CPU stops whenever I have send a document to print.

Original title: problems printing

Every time I send an item to the printer the CPU turns off, but the article will be printed. I have to keep restarting the CUP. How can I solve this problem?

Hello

1. what operating system do you use?

2 did you change on your computer?

3. did you receive an error message?

4. What is the brand and model of the printer number?

5. what application you use to print?

6 is it off the computer when you try to print?

7. are you able to print the test page?

I suggest you follow the link and check.

Printer in Windows problems

http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

additional information on the issue to help you further.

Tags: Windows

Similar Questions

  • whenever I have send an email on my hotmail that it always freezes when I use firefox! the Explorer is fine. Why so much?

    whenever I have send an email on my hotmail my computer crashes when I use firefox! the Explorer is fine. Why so much?
    This began to happen 1 week ago.
    I tried to uninstall firefox a few times and it still does not work!
    does anyone have a solution?

    Hello

    Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    Also, try to bypass the cache

    Reload the Web page while bypassing the cache using one of the following steps:

    • Hold down the SHIFT key and click the reload with a left click button.

    OR

    • Press Ctrl + F5 or Ctrl + SHIFT + R (Windows and Linux)
    • Press command + SHIFT + R (Mac)

    If it does not help disable HWA used in firefox.

    You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
    • In the Firefox options window, click the Advanced tab, and then select 'General '.
    • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    • Now restart Firefox and see if the problems persist.

    In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Cannot use ehrn 'ask whenever I have send msg' other e-mail applications download

    There is no ' ask each time I have send a message "when you use other messaging applications. I downloaded a messaging app, and I could not use 2 sim at the same time.

    Hello!

    This is the normal behavior of the Android operating system. Nothing other than the built-in messenger app can use both SIM via the dialog box messages. All other applications will use the default SIM card, which can be selected in the settings (default SIM for other messagining applications). If you want to choose the SIM card for each message sent, you must use the built in application.

  • LaserJet CP1025 Color - PC system tray stops working whenever I have send a doc to the printer.

    LaserJet CP1025 colour connected via direct USB for WINDOWS Vista 32-bit. I have the latest drivers, applications, and firmware for the printer, but the system tray stops working whenever I print a document. I tried this on Windows 7 via USB and get the same problem. Why does this happen?  I have another printer connected to the PC and I deleted all other HP drivers so that they don't interfere with the laserjet.

    Thanks for the update. I also found another thread where a lot of troubleshooting has been done, but the problem persists or is fixed only to reproduce:

    http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/LaserJet-CP1025nw-HP-system-tray-has-stopped-working/TD-p/1226639

    I noticed it happens on XP, Vista and 7. I recommend updating the firmware first (if you have not done so) by going here:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86491-5&CC=US&DLC=en&LC=en&os=4062&Product=4052957&sw_lang=

    In addition, in the printer preferences, disable bidirectional printing, which is located by clicking right on pinter > choose Print Properties > click on the ports tab > uncheck bidirectional printing.

    Let me know if either of those who help.

  • Get the 'error' dialog box and the 'sign in' box whenever I have send/receive. Mail is undefined to where I should have to open a session.

    Windows Mail box 'task' representing errors and the windows logon box appears.  Mail is not configured so that I have to enter a login and password.  These boxes appear whenever I select the send/receive.  This just started happening 2 days ago.  Laptop stops each day, and tried to restart.

    Hi KaciFe


    I suggest you use the troubleshooting steps described in the article to send/receive errors. Check id steps help you.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

     

    I hope this helps.

  • Why do I get an error POP 3 whenever I have send an email from the web site of my company?

    original title: why do I get a pop 3 error every time when I send an email on my company website?

    I have a link contact us on the web site of my company. When you click on it you will get my email address or phone number. When I try

    Send an email to my email address I get pop 3 mistakes that will prevent my email sending. can you please

    This difficulty? is what is happening because I have free live hotmail and my ISP yahoo at & t?

    Please do not post in UPPERCASE. It is considered as shouting and rude.

    Ask here and include the complete error message you receive.

    Windows Live Solution Center Hotmail Forum
    http://windowslivehelp.com/forums.aspx?ProductID=1

  • My counter top is not allow me to edit the document that I saved. I use Window 8.1.  Whenever I have change the document and try to save, it appears not SAVE SAVE AS.  How can I fix?

