CPU goes 100 after streaming video

Similar Questions

• I can't find the fix_svchost.bat file update. The svchost.exe process is spiking the CPU at 100% after the computer crashes.

  Original title: I can't find the fix_svchost.bat file update.

  I'm in you process of having my computer running faster. The svchost.exe process takes 100% of cpu memory and computer dthe freezes. A friend of mine told me a method to solve the problem, but I can't find the fix_svchost.bat update. I went to microsoft update center and don't find any results at all, and I don't know another place to look for. I think that the update does not even exist.

  I could send you a fix_svchost.bat file, but I don't think it's the starting point.

  What you need to do is run a few respectable scans for malware first, and then see if any of you are your svchost.exe process is still badly behave.

  Behind each of the svchost.exe process that see you in the Manager of tasks can be one or more process of XP you have to be running, but malware is KNOWN to imitate or hide behind a svchost.exe process, so you won't be able to see in Manager tasks.  You have to outsmart it.

  First yo should make a reasonable effort to eliminate malware, and then start troubleshooting - not the other way around.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

• my laptop CPU going 100% why is it so?

  my laptop is lagging when I browse and shows a 100% CPU usage

  I have a 3 GB ram nd, a processor core i3 FST generation
  Please let me why is know there a production so much heat and developmental delay and display 100% cpu usage

  Hello

  Please check the the Task Manager, on the processes tab, col CPU to see who did it, then post back.

  

  Kind regards.

• CPU goes to 100% svchost State takes all the resources on the Qosmio F10

  CPU goes to 100% svchost State takes all the resources. Norton can not find any illegal software. Have tried to list the processes (run... etc.). I get a long list, don't know what to do about this. Anyone out there have some help?

  Hey Buddy

  The same problem here. :( A universal solution is unknown to me but what I do is from the Task Manager. When svchost shows more than 90% of its use I simply stop this stupid process. After having done that, I can use my laptop without any problem and it will not happen again.

  After restarting the laptop, the same thing happens again. I checked some other forums but never found no reasonable explanation how manage this stupid question.

  If someone knows more please let us know.

• CPU on nearly 100% after the last update of Adobe CC

  CPU on my MBP runs to nearly 100% after the upgrade to the latest version of Adobe CC. autonomy down and MBP heats massively... CCXProcess killed in the Task Manager, but recharge automatically. Very annoying...

  I would advice you Contact Customer Care as a troubleshooting technique may be necessary.

• After awhile java.exe is the CPU at 100%

  Hello!

  I have a problem with the java.exe in the environment in which I work. In the environment, I have a physical server: Sun Fire X 4100 Server with 2 processors and 16 GB of RAM for control of virtualization. On the system, this is the Microsoft Windows Server 2008 R2 Datacenter and vCenter 5.5.

  For the most part, we are 5 guys in the team who use the vSphere Web GUI. We are connecting to the server using RDP and after some time, we can not connect because the CPU is at 100%. It takes 20-30 minutes to be able to connect. And then 5-10 minutes to be able to click on something. For example, to kill the java.exe file keeps the CPU at 100%. This isn't a good idea because afterwords the Web GUI does not work so we need to restart the server.

  Anyone of you have any idea why this is happening?

  Bogdan

  Sorry! I can't see the part about it being the physical server... which version of VC is this?

  A few resources that might help:

  VMware KB: VMware vCenter Server resource use is 100% and no longer

  http://Brian-Kayser.blogspot.in/2013/04/VMware-VirtualCenter-Server-high-memory.html

  Concerning

  Girish

• After reinstalling Windows Vista, have problems with buffering of streaming video

  I have a problem with streaming video in buffer where it was not before. I recently did a clean reinstall of my OS and since then I had problems with the streaming videos buffering during their race, where he has not before. I tried to disable my firewall and had the same results, is there some download/driver I need to install/reinstall that will fix this. I have a connection high speed that shouldn't be a problem... .without me know what you think, thanks, Stan

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Try to update the network map and display card drivers and check.
   
  It will be useful.
   
  Best regards, Niranjan | Microsoft Answers Support Engineer

• Portege R100 - CPU usage 100%

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to start records search engine, when I update the list of wireless networks and I explore the files by clicking on 'My computer', (this does not happen when I right click on START and 'Explore') displays CPU usage 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  It has nothing to do with your computer - this is the trident driver problem - there is a work - around
  Try changing your display configuration-

  (1) right click on your mouse to the desktop to bring up the display property, and then click Advanced - here, you will see a tab say somethng like 'graphic acceleration.
  (2) reduce the rate of acceleration - move the tab to the left - make sure it is not full
  (3) this trident driver can cause the BONE to redraw the screen whenever you move your mouse with some applications

  If my post is not detail for you
  Try google with the keyword "how to turn off the graphics acceleration in windows xp" - you will get some good instructions

  That will solve your problem!

  Good luck and enjoy your nice laptop!

  Arthur

• My computer redirects me to random pages and turn my CPU at 100%... I think that his "ping.exe".can someone help?

  Original title: ping.exe

  I have something on my computer that redirects me to random pages and runs my CPU at 100%... I think that his "ping.exe".can someone help?

  MalwareBytes's AntiMalware - no AntiVirus. ;-)

  Probably your best bet - flatten (wipe) the system and start from scratch.  You will need your most recent backup (your stuff, like your documents, photos, music, video, spreadsheets, databases, presentations, bookmarks/Internet favorites, e-mail contacts, serial number, proof of purchase/receipts, that may have been scanned in, etc. and so on...) and a good list of installed software and hardware specifications (I suggest Belarc Advisor running on the current system and print the results if possible) then you can get the drivers before or after installation.

  Of course, you will also need your multimedia installation product key/serial numbers and that go hand in hand.  In Windows XP - there is no way for me to know (without telling you) what level your installation CD is... so you will need to install the SP2 and SP3 after installing the operating system.  I would leave it disconnected from the Internet (physically) until it is at least SP3 and you have confirmed its firewall is enabled and, if possible, you have installed an antivirus application.

  For you, I suggest the eSet 32 antivirus (not more) - which costs ~ $60 every two years for private users.  Add to that the MalwareBytes full package which costs, if I remember, ~ $25 for life.

  Then, once the system * is * connected to the Internet (physically) - get hardware drivers installed for everything and the rest 100 + installed post-SP3 updates.  Then you can worry about all your other programs and restore your files LAST.

• Use Windows 7 CPU to 100% only when it is plugged

  I post this topic only because my problem is quiet unusual. I found hundreds of topics related to 100% CPU usage in Windows 7, but none of them was related to this over-consumption of the processor during the charging of the battery. There is also a situation that 100% of CPU usage occurs while working on the battery, but my case is completely the opposite.

  Windows 7 x 64 prof. system goes to 100% CPU use occasionally and it becomes impossible to work. then all of a sudden, the problem goes away and everything works right. After a few days of work without problem the problem returns and so on. I did the fresh install several times and the problem appeared immediately after the installation of the system every time. Finally, I discovered, that it lasts only when the charger is plugged in when you are working on the battery, everything works correctly. pluggng immediately after the CPU reaches 100% usage and so on.

  laptop HP Compaq 6710 b, Windows 7 x 64-teacher system.

  Help!

  Hello once again, Andre. Thank you for helping me. I tried to find such a framework (high precision event Timer) in my BIOS, but I did not: it seems to be fixed on my laptop. However, I found it in my Windows Device Manager and I have disabled HPET here, but it did not help in any case - there is no change in the use of the CPU (always 100%).

  BUT - I found an effective solution on my own! The thing was very simple - it was the fault of my power cord to the AC adapter / CC. I tried my colleague adapter and CPU usage dropped sharply to 5-10% on idle. Then I plugged my power adapter - use has exploded to 100%, and again, I used my colleague adapter - use declined.

  THE REASON FOR THE HIGH IN MY CASE CPU USAGE WAS DEFECTIVE AC ADAPTER

  It was a big surprise for me, because the problem occurred only from time to time. Apart from this, the laptop work properly. I tried hundreds of things, including the reinstallation of the system 3 times, change a hard drive (which seemed to make some strange sounds), my memory test, install the latest drivers from HP, change settings loading, etc. Only after buying a new battery (the old one was not operation at all) I noticed that the problem goes away after unplugging the AC adapter.

  I lost a lot of time trying to solve this problem and it was very frustrating, I also found that a lot of people have similar problems, so if you, dear reader, have 100% CPU use problem, unplugg your power adapter first know, that it's abandoned.

• How to capture (record) streaming video online with his partner is on El Capitan?

  Someone can advise or recommend including many different programs available that I must use to capture (record) streaming video online with it's associated audio on El Capitan?  I tried MacX DVD Converter Pro, but believe it or not, it does not record the audio aspect of video stream.  They claim there is a work around, but after 3 days of trying various corrections, none seems to work for me.

  I tried the Safe Mode Terminal command string: turn off the csrutil. restart, but which did not allow audio capture of MacX DVD Converter Pro driver to install their Audio System driver.

  I tried sudo nvram boot-args = "kext-dev = 1 mode" method, but then again, playback of the recorded video was silent, even though I have heard the audio during recording. "

  I downloaded SOUNDFLOWER, but again, I have heard audio when the screenshot, but Quicktime playback was silent.

  I have hard to believe after that 3 days I am still unable to record what I see and hear at the same time on my screen a video streaming like a Charlie Rose interview with Martin Scorcese discussing Felini.  I don't like what it costs; I care only about the easy, professional and perfect results.  One of the two reasons why I BOUGHT this iMac 27 "with El Capitan was so I COULD record streaming video with audio if I choose so, and after a month, I still can't do and I ran out of the online help after searching dozens of sites to find answers!  So I now turn to the Apple community.  Thank you!

  Anthony

  SnagIt œuvres

  https://www.techsmith.com/SnagIt.html

• Live streaming video issues

  I look after a small PC of old ladies in Australia, of the Canada.  She used to watch live webcams to the Canada video looking at snow & ice but now with a new HP PC it can not display the stream live... or to be more precise that she can see, but the site does not load properly and displays a still image.

  If the browser is refreshed the image updates, but is a still image.

  We can see the time, so we know there is a preview of the taken video, but it will not be updated with the live stream.

  I read the other posts about similar problems, but can't seem to find an answer.

  I updated its Windows media player, which is uninstalled then reinstalled both Shockwave & Flash to the latest versions, but still the video will not play correctly.

  She can watch other videos for streaming live, but it just seems to be a problem with this one in particular.

  I tried the same webcam feed other computers to the Canada and the United Kingdom with no problems.

  She has a HP610-1010 has Touchsmart with installed ATI Radeo HD5570 graphics card.

  Can anyone suggest anything else I can be on...?

  Thank you

  Malcolm

  Hi - Thanks for your help. I think I found the solution. I checked again in the United Kingdom and found that does not now by streaming video and just displaying still images. There must be an intellectual property sensor on the site of blocking live outside of North America. Bad luck!

• Equium L40-156: Vista IE 7 WMP 11 - can't watch streaming videos

  I have an Equium L40-156, running Vista Home Premium, WMP 11, IE 7.
  I can't watch streaming video!

  I can on my computer which is running XP and IE7.
  I searched the forum after forum, and I'm still not close to solve this problem.

  Please please can someone help me...
  I'm pulling my hair out lol

  Thank you

  What to say that you need a plug-in. You may need to install an Adobe flash player?

  Check it!

• Satellite A660-07U freezes when Streaming video

  I bought a Toshiba satellite A660 07U 2 months ago.
  Since the beginning, when I try to watch any video streaming of Facebook, Youtube, etc, my system crashes completely and don't stop making the zzzzz... noise and I have to manually shut down the laptop by pressing the power button.

  This happens very often now. I contacted toshiba support and the response was to change my microphone amplifier, configure Volume settings... : smileysurprised:.

  Does anyone have advice for this problem?

  Hello

  This only happens for internet streaming videos or have you noticed that also play videos stored on the HARD drive?
  Could it be linked to the internet connection is slow?

  If this isn't the case, then I would check the processes running in the background. Some processes may insist on the CPU, and this might be the reason of this gel.

  Just an another idea;
  Have you checked a few other graphics drivers? Update the driver and test again.
  I recommend also using actors.

  Good luck

• Why my monitor goes black after a minute?

  I have my standby power setting to turn off the monitor after 15 minutes when it is plugged.  But if I don't move the mouse or press a key for a minute, the screen goes black.  It's very embarrassing, especially if I watch a video.

  Is there another setting somewhere that says monitor going black after a minute of no activity?

  Thank you

  PAM

  Hi Pam,.

  Here's another setting worth it.

  Right-click on an empty area of the desktop and select Personalize.  Click the link to screensaver at the bottom right.  In the next window, adjust the time before the screensaver kicks in the drop "Wait" to a more acceptable value.  Click on apply, then Ok to save the change of the parameter.

  Kind regards

  DP - K