Could not find the specific insertion code

Similar Questions

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• I installed Windows 7 not genuine, I need to activate it, but I could not find the product key

  * Original title: product key

  I installed Windows 7 not genuine, I need to activate it, but I could not find the product key. Could someone guide me please.

  If you can't find the product key, you will need to buy a new one:

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

• "Could not find the main class" Java error on Windows 7, but not Windows XP

  Hi all

  It's the first app I try to package and virtualize with ThinApp.

  It is an old business application that usually runs on Windows XP SP3 x 86.

  The. MSI that I generated with Thinapp works very well when it is installed on a Windows XP SP3 x 86.

  However, our main goal to use Thinapp is to install on a Windows 7 SP1 x 64.

  But in doing so, the application triggers a Java Virtual Machine Launcher error message saying: "could not find the main class. Program will exit. »

  I thought that it was because the app includes a 1.4.2 JVM and that my XP has not any JVM pre-installed, but the main image on my W7 has a 1.7 JVM. But even after I uninstalled the 1.7 and installed JVM 1.4.2 on the W7 machine, I kept getting the error message so I guess that it is not bound.

  Y at - it an option that I missed during my MSI generation so that it can run on a Windows 7 x 64?

  Thank you all for your help.

  D.

  With the help of Lachi, we found that the app natively works on W7, no need for ThinApp it if the goal is just to make it work on W7, from a XP world.

  The only change we had to make (and the error was the same ThinApp-ed, which is what I originally shared) is that the application should work with Windows 7 in "classic" mode "of the screen (without Aero and the menu start XP-style). This is because the application runs an old integrated version of Java (1.4) and it makes the system calls seeking specific .dll to display, which are not accessible by default if Aero is enabled.

  Closed topic

• listener_scan1 could not find the name of service

  Hi all

  I installed 11203 on 2 node RAC cluster. I created 1 listener to scan. When I give lsnrctl status LISTENER_SCAN1, I get the below error

  AMT-01101: could not find the name of service LISTENER_SCAN1

  Please, give your suggestions and help on this issue.

  Thank you

  NR

  Hello

  Try configuring the tnsnames.ora in this format and let me know

  If you use load balancing, try

  TBESTDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1531))(HOST = node1_vip))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1531))(HOST = node2_vip))

  (LOAD_BALANCE = yes)

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = TBESTDB)

  )

  )

  And you can add below if you want to connect to a specific instance

  RAC1 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac1-vip)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac.oracle.com)

  (INSTANCE_NAME = rac1)

  )

  )

  RAC2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac2-vip)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac.oracle.com)

  (INSTANCE_NAME = rac2)

  )

  )

  Note: Replace the SID, Servicename, hostname, port etc depending on your environment and also ensure that the tnsnames.ora should be in an appropriate format (for example: the opening and closing should be in the right order.) If you add an extra space further it will throw error..)

  Kind regards

  Pradeep. V

• Could not find the ColdFusion component or interface

  I get an error 'Could not find the ColdFusion component or interface' when I try to call CF feed or http methods, for example:

  localtest.httpService = new http();

  Results in the error, 'Cold not find the ColdFusion component or interface http'

  I have two CF 9 instances that are running on the same machine (Windows Server 2008), both running the latest patch (patch 2). The two cases raise the same error. I have another separate server running CF 9 (does not have the hotfix 2 installed) and it can run code very well. I guess feed() and http() are defined in an Adobe ColdFusion cfc in the CFIDE directory somewhere, but I don't know which because they are encrypted.

  When you say "mapped" do you mean "with a CF mapping? If Yes, what is the mapping and where?

  On my install CF9, I've got a custom tag path defined, that points to the cfusion/customTags directory, which in turn contains the com/adobe/coldfusion dir, which is where the CFC is. It's the out-of-the-box config.

  Due to the track being defined custom tag, all files within this subdirectory structure can be treated without any other path, such as:

  new http()

  A mapping to CFIDE won't help you, because the files are not in the dir of CFIDE. And even then, say you had a map to cfusion/customtags called "/ foo", you would need the path access to the CFCS in your code:

  new foo.com.adobe.coldfusion.http)

  (or have an import statement that precedes the new statement)

  --

  Adam

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?

• Satellite L500 - could not find the SRS audio device

  At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

  Can someone tell how to fix this?

  Hello

  I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

  What do you think to update this driver? You can get it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• could not find the drivers for window7 32 bit 15-d018TU hp

  Dear Sir, I recently bought 15-d018TU with window 8.

  I installed 32 bit Windows 7.

  but I could not find the drivers for window7 32 bit.

  I need drivers now

  1 network cards

  Bluetooth 2 controller

  3 network controller

  4 PCI simple communication controller

  5 SM bus controller

  USB 6 bus controllers

  7 Ethernet controller

  Hello:

  You should be able to use all the W7 32-bit drivers and software from the HP Probook 450 G0 on your model, except the audio.

  Your model uses the Intel HD graphics driver.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4052%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• HP Pavilion 15-p031st: I could not find the drivers for Win7

  Hello!

  I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

  BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

  Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

  Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

  Greetings from the Turkey

  Hello:

  You need this driver for the 6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp67280.exe

• Just upgraded to Windows 7 Pro. Could not find the normal system games (solitaire, spider solitaire,... etc.). Where are they?

  I have just upgraded to Windows 7 Pro.  Could not find the normal system of games (Solitaire, solitaire spider, mine sweeper, etc.).  Where are they?

  Go to control panel > programs and features > turn Windows features on or off and place a check next to games and click OK. Carey Frisch

• When I open my browser Google Chrome I get error "could not find the translation file:...\pivot.ini [WPCTRL95] does not work.

  Hello

  I have the same problem. The error message appears when I open my browser Google Chrome (Yes, only that browser). The full message is: could not find the file:...\pivot.ini translation [WPCTRL95] will not run.
  What kind of changes? As far as I know, I did not bring changes of lipids to my computer or programs. The thing is that I for a moment, and I don't recall the exact moment when it appeared.

  Hello

  Please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Retrieving error - could not find the path of the image... M:/RecoveryImage/install.wim

  So, I went out and bought the USB on the gateway site to restore this laptop again and when I tried to do, he says recovery failed - could not find the path of the image M:/RecoveryImage/install.wim.

  I contacted support and they issued me a replacement USB drive, I get the same failure.

  I diagnosed the HARD drive and it passes.  I used diskpart to 'clean up' the disk drive HARD all nothing doesn't.

  [Under the direction of privacy] order number

  What gives?

  Acupro1,

  I you sent a PM with respect to research purposes.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.