Windows could not start during windows installation

Similar Questions

• Could not start during windows application reload

  I recently recharge experianced the following error message by finishing with Windows 7. I formatted the drive with Windows 7 x 64 disc and all files loaded without errors, after the reboot, I configure the user account, the time and all, then all by preparing the office, I got the following error:

  "The Application could not start properly (0 x 0000006). Click ok to close the application. »

  Hi Neo

  Thanks for your post in the Microsoft community

  The exception of code 0xc0000006 = STATUS_IN_PAGE_ERROR = data has not been placed in memory due to a State of error.

  I think you experience hardware failure - most likely the HARD drive or it could be RAM.

  First run chkdsk on your HARD drive.

  START | type cmd.exe in the start search box | Right-click on cmd.exe above under "programs". type the followng

  Chkdsk /r

  Then you will see something similar-

  Chkdsk cannot run because the volume is in use by another process.
  You want to schedule this volume to check next time
  the system restarts? (Y/N)

  Select there -, and then restart the computer. CHKDSK runs on the re-start.

  After working the chkdsk you try the sfc/scannow

• Windows could not start. request the installation disc

  Hi my laptop is coming with the "windows didn't start, insert the windows installation disk.

  Can anyone help? We don't have a Setup disk

  Hello

  Drive replacement hard is surprisingly simple and short on it's lower.

  Your computer is listed as coming with a 500 GB hard drive, but you can also easily install a 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

  Regarding the reinstallation of the operating system on the new HARD drive, there are two options - my personal preference would be the 2nd option wouldn't it because it does not any price.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a very respected source (Digital River).

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• Could not register during the installation of Flash Player

  Hello

  I'm having the following problem.  When you try to install the most recent 'Flash Player' I get the following on the 300 more my PC running Windows 7.

  

  I tried the steps for installed the cleaning and the steps to give permissions to the correct key in the registry and nothing worked.  I have attached the log files of the last machine, that I encountered the error.  Can someone please! I'm at my wits end on this.

  Shared files - Acrobat.com

  Thank you

  Roger Desilets

  Aqueduct of Charleston

  Post edited by: Roger Desilets

  For all those who may fall on this thread with a similar problem (and always get "Failed to register" error after you run the SubInACL tool to correct permissions):

  We have identified the problem as McAfee. Specifically, McAfee was preventing access to the following registry entries:

  HKLM Explorer\ActiveX Compatibility\ {D27CDB70-AE6D-11cf-96B8-444553540000} \Compatibility flags

  HKLM Software \Policy Rights\ElevationPolicy\ {FAF199D2-BFA7-4394-A4DE-044A08E59B32}

  HKLM Software \AppPath Rights\ElevationPolicy\ {FAF199D2-BFA7-4394-A4DE-044A08E59B32}

  HKLM Software \AppName Rights\ElevationPolicy\ {FAF199D2-BFA7-4394-A4DE-044A08E59B32}

  During uninstallation of McAfee, Flash Player ActiveX registered.  Could be a policy setting in the configuration of McAfee.  OP will investigate.

  --

  Maria

• Satellite L750 - could not start recovery image installation

  Hi guys,.

  I struggle to restore the original configuration (format) my toshiba satellite L750 push button power and zero (0) button together.

  I did factory restore before setting because there is a virus on my laptop. After format, all right. Now my laptop is infected with the virus once again, but I won't be able to format my laptop more. Whenever I press the power button / stop and zero button (0) I always hear a beep and won't stop until I press zero (0).
  I have before partition.

  My question is why I couldn't format my laptop more like how I use before (by pressing the power button / stop and zero button)?

  Can someone help me how to format my laptop the button works / stop and zero button does not?
  Thank you

  Hello

  If you have laptop model please follow the instructions described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
  You need to boot the laptop with F8 and choose the option to fix my computer.
  This option is available in advanced startup options?

• Windows error recovery. Windows could not start... _

  My Dell laptop I have from 10th July indicates the following:

  Windows error recovery

  Windows could not start.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

  Start the reboot system (recommended)

  Start Windows normally

  The two options to return to the same screen.

  I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

  I would be very grateful if you could help!

  Thank you

  Mark

  Hello mtb123,

  1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

  2. you remember what changes you made to the computer before you start this error?

  I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

  You can see the previous post of Srinivas R to verify the information on the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Qosmio G45-AV680 - Windows could not start

  My cousin has this laptop and could not start the system. It displays the message:

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you don't have this disk, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f

  "Info: the boot selection failed because a required device is not accessible.

