my laptop CPU going 100% why is it so?

Similar Questions

• CPU goes 100 after streaming video

  I had this problem for about 2 months,

  My computer loads slowly, but then pretty much works ok

  However, the main problem is when I watch videos online (streaming) videos, I'd be ok if I do not open the secondary videos.

  but then again after watching the 10-15 minute video, CPU is going to really high and reached 100, so I have to close all

  and after a while I can watch the video again, because the CPU goes back to about 0 after 5 minutes to all tasks.

  Same word would get a high rating of CPU when this happens, usage audiodg.exe WmiPrvSE.exe unsecapp.exe take exceptionally high CPU

  and they are especially difficult to treat because it is the main reason that I have to wait so long. Services like winword, explorer.exe and all sorts of basic tools would also get high ratings of CPU after this video streaming for a while. This does not happen when I open the tabs and browse the internet.

  I tried to many antimalware, antivirus, antispyware, and all sorts of performance pieces, same windows repair tweaking.com all-in-one doesn't do much.

  My guess is that I messed up with the services, but I reset and I do not know what else to do.

  Also, I can I have removed some things with HijackThis I shouldn't, but it was after that this problem occurred.

  Other questions I should mention are: computer flashes 2 or 3 times before opening, startup is particularly slow (I have avast as a start), and generally programs loading takes longer than normal, so that several times (don't know why), it loads quite fast.

  Temperatures: THRM Max: 72 (161)

  CPU core 0 Max: 76 (168)
  Processor core 2 maximum: 74 (165)
  Assembly Max: 38 (100)
  Max air flow: 38 (100)

  Please, if you have an idea in words to make my computer more stable and reliable, let me know.

  Fire.

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• Windows 7 Laptop CPU at 100%

  Hello

  Laptop Windows 7 turns to the CPU at 100%.  Reinstalled Windows 7 - same problem.  Remove it the battery, power on, replace the battery - unless there are problems.  Given the multitude of bugs online - still the same problem. Please notify.

  Thank you

  Joe

  Is not a difference. Two of them work.

• CPU goes to 100% svchost State takes all the resources on the Qosmio F10

  CPU goes to 100% svchost State takes all the resources. Norton can not find any illegal software. Have tried to list the processes (run... etc.). I get a long list, don't know what to do about this. Anyone out there have some help?

  Hey Buddy

  The same problem here. :( A universal solution is unknown to me but what I do is from the Task Manager. When svchost shows more than 90% of its use I simply stop this stupid process. After having done that, I can use my laptop without any problem and it will not happen again.

  After restarting the laptop, the same thing happens again. I checked some other forums but never found no reasonable explanation how manage this stupid question.

  If someone knows more please let us know.

• Why my laptop keep going to workoffline

  When I go to yahoo or any other website my laptop will work offline, why is this?

  Hi richardfarlow,

  ·         You use Internet Explorer?

  ·         If so, which version is installed?

  ·         Change to work offline by itself?

  You can try the following if you are using Internet Explorer.

  Method 1: Check the following.

  a. open Internet Explorer.

  b. press Alt on the keyboard and select the file in the menu bar.

  c. click work offline to disable the option.

  Note If this option is enabled, a check mark appears next to work offline.

   

  Method 2: Reset the Internet Explorer settings.

  How to reset Internet Explorer settings

• Portege R100 - CPU usage 100%

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to start records search engine, when I update the list of wireless networks and I explore the files by clicking on 'My computer', (this does not happen when I right click on START and 'Explore') displays CPU usage 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  It has nothing to do with your computer - this is the trident driver problem - there is a work - around
  Try changing your display configuration-

  (1) right click on your mouse to the desktop to bring up the display property, and then click Advanced - here, you will see a tab say somethng like 'graphic acceleration.
  (2) reduce the rate of acceleration - move the tab to the left - make sure it is not full
  (3) this trident driver can cause the BONE to redraw the screen whenever you move your mouse with some applications

  If my post is not detail for you
  Try google with the keyword "how to turn off the graphics acceleration in windows xp" - you will get some good instructions

  That will solve your problem!

  Good luck and enjoy your nice laptop!

  Arthur

• Computer Dell laptop screen goes black

  The screen on my laptop going black shortly after turning it on.  It's a Dell 1525 inspiron about 5 years.  Have plugged an old monitor inside and it works but technically sound now your desktop!  Someone else has encountered this and found a solution? I tried to increase the State min and max CPU to 100% as someone suggested, but he did not.

  Hello

  Sounds like the material if you need assistance from a real computer store (one that works on Dell
  internal laptops) or Support of Dell. Also check Dell to get a documentation, drrivers and ask
  the Dell Forums on known problems with this model.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Use Windows 7 CPU to 100% only when it is plugged

  I post this topic only because my problem is quiet unusual. I found hundreds of topics related to 100% CPU usage in Windows 7, but none of them was related to this over-consumption of the processor during the charging of the battery. There is also a situation that 100% of CPU usage occurs while working on the battery, but my case is completely the opposite.

