corruption of the CD/DVD-RW device

Similar Questions

• Last update of Windows 7 is hidden or corrupt all the drivers of USB devices on my system.

  Automatic update of Tuesday last Windows 7 has killed the mouse USB and almost all USB storage devices that I use on the system. I tried several mouse and all report an error that it cannot find a driver now and that I should replace the unit. Microsoft mouse works fine on other computers - tried on three other machines, 2 running Windows 7 that did not update and a Vista running. All USB storage devices work on the other two machines. It seems that the last update has trashed the directory or the USB driver cache because the system can not find more.

  Tried to run the software "fix it" Microsoft with no luck. Also tried several other suggestions Microsoft forum without success.  I am a student and having papers coming due next week so need to fix this quickly.

  Hello

  (1) what is the Microsoft FIXIT you have tried to solve this problem?

  (2) who is the last (KB) update installed on your computer?

  (3) have tried to run the system restore?

  Method 1: Uninstalland reinstall the USB controller

  Use Device Manager to disable and re-enable all the USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  (a) click Start, type device management in the start search box and press ENTER.

  (b) expand Bus USB controllers.

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  (d) repeat step 4 for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  Hope this information helps.

• problem with the CD/DVD ROM device

  Windows nofified it is problem with my CD ROM havin - two of them! I tried Windows troubleshooting. He tried to reinstall the driver but it failed.
  Then I tried Windows Update to see if I can find an update of the driver but he could not find any update related to my CD ROM
  Now I don't know wt to do at all!

  Hi khadija.

  1. you receive messages or error codes?

  You can read the following article and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.

• "A required CD/DVD drive device driver is missing."

  The product name is HP G6 1331sa / A8M93EA #ABU

  OS - Windows 7 Edition Home Premium x 64

  Error message

  

  If you do not see the image, the link is http://prntscr.com/18s2dm

  What I try to do is to install a new copy of Windows 7 Professional x 64 Microsoft. I have the motivation to not use recovery discs and I have done this before on different computers and so are aware of having to reinstall the drivers

  Anyone know where I can download the driver for the "CD/DVD drive device driver? Checked on the support page for this laptop, found nothing

  The recovery discs work very well, but I don't want to use

  Thanks for reading,

  -James

  Hi, James:

  Most likely the media you use is incomplete or a bad burn to the DVD if you have the installation media of the ISO download on Digital River.

  There is no missing drivers. W7 has all the drivers needed to install on your model.

  Follow these instructions and see if you can get W7 installed in this way.

  I would use the MS tool USB ISO.

  Make sure you absolutely get the entire ISO file when you see the download complete message.

  Sometimes, he reports the download is finished and your ISO file is a lot smaller that what he said was downloading.

  Use the W7 pro product key you have.

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the USB compilation method.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• My Windows Vista laptop (dv9000 HP) is unable to update the drivers for the drive DVD-cannot use the device.

  The above mentioned laptop displays error Code 39 in Device Manager. I tried to remove the device and scan for hardware, but not able to download the drivers needed to use the device. Help, please. Thanks to you all.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  There are many causes of Code 39 errors in Device Manager:

  a. a required device driver is missing.

  b. a required binary file is corrupt.

  c. There is a problem with the file I/O process.

  (d) a pilot that refers to an entry point in another binary file cannot load.

  The recommended solution is to remove the device and reinstall the drivers for this device. As you have tried this step, I suggest you to try the steps mentioned below and check:

  Step 1:

  Try the fixit mentioned first and check if the dvd player works:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

  http://support.Microsoft.com/kb/929461

  Step 3:

  Try the steps in the following link and check if the dvd player works:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you have any questions do not hesitate to answer, we would be happy to help.

• WHILE the error is absent INSTALL WIN 7 I AM facing ISSUE is to say--a required cd/dvd drive device driver

  Hello Sir

  I recently brought lenovo s20 nootbook laptop with win8.1. now I want to change it for win 7 but at the start of the process, I am faced with the question IE a required cd/dvd drive device driver is missing error.

