CPU temp is-128C after the resumption of the mode S3 Sleep

Similar Questions

• Problem reading SD card after the mode reader 'sleep' Portege R500 SP1

  Hi all

  I still have the problem, that my new Portege R500 with Vista SP1 does nor react when reading / writing on a SD card. This only happens when the SD card is inserted and I wake the R500 from his sleep. All read or written in the SD card will lock the PC and the R500 must be turned off hard. I tried this with different SD cards with always the same result. The R500 was freshly installed from the recovery DVD and even installing from a DVD SP1 Microsoft at any time has the same exact behavior. All the drivers are up to date, Bios 1.60. I also tried to remove the entry in Device Manager and reinstalled.

  I found on the Microsoft site a patch, that describes exactly this issue: [http://support.microsoft.com/kb/936825 | http://support.microsoft.com/kb/936825]. But this patch cannot be installed under Vista SP1. Microsoft says that it is already included in the Vista SP1. But it still does not.

  Any other idea? Or what I have to live with it?

  Best regards
  Stefan

  Hello Stefan

  I can imagine that this problem is quite annoying for you, but otherwise, you can disconnect SD card when you have no more need. I can't imagine that it must be inserted at all times.

  I can imagine there are a few conflicts between the patches from Microsoft and Toshiba driver but such bugs should be fixed by some Toshiba updates or hotfixes Microsoft. What to say? I'm afraid at the moment that you must live with it.

  By the way: post please exactly the model of mobile number and give some info on the SDCard (capacity). Perhaps someone with the same model laptop and the same card can test and view the results.

• After the release of sleep I get a message saying: "your computer is currently locked" after 30 seconds.

  original title: disorders to restart the PC after the mode "Eve"

  I have a laptop with Windows Vista Home Premium installed. I feel in pretty serious trouble when I try to turn on the PC again after putting in mode 'sleep' (or after it is disabled due to low battery). The sequence of events following the bifurcation is as follows:

  1. I turn the PC back on.
  2. a message appears on the screen after about 30 seconds saying 'your computer is currently locked' and there nothing else do.
  3. impossible to do anything else, I force close to the PC.
  4. I turn it back on and start the PC in "safe" as mode indicated in the display.
  5. when the process is complete, I complete the secure mode by turning off the PC.
  6. I turn the PC back on. It asks me to enter the password, and the rest comes on as it should.

  So I can go back to normal after this 6-step process is completed, which is quite annoying and refused to Office 2007 as scary because even this process did not work last week that my PC has become impossible to connect to the wireless network at home, at work, etc and I was able to use my PC again only after a system recovery which was a nice surprise for me.

  Any help would be much appreciated.
  Kind regards
  Bekaroglu Bulend

  Dear James,

  Thank you for that comprehensive answer. I apologize for my answer, that I was busy with other things and forgot this issue for now. First of all, 1Utilisez mode"still works and that's how I'm going to return to normal operation again. It does not eliminate the problem, however. I have not yet tried the methods mentioned by you. However, I did something else as follows:
  1. I removed the password from my account (I am the administrator)
  2. I left my laptop to turn off because of low battery
  3. I restarted the laptop

  And I managed to find a normal operation. I intend to use my laptop without password, I don't want to face the same problem again. (I guess that the problem will resurface if I started using a password again.)

  In both instances separated last week, I noticed also that my computer started a validation file of three steps and the process of compacting the files immediately after I put on. They went well. I'm not sure, however, they were of no help to solve the problem. My feeling is that they were not.

  Thanks again for your time.

  Kind regards
  Bekaroglu Bulend
  Istanbul, Turkey

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• ulitmate local Vista only after the mode "sleep" loses the IP address each time.

  Ulitmate Vista wired ethernet.  After the mode 'sleep', 'local only' on awake.  Loses to IP address each time.  IP address needs to be reset.

  Hi C.Jaye,

  You can check out the following link and try the steps to solve the problem:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/f21fcdda-4372-469d-b983-f4bd50d7f81d

  You can also read the following article and check if it helps:

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HDD turns off after the mode 'sleep'?

  I would like to know if the hard drive would turn out or not after the mode 'sleep'.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  The computer do not hibernate unless it stops the disc after writing the hibernation file.

