on which resides this disk to work correctly. If the file is saved on a removable medium, link media.
  15:21:18.215 Jan 19: vmx | Choose Retry to retry the operation.
  15:21:18.215 Jan 19: vmx | Choose to Abort to terminate this session.
  15:21:18.215 Jan 19: vmx | Choose to continue to pass the error to the guest operating system..
  15:22:18.946 Jan 19: vmx | Msg_Question: answer = 1 msg.vmxaiomgr.retrycontabort.rudeunplug
  15:22:18.946 Jan 19: vmx | Msg_Post: WARNING
  15:22:18.946 Jan 19: vmx | [msg.vmxaiomgr.corrupted] VMware Server cannot synchronize with the disk before giving up. D:\Virtual_Machines\Arbeit\Arbeit.VMDK disc may be incompatible.
  15:22:18.946 Jan 19: vmx | ----------------------------------------
  15:22:18.964 Jan 19: vmx | User has requested abandonment: get out due to the operation of disk failure.
  15:22:18.964 Jan 19: vmx | Using Win32 object: GDI 4, 5 USERS
  15:22:18.964 Jan 19: vmx | CoreDump_CoreDump: fake emergency to get the context

  well - it's the missing piece

  Compressed NTFS is a bad choice to store VMDK.

  VMDK stored on compressed NTFS may crash at any time - leaving the corrupt VMDK.

  I would like to decompress the d: partition if possible - otherwise move the virtual computer to NTFS uncompressed location

• Storage VMotion failed - LUN "Ongoing resource of use"

  I had a VM, sitting on an oversized LUN, so I reduced the size of the LUN.  The result is a corrupt VMDK.  It's nice that I can rebuild not the end of the world.  The problem is that when I right click on the virtual machine, that it only allows me to "Migration complete" - I can't delete the virtual machine.  If I select a full Migration it will fail to 33% with the error "the virtual disk is either corrupt or not a format supported."  If I tried to remove the source LUN or destination LUN I get an error "resource is in use.  So my question is how do I get rid of this virtual machine and these LUNS so I can start again.

  I'm on ESX 3.5 U4 on CF to FAS2020. Let me know if you need more information.  Thanks for any help!

  Always disconnect shows upward in the inventory.  This part of a cluster?  Disconnect the server. Remove the host ESX to vCenter.  Then, add it in.  Sometimes, remove the server from the cluster is enough, but you may need to remove the vCenter server.

  -KjB

  VMware vExpert

• Virtual disk is not valid or needs repaired

  We have problems try to import our backups of VMware Consolidated Backup for ESX 3.5 using the VMware vCenter converter standalone 4.0. The error we receive is "vitrual disk is invalid or needs repaired. We used the following steps.

  created the VM snapshot with the following script

  cscript C:\Program Files (x 86) \VMware\VMware Consolidated Backup Framework\generic\pre-command.wsf C:\Program Files (x 86) \VMware\VMware Consolidated Backup Framework vcbtest.otc.edu fullvm

  copied the folder mounted where VCB

  delete the virtual machine

  Open the VMware Converter and tried to import the virtual machine

  Here is the part of the logs

  DISKLIB-SPARSECHK: Grain #32694 @4185472 is an orphan.

  DISKLIB-SPARSECHK: Grain #32695 @4185600 is an orphan.

  DISKLIB-SPARSECHK: 32696 orphan (s) detected

  DISKLIB are RARE: "Snapshot Backup Test C:\vcbtest.otc.edu-fullVM\scsi0-0-0-ESX - s001.vmdk ': cannot open (14): disc needs to be repaired.

  DISKLIB-LINK: 'C:\vcbtest.otc.edu-fullVM\scsi0-0-0-ESX Snapshot Backup Test.vmdk': cannot open (the specified virtual disk must be repaired).

  DISKLIB-STRING: 'Snapshot Backup Test.vmdk C:\vcbtest.otc.edu-fullVM\scsi0-0-0-ESX': cannot open (the specified virtual disk must be repaired).

