Could not test the application on the device in draft mode

Similar Questions

• How to activate bluetooth Qualcomm Atheros AR3012 on laptop Asus when "Windows could not activate the device (the function of bluetooth?

  airplance mode: off

  WiFi: connected.
  Bluetooth: off
  Ultrabook ASUS, bought on 14 April 2013
  Qualcomm-Atheros Bluetooth 4.0 AR3012 + HS
  Unable to activate the device.
  Basic troubleshooting done:
  1. reboot the PC
  2. activate and deactivate the airplance mode
  3. put updated driver
  Impossible to activate bluetooth
  error message: windows could not activate the device.
  tried steps 1-3 again me. same message showed.
  no other device is connected via USB when trying to enable bluetooth.
  known issue after removing antivirus software and install another antivirus software. but now I'm running on windows Defender.

  Hello

  Thank you for the update.

  As none of the above suggestions work, I suggest you to contact the Asus support for any future reference.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  Feel free to contact us for any other questions related to Windows.

• Could not load the device driver for DVD/CD-RW - Satellite 1110

  I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CD. It is reported as a CARPET * A UJDA730 DVD/CDRW but the device status is shown as:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to uninstall and reinstall the device, but the error just return. I can't find a driver to make it on the web site of the manufacturer or Toshiba. I don't want to use the product recovery CD because it means I'm losing all software and data on the hard drive.

  Can someone advise how to recover from this situation?

  Thank you

  Hello

  First of all you n t a driver for the CD/DVD drive. The drive uses the standard Windows OS driver and it s not necessary to install additional.
  I suppose that there could be something wrong with the registry entry.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843

  The user has used the statement that has been proposed on the site of Microsoft.
  This should help.

  Please post again if this method is successful.

• The startup message: could not find the device implementation of MOM

  At startup I get the implementation of MOM message device is not found

  Hello

  I suggest to try to start the computer in safe mode and check if you can start:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If not, then I suggest you try to do the Startup Repair and check if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Attempt to sync music error - could not get the device certificate - C00D11E3

  Original title: C00D11E3

  I tried to sync music from my laptop to my brand new Sony Walkman NWZ - B153 MP3 player, but I got was a full load of a red cross on the left side of the lines of track information.

  "When I left clicked on one of the crosses, he said," cannot get the certificate of the device "whatever that means, more the C00D11E3 error code.

  I got a Sony's MP3 player before and I could download music o problem. So, why the problem with this brand new?

  Garry

  Hi Garry,

  (1) how you try to synchronize?

  (2) using any software provided by the manufacturer of the device to synchronize?

  Since you were able to synchronize your old MP3 player (from the same manufacturer) on the same computer, there will be some settings in the new MP3 player.

  Cannot get the device certificate, can indicate that the device is locked by the manufacturer.

  You can check with Sony to known problems

  http://eSupport.Sony.com/

  You can download Windows Mobile Device Center and check, for more information please visit the links below

  Synchronize music, photos, contacts, and calendars with a mobile device

  http://Windows.Microsoft.com/en-us/Windows7/sync-music-pictures-contacts-and-calendars-with-a-mobile-device

  Download Windows Mobile Device Center 6.1

  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not load the device driver

  Hello, after upgrading to Windows 7 Ultimate, my drive stop working entirely. The description reads as follows: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. I downloaded updates and do not know if I have to uninstall or what... Please help

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Check if the drive works now.

  If the drive does not, in the Start Menu, open Control Panel and click Device Manager.  Click to open the IDE ATA/ATAPI controllers.  Right-click on the first channel and select uninstall.  Do not delete if requested drivers.  When uninstalled repeat the process for each channel.  Also, if an ATA controller is listed, right click and uninstall it, once again is not removing the drivers if requested. Then, open the CD-ROM/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.

  Restart the computer and let Windows reinstall devices.  Check the disc again.

  If it still does not work, re-run the fixit automated Microsoft at the link below.