  Mode for similarly low-power stop discs 1

• Windows 7 hangs 3.5 minutes after the mode "Eve"

  Install Windows 7 upgrade from vista. Everything works well, but crashes after the mode 'sleep'. takes 3.5 minutes to thaw. Have a hp pavilion a6707c. Vista was faster to return to that.

  Don't know if this helps, but after I disabled the hybrid sleep I can hibernate and that it only takes 35-40 seconds to resume and everything seems to work fine.

• CPU on nearly 100% after the last update of Adobe CC

  CPU on my MBP runs to nearly 100% after the upgrade to the latest version of Adobe CC. autonomy down and MBP heats massively... CCXProcess killed in the Task Manager, but recharge automatically. Very annoying...

  I would advice you Contact Customer Care as a troubleshooting technique may be necessary.

• Firefox 36.0.4 does not go to the internet after the release of sleep

  My FF won't go to the internet after the resumption of sleep in specific situations to my use of power cord. I have Windows 7 on my laptop. I'm using FireFox 36.0.4. I searched the problem and found a person of 2013 with exactly the problem and I can reproduce my problem the exact way of sames like this person mentioned in their support of Mozilla question. Unfortunately, there is no effective solution to this problem. My FF fails to answer some specific situations:

  It seems to be when I have my laptop plugged in while using FF. If I close the lid to put to sleep, when I reopen the lid it later, that it does not connect to any websites. I can click on things on the page, so it is not completely frozen. I can search on google, but it never connects to a page. It has circular availability icon and 'connection '. It is not stop search or give an error message. I have to close off FF and completely shut down my computer and restart to clear the problem. If I try just close Mozilla and again I get an error message "already underway but enforcement does not." the old process of FF must be closed before opening a new window", but I do not have an open window and regardless of how many times I close and try to reopen, I get this message even; If I don't have the power supply cord is plugged in, I don't think not that I have this problem.

  I met the same problem, but it happens on a desktop running windows 7 and not another desktop running windows 7 so I think that there is another question. I can sometimes get around simply refresh the page he fell asleep on with the arrow curved in the address bar but would like to permanent an easy solution.

• L750D-1DQ satellite - black screen after the mode 'sleep'

  My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
  The screen is very dark, I can't seem to clear up.

  I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
  When I restart, the screen works again.

  What must I do, so I can start to work after returning from the mode "sleep"?

  Hello

  You are able to change the brightness in Power Options Win 7?

  Check this box:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  You can choose a power plant that is enabled in the profile of power you use.
  You will see the option to adjust the brightness of the plan.
  Set the control to the right to increase the brightness. Do this for setting battery and area setting

  In addition, you should go to advanced-> display settings
  Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running

• T520 not resumed after the mode 'sleep'.

  Hello

  When I close the lid of the machine goes into mode 'sleep'. When I open it back it does not. This happened 2 days ago, and before that everything worked very well. I can hear the fans/hdd from when I open the cover, but the statys display dark and the power button flashes. No matter what I press it does not appear from the mode "Eve". I have to press and hold the power button to force the reboot the machine lose all my currently open applications and documents. Any suggestions on what could be the problem and a fix?

  Thank you!

  Thanks for your reply. I solved the problem, but I'm not exactly sure how. I think that it started after I used it on battery until what drain you completely. It was working fine before that. I have lots of update on the system since the Lenovo Update Manager, shut down the computer, took battery and AC and pressed the power button. All assembled again and booted up normally. Now everything works. I can close the lid causing the laptop to go to sleep and he took over when I open it. No more problems at startup.

• Black screen HP Elitebook 850 after the mode 'sleep'

  Hello

  I have a HP Elitebook 850, which is about 3 weeks old. It is running Windows 8.1 with most of the HP software, which is available for this model, installed.

  Once the laptop goes into mode 'sleep' may not wake up for some reason any. The screen remains black and seeing everything seems normal. The only thing to do is either ctr + alt + delete to restart or shutdown forced by using the power button.

  Any ideas?

  Best regards

  Has exactly the same problem.  Called HP support.  They said that I needed to downgrade the video driver I was using.

