Could not create constants/controls/indicators from the XML parser

Similar Questions

• Could not create Java class: associated with the region:

  Hi all
  
  I extend the gamepad standard oracle.apps.pos.supplier.webui.SuppSummCO
  With a controller custom xxmycomp.oracle.apps.pos.supplier.webui.XXSuppSummCO
  
  I built the project in my local JDEV
  Updated the custom controller and place it under $JAVA_TOP
  I even checked by ls-l $JAVA_TOP/xxmycomp/oracle/apps/pos/supplier/webui/XXSuppSummCO.class
  
  
  I gave all the folder permissions of xxmycomp under $JAVA_TOP (chmod-r 777 xxmycomp)
  
  I did the rebound in core OC4J
  
  After you have set the controller custom level of personalization of the region site.
  When I'm back to the application, I get the following error
  
  oracle.apps.fnd.framework.OAException: could not create Java class: (xxmycomp.oracle.apps.pos.supplier.webui.XXSuppSummCO) associated with the area: (PageLayoutRN). It is probably because the class name is incorrect or not included in the project.
  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247)
  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
  at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2559)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1894)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:538)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:426)
  in OA. jspService(_OA.java:212)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
  in com.evermind.server.http.ServletRequestDispatcher.access$ 100 (ServletRequestDispatcher.java:51)
  to com.evermind.server.http.ServletRequestDispatcher$ 2.oc4jRun(ServletRequestDispatcher.java:193)
  at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
  at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
  at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
  to the RFjspService(_RF.java:225)
  
  
  
  The custom controller is for test and has only the following code
  
  public void processRequest (OAPageContext oapagecontext,
  OAWebBean oawebbean)
  {
  super.processRequest (oapagecontext, oawebbean);
  }
  
  public void processFormRequest (OAPageContext oapagecontext,
  OAWebBean oawebbean)
  {
  super.processFormRequest (oapagecontext, oawebbean);
  }
  
  I created the directory xxmycomp under $JAVA_TOP
  I have read only access to the other directories under $JAVA_TOP outside xxmycomp.
  
  Can someone help me solve this error?
  
  I do the same steps in another case where it works very well.
  
  
  
  
  Kind regards
  Chaouki

  Two things:
  1. check that you have moved the code of the application server and database server
  2. check the path (spaces, upper/lower case etc.)
  3. check the permissions of the file.

  If all goes well, then make a backup of existing on the server controller and redeploy the file (compile the file in Jdeveloper, after removal of the myclasses directory). Bounce the server.

  Concerning
  Sumit

• XEngine error - error from the XML parser

  Hello
  
  I configured EDI X 12 generic exchange for outgoing FTP. I generated data EDI841 of the B2B document editor. When I try to send xml 841, I get the following log in the b2b.log file
  
  
  Error in brief:
  5083: XEngine error - error in the XML parser.
  
  iAudit report:
  <? XML version = "1.0" encoding = "UTF-16"? > < AnalyzerResults Guid = "{29FD00C2-DE93-4B22-AD75-9462FDB54F3F}" > < ExecutionDate > Thursday, November 20, 2008 < / ExecutionDate > < ExecutionTime > 19:55:18 (normal time of the India) < / ExecutionTime > < AnalyzerReturn > Failed < / AnalyzerReturn > < NumberOfErrors > 1 < / NumberOfErrors > < ErrorByCategory > < Category Name = "Reject" > < name of gravity = 'Normal' > 1 < / gravity > < / category > < / ErrorByCategory > < status > completed < / status > < DataFile > < FilePath > D:\OraHome_ 2\ip < / FilePath > < FileName / > < LastModified / > < FileSize / > < DataURL > file:\\D:\OraHome_2\ip < / DataURL > < / DataFile > < AnalyzerErrors > < error ErrorCode gravity = "{C0046014-9F8C-4C50-8AD0-22176044D2D6}" = "Normal" category = "Reject" index = '1' ID = '50830000' > < ErrorBrief > 5083: XEngine error - XML parser error. < / ErrorBrief > < ErrorMsg > XML parser error. < / ErrorMsg > < ErrorObjectInfo > < 'ErrorLevel' > 0 = parameter name < / parameter > < parameter Name = "Name" > XData2Native < / parameter > < name of the parameter '_ec_dn_guid_' = > {BD729023-F5CD-497E-95CD-501129074879} < / parameter > < parameter = "_ec_index" > 0 name < / parameter > < name of the parameter = "ec_error_scope" > Document < / parameter > < / ErrorObjectInfo > < ErrorDataInfo > < Part1 / > < ErrData / > < Part3 / > < DataXPointer > < StartPos > 0 < / StartPos > < size > 0 < / size > < / DataXPointer > < / ErrorDataInfo > < / error > < / AnalyzerErrors > < / AnalyzerResults >
  2008.11.20 to 19:55:19:084: Thread-11: B2B - (DEBUGGING) = {C0046014-9F8C-4C50-8AD0-22176044D2D6} oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sErrorGuid
  2008.11.20 to 19:55:19:084: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sDescription = XML parsing error.
  2008.11.20 to 19:55:19:084: Thread-11: B2B - sBrDescription oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument (DEBUG) = 5083: XEngine error - error in the XML parser.
  2008.11.20 to 19:55:19:084: Thread-11: B2B - (DEBUGGING) ErrorLevel = 0 sParameterValue = oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName
  2008.11.20 to 19:55:19:084: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = sParameterValue Name = XData2Native
  2008.11.20 to 19:55:19:084: Thread-11: B2B - sParameterName oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument (DEBUG) = ecdn_guid_ sParameterValue = {BD729023-F5CD-497E-95CD-501129074879}
  2008.11.20 to 19:55:19:084: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = sParameterValue index ec= 0
  2008.11.20 to 19:55:19:084: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ec_error_scope sParameterValue = Document
  2008.11.20 to 19:55:19:084: Thread-11: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument (DEBUG) added pound key = {BD729023-F5CD-497E-95CD-501129074879}
  2008.11.20 to 19:55:19:552: Thread-11: B2B - lot of oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument (DEBUG) Position = 0
  2008.11.20 to 19:55:19:568: Thread-11: B2B - Error (ERROR) -: AIP-51505: General Validation error
  at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2231)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1610)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1131)
  at oracle.tip.adapter.b2b.data.MsgListener.onMessage (MsgListener.java:833)
  at oracle.tip.adapter.b2b.data.MsgListener.run (MsgListener.java:400)
  at java.lang.Thread.run(Thread.java:534)
  
  2008.11.20 to 19:55:19:568: Thread-11: B2B - Error (ERROR) -: AIP-51505: General Validation error
  at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2231)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1610)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1131)
  at oracle.tip.adapter.b2b.data.MsgListener.onMessage (MsgListener.java:833)
  at oracle.tip.adapter.b2b.data.MsgListener.run (MsgListener.java:400)
  at java.lang.Thread.run(Thread.java:534)
  
  2008.11.20 to 19:55:19:568: Thread-11: B2B - Error (ERROR) -: AIP-51505: General Validation error
  at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2285)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1610)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1131)
  at oracle.tip.adapter.b2b.data.MsgListener.onMessage (MsgListener.java:833)
  at oracle.tip.adapter.b2b.data.MsgListener.run (MsgListener.java:400)
  at java.lang.Thread.run(Thread.java:534)
  
  2008.11.20 to 19:55:19:568: Thread-11: B2B - Error (ERROR) -: AIP-51505: General Validation error: error -: AIP-51505: General Validation error
  at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2285)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1610)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1131)
  at oracle.tip.adapter.b2b.data.MsgListener.onMessage (MsgListener.java:833)
  at oracle.tip.adapter.b2b.data.MsgListener.run (MsgListener.java:400)
  at java.lang.Thread.run(Thread.java:534)
  Caused by: error -: AIP-51505: General Validation error
  at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2231)
  ... 6 more
  
  2008.11.20 to 19:55:19:568: Thread-11: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage, B2BDomainException
  2008.11.20 to 19:55:19:568: Thread-11: B2B - oracle.tip.adapter.b2b.engine.Engine:handleOutboundException (DEBUG) Update Error Message: error -: AIP-51505: General Validation error
  2008.11.20 to 19:55:19:568: Thread-11: B2B - (DEBUGGING) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState entry
  2008.11.20 to 19:55:19:584: Thread-11: B2B - message (DEBUG) AccessRepo:findBusinessMessageByB2BMessageId found successful with B2bMessageId: 96768985 and ProtocolMessageId 96768985
  2008.11.20 to 19:55:19:584: Thread-11: B2B - oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState (DEBUG) thread not found message.
  2008.11.20 to 19:55:19:584: Thread-11: B2B - oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState (DEBUG) update computer error message
  2008.11.20 to 19:55:19:662: Thread-11: B2B - (DEBUGGING) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState output
  2008.11.20 to 19:55:19:662: Thread-11: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException line Update Native event Tbl
  2008.11.20 to 19:55:19:662: Thread-11: B2B - (DEBUGGING) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow entry
  2008.11.20 to 19:55:19:662: Thread-11: B2B - message (DEBUG) AccessRepo:findBusinessMessageByB2BMessageId found successful with B2bMessageId: 96768985 and ProtocolMessageId 96768985
  2008.11.20 to 19:55:19:662: Thread-11: B2B - oracle.tip.adapter.b2b.msgproc.DbAccess (DEBUG):
  
  * DbAccess:updateNativeEvtTblRow:tip_wireMsg not found wiremsg
  2008.11.20 to 19:55:19:662: Thread-11: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException notification App
  2008.11.20 to 19:55:19:662: Thread-11: B2B - enter engine: notifyApp (DEBUG)
  2008.11.20 to 19:55:19:662: Thread-11: B2B - engine queue (DEBUG) AQJMSCorrelationID = 3AB8B0051B5E4C17A7D3DEF093027FF8
  2008.11.20 to 19:55:19:662: Thread-11: B2B - notifyApp:notifyApp (DEBUG) the exception ip message queue:
  < exception xmlns = "http://integration.oracle.com/B2B/Exception" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" >
  < correlationId > 96768985 < / correlationId >
  < b2bMessageId > 96768985 < / b2bMessageId >
  < errorCode > AIP-51505 < / errorCode >
  < > 5083 errorText: XEngine error - XML parser error. < / errorText >
  < errorDescription >
  <! [CDATA [info from the Machine: (PC022350)]]
  XML parsing error.  []] >
  < / errorDescription >
  < errorSeverity > 2 < / errorSeverity >
  < / exception >
  2008.11.20 to 19:55:19:662: Thread-11: B2B - (DEBUGGING) AQJMSCorrelationID = 3AB8B0051B5E4C17A7D3DEF093027FF8
  2008.11.20 to 19:55:19:755: Thread-11: B2B - output engine: notifyApp (DEBUG)
  2008.11.20 to 19:55:19:755: Thread-11: B2B - oracle.tip.adapter.b2b.engine.Engine:handleOutboundException (DEBUG) update successfully Error Message: error -: AIP-51505: General Validation error
  2008.11.20 to 19:55:19:755: Thread-11: B2B - validation DBContext (DEBUG): enter
  2008.11.20 to 19:55:19:755: Thread-11: B2B - validation DBContext (DEBUG): Transaction.commit)
  2008.11.20 to 19:55:19:755: Thread-11: B2B - (DEBUGGING) DBContext commit: leave
  2008.11.20 to 19:55:19:755: Thread-11: B2B - (DEBUGGING) oracle.tip.adapter.b2b.data.MsgListener:onMessage output
  
  Please help me solve this problem.

  a special character at the beginning of the file (before even the tag ) Please make sure that the XML is valid, no need to turn off validation w.

