CPU E5649 and E5440 compatibility

Similar Questions

• Why did FireFox flash black and then cause a huge CPU usage and crash?

  I don't know if this has been asked before, but on Windows 7, FireFox will cause a high CPU usage and the black flash and then crash. No idea why? Acceleration is disabled for the options and flash.

  Would help if we could read your Crash reports.

  Please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID that begins with a bp - then go back to your forum question and paste the ID into the box of "Post a reply".

  Note: If a recent report ID does not begin with bp - click it to present the report.

  (Please do not take a screenshot of your plant, just copy and paste the ID.) The image below is just an example of what your Firefox screen should look like).

  

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .

• Satellite A210 - 16G - problem of CPU frequency and memory

  Hey guys,.

  I had a problem with my laptop I can't solve, since I installed windows 7 RTM x 64 version.
  I noticed something is wrong after finding that my Windows experience index has fallen to 2.7 instead of 4.5, I used to have on Vista. For those who do not know my characteristics are:
  AMD Turion 64 X 2 TL-60, which I've got 2.7 of note, 4 GB Kingston DDR2-667 (333 MHz) - 4.4, scores of charts and hard drives are the same.

  I read in one of the forums that it may be a problem with the standby power options, but he did not get any option that says on the frequency of the processor changing according to the plan of the power. I also installed new version 2.0 of the website of Toshiba BIOS, but it only makes things worse: I've got 6.0 rating graphics of games but the Perf of Aero desktop is now 1.0!

  I installed diagnostic software: Everest and CPU - Z and I discovered that my CPU works with a frequency of 800 Mhz (the multiplier is 4 x, voltage 0.8V) and my DRAM frequency is 159.8 Mhz (I don't know if it's ok, but I know that 4.4 score is certainly too low although).

  So tell me guys, is this a problem of the operating system? Should I try to install the 32-bit version of Windows 7, or it won't change anything? Maybe I should try some software that would change the frequency of my FSB?
  I'm waiting for your answers, because I don't know what to do.

  Paul

  Aero needs a WDDM compatible graphics driver, then try to update the graphics driver on the Toshiba site

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• LabVIEW and TestStand compatibility chart

  Hello

  There are various compatibility tables LabVIEW NOR as this Web site but it seems not to be a LabVIEW and TestStand compatibility chart.

  I think I found my answers, but I had to get through all the Notes version of TestStand to get.

  Hi Ray,

  The lists of the political of TestStand page on the different version of TestStand compatibility with:

  • Operating systems
  • LabVIEW
  • LabWindows/CVI

  (In addition to information about the cycle of life and support policy)

  Specifically, here's a screenshot of LabVIEW support:

  

  With each new version of TestStand, we will update the policy life cycle page, so you can always go for information.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The processor high/weird CPU usage and about 20 to 25% system interruptions.

  Hello

  I use an AMD phemon IIx4 965 processor. (never had proplems with this till now.) One of its mainstays bed use ranging from 70-99% in Task Manager exercising while the other 3 are normally working / reading normal numbers. The question comes at random, but won't go away unless I restart my computer. This problem arises in a week a go, I was playing a game in steam when I noticed the drastic performance to fall and began studying. The question, something just when im not playing. I use my computer mainly on the game. The computer slows down because of this. I have no idea what the cause. Help?

  Procexp said interruptions system 20-25. According to CPU - Z and CrystaldistInfo my HARD drive temperatures are all normal, around 28 - 38 c idle.

  Reasently, I got a new case for my computer parts, I removed and passed my components of my old case to a new. I tried to be careful and I know (I know) thinki. enough computers to do this by myself. Fifi, it done once in the past. I have read the instructions and put / connected all the wires and parts according to them. The machine started normally. No problems. This could cause this problem, is a thread in the wrong place? I do not know.

  I used free versions of Windows security essentials and Spybot search and destroy, Avast kernel tdsskiller to search for viruses and malware. All this happened in own. Can he still be a virus or something?
  Used more claire Wise registry and Ccleaner but noting alarming is come to the top, (again I think.) some things Yes, but breaking the ' fix claim has pursuant button has not set a cpu problem.

  First I though its my GPU causing the problem drivers. (google said) Approximately 45 days only a go replace my old AMD for a new R280 AMD Radeon 6950. Allworked very well so far. I found that according to Unknown Device Identifier I had older drivers still on my machine. I had trouble removing the old drivers, but eventually I had to use an uninstall program display driver for getting rid of them and now I only see one set of drivers. This has not fixed the issue of the use of the cpu.

  IM lost, at the end of my skills (mainly google-fu). Can someone help me? I hope this is the right place for this post, if it isn't then I apologize.

  If you want me (hopefully) post set and whatknot please first tell what program for and where to find it.

  Card mother 790GX-G65 (MS-7576)
  CPU AMD phenom II X 4 965
  AMD Radeon R280X 3 GB DDR5 XFX video card
  BenQ E2420HD 24 "1920 x 1080 resolution 75 Hz LCD monitor
  8 GB RAM DDR3
  Series of smart Power Supply Thermaltake M85OW EU

  I've updated all the drivers on the site of manufacturers on my motherboard side touching the BIOS and embedded PIDE/SATA drivers. Updated my drivers for Audio embedded, embedded LAN Drivers, System & Chipset drivers. (smarter people said that could set).

  Until writing this no problem has arisen, all works fine now. Procexp said system interruptions are now less then 2, compared to the previous 20-25 it is a sign that the update to fix the problem. It seems that this problem corrected everything. It turns out that all i needed was updated drivers thees. Everything works fine now... for the moment at least. Live and learn.

  Thanks for the time and effort you took to look for it.

