CPU becomes very high - OS restart automatically - viruses?

Similar Questions

• Computer running slow / CPU shows very high %

  Why my laptop run very slow and lagging behind, the CPU show % very high and unstable at all without opening anything. and he delay my departure until the time of the computer.

  the malware scan, that I did it, it detected something, after that I deleted. but the problem still remains the same, sometimes difficult to cause me online also. really terrible. (I'm poor COMPUTER knowledge) ^^. Finally, I have format my computer and using window 7. Want to just thank you to you all who come to suggest me, teach me method to solve this kind of problem.

  and Andre.Ziegler, I n know what you mean. Don understand not at all. Haha, post you can not see. -Sry _-

• music of jump-cpu is very high while playing music and distorts

  during playback of cd or downloaded any music he distorts and jumps.cpu use is almost 100%

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2 when was the last time it was working fine?

  3. do you use windows media player to play music?

  4. What is the CPU usage is high will be downloading music or playing music?

  5. what kind of music you are trying to read?

  6. which Web site you are trying to download from?

  7 does work very well earlier, or did the changes on the computer?

  8. what player you use to play music?

  I suggest you to follow the steps below and check if it helps:

  Step 1: I suggest you to perform a clean boot and check if the problem still persist.

  Follow the steps mentioned in the article below.

  http://support.Microsoft.com/kb/316434

  Note:

  Once the troubleshooting completed, reset the computer to start as usual.

  More information: http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is useful.

• The CPU suddenly very high low host CPU

  Hi all

  I was struggling with a particular host for awhile and am unable to access the root of the cause. What we have so far:

  Physics:

  1 host, 2 quadcores with HT technology (total 8 cores, 16 logic due to HT), 24 GB of ram

  HP Proliant DL380 G6

  Virtual:

  1 x Windows 2008R2 DC/FS 2vcpu

  1 x Windows 2008R2 SQL 4vcpu

  1 x Windows 2008R2 Exchange 2010 1vcpu

  1 x Windows 2012R2 RDS currently 8vcpu

  Recently, the old 2008R2 RDS has been replaced by the new 2012R2 RDS. This went well, nothing special, no complaints, that rent because it was quite a bit of snappyier than the last.

  Then, (and I did not understand what happened yet, could have been power failure) after about a week the Esxi host froze and we had to restart. Servers began and everything was fine, until the problems started.

  The 2012R2 virtual machine currently maxing out at 100% cpu usage in Windows Task Manager, between all the virtual cores. This can be achieved by something as simple as the launch of chrome and Outlook at the same time. Performance on this virtual machine is terrible. All other virtual machines are affected also, extremely high CPU usage in Windows, maxing out even with simple tasks. If I open vSphere and check the CPU usage, it's nowhere near capacity. The RDS virtual machine did not exceed 3000 mhz maximum.

  What we have tried so far:

  -Reboot the host

  -Restart the virtual machine

  -The power management has changed compared to the High Performance HP OS Control setting, and the powersetting to high performance in vsphere. I can see through esxtop that all hearts are at c0 permanently. (Could not verify this before because of ILO2 failing to display this when HP high performance mode is activated)

  -J' tried all sorts of Vcpu assignments, until 1 vcpu/1core 8 sockets on the 2012RDS. There is no pool of resources, there is no reserves (I tried those who, unfortunately, no effect)

  -Close all VM except one (to check if there is some sort of contention cpu), always the same.

  I think something is gone belly up when the host rebooted, simply unable to understand why, and apart from the crazy CPU usage, the server running now stable.

  Any input is greatly appreciated.