  DISKLIB-LIB: unable to open "C:\vcbtest.otc.edu-fullVM\scsi0-0-0-ESX Snapshot Backup Test.vmdk" with flags 0xe (the specified virtual disk must be repaired).

  14 error opening drive Snapshot Backup Test.vmdk C:\vcbtest.otc.edu-fullVM\scsi0-0-0-ESX.

  Virtual disk is invalid or needs repair

  TaskImpl failed with MethodFault::Exception: converter.fault.MalformedDiskFault

  Any help would be greatly appreciated

  that corrupt vmdk - best thing you can try is copying the vmdk on a Windows host and try to read with vdk

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• VMDK file corrupted

  I have corrupted files vmdk and tried a few elements in order to retrieve the data, and have so far not had much luck.

  I downloaded the virtual disk Development Kit and ran the vmware - vdiskmanager.exe on main vmdk file.  All I get is that the file is corrupted and cannot be repaired.  I tried to install the trial of the workstation Pro... happy to pay for it if she fixed my drive... and that did not help much.

  I tried to use Stellar Phoenix data recovery Virtual Machine ... who actually was able to see the files... most of them at least... but recover them I have to pay $300.  I'd rather pay money for Pro workstation so I have something to use later $300 for recovery I need I hope just this one time.  Then... Are there additional options?  Is there a data recovery integrated with Pro Workstation somewhat like what is the use of Stellar?

  Thank you!

  Get 12 WS very probably not help.
  I need some details - call me via Skype if you want

  Ulli

• The VMDK Corruption after VDP 6 backup

  Hello

  I went to migrate a server this morning after that POS had finished its backup jobs and noticed that one of my virtual machines showed their hard disks as 0 b.

  I removed the hard drives in the hope of re - add to the virtual machine by trying to re-add that no records were listed in the virtual computers folder when browsing the data store.

  Then the research manually the data store, these are the files listed:

  SERVER - ctk.vmdk

  SERVER - flat hard

  Server_1-000001 - ctk.vmdk

  Server_1-000001 - delta.vmdk

  SERVER_2 - ctk.vmdk

  SERVER_2 - flat hard

  But NONE of these vmdk are listed by trying to pick up the VM.

  Can anyone help me / point me in the right direction?

  Very appreciated

  From the information provided, I created the file descripter is missing for the snapshot file / delta and modified the virtual machine configuration (.vmx) file.

  What you need to do is:

  • Download the two files in the folder of the virtual machine
  • Remove the block chanhed (ctk.vmdk...) track files, or make sure that the next backup is a full backup
  • Delete the file .vmsd
  • reload the file the.vmx (see http://kb.vmware.com/kb/1026043)
  • create a new snapshot, so that you can return to the case that something does not work as expected

  Given that the virtual machine has been turned on with the basic disk, I highly recommend running chkdsk to fix any possible data corruption.

  After this - if everything works as expected - be sure that you 'Delete All' snapshot in the snapshots, provided Manager you annex free disk space (up to ~ 300 GB may be necessary).

  André

• VMDK is corrupted after host Hang

  Hello

  3.1 Fusion running on 10.6.4 and I have a Windows 7 virtual machine that does not start. Fails with the message:

  Cannot open disk or one of the snapshot disks it depends on.

  Reason: the specified virtual disk must be repaired.

  I ran:

  / Library/Application\ Support/VMware\ Fusion/vmware-vdiskmanager - R "Windows 7.vmdk".

  And the following message is invited in the terminal:

  The virtual disk 'Windows 7.vmdk', is damaged, but the repair process failed.

  ..

