Problem reading SD card after the mode reader 'sleep' Portege R500 SP1

Similar Questions

• CPU temp is-128C after the resumption of the mode S3 Sleep

  Hello

  As says my title, my temp cpu bed-128 C after waking mode S3 sleep.

  This affects my fan control, and while not particularly dangerous, it is annoying as my fans are set to 100% and do not return to their modes of thermal cruise.

  However, when I restart my computer temperature readings are fine and the fans run in accordance with their respective temperature readings.

  The really weird thing is that as I get S3, I look at the temperature of my cpu and it reads 40 c (same as idle temperature), but this only lasts for about a second how the temperature reading goes up to C - 128, while my fans are working up to 100%, such as fans and temperature readings are pegged to their "extreme" until I restart the computer.

  I tried to close the temperature monitor and re run after S3 wake up without result. I also tried to launch a processor intensive task to see if that would record at least a change in temperature, also without success, the temperature reading remains pegged to c - 128.  Is it possible to correct the stray cpu temperature read during his awakening of S3, because it seems that the sleep mode S3 everything resets all leaving the cpu temperature sensors in limbo?

  Im running:

  Win Xp pro SP3 and Speedfan 4.45 (temperature monitor)

  2 GB of ram

  T8300 CPU @ 2.4 Ghz

  Card mother MS-9803 w/FRIEND BIOS 2.2

  O.K.

  After combing through the net re: the above question, I determined that the problem I see with the temperature monitor is only a superficial, but light always news, of a larger problem.

  I contacted the mfr of cpu and my cpu temperature is within specifications, even after the release of the S3 despite what said Speedfan.

  So the problem I have is not so much with the temperature of the cpu that the fact that my cpu is "spinning its wheels" after the exit of the S3 with cpu common use anywhere from 15 to 35% (via the Task Manager) with no visibly active application/process. .... IM thinking to start a new thread and the closure of it.

• ulitmate local Vista only after the mode "sleep" loses the IP address each time.

  Ulitmate Vista wired ethernet.  After the mode 'sleep', 'local only' on awake.  Loses to IP address each time.  IP address needs to be reset.

  Hi C.Jaye,

  You can check out the following link and try the steps to solve the problem:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/f21fcdda-4372-469d-b983-f4bd50d7f81d

  You can also read the following article and check if it helps:

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Problem with URL ReadyCloud after the installation of the FW 6.5 on RN312

  Hello

  After the update to the official FW 6.5, the URL of the ReadyCloud is always on "'https://readycloud-test3.netgear.com/client/en/welcome.html ' not on the production URL"

  What is the correct production URL?

  Thank you

  OK, it's a problem browser temporary files after the update, sorry!

  I have clean the temporary files IE11, now all URLS are corrected with links PROD. I have this url: https://readycloud.netgear.com/client/en/welcome.html

• HDD turns off after the mode 'sleep'?

  I would like to know if the hard drive would turn out or not after the mode 'sleep'.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  The computer do not hibernate unless it stops the disc after writing the hibernation file.

  Mode for similarly low-power stop discs 1

• Windows 7 hangs 3.5 minutes after the mode "Eve"

  Install Windows 7 upgrade from vista. Everything works well, but crashes after the mode 'sleep'. takes 3.5 minutes to thaw. Have a hp pavilion a6707c. Vista was faster to return to that.

  Don't know if this helps, but after I disabled the hybrid sleep I can hibernate and that it only takes 35-40 seconds to resume and everything seems to work fine.

• Hi, when I buy an annual service by my credit card, after the first month, for the next can I change the credit card?

  Hi, when I buy an annual service by my credit card, after the first month, for the next can I change the credit card?

  Hello

  You can change the billing information anytime before the next renewal. Please see the link below on how to update the billing information.

  Manage your creative cloud membership

  Hope this will help you.

  Kind regards

  Hervé Khare

• After the release of sleep I get a message saying: "your computer is currently locked" after 30 seconds.

  original title: disorders to restart the PC after the mode "Eve"

  I have a laptop with Windows Vista Home Premium installed. I feel in pretty serious trouble when I try to turn on the PC again after putting in mode 'sleep' (or after it is disabled due to low battery). The sequence of events following the bifurcation is as follows:

  1. I turn the PC back on.
  2. a message appears on the screen after about 30 seconds saying 'your computer is currently locked' and there nothing else do.
  3. impossible to do anything else, I force close to the PC.
  4. I turn it back on and start the PC in "safe" as mode indicated in the display.
  5. when the process is complete, I complete the secure mode by turning off the PC.
  6. I turn the PC back on. It asks me to enter the password, and the rest comes on as it should.