  Specifically they asked me to check the version of the video driver first:

  1. Start screen, type "Device Manager" and then click to open Device Manager.
  2. In Device Manager, expand "graphics cards".  There were two shown:
     Radeon (TM) AMD HD 8500/8700 M M
     Intel(r) HD Graphics Family
  3. They asked me to double click on the graphics card Intel.  The dialog box properties open;
  4. On the tab driver properties dialog box, check the Version of the driver.  Mine was 10.18.10.3379.

  HP support and then asked me to download an older version of the driver, 10.18.10.3316.  Here's how:

  (1) on the laptop in question go to hp.com;

  (2) in the Help menu of hp.com, click Download drivers;

  (3) search by product: Enter 'Elitebook 850 G1' and press Go.

  (4) multiple results will come to the top, select the one that says 'HP EliteBook 850 G1 Base model Notebook PC';

  (5) to select the operating system: "Windows 8.1 (64-bit);

  (6) from the Index to download, select 'drivers - Graphics ';

  (7) tΘlΘcharger "Driver Intel video and control panel (International)" version 10.18.10.3316, November 15, 2013.  It's a big download, 158 MB.

  Once the download is complete, double-click the downloaded file to install it.  If you get a dialog box warning you install an earlier version of the driver that is currently installed, click Yes to continue.

  After you have installed the version 10.18.10.3316 driver, I restarted the laptop.

  To test whether the fix had worked I open a text editor and entered the text without saving it (it was to see if the unsaved document would still exist after that the laptop computer woke up from his sleep).  I then put the laptop to sleep by closing the form.  When I opened it again the light behind the power button has been slowly pulsed on and outside and the screen was black.  Based on the presented power button the laptop out of fashion 'sleep' and return to the lock for recording screen in.  Once connected, I found that the unsaved document was still open for the laptop had obviously just slept and rather than restarted rewoken.

  I hope this helps.

• The VIsta calendar reminder is not pop up after the mode "Eve"

  Hello

  I had put a task reminder in the calendar from Windows Vista program.  But did not recall. I put usually PC mode 'sleep' when finished. So I tested if that did anything. So, I had an appointment for 12:15 and had reminder 5 minutes before.  Put the PC in 'sleep' to 12:00 and he works at 12:20, but the reminder of the calendar has no pop up, even after some time. It arises in place when I open the calendar program.  Even if instead of mode 'sleep', if I shut down the PC and start the reminder immediately opens. If "sleep" mode somehow put reminders in the sleep forever.

  Does anyone have idea about this bug?

  Thank you

  I don't know a solution. It does the same thing for me. I use the Outlook calendar. The Live, or Google Calendar likely would do anything as well.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• P2715Q, Windows size and location change after the mode 'sleep'

  Hey

  After that the monitor wakes up fashion 'sleep', all the windows are in the upper left corner and in different size just before going to sleep. It makes me crazy. Did not help. Found a few registry hacks key, but it can't be that difficult.

  I use following:

  View P2715Q Dell, Windows 10 Pro GTX 1070

  Everything is up-to-date.

  Really hope you can help me!

  #update 1

  It has something to do with how long the mode 'sleep'. I set the Sleep mode function 1 minute, whereas the display 'falling a sleep' and woke up after 30 seconds or more. Everything was in place.

  This isn't a question of monitor. It is a video card driver problem. Tiles from 1920 x 1080 uses two P2715Q sewn together by the video card driver to get the resolution of 3840 x 2160. So if the video card driver is slow to initialize the awakening from sleep mode, all open windows and icons are tossed at top left. We see this issue "tile" on AMD and Nvidia drivers. All you can do is to continue testing video card drivers latest when they are released.

  Workaround solution =
  * Spend 90% of your icons to the taskbar or the far left background
  * Close all open windows before allowing computer standby modes

• DVD - ROM drive not detected after the mode 'sleep'

  I have a HP DVD1170, and it works very well after starting.  After putting my computer in mode 'sleep' and then he wake up, my computer took in not recognizing that there is even a connected DVD player.  He is a recent problem. I got Windows 7 since the beginning of November, and the problem only happened last week.  The drive works again after the restart, but it is not recognized if I put the computer in mode 'sleep' again.

  Hello Neohippie7319,

  Thank you for your message.  You can also click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.