  Any help with this would be appreciated. I'm kinda stuck right now because I don't have access to a backup. My virtual machine directory contains the following files:

  564d6ff3 - 960C - 01 has 7 - 66 8 - 2d1e487b76de.vmem Windows 7 - s010.vmdk Windows 7 memory nvram

  564d6ff3 - 960C - 01 has 7 - 66 8 - 2d1e487b76de.vmem.lck Windows 7 - Windows 7 vmdk s011.vmdk

  Windows 7 - Windows 7 vmsd s012.vmdk applications

  Windows 7 - s001.vmdk Windows 7 - s013.vmdk Windows 7. VMX

  Windows 7 - s002.vmdk Windows 7.vmx.lck Windows 7 - s014.vmdk

  Windows 7 - Windows 7 - Windows 7 vmxf s015.vmdk s003.vmdk

  Windows 7 - Windows 7 - s016.vmdk appListCache s004.vmdk

  Windows 7 - Windows 7 - s017.vmdk quicklook s005.vmdk - cache.png

  Windows 7 - Windows 7 - s018.vmdk vmware - 0.log s006.vmdk

  Windows 7 - Windows 7 - s019.vmdk vmware - 1.log s007.vmdk

  Windows 7 - Windows 7 - s020.vmdk vmware - 2.log s008.vmdk

  Windows 7 - Windows 7 - s021.vmdk vmware.log s009.vmdk

  ..

  I tried to import the virtual machine to another virtual machine, and it fails with the same message.

  Thank you

  Mark

  It turns out that the file is missing only one block of 64K at the end, who could probably get written when the system blocked. Therefore very little loss of data.

  Please make a backup of Windows 7 - s013.vmdk (or the VM around just to be sure). Then run the following command to add a block of 64K of zeros at the end of the file:

  dd bs=64k count=1 oseek=15742 conv=notrunc if=/dev/zero of="/Users/markburgess/Documents/Virtual Machines/Windows 7.vmwarevm/Windows 7-s013.vmdk"
  

  The new file size should be 1031733248 bytes. Try to run the virtual machine with the fixed file and download the new vmware.log if there another error (it is possible that the other files of measure were also corrupt).

  I recommend you do a check disk Windows complete with chkdsk /f as soon as it is running, to make sure it gets repaired if necessary.

• Split VMDK - some corrupted files

  We had an outage on a host VMware Server 2.0 and two files that were part of a split VMDK file, have been corrupted.  We ran:

  fsck.reiserfs--rebuild-Arbre/dev/sda2

  For I hope to bring those corrupted files back to life, but no, they are completely missing

  I know it's a stretch, but it is anyway to bring back this VMDK to life, although it missed about 4 GB of data?

  It's on a virtual machine Windows Netware 6.5.  When I go to the 'parent' VMDK file and remove the lines referring to these two files, I can add that virtual disk back, but the server Netware do not see as valid a partition.

  Hello

  you have backups of the missing sections - even if they are very old?

  We need to replace the missing slices increments using the exact same file system and partition layout.

  So we plan A = replace the missing slices with one of a backup you have ay

  Plan B = recreate the same exact drive to produce new slices.

  If you need to create a new brand of disc you are using the same partition as the original used layout and format with the same options you used before.

  I did before with disk formatted NTFS and ext3 - in these cases, we could restore most of the files.

  I don't know how Netware will react to this?

  Ulli

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• VMDK deleted NTFS corruption

  We had someone accidentally press the DELETE key on a folder in one of our data warehouses.  Of course, as soon as they did all the files except the apartments have been removed for this Windows 2003 server.

  With Vmware, we have been able to rebuild the VMDK and start the system.  This system has a basic disk and the snapshot 1 or snapshot 2.  Snapshots are properly sorted and when we started the system she wanted to do a check disk.  When you have finished checking the disk it is reported that the software registry hive has been broken.  We've fixed the registry using the copies in the directory system32 of repair of the operating system.

  When you go to a part of the directories, however, they are not able to access due to an error of alteration that we receive.  Anyone have any suggestions on some utilities that we could use to recover data from those directories that we cannot access?

  At first glance, it seems that the chaining is not correct.

  As I understand it (in regards to the timestamps) should be:

  Basic-->--> 000001 000003

  and the string is constructed as:

  Basic---> 000001 (ignorant 000003)

  However, I need power to the top of my test to double check system.

