Switching frequency of newspaper is very high

Similar Questions

• SG200 - 26 [FW - 1.1.2.0]-very high response time: > 1000 ms!

  Hello

  Problem: New SG - 200 26 Smart Switch with the latest Firmware - very high response time 500-800 ms

  We have a router of EdgeMarc 4500 with 10 VPN tunnels at 10 locations of brach. SG-200 26 Smart Switch is connected to 7 servers (Terminal 2, SQL and others), all locations have 50 MB download and download 20 MB of Verizon FiOS Internet service speed.

  Depending on the tool Kulvik, the response time of this switch is around 500ms. At the same time, the response time of the EdgeMarc 4500 router is around 40ms and less.

  We have 60 remote desktop computers connected to our SQL Server database and 40 users of RDP via Remote Desktop. The configuration is the same for 3 years. But we change the switch HP 1800 - 24G of Cisco because of some failures of connection. For connection failures, we first think the old switch from HP, but it looks like problem with router EdgeMarc.

  This response time is normal? I have attached two screenshots of Switch Cisco and response time for the past 24 hours EdgeMarc router according to the tool Kulvik. Any other advice would be greatly appreciated. Thank you.

  Hello Srinath,

  Thank you for your participation in the community of support to small businesses. My name is Nico Muselle of Cisco Sofia HWC.

  The response time of the switch can be considered quite normal. Reason for this is that the switch gives CPU priority to its actual tasks that would be sure to pass, lists of access, VLANs, QoS, multicast, and DHCP snooping etc etc. As a result, the switch itself ping response time does not show in any way the good operation of the switch.

  I invite to try the rattling customers connected to the switch, you should be able to notice that the response time to customers are much lower than the response time of the switch itself.

  I hope that answers your question!

  Best regards

  Nico glacier

  Senior Network Engineer - CCNA - CCNA security

• Very high CPU usage in svchost during playback of an event in a major newspaper of the events using WMI

  Hello

  I have a very high utilization of the processor in the process 'svchost.exe LocalServiceNetworkRestricted' during playback of an event in an event log in Windows 2008 64 SP02 using local or remote WMI.  The same happens using Wbemtest or C++ WMI code.  The use of WbemTest, "Open forum" (identical to one the GetObject of WMI API) read just one of recent events in the event log:

  Win32_NTLogEvent.logfile = "application", recordNumber = 2615657 (in this case, it was the id since the last event in the very large to the Application event log)

  takes 3/4 seconds consuming thant plus 50% of the monitored computer CPU.  This only occurs when the event log is very large (in my case 1 million records), the event log contains about 10000 events just fine.

  The problem is that I read the complete paper in a remote program and this product CPU usage charge too much CPU to the monitored computer.  I do not read the newspaper of the events one by one, but I'm using WQL queries but I do some GetObjects and the peformance is really terrible.

  Any idea what to change or search?

  Best regards

  Jordi

  Hi jordil,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  TechNet Windows Server general Forum

• CPU becomes very high - OS restart automatically - viruses?

  for 3 months, I have a problem with my cpu...
  the use of the cpu suddenly become very high and that's when I have access to the internet...
  the computer is just after this release out of control and the operating system automatically restarts from scratch, why is this?

  Hi Ryad,

  This behavior soiunds looks a lot like the Sasser worm that causes very heavy use of the CPU and causes also the PC restart regularly.

  You need start your computer in safe mode, and then run your antivirus software (I would also like to run your Malware software as well) to try to remove the virus. However, Sasser is not so easy to remove so please also consult the following URL: -.
  http://securityresponse.Symantec.com/avcenter/venc/data/W32.Sasser.removal.tool.html

  Kind regards

• Satellite A660-167 - audio latency very high indeed

  Hello guys.

  I have a Toshiba A660-167 and I'm having a problem with the audio latency, it is actually very high.
  I am using Windows 7 Home premium 64-bit and I already tried using windows 7 32-bit and windows Xp but the problem remains.

