Could not find preferences by clicking Outlook

Similar Questions

• Just upgraded to Windows 7 Pro. Could not find the normal system games (solitaire, spider solitaire,... etc.). Where are they?

  I have just upgraded to Windows 7 Pro.  Could not find the normal system of games (Solitaire, solitaire spider, mine sweeper, etc.).  Where are they?

  Go to control panel > programs and features > turn Windows features on or off and place a check next to games and click OK. Carey Frisch

• We could not find settings for < email address > provide us with more information, and we will try to reconnect.

  We could not find settings for provide us with more information, and we will try to reconnect. and I am using a comcast email, I can sync it on my outlook through outlook.com but he wont "Let me add through to add it as an account with my Win User 8..." I use an email from comcast, nothing works and I also tried to my gmail but gmail works

  http://answers.Microsoft.com/en-us/windowslive

  This is the forum for email.

  Sorry I couldn't help you.

• Windows could not find a certificate to log on netgear47

  I have 2 laptops, Dell is connected and the notbook connects without a problem.  I try to connect this old Vaio pcg - K33 K series and the message above. It comes to XP.

  I hung a cable from the router to the computer and can get online but still can't hang wireless.

  Your information is somewhat distorted, but I guess that what follows:

  'Netgear47' is a model of a Netgear wireless router.

  The error message that you get on the Vaio is similar to "Windows could not find a certificate to connect to the network.

  What version AND service pack of Windows XP is installed on the Vaio (right click my computer and select Properties, if you do not know).

  The most likely problem is that on the Vaio's wireless adapter is misconfigured.  If you use Windows wireless zero configuration (WZC) to configure the card (and not a utility provided by Sony), see the following for directions on how to correct this problem: http://helpdeskgeek.com/how-to/windows-was-unable-to-find-a-certificate-to-log-you-on-to-the-network/

  While you are on the "Wireless network connection properties" screen (in the middle of the 3 images on the site linked), look at the box at the top ('use Windows to configure my wireless network').  If this box is NOT checked, then the fix suggested on the web site may not work and you will need to use the utility Sony to make a similar change. In this case, it may be easier to simply delete the 'profile' of your network in the utility of Sony. When you try to connect after you have deleted the profile, the network must be configured correctly.

• can not get the wireless network... saying "windows could not find a certificate to log in to a network.

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Thanks for posting. Follow the instructions below carefully.

  1. Click Start > run > type or paste devmgmt.msc > click Ok or press ENTER.
  2. Scroll down to network adapters. Develop the content by clicking on the symbol +.
  3. Locate your wireless adapter. Right-click on it and choose uninstall. Confirm the prompt.
  4. Restart your computer. Allow Windows to detect the new hardware. The driver and the device needs to be reinstalled automatically the resolution of the problem.

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

  the system could not find the environment option that was entered

  Hi Yasish.P,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when you get this error message?

  Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  You can see the link below for more information.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."

  Cannot delete the file.  Says "not not found could not find this item check the location of this object and try again."

  I got this file from my friend got sent - is a word document, I had on their computer.  So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded.  Does not work.

  When I check the properties, there is no security tab so I can't transfer ownership in this way.

  I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long.  I can't rename it either, of course.

  Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.

  What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away.  Once registered.  I click with the right button on the new file and rename the exact name as the file problem.  Don't forget to change the file extension (ex: .doc)

  ex file problem: word.doc

  new file: word.doc

  as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.

• Error: Windows could not find the username, when residential group folder sharing.

  Original title: Windows could not find the user name

  I use Window 7 Ultimate and have set up a homegroup. In Windows Explorer, I select a folder and choose share with. I have in the file sharing dialog box, select a user name (I checked that it is a valid user), and then click Add. I get the message "Windows could not find . I can't find a reference anywhere on the web for this problem. I'm the first one to see it?

  Hi David,

  For any question of shared folders in the homegroup, run the resolution of the problems of shared folders to automatically find and fix some common problems.

  Follow these steps to run the troubleshooter.

  a. Click Start, type troubleshooting and press ENTER.

  b. click on show all the link in the left panel.

  c. click on Shared Folders to run the troubleshooter.

  Also have a look if you have file sharing set up properly.

  For more information, you can consult the following articles.

  File sharing essentials

  Share files with anyone

• Can't delete shortcuts Office - 'could not find this item ".

  I have a few icons (including Acrobat) on the desktop wont Win 7 I would like to remove them - 'could not find this item.

  They are obviously still there and I tried to change the permissions, owvership, etc. all to nothing does not
  If I look at the level of the office via the Explorer Win, that the icons are not actually in the folder
  Where these icons are actually stored and is there a way to remove them

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works very well.

  Method 1

  You can run the fix of the article.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2

  Delete the file in safe mode and see if it works.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3

  If the problem persists, you can run the System File Checker.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 4

  Do us rebuild the cache of Windows 7 icon.
  a. stop Explorer (use for this task manager)
  b. Open command prompt. type cmd in the search box, click with the right button on the cmd.exe in the list and then click "Run as Administrator" and go to: %USERPROFILE%\AppData\Local
  c. view the IconCache.db file with the following command: attrib-h IconCache.db
  d. delete the IconCache.db file: del IconCache.db
  e. launch Explorer (or restart your computer).

   

• Cisco AnyConnect VPN Client 3.0 - could not load preferences

  Hello

  I have the problem that when I want to connect to the VPN (ASA 5510) with the AnyConnect Client 3.0 Gateway I get the error "Could not load preferences" when I try to connect via SSL of the SAA Portal, everthing works fine... I tried to reinstall the Client - without success... can someone tell me what is wrong with my client?

  THX

  Concerning

  Robert

  Hi Robert,.

  Follow these steps:

  -Allow a group alias or group-url for groups of tunnel.

  -Delete the profile XML of ASA (please export it all first to keep a backup).

  On the computer assigned:

  -Remove the Preferences.xml.

  -Remove the preferences_global.xml.

  -Delete the XML profile in the Profiles folder.

  Then reconnect the client.

  Let me know.

  Please rate this post if you find it useful.

• Setup could not find all of the products available for installation. Windows Update suggests to install 125KO Office 2007 SP1 repeatedly.

  Hello!
  Update for Windows Vista x 64 to Windows 7 x 64 caused the following errors:
  By clicking on the "Edit" button in "Programs and features" with Office 2007 trial selected gives an error "Setup error".
  Setup could not find all of the products available for installation. Please contact your systm administrator. "in Windows 7 x 64. Run the installation of Office 2007 trial version downloaded the file to change the components OK works.
  How to operate the button "Edit"?
  Windows Update suggests to install 125KO Office 2007 SP1 repeatedly. I agree to install each time, updates installs "successfully", but suggest Windows Update to install next time. It started to happen after uninstallation and reinstallation of Office 2007.
  Kind regards
  Dima

  125 KB is obviously not a ServicePack because this would be much MB in size, you have a number of KB (knowledge base) to go with the annoying update?

  How to use a Setup log file to troubleshoot installation in Office
  http://support.Microsoft.com/default.aspx/KB/826511

  How to read the Windowsupdate.log file
  http://support.Microsoft.com/kb/902093#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  As for the "Changes" problem that I have no real solution for this, only that you remove every bit of desktop of your machine and everything don't reinstall desktop applications you need.  It could be a corrupted registry which is behind this problem.