  I guess the 000001 is the vmdk referred to in settings of the VM HARD drive!

  Could you please your newspaper of zip files and join them for me?

  André

• VMDK corruption after an accidental deletion...?

  Hey guys,.

  I did some poking around here and I couldn't find a discussion that corresponded to the situation for which I face.  I pray to GOD I'm not screwed...

  The short of it... MacBook Pro in Win XP Pro SP3 via VMware Fusion.  Works very well yesterday.  Had a bunch of clutter on my desktop Mac and moved a bunch of stuff in the trash... including my virtual XP machine package. (OF OOOH) Stop at the end of the day not shown any sign of problems.  When I went to start this morning I get the "file not found: Windows XP Professional-000002 - s002.vmdk.  Instantly, I knew it.  Restored the VM package on the desktop and it does not contain this file, but merge seems to ignore the fact that it is there.

  Here is an excerpt of the .log file:

  18:58:11.824 Aug 10: vmx | USB: If you unplug the unit 0x200000010e0f0002

  18:58:11.824 Aug 10: vmx | USB: If you unplug the unit 0x400000010e0f0003

  18:58:12.119 Aug 10: vmx | SOCKET 2 (301) close VNC taken on VNCBackendDestroy

  18:58:12.119 Aug 10: vmx | GLPrimaryDestroy, thread vmx

  18:58:12.180 Aug 10: vmx | MKS local poweroff

  18:58:12.913 Aug 10: vmx | scsi0:0: numIOs = 833355 numMergedIOs = 110454 numSplitIOs = 15124 (12.0%)

  18:58:13.658 Aug 10: vmx | FILE: FileIO_Unlock on "/ Users/jklinger /." Trash/Windows Professional.vmwarevm XP / Windows XP Professional - 000002.vmdk' failed: no such file or directory

  18:58:13.660 Aug 10: vmx | FILE: FileIO_Unlock on "/ Users/jklinger /." Trash/Windows Professional.vmwarevm XP / Windows XP Professional - 000001.vmdk' failed: no such file or directory

  18:58:13.662 Aug 10: vmx | FILE: FileIO_Unlock on "/ Users/jklinger /." Trash/Windows Professional.vmwarevm XP / Windows XP Professional.vmdk' failed: no such file or directory

  18:58:13.662 Aug 10: vmx | Cannot find the file Windows XP Professional - 000002.vmdk

  18:58:13.796 Aug 10: vmx | WORKER: asyncOps = 928603 maxActiveOps = maxPending maxCompleted = 31 19 = 28

  18:58:15.215 Aug 10: vmx | VMMon_UnlockPage: failure of uvAddr = 5000 132D, errno = 22

  18:58:15.279 Aug 10: vmx | VMX/execState/val goes to poweredOff

  18:58:16.804 Aug 10: vmx | vmdbPipe_Streams could not read: OVL_STATUS_EOF

  18:58:16.805 Aug 10: vmx | Output of idle VMX

  18:58:17.221 Aug 10: vmx | MachPoll: failed to mach_port_extract_member for port 37647 (17)

  18:58:17.250 Aug 10: vmx | Throw mainmem: start

  18:58:17.250 Aug 10: vmx | MainMemSyncPageFile: Unable to mmap: 12

  18:58:17.529 Aug 10: vmx | VMX VMDB Flushing connections

  18:58:17.533 Aug 10: vmx | IPC_exit: disconnect all discussions

  18:58:17.533 Aug 10: vmx | Exit VMX (0).

  Thanks in advance,

  -Jason

  This is probably because the file Windows XP Professional.vmsd being a length of zero, when it does not, however, this is what I would try...

  Shutdown, not, suspend the Virtual Machine, and then close merger.

  In the Finder, open the packaging of the Virtual Machine and file ctrl + click on the Windows XP Professional - 000002.vmdk and select open with > VMDKMounter

  If it can be installed without error, that there should be an icon without a title the office which you can then browse and see if your returned data user is there and if you should save the user data before you do anything else.