  21:03:46 until 01:52, 344 worlds, 4 VMS, vCPUs 15; CPU load average: 0.19, 0.26, 0.22

  PCPU USED (%): 2.6 2.5 2.5 3.0 4.1 2.1 2.7 1.9 2.9 5.7 2.2 2.4 1.9 1.7 2.3 2.4 AVG: 2.7

  PCPU UTIL (%): 19 19 19 21 28 18 20 16 17 28 16 16 13 14 14 16 AVG: 19

  UTIL (%) BASE: 33 35 40 31 40 27 23 26 AVG: 32

  ID NAME NWLD % USED GID % PERFORMANCE SYS % WAITING % VMWAIT % % IDLE % OVRLP % % MLMTD % SWPWT CSTP RDY

  3785 3785 XXXXX 14 24.00 153,48 0.13 1243,64 11.57 2.75 633.36 0.81 0.00 0.00 0.00

  10167 10167 XXXX01 10 6.87 54,83 0.11 944,21 3.31 341.84 0.95 0.21 0.00 0.00 0.00

  3361 3361 XXXXX01 7 3.21 13.37 0.05 686,25 0.23 87.04 0.35 0.00 0.00 0.00 0.00

  3349 3349 XXXXe01 10 1.64 8,89 0.06 990,63 0.28 191.21 0.50 0.02 0.00 0.00 0.00

  This has been fixed!

  Have us shut completely the host, took off all power physically and reconnected. After that, CPU returned to normal. Upgrade to ESXi for good measure.

  Apparently restart with the ILO is not enough.

• If my active fiber path becomes unavailable the node restarts automatically

  Cluster of 2 nodes on Oracle Linux 6.2
  
  I have a 11.2.0.3 RAC installed to aid vote ASM disks and a disc ASM hosting a cluster database. I'm testing the failover for multipaths. I got disabling a path and check connectivity then reactivate using a Cisco Fabric manager. On some paths - I guess that's the active path, the server restarts almost immediately after you turn off the path (closure of the port). I have 8 paths for each LUN and Multipath - he's shows output such as:
  
  mpathf (26366623936333162) dm-15 WTSSR__B, INVICTA
  size = 2.1 features T = '0' hwhandler = '0' wp = rw
  | - + - political = "round-robin 0" prio is 1 table = active ".
  | ' - 1:0:0:7 homeless ready active 8:80 running
  | - + - political = "round-robin 0" prio is 1 table = on ".
  | ' - 1:0:1:7 DTS ready active 65:16 running
  | - + - political = "round-robin 0" prio is 1 table = on ".
  | ' - 1:0:2:7 hamza ready active 65:208 running
  | - + - political = "round-robin 0" prio is 1 table = on ".
  | ' - 1:0:3:7 sdap ready active 66:144 running
  | - + - political = "round-robin 0" prio is 1 table = on ".
  | ' - 2:0:0:7 FSCO ready active 67:80 running
  | - + - political = "round-robin 0" prio is 1 table = on ".
  | ' - 2:0:1:7 sdbn ready active 68:16 running
  | - + - political = "round-robin 0" prio is 1 table = on ".
  | ' - 2:0:2:7 sdbz ready active 68:208 running
  ' - + - political = "round-robin 0" prio is 1 table = on ".
  ' - 2:0:3:7 sdcl ready active 69:144 running
  
  When I created the asm disks, I fell: oracleasm createdisk BIGDISK/dev/dm-15
  I don't know if that's a problem, but the database works well as it is the cluster.
  
  Another thing - it starts from SAN and when I installed it found the multipath device and installed very well to the LUN (two nodes). I had to edit the /etc/multipath.conf and comment options the blacklist before multipath - he's would show all paths. However I do nothing else with this file. I noticed in some of my reading that maybe I should have a wwid followed by a unique iSCSI identifier in the file multipath.conf, but since multipath - he's showing all of these paths I didn't manually multichannel updates in the config file.
  
  I am not mistaken, no sure what if I have something misconfigured as the multipath.conf information is needed more path, or if there is a configuration setting to prevent reboot nodes too quickly if a path is removed?
  
  Published by: GeorgeHorlacher on February 5, 2013 15:59

  ASMLib, if you use it, cannot manage to see the same disk twice. You may need to exclude scanning ASM order devices to make sure to use the multipath device and not the real disk.

  Setting up Oracle ASMLib on multichannel discs
  www.Oracle.com/technetwork/topics/Linux/Multipath-097959.html

  Regardless of ASMLib, if you have separate disks on separate controller trails, you can check for each path of the controller in a separate group of ASM failure and does not implement different controller failure groups who use paths.