  Windows 7

  Then, in the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Best wishes

  DP - K

• On Satellite A200 error message: could not open the ACPI ATK0100 Kernel Mode driver

  Hello

  I have laptop Satellite A200
  When I run the windows (vista) I get the following error: * 'Can t open ACPI ATK0100 Kernel Mode Driver.*'!
  I installed all the drivers and the error remains.
  I installed all the drivers on the Toshiba site, but the problem persists.
  The Device Manager shows me that each device is working properly.

  Someone at - it a solution?

  Thank you

  ACPI is the installation of your Windows operating system power management. If this fails you may need to run a recovery system on your computer. You can do this with the hidden partition on your hard drive, but this will erase all data on your machine. If this does not resolve the problem, you may consider making your hard drive, checked bad sectors, as this may have failed.

  I hope this helps. :)

• Could not find the device with uuid - ESXi 4 and 5 - Dell 2950

  Hello

  I am installing ESXi4 or 5 on a Dell 2950.  I'm not an expert material guy, but I think the controller is a Perc 5 controller hardware / i.  It is a processor of Intel Xeon dual core CPU 2.

  The link of compatibility:

  http://www.VMware.com/resources/compatibility/search.php

  I see only the processors Xeon 5xxx and above seem to be supported, and I honestly don't know if mine it fits or not but when I had installed CentOS and made ' less/proc/cpuinfo', no model number came, just that it was a Xeon processor.

  When I install ESXi on this server (I turned on hardware virtualization in the BIOS), the installation looks ok, but when the computer restarts, it always seems to try to load my old server CentOS so it's as if the installation has not completely replace the drive. Raid Controller had 2 virtual disks so maybe I didn't replace what was a disc of "boot"?  I will try that next.

  Guess I'm looking for confirmation that the CPU is ok and I'm missing nothing else.

  Thank you

  Charles

  1 in the raid bios remove the raid and create a new one, and then reinstall esxi.

  2 when you install also use iso Dell:

  do both and you should have a running system.

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-R620?driverId=XWYR5&osCode=XI51&FILEID=3005015335

  This is the link above

  I try to keep updated here: http://sparrowangelstechnology.blogspot.com/search?q=dell+iso

• BT tray could not start the device bluetooth stack service

  I have a computer hp Pavilion dv7 laptop and get on a dialog box pop up indicating "BT tray: error: unable to start bluetooth stack service". I seem to have no effect on my laptop but it is leaving the boring. Any ideas as to why this dialog box keeps on popping up?

  Windows 7?

  Try to update your bluetooth driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-81348-1&LC=en&DLC=en&cc=us&DocName=c01590950&swlinkmsg=300

  More troubleshooting information

  http://support.HP.com/us-en/document/c01590950

• Delete PassthroughDevice does not remove the devices in silent mode

  Hello

  Is there a way to remove from VM SCSI devices with the Remove-PassthroughDevice cmdlet without confirmation?

  Currently, I have tried with the following syntax:

  Get-PassthroughDevice - VM $vm | Delete-PassthroughDevice

  Which prompts for removal, but I want to remove them silently.

  BR,

  JJ

  Add the - confirm the setting.

  Like this

  Get-PassthroughDevice -VM $vm | Remove-PassthroughDevice -Confirm:$false
  

• Satellite L500 - could not find the SRS audio device

  At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

  Can someone tell how to fix this?

  Hello

  I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

  What do you think to update this driver? You can get it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.

• Satellite P100-160: could not get the proper functioning

  Hello

  I was wondering that if someone had had experience of this problem - the sound on my laptop did not work.
  However when I go into Control Panel, windows tells me that the card its conexant high definition smartaudio HD2 works.

  If I try to download the sound card again, an error message comes up saying "" driver installation failed: could not find the device of media for this driver. ""

  Strangely, the sound will then work fine.
  But the problem returns to the restart of the computer.

  Does anyone have advice or suggestions?

  Any help much appreciated.

  Hello

  The laptop supports the Conexant High Definition sound card and therefore the Conexant audio driver should work and can be installed.

  What operating system do you use?
  The operating system is up to date?
  Have you tried the Toshiba Recovery disk?
  Have you tried to reinstall the OS again to check if the OS is not confused upward?