• Microsoft enhanced Point and print compatibility driver printer driver is not installed on this computer

  We are running Windows 7 Enterprise 64-bit (using VMware View 6.1) virtual work stations and the connection of users to a printer Xerox 4 Type driver/file being hosted on a Windows R2 server in 2012. The driver on the server is listed as "Xerox WorkCentre 7970 V4 PCL6" and when the user of Windows 7 connects the driver appears as "Microsoft enhanced driver compatibility point and print. In the "Print Management" client Win7, it appears as the 6.3.9600.17415 version

  The Printer works fine during their Windows session, they disconnect you and when they connect in the print queue is still there but when you right click and go to "Printer properties", he throws the following error

  "The printer driver ' improved point and print compatibility Microsoft driver" is not installed on this computer. " Some printer properties will be unavailable, unless you install the printer driver. You want to install the driver now? »

  Deleting the queue and then add it again resolves the problem for Windows session, you're.

  Note: we use Persona management of VMware to save data from the user profile of the disconnections from the virtual offices are non-persistent. I've been able to reproduce this in Windows 7 using a virtual office, I can't reproduce it on my physical Windows 7 machine.

  We get around this by using Group Policy and a vbs script to delete the queue on logoff, then another script to add back on logon, but it's just a band-aid.

  In addition, a Type 3 driver works fine in all of disconnections but we need the Type 4 driver in this case.

  Hello Brian,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• I need to upgrade the CPU, motherboard and RAM in my machine. Which will impact my Activation of Windows genuine?

  I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?

  original title: can I put my machine after GWA?

  It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.

• Can I change CPU, RAM AND graphics in HP Commpac D220?

  Hello! Thanks to the time to read this topic, I have a question on my hp compac D220 pc so I hope you will tell me the answer!
  IM runing windows 7 now and try to install windows 8.1 but IE NX unsupported. So I decided to change my processor and the extra ram of 1 GB ad, and the new graphics card but I don't know that the graphics card & CPU (last) support my pc.
  Here is my pc in detail.
  1.80 ghz, 180 GB HARD drive and 1 GB of ram, motherboard AMIBOIS, Windows 7 running. So suggest
  me that I buy a new pc or
  change cpu, ram and graphics card.

  Hello

  As it is an OEM machine, you will not be able to replace the CPU this processor is specifically compatible with OEM motherboard. If you are looking to change the CPU, RAM and GPU, you really can both do you a favor and buy a new machine all together, or build your own.

  Kind regards

  Patrick

• 100% high CPU load and memory usage

  Hi all

  My company bought a new appliance IPS 4510 and after initial installation, I see that the CPU load and memory is 100%. The device is not in a production network. Is this normal or there is a hardware problem? Enjoy a Counselor about it.

  Concerning

  Christine

  Hi Damien,.

  It is actually normal behavior for an IPS sensor.

  To measure the actual load of an IPS sensor, you will want to monitor the "percentage load treatment" of the analytical engine that processes all inspection processing for the sensor.

  You can view these statistics by using the command 'display the scan statistics-engine '.

  Also, the sensor running version 7.0000 E4 5,0000 E4 (or later version), you can check the load percentage value Inspection displayed by the command "Display inspection-load" in its place.

  Hope that answers your query.

  Cyril Shankar

• How to monitor my cpu heat and other items on my desktop HP Pavilion p6210f

  How to monitor my cpu heat and other items on my desktop HP Pavilion p6210f

  Lawrence123456,

  The applications are numerous, but I use:

  http://www.cpuid.com/downloads/HWMonitor/1.19-Setup.exe

  http://www.cpuid.com/downloads/CPU-z/1.60.1-Setup-en.exe

  http://www.cpuid.com/downloads/PC-Wizard/2012.2.0-Setup.exe

• OlioWeb VM consumes 99% CPU usage and get errors webload olio.

  Hello

  I have 3 ESXi servers in cluster and a separate Esxi server for virtual computers customer. I have 2 tiles set in my configuration.

  I lit only tile0 of Esxi server1 and ran the vmmark test. I got the result in the form of complaint with scores generated.

  Same way lit only tile1 of ESXi server2 and ran the vmmark test. I got the result in the form of complaint with scores generated.

  Now, I tried to run the tile 2 tile 0 energized the server 1 and tile1 energized server2.

  I found olioweb vm of two tiles consuming 99.9% CPU usage and result shows a lot of olioweb the failure of the workload. I observed ESXi server consumes 70% only the use of the processor in both servers.

  I would understand if its cpu leads to failures of olioweb? Also find out if hit the threshold of CPU?

  Is there something wrong with my vms olioweb?

  When I run tiles tiling oly 0 or tile1, I see oiliweb VM consumes 45% CPU utilization.

  Verifed below things after mentioning other discussions with similar errors.

  -> VMware tools installed in the virtual machines.

  -> 10 G network adapter is installed on all servers and network synergy is less than 30% in the vmmark test.

  --> All are same server with the same configuration of CPU. DELL PE R820.

  Attached the vmmark newspapers and olioweb vm performance monitor screenshot.

  Any help is greatly appreciated.

  Thank you

  Suresh

  When you say you checked the space on OlioWeb and OlioDB VMs, have you done this before or after the race?  For verification, please make a "df-h" on all 4 virtual machines before and after the race.

  In addition, it seems that you have set up the hosts file incorrectly:

  OlioWeb0_hosts.txt:192.168.7.4	Olio-db
  OlioWeb0_hosts.txt:192.168.7.14	Olio-DB
  OlioWeb1_hosts.txt:192.168.7.4	Olio-db
  OlioWeb1_hosts.txt:192.168.7.14	Olio-DB

  Only, there should be one entry per host for olio-db file.  Try to change that and we will collect a cleaner race.