• 12.1.3 regeneration of forms taking very high CPU and time

  I've recently updated 12.1.2 to 12.1.3 (+ RPC4) and a month of back 10.2.0.5 to 11.2.0.4 (+ CPP) on Solaris 10 64-bit with 2 nodes Applin and separate DB Node with 16cpu and 64 GB of ram with sufficient swap and @12 Go of LMSS.  While patches to upgrade and then the CPU is very high continuous - idle 0 UC 99.2 on DB Server user and, even if the workers are taken as 16 instead of 32 - default.

  More than 18 hours are taken and still only 1,500 jobs are completed and 2000 + remaining. With the help of adadmin with options for all products.

  Appreciate your help to accelerate this process.

  There is little improvement with your solution, but below the solution was really helpful: Oracle Applications DBA: Compilation of form against a 11g, database crashes or takes a very long time [880660.1 ID]

  Thank you

• Switching frequency of newspaper is very high

  Oracle 10g
  Sun Solaris
  
  I came across a situation where the newspaper switching frequency becomes very high for a couple of daily hours and then returns to normal.
  
  The increase in frequency occurs for about 6 to 8 hours daily. Then he is back to normal.
  
  
  It's a situation where we have to change the size of the recovery log?

  newlg1 wrote:
  Define 'normal '. Set 'top '.

  Just in the last hour, the log file switch happened on average 5 minutes.

  Not bad. For me the 'high' is a minute or less. For me 'normal' is 15-30 minutes.

  I tend to change the size of the usual load will cause a switch just about 15 minutes. Then, I'll use ARCHIVE_LAG_TARGET to keep roughly 30 minutes for no charge. You might have other values.

  There is also a checkpoint not complete messages in the alert log, but it was on
  On 18 April. I don't see that today.

  If the checkpoint is not complete is a regular show, try adding several groups of newspapers.

  However, both the size of the log and journal County should not be affected if you do not actually experience a problem. Still, what you describe is a symptom, not a problem in itself.

  >

  It is a RAC database. This log switch occurs in only one instance. But not the other.

  This is because the only case to charge more than others.

  If the load must be balanced, check your listeners and your TNS customer configurations. It is not uncommon set lots of hit one and a single node, which can be tuned. Yet once, controlled by network settings.

  Note that sizes of newspapers do not need to match each instance. Sizes are set according to the load expected on each node.

• Very high speed of CPU!

  Last two days, I have experienced a few problems. When my computer is turned on, the gets (98-100%) very high CPU speed and after a few minutes my computer hangs and then I have to turn off in strength. I'm not an expert on this issue, so I would appreciate your help.

  Here are the specifications of comp.:

  Windows Vista Edition Home Premium Copyright 2007 Service Pack 2

  Hewlett-Packard-Compaq Presario A900 Notebook PC

  Class 3.1

  Processor Intel (r) Pentium (r) Dual CPU T2370 1.73 GHz 1.73GHz

  2.00 GB RAM

  SystemType 32-bit

  .. and what are the process when I open the Task Manager:

  Sidebar.exe, Opera.exe, taskmgr.exe, dwm.exe explorer.exe, SndVol.exe, ehmsas.exe, ApMsgFwd.exe, NMBgMonitor.exe, ehtray.exe, HpqToaster.exe, iTunesHelper.exe, avgtray.exe, igfxsrvc.exe, SearchSettings.exe, jusched.exe, HPWAMain.exe, hpwuSchd2.exe, MSASCui.exe, QLBCTRL.exe, QPService.exe, IAAnotif.exe, Apoint.exe, igfxpers.exe, hkcmd.exe, igfxtray.exe, WiFiMsg.exe, Apoint.exe, unsecapp.exe, ApntEx.exe, winlogon.exe, NMIndexStoreSvr.exe, csrss.exe

  I tried to run scans with AVG, but my computer froze during the scan, so I couldn't finish it.

  Thanks for help.

  Hello

  Use this utility to see if you can work on the causes. Work in Mode safe when necessary.
  repeatedly press F8 that you start.

  ----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems). You are using AVG which could have a role in the problem.