• No HDMI Audio, could not play the test tone, cannot change the default playback device

  Hello, I have real trouble with my HP Pavilion dv6-2160us experience (with the i3 - 330 M, no dedicated graphics card) Windows 7-64 bit, SP1 PC and I would be happy to help.

  I created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what has worked for them, nothing has worked for me.

  The problem (s):

  My main problem is that I can not any audio to play from my PC to my HDTV HDMI.

  When I plug my HDMI cable on my PC and the TV, the TV is recognized in the playback devices, but nothing he can play.

  When I try to test the TV in playback devices, I get an error "could not play the test tone.

  In addition, I want to mention a few other odd behavior that I think can be a part of the main problem.

  In playback devices, I can't change anything. I can't disable or enable a device, I can not set as default playback or communication devices, and I can't save changes to the properties of the device. Whenever I try to change something, as the default playback device, nothing happens, or the changes are immediately reversed.

  The Question:

  How can I get audio to play through HDMI on my PC (is not a problem with the TV, my other machines HP audio playback over HDMI it is fine)?

  What I tried:

  I tried:

  • Change the default playback devices, which I am unable to do
  • The utilities of reading Audio de Windows 7 running in a clean boot state
  • Uninstall and reinstall the driver Intel(r) Audio display
  • Uninstallation and reinstallation of the IDT High Definition Audio CODEC
  • Uninstall the IDT Audio PC program under programs and features
  • Disable the IDT High Definition Audio CODEC

  Nothing has worked.

  The drivers I have are the latest issued by HP

  How can I get this to work? I would appreciate help.

  I'm at the point where I'm willing to try solutions quite technically involved, so feel free to post those.

  Your expertise is greatly appreciated.

  Thank you.

  OK, I finally have the answer for that.

  If you experience this problem even and you want to fix it, you'll need a PC running the same version of Windows 7 that your PC works lot of work but it works without problems, with regard to this point.

  Here's what I did to solve the problem:

  1. Create a system restore point.
  2. Run regedit.exe as administrator.
  3. Go to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices \Audio .
  4. Compare the permissions and attributes of ownership of this key and all subkeys to your work PC.
  5. Change all permissions and property attributes for interest on the defective PC keys as they are the same as those on the operation of the PC.
  6. Restart your faulty computer.

  I hope this helps. It worked for me.

• Vista/No Sound / could not play the test tone

  I recently upgraded to vista and found out that I have no sound. the driver (vista version) for my advice on sound card seems fine, but when I try to play a song in windows Media Player, I get a msg "Windows Media Player has encountered a problem reading the file. For any additional help, click Help on the Web. "and I also get a"Could not play the test tone"msg when I try to test my speakers. I thought it was because of vista dosent support my shit on board sound card, so I got a new.

  I just installed a Creative Audigy SE and downloaded the driver for windows vista. again, in the Device Manager, everything looks fine, the driver is end, the device works. but I still get the "Windows Media Player encountered a problem while playing the file. For additional assistance, click Web Help. "When I try to play a song, as well as the msg"cannot play the test tone"when I click on the Test button. Please help me, I'm tired of using a computer with no sound.

  the solution is at the end of this thread:

  http://forums.Microsoft.com/MSDN/ShowPost.aspx?PostID=2155198&SiteID=1

  Basically, vista is...

• Device error MMC Manager could not create the snap.

  original title: device error Manager
  When I open it it gives me an error, it says:
  MMC could not create the snap. The snap-in may not be installed correctly.
  Name: Device Manager
  CLSID: {74246bfc - 4 c 96 - 11 d 0-abef-0020af6b0b7b7a}
  any idea?
  Also its not let me solve whatever it is, it is said
  C;\windows\system32\msdt.exe is not a valid win32 application

  Hi Jenny.  Try to run the System File Checker.  Click Start and type cmd in the box "search programs and files". Cmd.exe will appear at the top of the Menu. Right-click on it and choose "Run as Administrator". Once the command prompt opens, type "sfc/scannow" without the quotes and press ENTER.  The System File Checker will start. It might take some time to complete so please be patient. Reboot when finished and let us know if this helped.
  MVP (Windows desktop experience)