  I tried to go into safe MODE, but it cannot do so. It starts to load the drivers, but it stops at some point and will not continue...
  The problem is that she did not have any DVD with laptop. I guess that the Vista operating system, that comes with it is the special partition on the hard drive, but how can I access it? How can I reinstall the system? I don't mind if I lose data, I used just to make it work...

  If DVD recovery is not assured that means installation of recovery can be started from the HARD drive. I don't know how it works exactly on cell phones in the United States. Try pressing zero button after starting upwards to see if HARD drive recovery option can be started.

  By the way: check the Toshiba U.S. support under http://laptopforums.toshiba.com/tshb/ forum
  Maybe someone there can explain how it works to start the installation of the OS on the HARD drive.

• Equium A300D - 16 c - Windows could not start

  I have a Toshiba Equium A300D - 16 c, and all of a sudden it turns on and goes on the windows boot and said Manager that Windows could not start and he won t let do me something else.
  I put really know what to do and all my United work is about it.

  It says to put the installation disc windows but it s does don't not to all drives what so ever.

  If anyone could help I'd be grateful
  Thank you

  You can start Windows in safe mode?

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• Windows could not start on Satellite L510

  HI :)

  I'm not very tech savvy, I've only had my laptop a month. And yesterday, when I turned it back on I got this message...

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem: Insert your windows installation disc, and then restart your computer
  If you do not have the disk, contact your manufacturer computer or system administration.

  file: \boot\bcd
  status: 0x000000f
  Info: an error occurred trying to read the boot configuration

  I have been all over these forums and the internet looking for a solution, but no luck. It's the weekend, so I can not communicate with the service line.
  I would appreciate a process step by step what it is, that I need to download or reset. I do not have the windows installation disc, because it did not come with my laptop.

  I really appreciate your help in advance ;)

  Hello

  Well, the error message says everything to me. Insert the Windows disk * or * contact manufacturing (Toshiba). ;)

  By the way: it would be interesting to know if you can boot into safe mode. Check it!
  If so, you may start the HARD drive recovery. Therefore, select Repair my computer in the Advanced Start menu and follow the instructions on the screen.

  Yes, with the laptop didn't come a disc, but you can create one!
  Please read the operating manual always first.

  Now it s too late to create such a floppy, but you can order directly into a new Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• Windows could not start. A recent hardware or software change might be the cause.

  I have a Toshiba M300 and it fails to start. Here's what he said.

  Windows could not start. A recent hardware or software change might be the cause.

  If the files in the window were damaged or configured incorectly, startup rapir can help diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Lanch Startup Repair

  Start window normally

  Well, I had two options... and nothing works. It gets stuck just on loading thingy, where it says MICROSOFT WINDOWS and keeps loading... I leave for 2 days and he continued make it... and it also won't let me restore my computer...!

  PLEASE HELP :(

  Hi Suzanna2001,

  Were present from recent changes to the system before the show, such as adding new hardware or software (including Windows Update).  You have access to a Windows CD/DVD?  Run the startup from the CD/DVD repair.  There is also an option to perform a restore of the system on the CD/DVD.  If no option is the problem, follow the steps below:

  1 1 demarrer start from the Windows 7 DVD, select your language and keyboard options, select repair your computer, and then select command line.

  2. from the command prompt, run the following command:
  DISM image:c:------/ Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
  Status: installed
  Output type: security update
  Install time: 02-11-2010 13:01

  3. find the most recent and then make a note of the identity of the package.

  4 run:

  DISM image:c:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)

  Until it is complete, you will get a status of the collection.

  5. restart your PC.

  You want to start with the most recent, and then remove them one at a time to find the problem update Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start. Status: 0xc000014c

  I had a Final message on my computer when I started my computer, instead of going to Windows, it will put in place then fanally this message.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  Status: 0xc000014c

  File: \Boot-BCD

  Status: 0xc000014c

  Info: An error occurred trying to read the boot configuration data.

  I did not "Windows installation disc", it needs to restart the computer.

  Where can I get this for my 'Windows Vista', because it is a very old from the beginning of 2007 version, please notify Dell INSPIRON 1501.

  Thank you

  Kind regards

  Imtiaz.

  Hello

  Note:

  Will need you the Windows Vista follow these steps. You can get in touch with the manufacturer in case you have Windows Vista preinstalled on the computer for using the Windows Vista DVD recovery system.

  Method 1:

  Do the Startup Repair.

  Reference:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  To solve the problem with the data (BCD) configuration of startup, you can check the link below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392