  Toshiba already tried to "fix" my problem, but as they said that my laptop works perfectly.
  If someone knows something about the latency problem that his help will be very appreciated...

  Thanks in advance

  Hi dj_betty,

  And how did you notice this problem of DPC latency?
  You have a problem with noise or speakers as low volume or what?

  I must say that my Satellite A660 runs great. I often listen to music with headphones or speakers in-house and have no problem at all. Music and video will be read correctly.

• Qosmio F30-140: Vista stopped and I heard a very high noise

  Hello everyone

  Really, I have a big problem
  My operating system is Windows XP media center 2005 and it is written above (Designed for windows xp, Windows Vista capable)

  2 last week I had installed windows Vista ultimate 32 bit and pilots of the Qosmio, but after 2 days when I worked in Microsoft office Word, the system stopped and I heard a very high noise of it (maybe the processor or fans) but he was really scared and immediately, I turned it of the power button.

  This problem occurred 4 times through this time. I had installed windows xp again from the recovery disk and there is no problem and I installed Windows Vista again hard night but today in the morning the same problem again.

  I don't really know how to fix this and I look forward to receiving help from you.

  Hello

  It s certainly nothing wrong with the firmware Toshiba VAP this nothing to do with your question, you issue sounds more like an overheating problem the OS freezes at a temperature inside the laptop.

  Probably don t cooling modules run a full implementation because of the dust and debris inside the laptop.

  The second reason why a laptop could overheat is the graphics driver installed _non-Toshiba_!

• My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

  Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

• Utilization ratio of page showing very high in Task Manager and computer file crashes

  Original title: the utilization ratio file page showing very high in the Task Manager and the system is to be hanged, please help!

  Hello

  as I mentioned in the title line that we our office gives problem that it begin to become hunged and at this time, when I open the Task Manager to check the status of performance using Page file shows very high up to 1.5 GB.

  Please suggest!

  Thank you

  Brahmaprakash Mishra

  If the swap file itself grows in fact you may suspect a leak memory by an application, it is called a leak 'Paged', usually, notice increased use of pagefile with an increasing slowness of the machine.  As the demand for 'leaks' or consumes more memory Windows pages pages of the RAM in the swap file, where the name, 'Paged' leaking, leaks memory in the paging file.

  The Task Manager is not a very good job of giving you the 'real' swap file usage, to get use accurate, you can analyze the file with the corresponding Perfmon counter or you
  can use PageFileMon from Doug Knox utility: http://www.dougknox.com/xp/utils/xp_pagefilemon.htm

  Open your task manager and click on the view menu and click Select columns...  Put a check mark on the columns paged and Thread Count.  Keep an eye on these columns over a period of time, showing a constantly growing number likely suspicious process Thread.

  You can monitor these counters with Perfmon, that might be useful:
  Using performance monitor to identify a pool leak

  John

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Very high speed of CPU!

  Last two days, I have experienced a few problems. When my computer is turned on, the gets (98-100%) very high CPU speed and after a few minutes my computer hangs and then I have to turn off in strength. I'm not an expert on this issue, so I would appreciate your help.

  Here are the specifications of comp.:

  Windows Vista Edition Home Premium Copyright 2007 Service Pack 2

  Hewlett-Packard-Compaq Presario A900 Notebook PC

  Class 3.1

  Processor Intel (r) Pentium (r) Dual CPU T2370 1.73 GHz 1.73GHz

  2.00 GB RAM

  SystemType 32-bit

  .. and what are the process when I open the Task Manager:

  Sidebar.exe, Opera.exe, taskmgr.exe, dwm.exe explorer.exe, SndVol.exe, ehmsas.exe, ApMsgFwd.exe, NMBgMonitor.exe, ehtray.exe, HpqToaster.exe, iTunesHelper.exe, avgtray.exe, igfxsrvc.exe, SearchSettings.exe, jusched.exe, HPWAMain.exe, hpwuSchd2.exe, MSASCui.exe, QLBCTRL.exe, QPService.exe, IAAnotif.exe, Apoint.exe, igfxpers.exe, hkcmd.exe, igfxtray.exe, WiFiMsg.exe, Apoint.exe, unsecapp.exe, ApntEx.exe, winlogon.exe, NMIndexStoreSvr.exe, csrss.exe

  I tried to run scans with AVG, but my computer froze during the scan, so I couldn't finish it.