    I'm working on a tax Organizer.  I have change the hit RECORD, but always SAVE document under appears and makes me choose the original and other files to choose.  How can I fix this?  I just like to be able to SAVE my change.

    Hi ju-chanf57837259,

    Please uncheck 'Show online storage when you save files' to ' Edit > Preferences > General '.

    Let me know if it helps.

    Kind regards

    Meenakshi

  • How can I delete my old username of email? It's a pain to have to check that the name is used whenever I have send an email!

    I forgot my password at one point so l had to create a new e-mail with a new password, but every time than email which is often and usually in a hurry he's have to don't forget to click on the name of active email or my email does not get sent because the old disabled/address is applied and my email is lost? Sorry, my question is so trivial compared to all of the techniques out there but l am a dinosaur! l

    I'm moving post you on the forums of Windows for emai/networking, but if you are referring to Windows Live Mail, you belong here:

    Help and support Windows Live Mail (downloaded from http://download.live.com) can be found here - http://windowslivehelp.com/product.aspx?productid=15

    -steve

  • Whenever I have send an e-mail message in Outlook Express 6.0 e-mail me is returned as non-deliverable.

    I was using Outlook Express 6.0 and Hotmail to almost always.  Now for the last three weeks or so every time I send an email with some sort of attachment, it is being bounced me marked undeliverable for some reason any.  It's really frustrating because this has never happened before, and there are things I want to send.  I'm not sending unnecessary stuff, so I don't understand why this is happening.  Help, please.

    Thank you Cathy

    original title: undeliverable notice

    Thanks for your advice, but I tried the antivirus scan and that was not the problem.  But I corrected the situation.  I did go back to Internet Explorer as my default browser for my outlook express.  In this way, I was able to send my emails once more.  But I still couldn't send any of my hotmail.  While out hotmail via Firefox, I deleted Firefox from my computer and now I can send emails from my hotmail as well.  I guess it was something to do with Firefox that was causing the problem.  Thanks for your time and your efforts on my behalf.

  • I have trouble getting documents to print. My printer shows but is not printed and I have problems to open the documents. What should I do?

    My printer will print a demo and report, but freezes when I try to print a document or any other task. Most of the time when I try to open a document he invites me to open or save and when I select open it momentarily off and then immediately prompts you to open or save again. It does again and again and never opens. When I select record it indicates that the file already exists. I tried to unplug the computer and the printer and restart their but the problem persists. What can I do?

    Hello, Jsraine,

    To rule out malicious software, restart your computer and start typing the F8 key.  Select Mode safe mode with networking.  Disable the system restore where the malware is known to hide.  Re-activate when you are finished.

    How to turn on and off on system restore in Windows XP

    http://support.Microsoft.com/kb/310405

    Download the following tool and run a scan complete

    http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

    When you're finished, restart Windows

    Start > type CMD

    Click on CMD and type sfc/scannow

    Press enter

    Note: There is a space between sfc and / scannow

    When you are finished, while remaining in the CMD window, type chkdsk /f /r

    Press enter

    You will see a message about the volume must be locked and you want to monitor during the recovery?

    Press y and press enter

    Restart the computer for the scan at startup

    When you are finished, you will find the results in Event Viewer > Windows Logs > application log

    Look for Winninet to see the results

    Start > type Services.msc

    Press enter

    Scroll down to print spooler

    Click with the right button on spooler and select stop

    Wait for Windows to stop the spooler

    Window close services

    Start > Control Panel > printers folder

    Right-click on the printer, and then select open

    You see all pending print jobs?

    Click the printer menu, and then select Cancel all Documents

    Close printers folder

    Start > right click on computer

    Select manage

    Select Device Manager in the left index

    Click on the + sign next to the IEEE... compatible printer

    Right-click on the printer and select uninstall

    Click on the + sign next to imaging devices

    Right-click on the printer and select uninstall

    Click on the + sign next to Bus USB controllers

    Right-click on the printer and select uninstall

    Close Device Manager

    Restart the computer

    Windows will reinstall drivers on reboot

    Go to the manufacturer's website and search for updated drivers

    Open the Services window

    Scroll down to print spooler

    Click with the right button on spooler

    Select restart

    Wait for Windows to start the spooler

    Close the Services window when you are finished

    Try printing again

  • WordPerfect X 6 stops working when you submit a document to print. WPX6 works fine on other PC configured the same as this one.