  Hi Kothalanka,

  We are there to answer your concern about the installation process of Windows 7 .

  Here are the following reasons why a required CD/DVD drive device driver is missing error message occurs:

  • The installation DVD is removed during the installation process.
  • A bad quality DVD has been used to create the installation DVD.
  • The speed at which the installation DVD is burnt was too fast.
  • The DVD drive cannot read media.
  • The ISO file is corrupted.

  To resolve your concern, we suggest you use one of the following methods, depending on your situation:

  • Burn the DVD to install at a slower speed.
  • Best DVD quality to create the installation DVD.
  • Update BIOS firmware for your DVD player.
  • Windows 7 USB/DVD Download tool allows you to create a bootable USB key and then use the USB flash drive to install Windows.

  If you still encounter the same error after doing one of the above resolution, here are a few troubleshooting methods that you can do:

  • Run the DVD on another computer to determine if the DVD works properly.
  • Test your DVD player using a Windows installation DVD official.
  • Attach the ISO file to a virtual machine to verify if it is corrupted.

  For more information on how to resolve the error a required CD/DVD drive device driver is missing , click here.

  Do not forget to back up your files by using a storage device externally (for example USB, external HARD drive) before installing Windows 7 , in order to avoid any possible data loss.

  Let us know how it goes.

  Kind regards.

  You can use the mark as answer button, if this post responds to your request.

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• BIOS does not detect the CD/DVD on Satellite A205-S4639 device

  Hello!

  My laptop Toshiba works not very well, he has the following problem:

  When I enter the BIOS program (by pressing F2) main 'BIOS hand', the CD/DVD device does not appear in the module.
  Click on the link of the image: [main BIOS | http://softvaina.googlepages.com/BIOS.Main.jpg]

  Then, I go to the BIOS boot module and the CD/DVD device appears in the list of boot devices, che the image link: [BIOS Boot | http://softvaina.googlepages.com/BIOS.Boot.jpg |] BIOS Boot]

  Finally, I try to boot from the CD/DVD-ROM and it works (check this box [Image | http://softvaina.googlepages.com/BootMenu.jpg |]) Boot menu]).

  In the environment of OS (Ubuntu and Windows XP), the CD/DVD device does not appear, and it does not work.
  The laptop features:

  Make/model: TOSHIBA Satellite A205-S4639
  T.O.D.: 160 + 120 GB
  RAM: 3 GB DDR2
  Video: NVIDIA GeForce Go 7300
  Optical drive: PIONEER DVD - RW DVR-K17LF

  Note: I've updated the BIOS, but the problem persists.

  What is going on?

  > Then, I go to the BIOS start module and the CD/DVD device appears in the boot device list, click the link of the image: BIOS Boot
  It is a boot menu and it always seems to know whether or not the CD/DVD or HARD disk drive has been inserted!

  In my opinion, your CD/DVD drive is faulty or there is no link with the portable CD/DVD player.

  A mobile technician must verify and if necessary should replace

• Qosmio G30-201 HD DVD "Impossible to the release of the video on a device ext.

  Hello
  Continues to have problems reading of a HD DVD on my Qosmio, using the reader of HD DVD from Toshiba running Vista Ultimate
  Getting two messages:

  "Unable to output the video to an external device. Pls change your display device by pressing end + F % keys after the end of the app '

  and

  "Cannot read. Another application can use the video function of the PC and can be running "."

  I am unable to move in these messages, and Fn + F5 does not solve the problem. I'm trying to display the Qosmio screen, not on an external device. I want to output to a TV via HDMI.

  I last updated the BIOS, driver Nvidia, HD DVD and firmware 20071005144518 and 29 [even if a firmware update said there is no such update available with downloaded.]

  This problem exists with two HD DVD, heroes and Batman Returns.

  Help

  Concerning

  Nick

  Hello

  It seems that you are using Vista Ultimate and not the original Vista that was preinstalled on the Qosmio G30.

  I think I know why Toshiba HD player produces this error message.
  Always is that the Toshiba HD player that is on the page of the Toshiba driver is not a full version but only the update. The full version of the HD DVD from Toshiba drive did not appear on the page of the Toshiba driver due to some restrictions.

  If you want to use the HD DVD player, you must install the Toshiba image, and then you could install the update of the page.
  But note; the recovery CD Toshiba which contains the image will format the whole HARD drive.
  This is why don t forget to back up your data.

• where can I find a driver for the jlms dvd rom? 166 the code 41 when I ran device mngr

  where can I find a driver for the jlms dvd rom? 166 the code 41 when I ran device mngr

  http://www.Dell.com/support/drivers/us/en/19/driverdetails?DriverID=RM3KY

  do you have a dell?

  You can go to dell drivers and downloads page, enter your express service code and all the relevant drivers to your system will be displayed.

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can see the CD/DVD drive in Device Manager, but it will play all discs.

  LG GH 22N S50 DVD/CD PLAYER WON'T PLAY DISC

  LIES IN THE MANAGER OF DEVICES AND MY VISTA ULTIMATE 64 BIT, GIGABYTE MOTHERBOARD INTEL E8500 CPU COMPUTER
  IS A CHIPSET ISSUE?
  DOWNLOAD FIRMWARE OF SAMSUNG USA SITE AND of GETTING "Cannot FIND TARGET" WHEN I RUN THE FIRMWARE UPDATE
  DOWNLOADED FROM TURKISH SITE AND INSTALLED TN02 BU T STILL NO CHANGE
  MANY FIXES SAY GO TO REGDIT AND... UPPER FILTERS AND LOWER...
  BUT I DON'T HAVE UPPER AND LOWER FILTERS TITLE IN MY REGISTRY
  Original title: GH22N S5O dvd/CD players IS in DEVICE MANAGER BUT WILL NOT PLAY DISC IS in MANAGER of DEVICES

  Hello

  You can contact the manufacturer that the problem is related to the installation of the firmware update, and similarly, there may be hardware related problems with the CD/DVD drive.

• Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.

  I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.

  A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.

  I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»
  could someone help please.
  Thank you.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  =======================================

  As needed check with the Sony Support, their drivers and documentation online and ask in their forums
  on the problems known.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows vista Manager or the device does not recognize the cd/dvd drive

  I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.

  I tried these steps with no luck

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hello mike salinas.

  1. you have any third-party burning software installed on your computer?

  2. have you checked if the external CD drive works on another computer?

  I suggest that you check if your internal CD-ROM drive is detected in the BIOS.

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.

  You can see the article for more information about the BIOS:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Regarding the external CD/DVD drive, I suggest you see if it works on another computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows 7 cannot install from the cd/dvd-rw LG GH22NS90 player. "the CD/DVD device driver is missing" message is presented. How can I recognize the device?

  Separated from this thread.

  I have the same problem, my Windows email me the error code (19) of register incomplete or...
  I have download the drivers from the web LG.com and he send me, devide cant find.

  I try, I try and without operation = s help to respect? THX

  Hello Hendry,

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions using the CD/DVD drive in Windows 7 computer. We will certainly help you with the same.

  I would like to know some more information on this issue to help you better.

  1. Are you able to access the other CD/DVD drive in Windows?
  2. You try to install the drivers for any device?
  3. When say "Windows send me error code (19)", you get this error message in Device Manager?

  In the meantime, please follow the below suggestion to solve the problem.

  The error code 19 occurs when data in the registry for the device and its driver were damaged.

  For more information on this error, follow the link below:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  () Also applies to Windows 7 as well ()

  http://TechNet.Microsoft.com/en-us/library/cc772156 (v = WS.10) .aspx

  Additional information:

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward and restore the registriesry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.