  Windows 7 x 64 prof. system goes to 100% CPU use occasionally and it becomes impossible to work. then all of a sudden, the problem goes away and everything works right. After a few days of work without problem the problem returns and so on. I did the fresh install several times and the problem appeared immediately after the installation of the system every time. Finally, I discovered, that it lasts only when the charger is plugged in when you are working on the battery, everything works correctly. pluggng immediately after the CPU reaches 100% usage and so on.

  laptop HP Compaq 6710 b, Windows 7 x 64-teacher system.

  Help!

  Hello once again, Andre. Thank you for helping me. I tried to find such a framework (high precision event Timer) in my BIOS, but I did not: it seems to be fixed on my laptop. However, I found it in my Windows Device Manager and I have disabled HPET here, but it did not help in any case - there is no change in the use of the CPU (always 100%).

  BUT - I found an effective solution on my own! The thing was very simple - it was the fault of my power cord to the AC adapter / CC. I tried my colleague adapter and CPU usage dropped sharply to 5-10% on idle. Then I plugged my power adapter - use has exploded to 100%, and again, I used my colleague adapter - use declined.

  THE REASON FOR THE HIGH IN MY CASE CPU USAGE WAS DEFECTIVE AC ADAPTER

  It was a big surprise for me, because the problem occurred only from time to time. Apart from this, the laptop work properly. I tried hundreds of things, including the reinstallation of the system 3 times, change a hard drive (which seemed to make some strange sounds), my memory test, install the latest drivers from HP, change settings loading, etc. Only after buying a new battery (the old one was not operation at all) I noticed that the problem goes away after unplugging the AC adapter.

  I lost a lot of time trying to solve this problem and it was very frustrating, I also found that a lot of people have similar problems, so if you, dear reader, have 100% CPU use problem, unplugg your power adapter first know, that it's abandoned.

• Portege will extinguish after iTunesphotoprocessor.exe gets the CPU to 100% usage

  Hi all

  I am having a problem with my Toshiba Portege and sync with my iPad2.

  I'm syncing large amount of photos to my iPad, when synchronization progess is at the stage of optimization photos iTunes runs two processes iTunesphotoprocessor.exe and the CPU usage is 100%.

  The Toshiba fan then runs at full speed until the immedialtey of the computer turns off.
  It is not a normal shutdown of Windows 7 64-bit. It's an energetic power loss, while the Toshiba is on a/c.

  I can reproduce the same with my iPhone 4.

  I thought I should use a USB hub with an adapter separated instead, unfortunately, there is no difference.

  It is not only synchronize photos that it occurs also when I sync movies and only iTunes.exe running at 100% CPU usage.
  Which brings me to the conclusion that the iPad draws a lot of power of the Toshiba until the laptop is on its knees.

  I use external drives (not USB powered) and can copy a lot of data without any problem.

  Perhaps worth mentioning that I have improved the Toshiba two months ago for Windows 7 64 bit and installed all the 64-bit drivers found here on the forum with the upgrade of the BIOS.

  Any hint is appreciated.

  Thank you

  Hello

  In my opinion this has nothing to do with the power supply or the power adapter plugged.
  The iTunesphotoprocessor.exe belongs to the iTunes software and in my opinion this software highlights the laptop CPU s that cause automatic shutdown!

  This means that it is not a problem of laptop but the Apple software.
  I m not sure if it s a compatibility issue with 64-bit Windows system, but he s certainly an iTunes problem

  So, in my opinion, you need to reinstall this software to see if that would help
  You can uninstall this software from the system and could clean the registry with CCleaner, it helps to clean the registry
  After that and after new restarts, you can try to install a version compatible 64-bit iTunes maybe it helps

• Read the CPU hits 100% in the FIFO usage

  I have a PC in real-time with a card of RIO 7833R. I write the values that I read a microphone in a FIFO at a sampling rate of 4 kHz.The length of the FIFO is 2048. The PC in real-time, when I call 'FIFO read' function to read say 400 data samples, the use of CPU time real PC hits 100%. Why is it so? The function 'Read FIFO' is placed inside a while loop.

  Thank you

  Prashant

  Hi Prashant,

  Reading the FIFO is a method of querying, so if the number of elements specified to read are not available when the method is called, it queries the FPGA until they are.  This causes the CPU to 100% usage. You can find more information on this subject and a way around this here.

• Windows XP I often setup.exe keeping the CPU at 100% for at least a few minutes.

  Running Windows XP, I often setup.exe keeping the CPU at 100% for at least a few minutes... this process can be completed or ignored?