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• Could not create control PalSound PalSound.dll not saved

  Can anyone help with this. Could not create PalSound control, PalSound.dll not saved. Please re - install Paltalk and check the security settings for ActiveX controls. I put all the ActiveX to allow, but it did not work. Now whenever I log into Paltalk I uninstall and reinstall every time.  I see that this fast PC is constantly as a solution, but I'm not going to use a program I don't know or knows something about. I see that people have trouble then uninstall what type of malware is there? They then hmm Microsoft in any page here... I prefer to do the fault manually then I know for sure that it will work.

  Thank you very much
  Shirley

  Hello Shirley,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem together.

  If I understand correctly, you have problems with the PalTalk software.

  Please answer these questions to better understand the issue:

  1. Once you get the SpeedyPC pop up?

  2 have you made any changes to the computer before the show?

  SpeedyPC Pro is an innovative third-party software with advanced features to help you optimize your PC.

  Fast PC is not Microsoft.  Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved.

  For problems with PalTalk, you can post the question here:

  www.paltalk.com/PalTalkSite/support/network/networksup.html

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Cannot read Psychonauts off Steam error - the game could not create the Direct3d device. Please make sure your video drivers are installed properly

  Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:

  The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?

  Thanks again for the help.

  I'm not familiar with Apple but I found this:

  http://support.Apple.com/downloads/#NVIDIA

  Except that it is what I have from NVIDIA:

  http://www.nvidia.com/object/notebook_drivers.html

  Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")

• Error message - "Could not create the security default policy"

  I just reinstalled Acrobat X on a new computer (upgrade to Acrobat 8).  Now, when I open a file in Acrobat X, I get a message error that says "could not create the default security policy."   How can I fix? Pourrait

  Hi dawlaw,

  There is a bug in Adobe software. Acrobat X pro and standard both install properly if any other Adobe product was already installed, but both disrupts the installation (do not create the AppData\Security subdirectories) if another product from Adobe that has not created AppData\Security directories has been installed first. Adobe has only been tested installation on machines that never had other Adobe products installed. They do not consider that other Adobe products can already installed.

  (Alternative 1 (safer) - (a) uninstall all Adobe control panel products, b) then delete (or rename) the directories \AppData\Local\Adobe and \AppData\LocalLow\Adobe \AppData\Roaming\Adobe - Adobe never cleans these directories after uninstall. (c) make an own Acrobat x pro or standard installation before you reinstall any other Adobe product.

  Solution 2 - copy \AppData\Local\Adobe\Acrobat\10.0\Security and \AppData\LocalLow\Adobe\Acrobat\10.0\Security from another machine that works.

  Kind regards

  Nicos

• I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "E Yes

  I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "So even if Lightroom CC is installed, it will not launch.  What should I do to allow him to launch?

  I had the same problem, just bought a new Macbook Pro (June 2015) and Lightroom CC had this error as well.  Here is the dialog box that I've had with Adobe, and it cures the problem:

  Adobe: Please click on the search option in your Dock at the bottom of the screen.

  Adobe: Then click GO on the MenuBar at the top of the screen.

  Adobe:, and then click GO to folder, and then type: ~/Library/Application Support/Adobe /.

  Scott: OK, I did

  Adobe: Control-click on the folder and choose read information.

  Adobe: Expand the section sharing & permissions.

  Adobe: Click on + icon, and check if the administrator select

  Scott: OK, I chose the Admin

  Adobe: Give read and write to the Admini

  Scott: completed

  Adobe: Click the gear icon and select apply changes to included items

  Scott: OK

  Adobe: In the Finder window, click GO and select GO to folder

  Adobe: Type in
  Adobe: / Library/Application Support/Adobe/ and press enter

  Scott: completed

  Adobe: Control-click on the folder and choose read information

  Adobe: Expand the section sharing & permissions.

  Scott: ok

  Adobe: Give read and write permissions to all users

  Adobe: Then click on the sign + and add the rest of the users from the list

  Scott: completed

  Adobe: Now, please try to use the Lightroom from your computer.