  Thanks for help.

  Hello

  Use this utility to see if you can work on the causes. Work in Mode safe when necessary.
  repeatedly press F8 that you start.

  ----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems). You are using AVG which could have a role in the problem.

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer running slow / CPU shows very high %

  Why my laptop run very slow and lagging behind, the CPU show % very high and unstable at all without opening anything. and he delay my departure until the time of the computer.

  the malware scan, that I did it, it detected something, after that I deleted. but the problem still remains the same, sometimes difficult to cause me online also. really terrible. (I'm poor COMPUTER knowledge) ^^. Finally, I have format my computer and using window 7. Want to just thank you to you all who come to suggest me, teach me method to solve this kind of problem.

  and Andre.Ziegler, I n know what you mean. Don understand not at all. Haha, post you can not see. -Sry _-

• file has a very high number of fragmentation

  Original title: C:\WINDOWS\TEMP\98c7210f-43e-40a3-b8aa-72af27623eb5

  This file presents a very high number of fragmentation. It shows that when I requested a search in WINDOWS\TEMP. Can I delete this file?

  Yes, you can delete files in C:\Windows\Temp without damaging the system (if permitted by the access system and delete).  It can affect other things do you use this file or the folder, but if you do nothing else then there should be no problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My ping in counter-strike 1.6 is very high how low that it down

  Hi.I need help I play counter-strike 1.6 and I need help my ping when I play is very high and I want to ping difficulty in game.please anserws me.any help is useful

  What we are talking about here? LAN or internet.
  You have four servers, or you can access four servers?
  If you have access to four servers in how far they are from you and you have
  a good modem, and your internet connection meet the criteria I mentioned in the previous post?
  You can check your internet speed and ping on the site below--

  Speedtest.NET - the Global speed Test

  If you are running four servers CS I think he would have to do with your servers themselves, or even the internet / LAN connection parameters.
  There are better forums that deal with the subject of execution of game servers.
  I never ran a server game so if you can not get any help from the
  Forum "Hardware and drivers", then you will probably need to do some serching
  on the i-net for sites that specialize in this topic.

• 12.1.3 regeneration of forms taking very high CPU and time

  I've recently updated 12.1.2 to 12.1.3 (+ RPC4) and a month of back 10.2.0.5 to 11.2.0.4 (+ CPP) on Solaris 10 64-bit with 2 nodes Applin and separate DB Node with 16cpu and 64 GB of ram with sufficient swap and @12 Go of LMSS.  While patches to upgrade and then the CPU is very high continuous - idle 0 UC 99.2 on DB Server user and, even if the workers are taken as 16 instead of 32 - default.

  More than 18 hours are taken and still only 1,500 jobs are completed and 2000 + remaining. With the help of adadmin with options for all products.

  Appreciate your help to accelerate this process.

  There is little improvement with your solution, but below the solution was really helpful: Oracle Applications DBA: Compilation of form against a 11g, database crashes or takes a very long time [880660.1 ID]

  Thank you

• Adobe is really sitting very high on their horse (imaginary?): their software system and phone MAZE makes it (almost)?) Impossible to disable a CS6 on a computer crashed, so I can re - install my product PAID again! Any help in sight?

  Adobe is really sitting very high on their horse (imaginary?): their software system and phone MAZE makes it (almost)?) Impossible to disable a CS6 on a computer crashed, so I can re - install my product PAID again! Any help in sight? @

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations