CPU usage is very high, some time it goes to 100% usage and requiring traffic time hung off the coast.

Similar Questions

• I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

  I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

  original title: MICROSOFT SECURITY ESSENTIALS AND MALWAREBYTES ARE OK, YES or NO

  I had my computer checked by professionals and they added Malwarebytes, my MSE keeps turning the real-time protection off the coast of almost every day and take 2 or more going to turn around.

  There are 2 types of Malewarebytes:

  A free edition
  An edition of Malewarebytes Pro you have to buy.

  Ask thos 'pro' that is they added to your computer.
  Let them also disable the protection in real time of the Malwarebytes.

  I have MSE as my time protection rel and Malwarebytes (free version) as my program "we demand."
  Ways to request that is not run until I turn it on, and it stops when finished scanning.

• Windows 7 has high CPU usage and slow performance. Tried all the tips. no solution

  After trying tons of advice in the forums without solution, I downloaded Process Explorer and discovered that 3 process is look after my CPU and slow down the computer:
  System 48-52%
  Interrupts the 21-23%
  System idle process 14-16%
  What should I do next?

  After trying tons of advice in the forums without solution, I downloaded Process Explorer and discovered that 3 process is look after my CPU and slow down the computer:
  System 48-52%
  Interrupts the 21-23%
  System idle process 14-16%
  What should I do next?

  Yes you can do you can disable these 3 processes which is occupy you cpu and you can check that performance in safe mode too
  http://www.technology-HOWTO.com/2011/07/disable-programs-that-run-when-we-start.html

• SG200 - 26 [FW - 1.1.2.0]-very high response time: > 1000 ms!

  Hello

  Problem: New SG - 200 26 Smart Switch with the latest Firmware - very high response time 500-800 ms

  We have a router of EdgeMarc 4500 with 10 VPN tunnels at 10 locations of brach. SG-200 26 Smart Switch is connected to 7 servers (Terminal 2, SQL and others), all locations have 50 MB download and download 20 MB of Verizon FiOS Internet service speed.

  Depending on the tool Kulvik, the response time of this switch is around 500ms. At the same time, the response time of the EdgeMarc 4500 router is around 40ms and less.

  We have 60 remote desktop computers connected to our SQL Server database and 40 users of RDP via Remote Desktop. The configuration is the same for 3 years. But we change the switch HP 1800 - 24G of Cisco because of some failures of connection. For connection failures, we first think the old switch from HP, but it looks like problem with router EdgeMarc.

  This response time is normal? I have attached two screenshots of Switch Cisco and response time for the past 24 hours EdgeMarc router according to the tool Kulvik. Any other advice would be greatly appreciated. Thank you.

  Hello Srinath,

  Thank you for your participation in the community of support to small businesses. My name is Nico Muselle of Cisco Sofia HWC.

  The response time of the switch can be considered quite normal. Reason for this is that the switch gives CPU priority to its actual tasks that would be sure to pass, lists of access, VLANs, QoS, multicast, and DHCP snooping etc etc. As a result, the switch itself ping response time does not show in any way the good operation of the switch.

  I invite to try the rattling customers connected to the switch, you should be able to notice that the response time to customers are much lower than the response time of the switch itself.

  I hope that answers your question!

  Best regards

  Nico glacier

  Senior Network Engineer - CCNA - CCNA security

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why did FireFox flash black and then cause a huge CPU usage and crash?

  I don't know if this has been asked before, but on Windows 7, FireFox will cause a high CPU usage and the black flash and then crash. No idea why? Acceleration is disabled for the options and flash.

  Would help if we could read your Crash reports.

  Please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID that begins with a bp - then go back to your forum question and paste the ID into the box of "Post a reply".

  Note: If a recent report ID does not begin with bp - click it to present the report.

  (Please do not take a screenshot of your plant, just copy and paste the ID.) The image below is just an example of what your Firefox screen should look like).

  

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• OlioWeb VM consumes 99% CPU usage and get errors webload olio.

  Hello

  I have 3 ESXi servers in cluster and a separate Esxi server for virtual computers customer. I have 2 tiles set in my configuration.

  I lit only tile0 of Esxi server1 and ran the vmmark test. I got the result in the form of complaint with scores generated.

  Same way lit only tile1 of ESXi server2 and ran the vmmark test. I got the result in the form of complaint with scores generated.

  Now, I tried to run the tile 2 tile 0 energized the server 1 and tile1 energized server2.

  I found olioweb vm of two tiles consuming 99.9% CPU usage and result shows a lot of olioweb the failure of the workload. I observed ESXi server consumes 70% only the use of the processor in both servers.

  I would understand if its cpu leads to failures of olioweb? Also find out if hit the threshold of CPU?

  Is there something wrong with my vms olioweb?

  When I run tiles tiling oly 0 or tile1, I see oiliweb VM consumes 45% CPU utilization.

  Verifed below things after mentioning other discussions with similar errors.

  -> VMware tools installed in the virtual machines.