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cursor becomes very small on W550S with a display high resolution (2880 x 1620)

  I have a W550S with a disply 2880 x 1620 running Windows 10. Once logged in, after a few minutes, the mouse pointer becomes very small, about 1/2 the size of the regular cursor. I use 200% scaling (recommended for high resolution viewing). I can restore the normal size pointer by selecting under the mouse settings, but finally it switches back on about 1/2 size.

  It seems that Windows 'forget' that she runs at 200% scale and turns again to the normal scale of 100% of IPR.

  Does anyone else have this problem? It is a problem because when she becomes so tiny I can't often found on the screen.

  Oh and I sometimes run with an external monitor-normal DPI connected to the laptop. I think the problem started when I plugged the external monitor, but it happens even if I do not have the external monitor connected.

  Thanks in advance,

  -Steven

  All the...

  Please see the recent Synaptics update package:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-W-series-laptops/ThinkPad-W55...

  Version 19.0.17.27

  • (Fix) Removal of the option of size of button for touchpad.
  
  
  • (Fix) Fixed a problem where the cursor of the mouse become small after used average trackpoing scrolling.
  
  
  • (Fix) Fixed a user interface text size is not properly aligned.

  Kind regards.

• Very high CPU usage in svchost during playback of an event in a major newspaper of the events using WMI

  Hello

  I have a very high utilization of the processor in the process 'svchost.exe LocalServiceNetworkRestricted' during playback of an event in an event log in Windows 2008 64 SP02 using local or remote WMI.  The same happens using Wbemtest or C++ WMI code.  The use of WbemTest, "Open forum" (identical to one the GetObject of WMI API) read just one of recent events in the event log:

  Win32_NTLogEvent.logfile = "application", recordNumber = 2615657 (in this case, it was the id since the last event in the very large to the Application event log)

  takes 3/4 seconds consuming thant plus 50% of the monitored computer CPU.  This only occurs when the event log is very large (in my case 1 million records), the event log contains about 10000 events just fine.

  The problem is that I read the complete paper in a remote program and this product CPU usage charge too much CPU to the monitored computer.  I do not read the newspaper of the events one by one, but I'm using WQL queries but I do some GetObjects and the peformance is really terrible.

  Any idea what to change or search?

  Best regards

  Jordi

  Hi jordil,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  TechNet Windows Server general Forum

• TimesTen 11 g - direct connection jdbc get very high CPU usage

  Hi guys,.
  
  When I run my application with a direct connection, I get very high CPU usage... Can help me where can I fix this.
  This is the configuration I have.
  
  PermSize = 102400
  TempSize = 2457
  
  More, should one I include the LogBufferSize? How much should I put in it?
  
  
  Thank you
  
  John

  Well, the point to keep in mind is that overall CPU utilization will not higher with direct mode with a local server. In fact, it will be a little weaker because of the much higher efficientcy of direct mode compared to client/server mode.

  The usual rules apply here; You must decide on the maximum use of your machine (normally one trying to limit it to)<=60% for="" the="" most="" optimal="">

  Then you need to see how your workload uses the CPU. with TimesTen there is no blocking operation within the database for a single application thread can, if it does not crash on all external events such as queue of messages, etc. I/O, usually consume a whole CPU core (a large volume of work in the process of transformation). If he asks you to this nature then you want to limit the number of concurrent threads to the smallest reasonable number. Assuming that the machine is running just the application and TimesTen and nothing else and that you wish to leave a carrot free for activity of DB o/s and the background (for example, journal of hot flashes and checkponting) then optimal throughput and response time will be reached with three concurrent threads hitting the database. You can run course with wires more than that but the flow will not be increased (in fact it will decrease somehwat due claim etc.) and response times will certainly increase. For this application profile you certainly wouldn't want to use more than 8 simultaneous maximum son.

  At the other extreme is an application that has multiple concurrent threads, but where each thread spends much of its time waiting for some work to do and runs only makes for a short period of work process then returns to the wait. You can use several more concurrent threads than the hearts of processors for this application profiel. The optimal number will be determined by the specific workload, load CPU it generates and your maximum target of use of the system.

  None of this is really specific TimesTen. The main differences that TimesTen brings all this are:

  1. the workload of database now works on the same machine as the application rather than on a server separate from the DB so that it consumes resources on the application computer.

  2. in general, database interactions will result not in any idle time from a point of view CPU usage (as a consequence of (1) above).

  Ideally, your request will be designed and implemented so that the number of concurrent threads can be controlled as a parameter tunbable to allow you to adjust the workload generated by the application to the specific environment in which it runs.

  Chris

• CPU usage is very high, some time it goes to 100% usage and requiring traffic time hung off the coast.

  I asked S/W AirFASE control of flight data on Windows 2008 Server (HP Proliant ML350 server machine). When I run the Replay, its running slow flight, if I keep running Flt. Replay system will hang. Even with MS Excel & Word response in the process is to slow down. When I check the system via the Task Manager, process name "the system idle process' CPU usage is high (like 60%). Please notify.

  Hello Salim,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• Satellite A45 - the CPU usage is high and slow applications

  Hi all

  I'm trying to debug a hardware problem on my Toshiba Satellite A45. I am running Ubuntu 10.04, but I don't think that it's operating system or related software.

  THE PROBLEM: The CPU usage is high and applications slowly to a crawl after using an intensive application of memory for a few minutes, i.e. to watch a video or a game. Basically, anything that could use the screen much. If instead, I work only from a prompt, even when the application could do a lot of work, I do not encounter this problem. After stopping all applications, the CPU usage is always higher than normal (90% idle, should normally be slowed down to about 99%).

  Xorg now typically showing about 6% (normally use< 2%).="" if="" i="" at="" any="" time="" after="" this="" try="" to="" work="" in="" any="" application,="" usage="" is="" still="" bogged="" down.="" only="" a="" reset="" gets="" me="" back="" to="">

  Note: My system has always worked very well and I did not made the installation of the software or changes when it started to happen.
  However, the laptop is a 800 miles round trip at the rear of the car in a padded bag.

  DEBUG: This doesn't seem to be the RAM that I replaced the RAM and reinstall the RAM, and the problem persists. This doesn't seem to be the hard drive that I can try to run it from a Live CD (without use of HARD drive) and yet everything slows to a crawl.

  HELP: I don't know how to debug from here.
  I don't have extra pieces of hardware to make swaps.

  Any ideas more how to debug this?

  Thank you
  Grommit

  Hello

  > I am running Ubuntu 10.04, but I don't think that it's operating system or related software.
  It s interesting why you think that this may be software related issue

  I think that it is a typical software problem because the RAM and the HARD drive has been verified you have reported this in the message

  So what to say maybe some virus or malware likely to obstruct the CPU and the memory usage
  Or there is some process in the background that are not properly

  I recommend you to reinstall the Windows operating system or another distribution of Linux that runs NO Live CD, but which is installed on the HARD drive
  I m sure that s kind of the process that is disabled and crashes somewhere in the background

• Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  Hello world. Since I installed Windows 7 Home Premium, I had problems with an error message displayed when I start my computer. The error message said, as in the title, "Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now. ». After a minute, the computer is forced to restart, it closed suddenly, without any message "Shutdown of Windows". The problem occurs very often, I want to say that it appears whenever I start my computer. I don't know what to do, it's really annoying.

  I found a microsoft forum, when someone posted an article (http://support.microsoft.com/kb/976586/) when it was said something to the topic 'how to activate her do not require account Kerberos preauthentication option", but I did not understand how to do this. If anyone can help me, please do it, each response is welcome. (Sorry my bad English, I'm still student - Romanian).

  Hi again! I managed t solve the problem myself, using Kaspersky Rescue CD 10. This is the Win32/Trojan.Shutdowner virus and rootkit causes this error. I think this is the solution to all of you who have this problem. Download and burn to a CD from the ISO image of kav rescue of http://rescuedisk.kaspersky-labs.com/rescuedisk/updatable/kav_rescue_10.iso. Make a start of full system scan from the disc that you created. Remove infections all found, including this stupid annoying rootkit, and you're done! At least it worked for me! Thanks again to all who have tried to help me!

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices &amp; their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892