  Scott: Thank you - it works!

  Hope this helps others.

• Could not create the work file. Check the temp environment

  After I did my Vista SP2 update, the only thing I could do was to reformat the HD. After all, including Office 2007 reloading, Outlook and work has worked well. Again, I went through the updates, Vista and Office SP 2 and now in Outlook and Word I get this error message Outlook (Word) could not create the work file. Check the temp environment

  variable. I am alos having other problems in Word. Help, I can't find all the answers!

  Follow the steps below at our own risk.  Set a restore point before doing this. Make a mistake in the registry can have bad results

  In your registry HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders\Cache Database Cache data value must be %USERPROFILE%\Local Settings\Temporary Internet Files

  Close all programs. Then in the registry editor, once you get in the folder above, right click on "Cache", make a left-click on "Change", paste in "%USERPROFILE%\Local Settings\Temporary Internet Files" (without the quotes), on the left, click 'Ok' close the editor of the register. Restart the PC.

  This should solve your problem.

  - Http://blogs.msdn.com/powlo/archive/2007/01/01/fix-for-error-outlook-could-not-create-the-work-file.aspx

  a. start-> Run-> enter "regedit" and press "Enter" to run the program to change registry variables.

  b. navigate to the folder-> "HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders\Cache"

  c. check the values of variables [for everything in the "User Shell Folders" folder] - all the variable should have values from '% USERPROFILE%\ '. ». Any variable that is not of this starting point is probably damaged. In my case, all variables corrupt has been a correspondent of "Backup_VariableName". Example: my variable "cache" was damaged when there is a variable called 'backup_cache' with the correct values

  d. change the value of variables corrupt to correct the values. Example of change variable value "cache" in "%USERPROFILE%\Local Settings\Temporary Internet Files" and so on.

  e. close all of Ms Office programs, and turn. The problem should be solved now.

  I added the text in square brackets [] above.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• LV 2016: LabVIEW could not create the required channel file permission error endpoint; NOR-488: Error of hardware detected DMA

  I just installed the new 2016 LabVIEW with the two patches and wanted to check the new feature.

  When you create a channel writer, there was a pop up select the Channel end point, but whatever the option chosen, there is a window saying "LabVIEW could not create the required channel endpoint", error ccode: 8 file authorization error

  NOR-488: Error detected DMA hardware.

  I have error permition from file to file, file that is?

  By chance, do you have re-defined the default data directory in LabVIEW?  LabVIEW uses to host files for the warp threads, and if you moved from its default position in your profile (C:\Users\\Documents\LabVIEW data), especially if you moved it to the root of C:, it could become unalterable.  This must remain in your profile!

  Bob Schor

• gpedit.msc - MMC could not create the snap

  OS: XP Professional SP3

  From gpedit from start > run > gpedit.msc, open the Group Policy window, but I get the following error in the right window:

  MMC could not create the snap
  MMC could not create the snap.  The snap-in may not be installed properly
  Name: Group Policy Object Editor
  CLSID: {8FCOB734-A0E1 - 11 D 1-A7D3-0000F87571E3}

  Please advise on how to solve the problem
  Thank you
  Mike.

  Adding:

  ; % SystemRoot%\System32\WBEM.

  to your PATH variable of environment is exactly the right thing to do for this message.

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• MMC could not create the snap-in when you run the Scheduler of tasks or event viewer

  Event Viewer and Task Scheduler are not running.

  Error returned is: mmc could not create the snap

  Someone knows how to solve this problem, I searched and tried everything I can find and it still doesn't work.

  can someone tell me the conditions required for the event viewer for work so I can check?

  I managed to solve this problem in this way on my Windows Server 2008 SP2:

  1. navigate to the following directory:

  For x 64:

  C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\CONFIG

  For x 86:

  C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\CONFIG

  2 backup 'machine.config' file from somewhere, just in case before you continue.

  3 Rename the machine.config file to machine.config.old in the directory above.

  Fixed a problem!

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.