  -> 10 G network adapter is installed on all servers and network synergy is less than 30% in the vmmark test.

  --> All are same server with the same configuration of CPU. DELL PE R820.

  Attached the vmmark newspapers and olioweb vm performance monitor screenshot.

  Any help is greatly appreciated.

  Thank you

  Suresh

  When you say you checked the space on OlioWeb and OlioDB VMs, have you done this before or after the race?  For verification, please make a "df-h" on all 4 virtual machines before and after the race.

  In addition, it seems that you have set up the hosts file incorrectly:

  OlioWeb0_hosts.txt:192.168.7.4	Olio-db
  OlioWeb0_hosts.txt:192.168.7.14	Olio-DB
  OlioWeb1_hosts.txt:192.168.7.4	Olio-db
  OlioWeb1_hosts.txt:192.168.7.14	Olio-DB

  Only, there should be one entry per host for olio-db file.  Try to change that and we will collect a cleaner race.

• I am a webmaster for a non-profit, 501 c 3 organization. I managed to get a (educational) license non-profit for Acrobat Pro XI, some time ago, but the PC has spent since then, taking his information with her, unfortunately. Can I restore Acrobat?

  I am a webmaster for a non-profit, 501 c 3 organization. I managed to get a (educational) license non-profit for Acrobat Pro XI, some time ago, but the PC has spent since then, taking his information with her, unfortunately. How can I restore Acrobat Pro XI on my new PC?

  I am also interested in getting some kind of equivalent license for standalone applications (not CC), or something similar to your previous suites of e-learning. My company (Gilbert & Sullivan Light Opera Company of Long Island) cannot afford to pay the monthly fee for cc licenses and prefer something I can download and use on my PC.

  There are two addresses of email related to my account: [email protected] and [email protected] .

  I hope I can get support or useful information on this subject.

  Thanks in advance,

  Andrew Schwartz

  Webmaster, Gilbert & Sullivan Light Opera Company of Long Island

  Hi Andy,.

  Please see the following documentation for non-profit organizations:

  http://www.Adobe.com/mena_en/education/nonprofit-eligibility-Guide.html

  Non-profit organizations

  Kind regards

  Rave

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• The processor high/weird CPU usage and about 20 to 25% system interruptions.

  Hello

  I use an AMD phemon IIx4 965 processor. (never had proplems with this till now.) One of its mainstays bed use ranging from 70-99% in Task Manager exercising while the other 3 are normally working / reading normal numbers. The question comes at random, but won't go away unless I restart my computer. This problem arises in a week a go, I was playing a game in steam when I noticed the drastic performance to fall and began studying. The question, something just when im not playing. I use my computer mainly on the game. The computer slows down because of this. I have no idea what the cause. Help?

  Procexp said interruptions system 20-25. According to CPU - Z and CrystaldistInfo my HARD drive temperatures are all normal, around 28 - 38 c idle.

  Reasently, I got a new case for my computer parts, I removed and passed my components of my old case to a new. I tried to be careful and I know (I know) thinki. enough computers to do this by myself. Fifi, it done once in the past. I have read the instructions and put / connected all the wires and parts according to them. The machine started normally. No problems. This could cause this problem, is a thread in the wrong place? I do not know.

  I used free versions of Windows security essentials and Spybot search and destroy, Avast kernel tdsskiller to search for viruses and malware. All this happened in own. Can he still be a virus or something?
  Used more claire Wise registry and Ccleaner but noting alarming is come to the top, (again I think.) some things Yes, but breaking the ' fix claim has pursuant button has not set a cpu problem.

  First I though its my GPU causing the problem drivers. (google said) Approximately 45 days only a go replace my old AMD for a new R280 AMD Radeon 6950. Allworked very well so far. I found that according to Unknown Device Identifier I had older drivers still on my machine. I had trouble removing the old drivers, but eventually I had to use an uninstall program display driver for getting rid of them and now I only see one set of drivers. This has not fixed the issue of the use of the cpu.

  IM lost, at the end of my skills (mainly google-fu). Can someone help me? I hope this is the right place for this post, if it isn't then I apologize.

  If you want me (hopefully) post set and whatknot please first tell what program for and where to find it.

  Card mother 790GX-G65 (MS-7576)
  CPU AMD phenom II X 4 965
  AMD Radeon R280X 3 GB DDR5 XFX video card
  BenQ E2420HD 24 "1920 x 1080 resolution 75 Hz LCD monitor
  8 GB RAM DDR3
  Series of smart Power Supply Thermaltake M85OW EU

  I've updated all the drivers on the site of manufacturers on my motherboard side touching the BIOS and embedded PIDE/SATA drivers. Updated my drivers for Audio embedded, embedded LAN Drivers, System & Chipset drivers. (smarter people said that could set).

  Until writing this no problem has arisen, all works fine now. Procexp said system interruptions are now less then 2, compared to the previous 20-25 it is a sign that the update to fix the problem. It seems that this problem corrected everything. It turns out that all i needed was updated drivers thees. Everything works fine now... for the moment at least. Live and learn.

  Thanks for the time and effort you took to look for it.

• My laptop is often spiking to 100% CPU usage and always > 10%, with a physical memory to 25% + even though I have no programs running

  Recently, I reformatted the drive, reinstalled Windows and have no personal data on this subject. The only application there is office, which I am not, using McAffee and my browser:-I use it mainly for web browsing.

  It seems to happen mostly when I was using the browser, then left the machine for a few hours, then come back and tried to use it again. I turned off the screen saver and specify power options to keep permannently because she seems to be that the question was restartinjg rest. When the CPU usage is at its peak, and I try to return to the browser (or whatever it is) it may take some minutes to answer - just to load the Control Panel, for example.

  I can see from the Manager tasks, which is currently running, but ideas on how to identify the process that all take this resource, I can stop safely and therefore to save resources?

  Processes are:-

  CSRSS
  DWM
  Explorer
  mcagent
  MSASCui
  rundl32
  Sidebar
  taskeng
  Taskmgr
  Winlogon

  Also a lot of services - too many to list!

  All the processes you list, apart from mcagent, which is McAfee, are essential components of Windows. If you finish one of them outside the sidebar of your computer stops working to a greater or lesser degree. You could try gadgets on sidebar of closing in case one of them is wrong to behave.

  Another thing that can cause the CPU to boost with no application running is Windows Update and probably analysis and updates from McAfee.

  Don't you have the CPU column shows in the Task Manager, so that you can see which process is using most of the CPU? What processor is it? What is a heart?

  A better tool than the Manager of the tasks for these circumstances is Process Explorer.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  Process Explorer is a chart of the CPU where you can put the mouse on a cob and it will tell you what process is using most of the CPU.

  There is an introduction to Process Explorer here.

  http://Channel9.msdn.com/events/TechEd/NorthAmerica/2010/WCL314

  As for the memory of 25%, 25% of what? Computer laptop 2 GB I write this on shows 42% of physical memory used with any running application. It's Windows. It's big enough.

  In your situation, one thing I would try would be to uninstall McAfee (run the removal tool then http://service.mcafee.com/FAQDocument.aspx?id=TS100507) and install Microsoft Security Essentials.

• Recently FireFox often caused 100% CPU usage and locks until it finishes the process (the different). Clear the cookies/cache did not help. Any ideas?

  Windows 2000 SP4, 1 g RAM, Firefox version 9.0.1
  We keep IE6 and Firefox open simultaneously to 2 different email accounts. Firefox has always been much faster even with 3 or 4 tabs open, but for the past few weeks trying to update a screen suddenly CPU goes to 100% usage and of course nothing will move until the process is complete. Close one or more tabs does not help. If I close Firefox completely using the task processor Manager goes back down to zero. After restarting Firefox CPU use may or may not go back to the top as he tries to continue the previous task which has been lock him up.
  He did this with Firefox 3.6, but still it did not happen immediately after the 9.0.1 update either.

  Hi vbolton,

  Have you looked at the Knowledge Base article Firefox using too much memory (RAM) - how to fix the or Firefox using too many resources CPU - how to fix? There is a lot of information in there.

  Hope this helps!

• Why my always 100% CPU usage and what is RegSvcs.exe uses 50% of it?

  Hi people,

  I think I need urgent help though.

  Recently, I thought I downloaded malware that is injected with the Trojan horse. And now, I believe that the Trojan horse lies in my computer. I did this because my CPU usage is always at 100% even when I just restarted my com. Initially, I found there was a program called dgen.exe running in my computer to a 60% of CPU usage. Never so, I remove the dgen.exe from my computer but I don't know if I remove it entirely. Now, I'll have another program called RegSvcs.exe in my computer operating at 50 percent CPU usage. I googled out and it says it may or may not be required by windows and it could be a trojan virus as well. That's why there at - it anyone who can enlighten me on this?

  I have to delete or to update or something?

  Thank you.

  Kind regards.

  PHMEC

  By far, this is related to the Malwarebytes with steam being far behind.  Your Cpu & your HD and combination of slow down the computer.

  I would remove MBAM at least to test

  

• Server time and time local (Dreamweaver) off the coast of 1 hour

  How can I get Dreamweaver to show me the correct timestamp on my files on the server and my local computer? When I telnet on my server, the time stamp on the files is correct. My server time is correctly set to He (GMT-5). My local computer time is set correctly. I asked my sysadmin if PureFTP has all zone settings and sysadmin told me that all my server time and time zones are specific. My sysadmin says that Drwamweaver is the culprit.

  I lived with this for a long time, but it is extremely annoying and I would like to address.

  I searched high and low in the option settings in Dreamweaver for a sort of zone setting or offset - found nothing.

  Someone knows a problem of out-of-sync of 1 hour between real time stamp file on the server and what Dreamweaver it shows in the display of remote/Local files?

  Thank you.

  During the hour.

  http://forums.Adobe.com/message/3545349#3545349

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB