hp6520 has no power

My photosmart 6520 is 5 months old and I just installed a new HP cartridge black today and printed two copies of the document. About 30 minutes later, I needed to print another document and is not printing. When I checked the printer it was totally dead. I tried another taken, but still dead. I changed the 5amp fuse, still dead. Is there some magic switch, I do not know, or has bitten the dust, thanks for any help printer.

Hi @mrs-miggins ,.

Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

I understand that you are having feeding problems with your printer.

Only this is a no document can help you resolve the problem. The HP printer will not be running or to respond when the power button is pressed

I STRONGLY recommend to contact the Technical Support of HP that you should still be in warranty and they can help out you.

If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

I hope this helps. Looking forward to your response!

Tags: HP Printers

Similar Questions

No video input for monitor and powerless keyboard - computer has the power

My computer of girls, with the XP system, has the power (power light flashing & the fan) but the monitor receives no video entry and keyboard is dead. I tried another monitor, but still no video input. Suggestions for remedy to appreciate. Thank you, Pat J

You are more than welcome to help.

I don't want to throw another curve ball, but I was working on a computer the other day who had the same symptoms as your daughter. The computer would turn on but nothing on the screen. I replaced the graphics card and still no dice. I don't know what made me do but I removed one of the sticks of ram and bam! The graphics was back. This isn't the way that computers are supposed to work. Either the graphics or the ram of the computer must issue codes beep on startup when a component fails. Beep codes each model represents a different problem. I guess what I mean here is you can try to remove one of the sticks of ram and then start the computer. Repeat for each stick. If you intend to go inside a computer, unplug the power cord to the computer before opening the case to work inside. With his unplugged cable press and hold the button for 10 seconds. Make sure that you do not work in an area with carpet covered floor. Repeat these steps each time that you turn off to check a different key. If the icons still do not appear, you are left to try a new graphics card. The one I linked to is a decent card at a fair price. However, if check you with you parts used computer repair shop (not these geeks of department store) you can find out who sells. Tiny most computer stores sell these items and they are generally tested before being put on sale.

Is there a way to transfer files from a computer that has no power on a work computer?

I have a new computer because my old one no longer lights due to a charging problem. The battery only lasts a few seconds, and the old computer does not work on AC. The computer's power cable is fine, it is internal to the old computer. My question is, is it possible to transfer files from my old computer, which has no power to the new? The old computer is running Windows XP, and the other running Windows 7. I look forward to an answer and I appreciate the time.

Mark T.

original title: transfer of content.

You can buy an adapter cable that will connect the hard drive of your old computer to your new computer as a USB device. For example:

http://www.Amazon.com/drive-adapter-converter-optical-external/DP/B002OV1VJW

my computer has the power, but it does not start.

my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!

Hi moozer_890

1 during how long have you had this problem?
2. have you updated display drivers installed on the computer?

Method 1 :
To resolve the problem, you can see if the uninstall and reinstall then the display driver-
Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

a. click Startand then click Control Panel.

b. click system and Maintenance, click Systemand then click on Device Manager.
Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
If you are prompted for an administrator password or a confirmation, type the password, or click allow.

c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

d. When you are prompted to confirm that you want to remove the device, click OK.

e. restart the computer.

After the computer restarts, the drivers will be installed automatically.

Method 2:

If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.

You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

I hope this helps.

Computer HP laptop, G7-1365dx has no power on the USB ports

The laptop has no power over but has sense on the usb ports. If I plug a usb powered auto element into a port, it works very well but is not one unpowered. How can I turn on the power to the usb ports?

If your laptop is still in warranty contact HP total care. To solve this problem, the system board must be replaced.

It apears that you have inadvertently pointed the USB ports with something that needed too much current.

could not power on VM: no space is available on the device. Has no power on VM

I'm trying to start a guest o/s on an ESX 3.5.0 host, but I get the following error;
could not power on VM: no space is available on the device. Has no power on VM
Can someone point me in the direction of why this can be implemented.
Info. who can help;
replied the volume of a partner SAN / SAN and he was promoted to a volume. Added the VM to the inventory, disabled, connect to the network at startup.
Then the message failed to try to turn on,

Thanks for the reply, free space seems OK.

Are you sure?

Use this command (from ESX CLI):

VDF h

How much vRAM you have assigned to your virtual machine?

-

My new Qosmio X 500 has a power on problem

My laptop Qosmio X 500 has a problem. When I turn it on nothing happens and I have to remove the battery and replace it until my laptop started to work.
BIOS of my laptop is new, I need to update.
The battery is fully charged too.

Can someone tell me what I need to do?

I bought it only for 1 week.
It seems that I should send it again.

Please someone give me advice

Power supply is connected to your laptop when this happens?

CANON 70 D HAS NO POWER USING THE ADAPTER SECTOR OR 2 DIFFERENT BATTERIES

I WAS USING THE CAMERA THE DAY BEFORE, I BOUGHT THIS CAMERA IN DECEMBER 2013. I USED THIS CAMERA VERY SLIGHTLY.

TODAY, I WENT TO DOWNLOAD VIDEO FROM THE CAMERA TO CHANGE IT, BUT THE CAMERA WOULD NOT TURN USING THE A/C ADAPTER. I KNEW THAT NOTHING WAS WRONG WITH THE ADAPTER, BUT I PUT IN 2 DIFFERENT BATTERIES AFTER CHARING, THEM AND STILL NO POWER.

I HAVE REPEATED TO TRY THE A/C ADAPTER AND BATTERIES. I TRIED TO TAKE THE CARD, THE LENS AND MAKING SURE THAT THERE NOTHING PREVENTS THE CONTACTS FOR THE A/C OR BATTERY.

I STARTED SEARCHING ONLINE OF THE KNOWN FOR THE CANON 70 D ISSUES, I DIDN'T KNOW ANY SPECIFIC 70 D BUT I FOUND A FEW ISSUES FOR OTHER CAMERAS OF CANON WITH THE SAME QUESTION.

SOME WERE TOLD TO TAKE THE CARD AND THE LENS AND REPLACE IT WITH ANOTHER GOAL, THEN PLACE THE CARD BACK, AND THEN ADD THE BATTERIES AND THAT WILL FIX THE PROBLEM. IT DOES NOT WORK. ANOTHER VIDEO THAT I FOUND SAID THAT THERE WAS A SCREW LOOSE ON THE CIRCUIT BOARD PRINTED FOR THIS OLDER CANON CAMERA... HIS SCREWS SEEMED TO BE MORE IMPORTANT THAN THE SCREWS THAT THE 70 D A SO IT WILL BE VERY HARD FOR ME TO FIND A SCREW DRIVER THAT SMALL... I HAVE TO GO BUY A KIT. BUT NOT RADIO IM LOOKING AT THE BOTTOM OF MY CAMERA IF TAKE APART WILL WORK, IT SEEMS THAT MY CAMERA BODY COMES OFF AS NOT EASILY THAN VIDEO.

SO NOW IM STUCK WITH MANY PROJECTS VIDEO IM IN THE MIDDLE OF... BUT NOW I DON'T HAVE A CAMERA... I CAN'T AFFORD TO DO REPAIR, AND I CAN'T AFFORD TO BUY JUST ANOTHER CAMERA AND I'M NOT SURE IF THIS UNIT IS UNDER WARRANTY FROM CANON. I BOUGHT AT B & H PHOTO AND I STILL HAVE THE RECEIPT OF E-MAIL FROM THE PURCHASE.

https://www.YouTube.com/watch?v=FYlNyZ1IP3s

HAS ANYONE ELSE HAD THIS PROBLEM WITHT THE CANON 70 D?

AFTER VIEWING THE VIDEO SHOWING THE SCREW CAME OUT ON THE MOTHERBOARD OF THE PC, NOW I SHAKE MY CAMERA, I THINK I CAN HEAR SOMETHING MOVING INSIDE... BUT IT COULD BE MY IMAGINATION. I'M NOT 100% SURE, I HEAR SOMETHING LOOSE. IT REALLY SUCKS BECAUSE I CAN'T COMPLETE MY PROJECTS AND I'VE FITTED THE CASE OF MONEY THE NEW LENS CAMERA AND PURCHASE HAS RECENTLY...

IF YOU CAN NOT SAY THAT IT IS THE BATTERIES BECAUSE IM ALSO USING AN A/C ADAPTER. I KNOW HOW TO TURN ON THE CAMERA! IM GETTING NOTHING. NO POWER,

I NEED HELP.

I CORRECTED MY OWN QUESTION.

WHAT WOULD HAVE COST ME HUNDREDS OF DOLLARS BY SENDING IT TO CANON, I MANAGED TO SOLVE THIS PROBLEM AND PERHAPS OTHERS HAVE HAD THE SAME PROBLEM AND THEY MAY HAVE SPENT MONEY UNNECESSARY. I SPENT ONLY $6 AND A FEW CHANGES... ALLOWS CALL HIM $7 TO SOLVE THIS PROBLEM.

I DON'T HAVE TO DISASSEMBLE THE APPLIANCE BUT AS HE TRIED TO DO, I SAW SOMETHING THAT I SUSPECTED WAS THE QUESTION. I PLAYED A BIT WITH THIS SWITCH OR SOME TYPE OF CENSORSHIP OR LOCK.

SOMETHING LIKE THIS WAS SO SIMPLE TO SOLVE, BUT COULD HAVE COST ALLOT ME OF MONEY. THE PART IS TOO DELICATE. NOW THAT I'M AWARE OF THIS, I CAN BE MORE CAREFUL, BECAUSE I WAS ALREADY VERY CAREFUL WITH ALL MY CANON... BUT IT WAS SOMETHING I WOULD HAVE NEVER EXPECTED THAT IS THE PROBLEM, I SAW THAT HOLE SOONER BUT NA NOT KNOWING WHAT IT WAS FOR... WHILE I WAS GETTING READY TO TAKE OFF THE BATTERY COVER, I NOTICED SHE HAD A TYPE OF CONNECTOR THAT WOULD GO IN THE HOLE (SQUARE) SO I SIMPLY PUT A PEN IN THE HOLE AND THERE IS A SWITCH OR SOMETHING, I PUT THE SWITCH IN THE CENTER. I PUT THE BATTERY IN THE CAMERA, AND THEN HE CAME.

https://www.YouTube.com/watch?v=nBmtTQn3RlE

VM Player has no power on the virtual machine

Hello
I use VMS 6.0.1 player but not in power on a virtual machine, the error log which im getting is below. can kindly help me on this.
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: Log for VMware Player pid = 4964 version 6.0.1 = build = build-1379776 option = output
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: The process is 64-bit.
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: Host = encoding windows-1252 = windows-1252 codepage
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: Host is Windows 8 Enterprise, 64-bit (Build 9200)
2014 06-27 T 10: 11:24.893 + 05:30 | VMX | I120: VTHREAD initialize main thread id 0 "vmx" host 2868
2014 06-27 T 10: 11:24.893 + 05:30 | VMX | I120: REGIONAL windows-1252-> user NULL = 409 system settings = 409
2014 06-27 T 10: 11:24.893 + 05:30 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (workstation C:\ProgramData\VMware\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (workstation C:\ProgramData\VMware\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (workstation C:\ProgramData\VMware\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: Msg_Reset:
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: [msg.dictionary.load.openFailed] cannot open the file 'C:\Users\Administrator\AppData\Roaming\VMware\config.ini': the system cannot find the specified file.
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: ----------------------------------------
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: ConfigDB: cannot load C:\Users\Administrator\AppData\Roaming\VMware\config.ini
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: OBJLIB-LIB: Objlib initialized.
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (C:\ProgramData\VMware\VMware player): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (C:\ProgramData\VMware\VMware player): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: not reproducible error (C:\ProgramData\VMware\VMware player): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: Msg_Reset:
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: [msg.dictionary.load.openFailed] cannot open the file 'C:\Users\Administrator\AppData\Roaming\VMware\config.ini': the system cannot find the specified file.
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: ----------------------------------------
2014 06-27 T 10: 11:24.908 + 05:30 | VMX | I120: Optional preferences PREFS not found in C:\Users\Administrator\AppData\Roaming\VMware\config.ini file. Using the default values.
2014 06-27 T 10: 11:24.971 + 05:30 | VMX | I120: FILE: FileLockDynaLink: other process validation tools are: available
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:24.986 + 05:30 | VMX | I120: Hostname = ADITIDT821.aditi.tech
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = fe80::d037:11 has 4: c71c:6eb3 50%
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = fe80::bd13:9dfc:fb5f:6452% 49
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = fe80::3152:2dc5:a437:a08d % 12
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = 192.168.30.1
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = 192.168.229.1
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: IP = 172.20.151.102
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: HOSTINFO 689913608 @ 1948232Hz-> 0 Hz 1000000000
2014 06-27 T 10: 11:25.002 + 05:30 | VMX | I120: HOSTINFO ((x * 2152877070) > > 22) +-354122921691
2014 06-27 T 10: 11:25.033 + 05:30 | VMX | I120: System uptime 353942880 us
2014 06-27 T 10: 11:25.033 + 05:30 | VMX | I120: command line: "C:\Program Files (x 86) \VMware\VMware" "-ssnapshot.numRollingTiers = 0" "-sRemoteDisplay.vnc.enabled = FALSE" "-s" "vmx.stdio.keep = TRUE" "-#" "product = 4; name = VMware Player; version 6.0.1 =; BuildNumber = 1379776; licensename = VMware Player; licenseversion = 6,0; ""-@ ""pipe=\\.\pipe\vmx5f7cda9929347a3d;" «E:\SOASTA\CloudTest Lite vmwarevm\CloudTest Lite.vmx.»
2014 06-27 T 10: 11:25.033 + 05:30 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
2014 06-27 T 10: 11:25.254 + 05:30 | VMX | I120: Connection "ui" in the pipe "\\.\pipe\vmx5f7cda9929347a3d' user '(null) '.
2014 06-27 T 10: 11:25.255 + 05:30 | VMX | I120: VMXVmdb: local connection timeout: 60000 ms.
2014 06-27 T 10: 11:25.388 + 05:30 | VMX | I120: VmdbAddConnection: cnxPath = / db/connection / #1 /, cnxIx = 1
2014 06-27 T 10: 11:25.482 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:475]: VMAutomation: initialize VMAutomation.
2014 06-27 T 10: 11:25.482 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:772]: VMAutomationOpenListenerSocket() to listen
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Past vmx/execState/val of poweredOff
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1877, success = 1 additionalError = 0
2014 06-27 T 10: 11:25.501 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 3, newAppState = 1881, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: HD: version of the host is 6.2.9200
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: HD: addr fffff801dfcb6470
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: HD: fffff801dff6f180, 0
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Limit locked delta-2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: Locked limit delta 2560 pages
2014 06-27 T 10: 11:26.251 + 05:30 | VMX | I120: VerificationOfHostParameters status 0
2014 06-27 T 10: 11:26.266 + 05:30 | VMX | I120: FeatureCompat: masks VCA:
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID vendor: GenuineIntel
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID family: 0 x 6 model: 0xf stepping: 0xd
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID codename: Woodcrest/Conroe/Merom (Core)
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID name: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00GHz
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000000, 0 level: 0x0000000a 0x756e6547 0x6c65746e 0x49656e69
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000001, 0: 0x000006fd 0 x 00010800 0x0000e39d 0xafebfbff
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000002, 0 level: 0x05b0b101 0x005657f0 0 x 00000000 0x2cb4307d
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000003, 0: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000004, 0: 0 x 00000121 0x0000003f 0x01c0003f 0x00000001
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000004, 1: 0 x 00000122 0x0000003f 0x01c0003f 0x00000001
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000004, 2: 0 x 00000143 0x01c0003f 0x00000fff 0x00000001
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000004, 3: 0 x 00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000005, 0: 0 x 00000040 00000040 0 x 0 x 00000003 0 x 00000220
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000006, 0 level: 0x00000001 0x00000002 0x00000001 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000007, 0 level: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID 00000008, 0 level: 0 x 00000400 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 00000009, 0: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 0000000, 0: 0 x 07280202 0x00000000 0x00000000 0 x 00000503
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000000, 0: 0 x 80000008 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000001, 0: 0x00000000 0x00000000 0x00000001 0 x 20100800
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000002, 0: 0x65746e49 0x2952286c 0x726f4320 0x4d542865
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000003, 0: 0 44203229 0x43206f75 x 20205550 x 0 0 x 45202020
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000004, 0: 0 x 30303434 0 x 20402020 0x30302e32 0x007a4847
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000005, 0: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000006, 0: 0x00000000 0x00000000 0 x 08006040 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000007, 0: 0x00000000 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: hostCPUID level 80000008, 0: 0 x 00003024 0x00000000 0x00000000 0x00000000
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: CPUID of hostCPUID differences.
2014 06-27 T 10: 11:26.282 + 05:30 | VMX | I120: CPUID Maximum physical address Bits supported on all processors: 36
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x3a = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 480 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 481 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 482 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 483 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 484 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 485 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 486 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 487 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 488 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 489 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48a = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48b = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48c = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48d = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48e = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0x48f = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 490 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0 x 491 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0xc0010114 = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Common: MSR 0xce = 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: VMMon_GetkHzEstimate: calculated 1994989 kHz
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: HOSTINFO: host does not support the constant rate of TSC.
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: VMMon_RememberkHzEstimate: calculated 1994989 kHz
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: TSC kHz estimates: vmmon 1994989, 1994989, osReported 1995000 recalled. With the help of 1994989 kHz.
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: TSC of measured first delta 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: Min TSC Delta 0
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: RefClockToPTSC 0 1948232 Hz-> 0 to 1994989000 Hz
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: RefClockToPTSC ((x * 4294966073) > > 22) +-709145112373
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: tscOffset-764437781500
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: using TSC
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: material TSCs are synchronized.
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: PTSC: PTSC current = 244170
2014 06-27 T 10: 11:26.344 + 05:30 | VMX | I120: VMIOP: Init began
2014 06-27 T 10: 11:26.376 + 05:30 | VMX | I120: MACWireless: "emulated" registered wireless module
2014 06-27 T 10: 11:26.376 + 05:30 | VMX | I120: ConfigCheck: no rules file found. Controls are disabled.
2014 06-27 T 10: 11:26.376 + 05:30 | VMX | I120: change directory to E:\SOASTA\CloudTest Lite. vmwarevm\.
2014 06-27 T 10: 11:26.376 + 05:30 | VMX | I120: Config file: E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx
2014 06-27 T 10: 11:26.391 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.391 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1878, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.391 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite.vmwarevm\vmware-2.log): the system cannot find the specified file (2)
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | I120: VMXVmdbCbVmVmxExecState: change of State Exec asked State receiver without reset, soft, softOptionTimeout: 0.
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | I120: Tools: sending of 'OS_PowerOn' (status = 3) request state change
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | I120: Tools: delay demand for change from State to State 3.
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | W110: PowerOn
2014 06-27 T 10: 11:26.485 + 05:30 | VMX | I120: VMX_PowerOn: VMX build 1379776, UI build 1379776
2014 06-27 T 10: 11:26.500 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1871, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: HOST Windows version 6.2, build 9200, platform 2, «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT---C:\Users\Administrator\AppData\Roaming\VMware\preferences.ini USER PREFERENCES
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.license.maxNum = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.license0.version = "10.0"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.license0.registrationViewed = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.license0.lastEvalReminder = '30 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.hostMRU.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.hostMRU0.name = "localhost".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab0.dest = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab0.file = "C:\Users\Administrator\Documents\Virtual Machines\Windows XP Professional\Windows XP Professional.vmx"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab0.type = "vm".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tab0.focused = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.sidebar = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.sidebar.width = "200".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.statusBar = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.tabs = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.thumbnailBar = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.thumbnailBar.size = "100".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.thumbnailBar.view = 'open-vms.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.placement.left = "130".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.placement.top = "130".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.placement.right = '1070 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.placement.bottom = "739".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.ws.session.window0.maximized = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmWizard.guestKey = "winxppro.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmWizard.installMediaType = 'iso '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmWizard.isoLocationMRU.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmWizard.isoLocationMRU0.location = "F:\XP 32bit\en_winxp_pro_x86_build2600_iso.iso".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: = DICT pref.mruVM0.filename ' E:\SOASTA\CloudTest Lite vmwarevm\CloudTest Lite.vmx '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.mruVM0.displayName = "CloudTest Lite"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.mruVM0.index = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.eula.count = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.eula0.product = 'VMware Player'
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pref.eula0.build = "1410761".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - default USER IS C:\Users\Administrator\AppData\Roaming\VMware\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - HOST by default IS C:\ProgramData\VMware\VMware Player\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled.epoch = "32552.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.componentDownloadEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled.epoch = "32552.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.simplifiedUI = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - SITE by default IS C:\ProgramData\VMware\VMware Player\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled.epoch = "32552.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.componentDownloadEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled.epoch = "32552.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.simplifiedUI = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - NON PERSISTENT
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT snapshot.numRollingTiers = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT RemoteDisplay.vnc.enabled = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmx.stdio.keep = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT gui.available = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - COMMAND LINE
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT snapshot.numRollingTiers = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT RemoteDisplay.vnc.enabled = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmx.stdio.keep = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT gui.available = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - REGISTRATION
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT snapshot.numRollingTiers = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT RemoteDisplay.vnc.enabled = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmx.stdio.keep = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT gui.available = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - CONFIGURATION E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT config.version = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT virtualHW.version = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT scsi0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT scsi0.virtualDev = "free".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT memsize = "2048".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.connectionType = "bridged".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.virtualDev = "e1000".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.wakeOnPcktRcv = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.addressType = "generated".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.linkStatePropagation.enable = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ehci.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT sound.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT sound.fileName = "-1".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT sound.autodetect = "TRUE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT serial0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT serial0.fileType = "thinprint".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge4.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge4.virtualDev = "pcieRootPort"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge4.functions = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge5.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge5.virtualDev = "pcieRootPort"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge5.functions = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge6.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge6.virtualDev = "pcieRootPort"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge6.functions = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge7.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge7.virtualDev = "pcieRootPort"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge7.functions = '8 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmci0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT roamingVM.exitBehavior = 'go '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT tools.syncTime = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT displayName = "CloudTest Lite"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT guestOS = "centos-64.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT nvram = "CloudTest Lite.nvram"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT virtualHW.productCompatibility = "hosted".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT printers.enabled = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT proxyApps.publishToHost = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT tools.upgrade.policy = "upgradeAtPowerCycle".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT powerType.powerOff = 'soft '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT powerType.powerOn = 'soft '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT powerType.suspend = 'soft '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT powerType.reset = 'soft '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT extendedConfigFile = "CloudTest Lite.vmxf"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT numvcpus = '1 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.generatedAddress = "00: 0C: 29:f1:09:11.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT uuid.location = "56 4 d c3 7 c ec 7f 2A 8 c - e5 28 c1 d7 35 09 11 f1"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT uuid.bios = "56 4 d c3 7 c ec 7f 2A 8 c - e5 28 c1 d7 35 09 11 f1"
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT cleanShutdown = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT replay.supported = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT replay.filename = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge0.pciSlotNumber = "17".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge4.pciSlotNumber = "21".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge5.pciSlotNumber = "22".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge6.pciSlotNumber = "23".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT pciBridge7.pciSlotNumber = "24".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT scsi0.pciSlotNumber = "16".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb.pciSlotNumber = "32".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.pciSlotNumber = "33".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT sound.pciSlotNumber = "34".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ehci.pciSlotNumber = "35".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmci0.pciSlotNumber = '36 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmotion.checkpointFBSize = "67108864.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.generatedAddressOffset = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vmci0.id = "1042150165".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT tools.remindInstall = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT uuid.action = "crΘer".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT msg.autoAnswer = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.vnet = "vmnet2.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.bsdName = 'en0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ethernet0.displayName = 'Ethernet '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide0:1.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide0:1.fileName = "virtual disk 2.vmdk.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide0:1.redo = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT hpet0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb.vbluetooth.startConnected = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT vcpu.hotadd = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT mem.hotadd = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT softPowerOff = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.speed = '2 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.deviceType = "hub".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.port = "1".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:1.parent = "-1".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT checkpoint.vmState = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT bios.bootOrder = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT bios.hddOrder = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:0.deviceType = 'hidden '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:0.port = '0 '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT usb:0.parent = "-1".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT monitor.phys_bits_used = "40".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT workingDir = "."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide1:0.present = 'TRUE '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide1:0.fileName = "Virtual Disk.vmdk".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide1:0.redo = «»
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT ide0:0.present = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT scsi0:0.present = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT floppy0.present = "FALSE".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - default USER IS C:\Users\Administrator\AppData\Roaming\VMware\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - HOST by default IS C:\ProgramData\VMware\VMware Workstation\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled.epoch "13961 =."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.componentDownloadEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled.epoch "13961 =."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT authd.client.port = "903".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: = DICT authd.proxy.nfc "vmware - pass: ha - nfc".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - SITE by default IS C:\ProgramData\VMware\VMware Workstation\config.ini
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.autoSoftwareUpdateEnabled.epoch "13961 =."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.componentDownloadEnabled = 'yes '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled = 'no '.
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT installerDefaults.dataCollectionEnabled.epoch "13961 =."
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT authd.client.port = "903".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: = DICT authd.proxy.nfc "vmware - pass: ha - nfc".
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: DICT - Workstation\settings.ini C:\ProgramData\VMware\VMware GLOBAL SETTINGS
2014 06-27 T 10: 11:26.532 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: hostCpuFeatures = 0x4000fc
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: hostNumGenPerfCounters = 2
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: hostNumFixedPerfCounters = 3
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: hostPerfCtrArch = 2
2014 06-27 T 10: 11:26.594 + 05:30 | VMX | I120: CPU0: PMC: IA32, CORE 2 [c: 0 e f: 1: 1]
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MONITOR MODE: license modes: BT
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MONITOR MODE: user requested modes: BT HV HWMMU
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MONITOR MODE: favorite guestOS of modes: HWMMU BT HT
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MONITOR MODE: filtered list: BT
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MsgHint: msg.monitor.BTnoLM2
2014-06 - 27 T 10: 11:26.610 + 05:30 | vmx | I120 + binary translation is incompatible with the long mode on this platform. Long mode will be disabled in this virtual environment. Applications that require a long mode will not work correctly as a result. See http://vmware.com/info?id=152 for more details.
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120+ ---------------------------------------
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: MsgIsAnswered: use builtin default 'OK' as the answer to "msg.monitor.BTnoLM2".
2014 06-27 T 10: 11:26.610 + 05:30 | VMX | I120: HV settings: virtual exec = "software"; MMU virtual = "software".
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: OvhdMem_PowerOn: lib/overheadmem: paged 339753 non paged 16207 anonymous 37190
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: OvhdMem_PowerOn: first admission: paged 181587 non paged 36393 anonymous 8432
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: VMMEM: initial booking: 16776052 Mo (MainMem = 2048MB)
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: MemSched_PowerOn: minGuestSize ball 52428 (80% size required min 65536)
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: MemSched: mem reserved (in MB) min max recommended 128 2973 2973
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: PShare: activated 1 1 Adaptive scanRate [16, 400]
2014 06-27 T 10: 11:26.828 + 05:30 | VMX | I120: MemSched: mem 8432 524288 np 36393 pg 181587 anon
2014 06-27 T 10: 11:26.921 + 05:30 | VMX | I120: MemSched: numvm 1 locked pages: num 0 max 752896
2014 06-27 T 10: 11:26.921 + 05:30 | VMX | I120: MemSched: locked Page limit: host 917427 config 761088 dynam 805822
2014 06-27 T 10: 11:26.921 + 05:30 | VMX | I120: MemSched: minmempct 50 minalloc 0 admitted 1
2014 06-27 T 10: 11:26.921 + 05:30 | VMX | W110: NUMA: application of automatic dimensioning VM ignored
2014 06-27 T 10: 11:26.984 + 05:30 | VMX | I120: LICENSE: running in restricted mode
2014 06-27 T 10: 11:26.984 + 05:30 | WinNotifyThread | I120: Host Id 4 "WinNotifyThread" start thread 2856 VTHREAD
2014 06-27 T 10: 11:26.984 + 05:30 | WinNotifyThread | I120: WinNotify thread is alive
2014 06-27 T 10: 11:27.030 + 05:30 | vthread-5 | I120: VTHREAD start thread id 'vthread-5' 5, host 2860
2014 06-27 T 10: 11:27.030 + 05:30 | VMX | I120: PolicyVMXFindPolicyKey: policy file does not exist.
2014 06-27 T 10: 11:27.077 + 05:30 | VMX | I120: PolicyVMXFindPolicyKey: policy file does not exist.
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: IPI vectors host: 0 0. Vector monitor IPI: 0
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: Monitor_PowerOn: HostedVSMP tilt followed is disabled
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: Monitor64_PowerOn()
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: Worldswitch support: .wsBody64. Size = 480.
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: Load correctly .switchNMI worldswitch error handlers. Size = 240.
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: vmm64-modules: [vmm.vmm64, mmu - nohv.vmm64, vprobe - none.vmm64, hv - none.vmm64, gphys - sw.vmm64, none.vmm64-vmsafe, callstack - vmce, none.vmm64 - none.vmm64, vvtd - none.vmm64, {SharedInterVcpuVmxSection}, {SharedInterVcpuSection}, < MonSrcFile >, hvLoadedAsAddr = 0 x 0, useNPTAsAddr = 0 x 0, vcpusetFullAsAddr = 0 x 1, numVCPUsAsAddr = 0 x 1, busmemFrameMPNOffsetAsAddr = 0xc, busmemFramesPerPgDivSh2AsAddr = 0 x 7, busmemFramesPerPgDivSh1AsAddr = 0 x 1, busmemFramesPerPgDivMulAsAddr = 0 x 100000000, busmemFramesPerPageAsAddr = 0 x 100, busmemFrameSizeAsAddr = 0 x 10]
2014 06-27 T 10: 11:27.218 + 05:30 | VMX | I120: vmm64-vcpus: 1
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: KHZEstimate 1994989
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: MHZEstimate 1995
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: NumVCPUs 1
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: BusMemServices: checkRate page 16
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: UUID: UUID location is 56 4 d 5f d3 5 d comics 48 fb - 9f e3 76 40 63 bc 0 df
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: UUID: UUID location is 56 4 d c3 7 c ec 7f 2A 28 c1 d7 35 09 11 f1 8 c - e5
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: UUID: UUID location is 56 4 d c3 7 c ec 7f 2A 28 c1 d7 35 09 11 f1 8 c - e5
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: AIOGNRC: numThreads = 5 = 2 ide, scsi = 0, = 0 passthru
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: WORKER: create the new group with numThreads = 5 (5)
2014 06-27 T 10: 11:27.358 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:27.436 + 05:30 | VMX | I120: StateLogger::Replay State = 0
2014 06-27 T 10: 11:27.436 + 05:30 | VMX | I120: StateLogger::minDEThreshold: 70
2014 06-27 T 10: 11:27.436 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:27.607 + 05:30 | VMX | I120: WORKER: create the new group with numThreads = 1 (6)
2014 06-27 T 10: 11:27.607 + 05:30 | VMX | I120: MainMem: CPT host WZ = 0 SLEEP = 1 PF = 2048 D = 0
2014 06-27 T 10: 11:27.607 + 05:30 | VMX | I120: MainMem: CPT PLS = 1 PLR = 1 BS = 1 BufM = 0 Hamza_slm = 32 Mult = 4 W = 50
2014 06-27 T 10: 11:27.607 + 05:30 | VMX | I120: UUID: UUID location is 56 4 d c3 7 c ec 7f 2A 28 c1 d7 35 09 11 f1 8 c - e5
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MainMem: open paging file, 'E:\SOASTA\CloudTest Lite.vmwarevm\564dc37c-ec7f-2a8c-e528-c1d735f10911.vmem '.
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MMCHK: disabling of controls that are not forced, cannot make controls on some processors.
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MStat: creation vm.uptime Stat
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MStat: creation vm.suspendTime Stat
2014 06-27 T 10: 11:27.623 + 05:30 | VMX | I120: MStat: creation vm.powerOnTimeStamp Stat
2014 06-27 T 10: 11:27.623 + 05:30 | aioCompletion | I120: VTHREAD start thread id 6 'aioCompletion' host 1684
2014 06-27 T 10: 11:27.670 + 05:30 | VMX | I120: VMXAIOMGR: using the: simple = unbuf generic = Compl
2014 06-27 T 10: 11:27.732 + 05:30 | VMX | I120: WORKER: create the new group with numThreads = 1 (7)
2014 06-27 T 10: 11:27.857 + 05:30 | VMX | I120: WORKER: create the new group with numThreads = 16 (23)
2014 06-27 T 10: 11:27.857 + 05:30 | Worker #0 | [I120: DRIVE: OPEN ide0:1 '2.vmdk E:\SOASTA\CloudTest Lite. disc vmwarevm\Virtual' persistent R]
2014 06-27 T 10: 11:27.872 + 05:30 | vthread-7 | I120: 7 'vthread-7' host Id of the thread to start VTHREAD 2848
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [0]: "virtual disk 2 - s001.vmdk ' (0xa)
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [1]: "virtual disk 2 - s002.vmdk ' (0xa)
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #1 | I120: DRIVE: OPEN ide1:0 ['E:\SOASTA\CloudTest Lite vmwarevm\Virtual Disk.vmdk.' R persistent]
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [2]: "virtual disk 2 - s003.vmdk ' (0xa)
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [3]: "virtual disk 2 - s004.vmdk ' (0xa)
2014 06-27 T 10: 11:27.872 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [4]: "virtual disk 2 - s005.vmdk ' (0xa)
2014 06-27 T 10: 11:27.888 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [5]: "virtual disk 2 - s006.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [6]: "virtual disk 2 - s007.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [7]: ' virtual disk 2 - s008.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [8]: "virtual disk 2 - s009.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [9]: "virtual disk 2 - s010.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [0]: "Virtual Disk - s001.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-DSCPTR: open [10]: "virtual disk 2 - s011.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-LINK: open '2.vmdk E:\SOASTA\CloudTest Lite. disc vmwarevm\Virtual' (0xa): twoGbMaxExtentSparse, 41943040 sectors / 20 GB.
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #0 | I120: DISKLIB-LIB: open "disk Lite. vmwarevm\Virtual E:\SOASTA\CloudTest 2.vmdk" (flags 0xa, type twoGbMaxExtentSparse).
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [1]: "Virtual Disk - s002.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [2]: "Virtual Disk - s003.vmdk ' (0xa)
2014 06-27 T 10: 11:27.904 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [3]: "Virtual Disk - s004.vmdk ' (0xa)
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [4]: "Virtual Disk - s005.vmdk ' (0xa)
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #0 | I120: DiskGetGeometry: reading the disk partition table
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #0 | I120: DISK: "2.vmdk' E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk drive has 60 00 c2 9A UUID 0e 63 6f - ca 06 53 32 43 c7 e9 eb f3'
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #0 | I120: DRIVE: OPEN "E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk 2.vmdk" Geo (41610/16/63) BIOS Geo (44384/15/63)
2014 06-27 T 10: 11:27.935 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [5]: "Virtual Disk - s006.vmdk ' (0xa)
2014 06-27 T 10: 11:27.997 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [6]: "Virtual Disk - s007.vmdk ' (0xa)
2014 06-27 T 10: 11:28.044 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [7]: ' Virtual Disk - s008.vmdk ' (0xa)
2014 06-27 T 10: 11:28.075 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [8]: "Virtual Disk - s009.vmdk ' (0xa)
2014 06-27 T 10: 11:28.091 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [9]: "Virtual Disk - s010.vmdk ' (0xa)
2014 06-27 T 10: 11:28.122 + 05:30 | Worker #1 | I120: DISKLIB-DSCPTR: open [10]: "Virtual Disk - s011.vmdk ' (0xa)
2014 06-27 T 10: 11:28.122 + 05:30 | Worker #1 | I120: DISKLIB-LINK: "E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk.vmdk" (0xa): twoGbMaxExtentSparse, 41943040 sectors / 20 GB.
2014 06-27 T 10: 11:28.122 + 05:30 | Worker #1 | I120: DISKLIB-LIB: open "E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk.vmdk" (flags 0xa, twoGbMaxExtentSparse type).
2014 06-27 T 10: 11:28.122 + 05:30 | Worker #1 | I120: DiskGetGeometry: reading the disk partition table
2014 06-27 T 10: 11:28.138 + 05:30 | Worker #1 | I120: DISK: disk ' E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk.vmdk ' has UUID 60 c2 00 90 fd b7 14 db - bc f1 f9 76 cc 7 20 8 b '
2014 06-27 T 10: 11:28.138 + 05:30 | Worker #1 | I120: DRIVE: OPEN "E:\SOASTA\CloudTest Lite. vmwarevm\Virtual Disk.vmdk" Geo (41610/16/63) BIOS Geo (2610/255/63)
2014 06-27 T 10: 11:28.325 + 05:30 | Worker #0 | I120: DISKUTILWIN32: DiskUtilW32IsATASSDDevice: reported = 0 speed
2014 06-27 T 10: 11:28.559 + 05:30 | Worker #1 | I120: DISKUTILWIN32: DiskUtilW32IsATASSDDevice: reported = 0 speed
2014 06-27 T 10: 11:28.559 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: DISC: discs of opening had ms 858.
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: TimeTracker host at the conversion rate of comments 4745597640 to 1994989000Hz--> 0 to 1994989000 Hz
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: TimeTracker host to comments ((x * 2147483648) frequency conversion > > 31) +-4745597640
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: timeTracker.globalProgressMaxAllowanceMS: 2000
2014 06-27 T 10: 11:28.714 + 05:30 | VMX | I120: timeTracker.globalProgressToAllowanceNS: 1000
2014 06-27 T 10: 11:28.730 + 05:30 | VMX | I120: USB: initializing 'Virtual Hub' backend
2014 06-27 T 10: 11:28.730 + 05:30 | VMX | I120: USB: initialization backend 'generic '.
2014 06-27 T 10: 11:28.761 + 05:30 | VMX | I120: USBGW: writing arbitrator op: 15 len:4
2014 06-27 T 10: 11:28.761 + 05:30 | VMX | I120: USBGW: writing arbitrator op: 0 len:4
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USBGW: writing arbitrator op: 27 len:79
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USBGW: writing arbitrator op: 13 len:19
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USB: initialization backend "Virtual HID."
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USB: 'Remote control' backend initialization
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: RemoteUSBVMX: retrieved hostId [44 45 4 c 4 c 56 00 10 50 - 80 34 c6 c0 31 42 53 4f]
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: RemoteUSBVMX: min:15 current version: 16 of the Protocol
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: RemoteUSBVMX: no delay parameter is set to TRUE.
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USB: 'Virtual Mass Storage' backend initialization
2014 06-27 T 10: 11:28.777 + 05:30 | VMX | I120: USB: "Virtual CCID" backend initialization
2014 06-27 T 10: 11:28.777 + 05:30 | sensorThread | I120: VTHREAD start thread id 8 'sensorThread' host 3920
2014 06-27 T 10: 11:28.792 + 05:30 | VMX | I120: USB CCID: could not establish context: SCARD_E_NO_SERVICE (0x8010001d).
2014 06-27 T 10: 11:28.792 + 05:30 | VMX | I120: USB CCID: could not establish context: SCARD_E_NO_SERVICE (0x8010001d).
2014 06-27 T 10: 11:28.792 + 05:30 | VMX | I120: USB: initialization backend "virtual Bluetooth."
2014 06-27 T 10: 11:28.792 + 05:30 | VMX | I120: USB: "Virtual Audio" backend initialization
2014 06-27 T 10: 11:28.792 + 05:30 | usbCCIDEnumCards | I120: VTHREAD start thread id 9 'usbCCIDEnumCards' host 2876
2014 06-27 T 10: 11:28.792 + 05:30 | usbCCIDEnumCards | I120: USB CCID: map enum thread is created.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: skip the drive bracket to the file (E:\SOASTA\CloudTest Lite) vmwarevm\CloudTest Lite.vmx.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: skip the drive bracket to the file (E:\SOASTA\CloudTest Lite) vmwarevm\Virtual Disk.vmdk.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: jump drive for files (disk Lite. vmwarevm\Virtual E:\SOASTA\CloudTest 2.vmdk) carrier.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: skip the drive bracket to the file (E:\SOASTA\CloudTest Lite) vmwarevm\CloudTest Lite.vmsd.
2014 06-27 T 10: 11:28.855 + 05:30 | VMX | I120: USBGW: skip the drive bracket to the file (E:\SOASTA\CloudTest Lite) vmwarevm\CloudTest Lite.nvram.
2014 06-27 T 10: 11:28.855 + 05:30 | usbCCIDEnumCards | I120: USB CCID: could not establish context: SCARD_E_NO_SERVICE (0x8010001d).
2014 06-27 T 10: 11:28.902 + 05:30 | VMX | I120: MKS PowerOn
2014 06-27 T 10: 11:28.902 + 05:30 | MKS | I120: VTHREAD start thread id 1 "mks" host 2880
2014 06-27 T 10: 11:28.902 + 05:30 | MKS | I120: Thread MKS is alive
2014 06-27 T 10: 11:28.917 + 05:30 | mksInput | I120: Host Id 10 "mksInput" start thread 336 VTHREAD
2014 06-27 T 10: 11:28.917 + 05:30 | the mouse | I120: VTHREAD start host to the 'mouse' 11 3912 thread ID.
2014 06-27 T 10: 11:28.917 + 05:30 | kBh. I120: VTHREAD start host to the 'kbh' 12 1292 thread ID.
2014 06-27 T 10: 11:28.917 + 05:30 | MKS | I120: MKSWin32: recording of the window of upper level (0x2061c) to receive a notification of change of session.
2014 06-27 T 10: 11:28.917 + 05:30 | MKS | I120: Unable to load library D3DX9.
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: MKS-RenderMux: RenderOps collection caps...
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: KHBKL: impossible to analyze KeyString to: "
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: MKS-RemoteMgr: default display name: CloudTest Lite
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: MKS-RemoteMgr: Configuration of VNC to the virtual machine configuration file loading
2014 06-27 T 10: 11:28.933 + 05:30 | MKS | I120: FILE: FileCreateDirectoryRetry: no reproducible error (C:\ProgramData\VMware): cannot create a file when that file exists already (183)
2014 06-27 T 10: 11:28.933 + 05:30 | VMX | I120: VLANCE: send the cluster threshold is 80, size = 2 recalcInterval 2 ticks
2014 06-27 T 10: 11:28.933 + 05:30 | VMX | I120: VMXNET: send the cluster threshold is 80, size = 2 recalcInterval 2 ticks, dontClusterSize is 128
2014 06-27 T 10: 11:28.948 + 05:30 | VMX | I120: NetPkt: checksum cycles/kB: asm1 = 70 C = 821 asm2 = 391
2014 06-27 T 10: 11:28.948 + 05:30 | VMX | I120: NetPkt: copy and cycles/kB summing up: C = 473 asm1 = asm2 934 = 411
2014 06-27 T 10: 11:28.948 + 05:30 | VMX | I120: Chipset version: 0 x 17
2014 06-27 T 10: 11:28.979 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: Msg_Post: error
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: [msg.disk.slavenomaster] The IDE (disks/CD-ROM) configuration for the device is incorrect. It is an IDE slave with no master to ide0:1. This configuration does not work in virtual machines. Move the disk/CD ide0: 1 to ide0:0 using the configuration editor.
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: ----------------------------------------
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: MsgIsAnswered: use builtin default 'OK' as the answer to "msg.disk.slavenomaster".
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: Module DevicePowerOn market failed.
2014 06-27 T 10: 11:29.042 + 05:30 | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0
2014 06-27 T 10: 11:29.057 + 05:30 | MKS | I120: MKS PowerOff
2014 06-27 T 10: 11:29.057 + 05:30 | MKS | I120: Fate of thread MKS
2014 06-27 T 10: 11:29.057 + 05:30 | usbCCIDEnumCards | I120: USB CCID: enum output card wire.
2014 06-27 T 10: 11:29.057 + 05:30 | VMX | I120: ide1:0: numIOs = 1 numMergedIOs = 0 numSplitIOs = 0 (0.0%)
2014 06-27 T 10: 11:29.057 + 05:30 | VMX | I120: Closing of disc ide1:0
2014 06-27 T 10: 11:29.369 + 05:30 | VMX | I120: ide0:1: numIOs = 1 numMergedIOs = 0 numSplitIOs = 0 (0.0%)
2014 06-27 T 10: 11:29.369 + 05:30 | VMX | I120: Closing of disc ide0:1
2014 06-27 T 10: 11:29.884 + 05:30 | VMX | I120: AIOWIN32C: asyncOps = 4 listening = 176 bufSize = 0Kb fixedOps = 0 sgOps = 2 = 1 sgOn
2014 06-27 T 10: 11:29.884 + 05:30 | aioCompletion | I120: Thread AIO treated 4 finishes
2014 06-27 T 10: 11:29.899 + 05:30 | VMX | I120: FILE: FileDeletionRetry: not reproducible error (E:\SOASTA\CloudTest Lite. vmwarevm\CloudTest Lite.vmx ~): the system cannot find the specified file (2)
2014 06-27 T 10: 11:29.946 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:1222]: VMAutomationPowerOff: power off the power.
2014 06-27 T 10: 11:29.946 + 05:30 | VMX | I120: Policy_SavePolicyFile: not valid for function arguments.
2014 06-27 T 10: 11:29.946 + 05:30 | VMX | I120: PolicyVMX_Exit: could not write policies: 15.
2014 06-27 T 10: 11:29.946 + 05:30 | VMX | I120: WORKER: asyncOps = 2 maxActiveOps = 2 maxPending = 0 maxCompleted = 1
2014 06-27 T 10: 11:29.946 + 05:30 | WinNotifyThread | I120: WinNotify outgoing wire
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Past vmx/execState/val of poweredOff
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0
2014 06-27 T 10: 11:29.962 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:4024]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error
2014 06-27 T 10: 11:29.993 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:3985]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014 06-27 T 10: 11:29.993 + 05:30 | VMX | I120: Past vmx/execState/val of poweredOff
2014 06-27 T 10: 11:29.993 + 05:30 | VMX | I120: VmdbPipeStreamsOvlError could not read: (109) the tube was completed.
2014 06-27 T 10: 11:29.993 + 05:30 | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 / "-(32)
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: VMIOP: output
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:861]: VMAutomation_LateShutdown()
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: Vix: [2868 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: VMX VMDB Flushing connections
2014 06-27 T 10: 11:30.055 + 05:30 | VMX | I120: Exit VMX (0).
2014 06-27 T 10: 11:30.102 + 05:30 | VMX | I120: AIOMGR-S: o stat = 4 r = 12 w = 0 I = 0 br = 196608 bw = 0
2014 06-27 T 10: 11:30.102 + 05:30 | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.
2014 06-27 T 10: 11:30.102 + 05:30 | VMX | I120: FileTrack_Exit: fact

Hi Vicky_27and welcome to the VMware communities!

Your virtual machine has an advanced configuration option that will remove the error messages, which would make things a bit confusing. Your first priority should be to enable this option, unless you have a very good reason to need to remove the error messages.

Close VMware workstation. Navigate to the folder of the virtual machine (E:\SOASTA\CloudTest Lite.vmwarevm) and search for the configuration of the virtual machine (CloudTest Lite.vmx) file. (You may have to configure Windows Explorer to show file extensions.) Open it in Notepad or your favorite text editor. Find the line that says:

msg.autoAnswer = 'TRUE '.

and remove this line. Save the file and quit Notepad.

Who is will fix the immediate problem, but he should at least allow VMware Player to show you an error message explaining why he wasn't. If you turn on the virtual machine now, you should see the error:

The IDE (disks/CD-ROM) configuration of the device is incorrect. It is an IDE slave with no master to ide0:1. This configuration does not work in virtual machines. Move the disk/CD ide0: 1 to ide0:0 using the configuration editor.

So, to fix the problem, you can use the player to change the settings of the virtual machine. Choose the virtual hard disk to IDE 0:1 (the one with the name of the disk file virtual 2.vmdk), click on the Advanced... button in the bottom right and change the virtual device node of IDE 0:1 to IDE 0:0. Save the configuration and power on the virtual machine.

I hope this helps!

--

Darius

iCloud drive has a power symbol in it

The drive icon iCloud in the finder on my iMac has a electric (lightning) enter the symbol in this document, why?

This symbol?

I'm see it occasionally, if files on iCloud drive do not complete synchronization and are showing a progress bar.

I've not seen this icon explained in a any Apple document, but it seems to indicate than iCloud drive cannot synchronize. Usually, it will simply help restart the Mac to launch the process of iCloud again.

Satellite L40 - 15G has no power and no light

Hello

I have a Toshiba Satellite L40 - 15G. The keyboard was very dirty, so I followed the online instructions to remove it:

Removed the cover that is over the ram and the wireless card has had and took off the two screws now the keyboard (in fact only one is under that cover, the other is on the right...

I managed to remove the keyboard nicely and mount everything back together...

Once I plugged the phone into the charger, even when no light appears and computer does not start!

Any idea what could have gone wrong?

Thank you

Hi mate

Have Hmm you checked the memory modules?
Please check if the modules are placed correctly.
You should also check if you connect the keyboard to the motherboard in the right way.

Sorry mate but it is difficult to say what s going on here maybe you damaged something during the removal of the keyboard.

Apple pencil has a power button?

Apple pencil there a way to turn it on when you need it and able to power off the power when not in use to save battery?

The pencil of Apple doesn't have an on/off switch. It uses very little current. He tries to stay connected via Bluetooth to your iPad Pro.

Use the pencil to Apple with iPad Pro - Apple Support

External monitor retina has no power for MacBook Pro

My external monitor retina stopped providing power to my MacBook pro (OS 10.10.2) and so will not come. I tried to reset the SMC, but it did not help. I plugged the MacBook to external Retina to another (same model) and it works fine. I unplugged everything, plugged the screen on a multiple power outlets different without success. I plugged the screen on a different MacBook and encounter the same problem - no power. The problem seems to be in the monitor, no not the computer. Is there a reset of the monitor or something else, that I can do?

Hello sh5345,

Thank you for using communities of Apple Support.

Looks like you have isolated well enough the issue of power to a problem with the display. You can take a look at this link for your technical support options to get repaired display.

Poster Support - Support contact Apple

Concerning

HP mini 1109tu does not illuminate and has its power led flashing

Well I just got my Bill Mini of the day the following day and while they were inspecting it this morning the power led flashes and it won't turn (even on the battery mode).

[IMG] http://i168.Photobucket.com/albums/u171/Arnaehl/img_96221_hp-1000.jpg [LINE]

Will or may someone help me solve this. I can't bear to look at my dead minis.

Thanks in advance.

HP mini 1109tu

Hello

Arnaehl wrote:

Well I just got my Bill Mini of the day the following day and while they were inspecting it this morning the power led flashes and it won't turn (even on the battery mode).

[IMG] http://i168.Photobucket.com/albums/u171/Arnaehl/img_96221_hp-1000.jpg [LINE]

Will or may someone help me solve this. I can't bear to look at my dead minis.

Thanks in advance.

Try a hard reset.

Disconnect the electric plug. Remove the battery.

Press and hold the power button for 15 seconds.

release the power button.

Plug the AC adapter.

Press the power button.

Best regards
ERICO

Pavilion dv7: HP Pavilion dv7 has no power even when plugged

My laptop battery ran out today and would not take a load... I checked all the cord etc. and it is the power of the laptop, but now the battery is completely dead and the computer is also dead even when it is plugged into an AC. I've deleted and reinstalled battery... no help.

Is this a battery problem? If it was, then, why the computer would not work when plugged in the AC?

Any help would be appreciated...

The first thing to try is a hard reset as follows:

(1) remove the battery and unplug the DC power adapter.
(2) press and hold the power button for more than 15 seconds.
(3) plug the DC power adapter (leave the battery for now)
4) press the power button

If that produces no positive results, then continue with the following troubleshooting instructions.

Is there a light power light on the laptop when the piower adapter is connected and connected to a domestic supply?

If this isn't the case, then the laptop adapter may have failed and is unable to charge the battery or power the laptop on its own.

Acts of power as a diagnostic power adapter LED and not lit is an indocation external power is not OK.

hp6520 has no power

Similar Questions

Maybe you are looking for