could not find USB device & not print screen

Similar Questions

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• HP ENVY 4500: Error: the printer could not print

  After a saga of long hours to get my new 4500 DESIRE to produce a readable text, I finally have a wonderful clear text, but now realize a new problem: the printer stops at Midway through each second page and it spits out just with the white background.

  An error message appears briefly in windows that said "the printer could not print. If I click on it there is no more details. It seems that windows stops just sending information to the printer. My print spooler service is running and we are within 5 feet of the router with a strong bond. I did everything I can think of including updating the firmware and driver.

  Any ideas?

  Thanks for your suggestions! However, most did not address my problem. I ran the Print and Scan doctor before posting this thread, but it found no errors. I was unable to get any additional details about the error.

  SOLUTION: I found a solution after reading this thread. I've updated Windows 8.1 a few weeks since the last time I had the printer works. I've updated Windows again today and the problem immediately went away.

  Although I couldn't see everything concerning him spool printing or printer in the update drivers, it seems that the bug was caused by a Windows Update, and subsequently fixed by another update. I was able to print a 40 page document and several page 5 those without any problem, when before it was bad, making it through several pages before he died. Fixed!

• suddenly, I could not print because the computer cannot identify the printer

  Original title: printers

  I have windows XP Professional and a printer is connected to my PC, all of a sudden I could not print because the computer is unable to identify the printer. I unplugged the printer and plugged again and I turned off the computer, as I went to adding hardware but without success. could you please tell me how to restore the printer connection. In addition, the printer icon appears at all when I plug the printer cable

  Hello

  I suggest you run the difficulty mentioned in the link below:

  http://support.Microsoft.com/mats/printing_problems/en-us

  Alternatively, you can follow the steps mentioned in the link below to fix the issue:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this helps

• HP LaserJet M1132 MFP: HP M1132 multifunction printer could not print from TS Win2008 (Remote Desktop), is that M1132 is based on the host system

  The logged-on user OS Win7 64 bit with M1132 MFP (usb). We have TS server with Win2008 64-bit OS installed. User to connect TS and runing application, then try printing with printer M1132 redirected pages, but nothing happened.

  We found the article below that explain the system based on host could not use remote desktop. M1132 does not appear (he has provied the hots-based driver for the printer).

  http://h20565.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c00605333&lang=en&cc=us#N10078

  is there someone can let me know, this printer can be used for remote desktop or not? Thank you.

  Hello

  The HP Laserjet Pro M1132 is based on host printer indeed and consequences it only is not supported on Citrix / Terminal Services / RDP.

  You can find the specifications below:

  Standard printer languages: host-based

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA0-4644eee.PDF

  Also the following document list the LaserJet Pro M1130/M1210 MFP series ' ' as not supported include:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=4AA0-8465ENW

  Kind regards

  Shlomi

• HP DESKJET 2540: Could not print a thing even after test print

  Hello

  I'm looking for gurus who would help me on my printing problems.

  I had installed the drivers and run the HP Print & Scan Doctor 4 and it saids that my printer is perfectly fine.

  However, I am not able to print the page to test, or any other document.

  I hope someone could give me some advice on my current problem.

  Thank you

  Hi @Illusion_,

  I'd be happy to help you! I understand your description that you can not print test pages or documents but that the print and Scan doctor said that everything is fine.

  Although I don't know what the cause of printers to failure, I suspect that if restart us the spooler, remove the driver and re - add the printer that we may be able to correct the problem. Follow the instructions below to perform these tasks.

  Restart the print spooler

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the Run dialog box

  • Type services.msc and press enter
  • Locate the print spooler and double-click it to open the spooler properties
  • Make sure you that Startup type is set to automatic, if not please click the menu down and select automatic
  • Under Service status, please stop the server, wait a moment, and then click Start

  Remove the printer from the server to the printer properties

  1. open the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8 and 8.1 - Select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If you get an error "in use", restart the computer and the printer, and then follow the steps again.

  Re-add a printer

  Open start > all programs > HP folder > folder printer > HP Setup and the software if you do not see the installer and the software, but you see the printer icon, double-click the printer icon to start the installation and the software.

  Please let me know if that solves the problem by clicking on accept as a Solution. If the problem persists, please post back and include all the information you can like error message on the printer or the computer.