  "Setup.exe" is a generic term used by many applications.  The short answer is 'yes', it's OK to complete the process, but you really need to know what it is and why it continues to run.

  You probably need to download, install, update and run these free malware scanner (not at the same time):
  MalwareBytes AntiMalware
  SUPERAntiSpyware

  If that is not fix things, and assuming that this process begins when you start the computer, download, install, and run Autoruns.  When Autoruns has finished scanning, click the 'Connection' tab and look for the line that contains "setup.exe".  You can just uncheck the box on the left, or remove the item, which will prevent the routine of starting when Windows starts.

  Preferably, however, you should look at the path containing setup.exe where you should be able to deduce what application is trying to set itself up.  You can then take the appropriate measures, which may be simply delete the folder that contains the file.  Note that if you delete the file, you must ALSO remove the line in Autoruns, otherwise you will get a "file not found" error every time Windows starts.

• Event Viewer Help - PC uses the CPU to 100% every 10 seconds

  Every 10 seconds, my CPU goes to 100% usage and then back down to normal levels.  When I check the event viewer, it says that Itunes is the source of the problem.  I uninstalled Itunes and other Apple software and still have the problem.  How to use the info in the event viewer to clear the file that asks that question?

  The event viewer displays the following:

  GroupOperationId 143

  OperationId 800

  Operation Start IWbemServices::ExecQuery - select * from Win32_Product where Name = "iTunes."

  ClientMachine Local

  User . \SYSTEM

  ClientProcessId 0

  NamespaceName \\.\root\cimv2

  Help! I have spent HOURS trying to understand this point and cannot!

  Thank you

  Jaime

  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click on everything and see if there are lists of iTunes.  If so, clear the checkbox to remove the starter.  Check the complete list in case there is more than one entry.  When finished (if you foind alone), reboot and see if the problem persists.

  Download Revo and use it to uninstall iTunes http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html.  He is able to find and to perform an uninstall, then restart and see if the problem is resolved.  If he could not find or uninstall iTunes do not bother with the reset - it did not work.  Try to reinstall iTunes and then uninstall with Revo instead of Vista uninstalling the program to see if that makes a difference.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Double-click the error message in the event viewer, and it can provide premanente details that can help us find the problem.  Here's how to use Event Viewer: http://www.petri.co.il/vista-event-viewer.htm. Display any additional information that you will learn (if any).

  In the Task Manager when you see the running process, try clicking on it and then click end task.  Is there any task containing more than 10% of the CPU at all times - if so, what?  I assume that you have already tried it and a new process starts just 10 seconds later.

  The above information is useful in telling us that iTunes seems to be the cause.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After awhile java.exe is the CPU at 100%

  Hello!

  I have a problem with the java.exe in the environment in which I work. In the environment, I have a physical server: Sun Fire X 4100 Server with 2 processors and 16 GB of RAM for control of virtualization. On the system, this is the Microsoft Windows Server 2008 R2 Datacenter and vCenter 5.5.

  For the most part, we are 5 guys in the team who use the vSphere Web GUI. We are connecting to the server using RDP and after some time, we can not connect because the CPU is at 100%. It takes 20-30 minutes to be able to connect. And then 5-10 minutes to be able to click on something. For example, to kill the java.exe file keeps the CPU at 100%. This isn't a good idea because afterwords the Web GUI does not work so we need to restart the server.

  Anyone of you have any idea why this is happening?

  Bogdan

  Sorry! I can't see the part about it being the physical server... which version of VC is this?

  A few resources that might help:

  VMware KB: VMware vCenter Server resource use is 100% and no longer

  http://Brian-Kayser.blogspot.in/2013/04/VMware-VirtualCenter-Server-high-memory.html

  Concerning

  Girish

• Adobe Reader version 11.0.07 is cranking up my cpu to 100 and slow down my PDFs made any advise printing on this issue

  Hello

  I hope someone can help, I have problems with adobe reader, whenever I have open a multiple PDFs open my CPU goes to 100% usage and when I try to print something, the computer freezes.

  Once I end the process, the computer goes back to works fine

  I have adobe reader version 11.0.07.

  Thank you

  Post edited by: jay tronilo

  Is preferably next fall in security (protection)

• When I download (save a file) where is she going? Why can't directly where I want to go? IE allows me to choose where I save each file to

  When I download (save a file) where is she going? Why can't directly where I want to go? IE allows me to choose where I save each file to

  You set downloads to always go to a folder or to ask you every time.

  • Options > general > downloads section
    • ' Save files to: "and choose a folder (always stops in this case) {This is the default setting for Firefox, you can change the folder or move in" always ask me... "} {"below}
    • "Always ask me where to save files.
  • See-> window Options - general Board

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.