    This problem occurs on one of the workstations Dell 790 10. All the Dells are configured the same, and all have the same version of Wordperfect installed. It's the only workstation that will not print a document WP. MS Office 2010 products have no problem with printing on this machine. We have tried several things to solve the problem - reinstall WP, change compatibility mode, modify the user accounts on this computer, test printing documents of WP on other similar work positions (with no problems), etc. Any advice or assistance would be greatly appreciated. Really, we do not want to rebuild this box.

    Thank you

    Bill

    Hi Bill,

    Thanks for posting your query in Microsoft Community.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    I suggest you try the steps from the following link:

    000003546 - resolution of the printing problems with WordPerfect®
    http://Corel.force.com/index/articles/en_US/Master_Article/754014-troubleshooting-printing-problems-with-WordPerfect

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

    If the problem persists, then I suggest you to post in support of corel.
    http://Corel.force.com/support?lang=en_US

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  • Annoying Pop - Up When you send the document to the printer

    Whenever I have send a document to the printer, I get a pop up telling me that the document has been sent to the printer.  This feature can be disabled?

    Give it a try and see if it helps.

    http://www.windowsitpro.com/article/configuration/how-can-i-disable-the-printer-popup-message-

    I hope this helps.

    Check out this link: 404 error: Page not found

    I think that something in your post (because the text is correct for the link, the hyperlink itself, it is what is broken) dropped the "-" at the end.

    This link (<-- click="" there)="" i="" believe="" is="" what="" you="" were="" going="">

    Well, a little dated, who knows?  Might work.

  • How can I send my document to an e-mail message for 2 people to sign?

    I try to send a document by e-mail to the customer.  I need two people to sign the document but there is only one address.  Whenever I have send for signature, he returned with a single name in these two areas.  I'm frustrated and I'm sure that my clients are also.  Help!

    Hello Conans17733101,

    You can enter the same e-mail twice to send the document. When the first signatory signs the document, once again an e-mail is sent for him to sign as a second signatory.

    -Usman

  • Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

    Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

    If a shortcut is used while Firefox is already open the error will not occur.

    For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

    Hope this helps.

    Olivier

  • Cannot delete definitely read e-mails, they keep re appearing in google mail whenever I have reconnect. It semms to store. How can I stop this?

    Cannot delete definitely read e-mails, they keep re appearing in ggogle mail whenever I have reconnect. It semms to store. How can I stop this?

    original title: delete old messages

    Hello

    In dealing with the problem with Gmail, I suggest you to contact Google support for assistance:

    http://support.Google.com/mail/bin/request.py

    Hope the helps of information.

Maybe you are looking for

  • icloud evil

    Hello I have 5s and ipad iphone 4 but I can not enter with my apple ID, unfortunately this I phone is for one of my relatives who died last month and I want to use These phones. the information of the two are not important for any of us, we just want

  • Calendar week - expand all the day pane

    In week view calendar how can widen the pane day everything upstairs to show all my events without scrolling? IM using 10.11.2 El Capitan, calendar 8.0 Thank you!

  • How can I configure the GPIB Tektronix tds2024 he is detected by MAX

    I try to connect the Oscilloscope Tektronix of TDS2024 to use in LabView. I use the GPIB port. I have to do something with the TDS2024? Or it should automatically detect it. I tried 2 different cables and are detected by the LabView "Measure & Automa

  • Extraction of the BIS device, blackBerry smartphones

    Hello I bought a "BOLD" which has already been registered for the former owners of BIS with O2. The seller is ignoring me (it has been 2 weeks and countless emails) and O2 does not remove the device from the BIS for me I need them to remove it so tha

  • How to fix the problem of integration and fix the Device Manager.

    Original title: xp mode only displays basic Hd Installed and established the Vpc and run virtual pc. Now restart Vpc indicates there is a problem with integration, but continues to load the Vpc. Another problem is C drive is the only visible partitio