• Do not print screen capture

  I have windows 7 on a brand new computer and the print screen option does not work right it will capture the desktop and other programs that are being run behind a game, I try to get a perforated of Cap. I looked and could not find ideas for troubleshooting this ideas?

  Thank you

  Try Alt + PRTSCN.  Also focus on the modification of the AERO transparency.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Could not print anything else than the test page.

  With the help of Windows XP 64-bit Edition Pro with 8 GB of memory. I have two printers on network I'm having difficulties with printing

  I cannot print from any products of MS Office, adobe reader/acrobat or something else and could not also do the print list preferences. I am able to print the page of test of all printers with Notepad, Microsoft Paint, and Microsoft WordPad cannot print. Printers are setup correctly, because I uninstalled the drivers completely, downloaded the drivers from the manufacturer and install them also and always the same story.

  I get the following error messages when I try to print the following applications from each.

  Microsoft Word 2002 SP3
  
  When you click Help on the Web, need me http://support.microsoft.com/kb/q223420/ which does not help to solve my problem

  When you click OK, I get...
  
  and do not help either and clicking on the Cancel button I get...

  
  by clicking on the names proposed Web takes me http://support.microsoft.com/kb/q223418/ that does not help either

  by clicking on the OK button simply closes the dialog box.

  In Microsoft Excel, when I click on the button to print in the toolbar, I get the following error.

  
  When I click on help, excel printing troubleshooting opens on the side of Excel 2002 SP3, and it helps not at all.

  Clicking OK closes the dialog box.

  I'd appreciate any help, and I don't want to reinstall XP since it is pain and I want to solve it without making, since there are so many thing so install.

  I hope that all the information I have given will help you to give me any suggestions to solve the problem here.

  Thank you

  It turned out to be Preo Printelligence, that has been installed by the COMPUTER to track printing resources. After retiring, everything was back to normal.

  I hope it helps someone

• Could not print printer check to the XPS format

  I can't print anything from my computer even if I save it as an XPS. My default printer is my own personal computer at home and it also appears online on my computer but if I wrong turn, he says he is offline. Help please...

  Hello
  
  1. What is the brand and model of the printer?
  2 How long have you been faced with this problem?
  3. what exactly happens when you try to print? Do you get any error messages?
  4. were you able to use this printer as soon as possible?
   
  If you were able to print without any problems before then, run system restore.
  Reference: http://windows.microsoft.com/en-us/windows-vista/What-is-System-Restore
   
  1 restart the service or helped solve this issue.
  Designate rebooting to the service section of the following Microsoft article print spooler to restart the print spooler service:
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  
  2. check the cables to and from the printer to the computer and make sure that all connections are secure. A disconnected cable is often the cause of making the printer offline.
  3. turn off the printer and turn it back on. Sometimes, it might be just a glitch in the network. Reset the printer by turning it off then wait 60 seconds and turn it back on again.
   
  Similar problem: http://social.answers.microsoft.com/Forums/en-US/w7network/thread/2d895080-ebd7-493f-88f1-3a4fd9e833e4
   
  Print a test page
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page 

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Could not print black after installing new ink cartridge

  I installed the new black cartridge on my deskjet 3520. This is the original hp ink cartridge.

  also reinstalled the software of hp deskject.

  It shows even good condition here.

  but just no matter if I try to copy/printing, the printer started working and looks like it's actually printing, but after he gives me a blank page.

  

  Please can you me what should I do?

  

  Hi @Laviniania,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cannot print in black ink, you tried an alignment without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• Satellite L770 dosen't find USB devices

  Hello

  I just bought a new computer laptop satellite L770 OS windows7.
  I found some problem there, computer doesn't recognize/find/use of USB devices that are connected to the computer.
  I can find the devices in windows, but windows can not use those.

  I can 'remove' sefily of windows device and plug it in again and once more to use it.
  But the problem is that every time I turn on my computer, I have unplug the device and reconnect those, which is really frustrating.
  I tried to find some windows updates and latest drivers for USB or the motherboard.

  I found an update either of those. I wonder if there is hardware problem on my computer. I would be really gratefull for all the advice!

  Hello

  Don t think that his laptop hardware problem
  You should definitely test this with different USB device; Mouse USB, USB HDD, etc.
  I also recommend the settings the laptop configuration using disk HARD recovery option.
  This will outline the laptop in the same State as in the first day of purchase

  It might help to check if this is just something wrong with OS

• I submitted an application of couterfit software. could not print right here. where can I find my report

  For windows 7 ultimate I can't find my report, microsoft wants to print it out me and send it with the software. It is not in my e-mail address. You have any ideas?

  Thank you! Charlotte.

  Have you checked your spam folder?

  1-866-530-6364 is the number of direct telephone for WGA support order. They can look to the top of your order by number or your phone number and name

• Satellite Pro A300 can not find USB devices

  Hello forum,.

  We have a customer who bought a Toshiba Satellite Pro A300 with us, but he gets a strange mistake about it.
  It connects to a hub 5port Sandberg USB 2.0 to one of the usb ports, the pc detects the hub, but when it connects a /Memory stick to the hub, nothing happens.
  the hub and the memory stick works on other PCs.

  I hope someone can help.

  Best regards

  John Bork
  DANBIT A/S

  Hello

  What happens if you connect the memory stick directly without this USB hub?
  I also had a USB hub, but these hubs are a little complicated and delicate USB specification allows a certain power and according to the devices that connect, you need to use an active USB hub, that means with external power supply.

  But normally, Satellite Pro A300 should have enough USB ports if it of needed, I would recommend a USB hub with 2 or 3 maximum ports

• HP officejet 4630 could not print error message on screen

  I hope someone can help me,

  Whenever I try to print anything that is more than 1 page in my office or my laptop, the Officejet 4630 printer prints one page and then the part of the second and then I get a message that appears on my monitor saying

  "Printing on HP Officejet series 4630 error the printer couldn't print" and then it gives the name of file or address this point, that I am trying to print.

  I use windows 8 on top of the tower and XP on the desktop

  Thank you for your help in advance.

  ~ O ~

  Hello attaboye,

  Welcome to the HP Forums

  Seeing that you are using a Windows operating system on both computers, please run the HP print and Scan Doctor on each system. If the doctor fails, please let me know where she didn't have and error codes, it can generate.

  I look forward to hear from you.

  Thank you.

• Advantage of ink HP Deskjet 2520: could not print

  Hi, I would like to ask you a few questions is aboutj my printer. I bought this printer 2014 form.

  My printer now have a few problem is when I have my printer is connected to my laptop and power running, the power, media icon light and the light on the printer display will Flash.  and I check the guidelines that show the status light flashes is show that scan some problem and you need to restart the printer. Yes, after I restart the printer flashing icon is disappear, I try to print my staff of Mr. my printer connected to my laptop and I press print my documents, the document comes out and I m sure that I put the paper on the paper tray. I have to restart my printer but still cannot print paper. sometimek the printer will I spent 2 hours just to print a document.  also, you can not copy any document.

  This is my problem and I hope can be resolved as soon as possible.  Thank you very much.

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

   

   

  Hey @jiax,

  Welcome to the Forums of HP Support!

  I see that you have a problem with printing from your PC to 10 Windows for the Deskjet Ink Advantage all-in-one printer 2520. I can help you with that.

  First of all, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once this is done, try and make a copy of the front of the printer.

  If you are unable to make a copy:

  The printer is having a hardware problem. When the printer is on, remove the power cord at the back of the printer for one minute. If you are still unable to make a copy, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  If you are able to make a copy:

  1. If the printer is connected to your PC via a USB cable, remove it.
  2. Close all other programs that you have open.
  3. In your search type in printers bar and open devices and printers.
  4. Right click on all the icons in your printer listed.
  5. Click on remove the instrument.
  6. Repeat for any other copies of the printer listed.
  7. In your type of Services Research and open Component Services.
  8. On the left, click Services (Local).
  9. On the right, do a right-click on print spooler.
  10. Click on stop.
  11. Open your drive C:\, then Windows, System 32, coil, and printers.
  12. Delete everything in this folder.
  13. Return to the Component Services window.
  14. Right-click on print spooler.
  15. Click Start.

  Now, if you have disconnected the USB cable, plug it. Otherwise:

  1. Return to the printers and devices window.
  2. Click Add printer, and follow the prompts to add your printer to your computer.

  Please let me know the results of the rest of the foregoing. If you are able to print, click on accept solution. If you appreciate my help, please click it by clicking the thumbs up icon. The two icons are below this post.