  So I can go back to normal after this 6-step process is completed, which is quite annoying and refused to Office 2007 as scary because even this process did not work last week that my PC has become impossible to connect to the wireless network at home, at work, etc and I was able to use my PC again only after a system recovery which was a nice surprise for me.

  Any help would be much appreciated.
  Kind regards
  Bekaroglu Bulend

  Dear James,

  Thank you for that comprehensive answer. I apologize for my answer, that I was busy with other things and forgot this issue for now. First of all, 1Utilisez mode"still works and that's how I'm going to return to normal operation again. It does not eliminate the problem, however. I have not yet tried the methods mentioned by you. However, I did something else as follows:
  1. I removed the password from my account (I am the administrator)
  2. I left my laptop to turn off because of low battery
  3. I restarted the laptop

  And I managed to find a normal operation. I intend to use my laptop without password, I don't want to face the same problem again. (I guess that the problem will resurface if I started using a password again.)

  In both instances separated last week, I noticed also that my computer started a validation file of three steps and the process of compacting the files immediately after I put on. They went well. I'm not sure, however, they were of no help to solve the problem. My feeling is that they were not.

  Thanks again for your time.

  Kind regards
  Bekaroglu Bulend
  Istanbul, Turkey

• Firefox 36.0.4 does not go to the internet after the release of sleep

  My FF won't go to the internet after the resumption of sleep in specific situations to my use of power cord. I have Windows 7 on my laptop. I'm using FireFox 36.0.4. I searched the problem and found a person of 2013 with exactly the problem and I can reproduce my problem the exact way of sames like this person mentioned in their support of Mozilla question. Unfortunately, there is no effective solution to this problem. My FF fails to answer some specific situations:

  It seems to be when I have my laptop plugged in while using FF. If I close the lid to put to sleep, when I reopen the lid it later, that it does not connect to any websites. I can click on things on the page, so it is not completely frozen. I can search on google, but it never connects to a page. It has circular availability icon and 'connection '. It is not stop search or give an error message. I have to close off FF and completely shut down my computer and restart to clear the problem. If I try just close Mozilla and again I get an error message "already underway but enforcement does not." the old process of FF must be closed before opening a new window", but I do not have an open window and regardless of how many times I close and try to reopen, I get this message even; If I don't have the power supply cord is plugged in, I don't think not that I have this problem.

  I met the same problem, but it happens on a desktop running windows 7 and not another desktop running windows 7 so I think that there is another question. I can sometimes get around simply refresh the page he fell asleep on with the arrow curved in the address bar but would like to permanent an easy solution.

• Black screen HP Elitebook 850 after the mode 'sleep'

  Hello

  I have a HP Elitebook 850, which is about 3 weeks old. It is running Windows 8.1 with most of the HP software, which is available for this model, installed.

  Once the laptop goes into mode 'sleep' may not wake up for some reason any. The screen remains black and seeing everything seems normal. The only thing to do is either ctr + alt + delete to restart or shutdown forced by using the power button.

  Any ideas?

  Best regards

  Has exactly the same problem.  Called HP support.  They said that I needed to downgrade the video driver I was using.

  Specifically they asked me to check the version of the video driver first:

  1. Start screen, type "Device Manager" and then click to open Device Manager.
  2. In Device Manager, expand "graphics cards".  There were two shown:
     Radeon (TM) AMD HD 8500/8700 M M
     Intel(r) HD Graphics Family
  3. They asked me to double click on the graphics card Intel.  The dialog box properties open;
  4. On the tab driver properties dialog box, check the Version of the driver.  Mine was 10.18.10.3379.

  HP support and then asked me to download an older version of the driver, 10.18.10.3316.  Here's how:

  (1) on the laptop in question go to hp.com;

  (2) in the Help menu of hp.com, click Download drivers;

  (3) search by product: Enter 'Elitebook 850 G1' and press Go.

  (4) multiple results will come to the top, select the one that says 'HP EliteBook 850 G1 Base model Notebook PC';

  (5) to select the operating system: "Windows 8.1 (64-bit);

  (6) from the Index to download, select 'drivers - Graphics ';

  (7) tΘlΘcharger "Driver Intel video and control panel (International)" version 10.18.10.3316, November 15, 2013.  It's a big download, 158 MB.

  Once the download is complete, double-click the downloaded file to install it.  If you get a dialog box warning you install an earlier version of the driver that is currently installed, click Yes to continue.

  After you have installed the version 10.18.10.3316 driver, I restarted the laptop.

  To test whether the fix had worked I open a text editor and entered the text without saving it (it was to see if the unsaved document would still exist after that the laptop computer woke up from his sleep).  I then put the laptop to sleep by closing the form.  When I opened it again the light behind the power button has been slowly pulsed on and outside and the screen was black.  Based on the presented power button the laptop out of fashion 'sleep' and return to the lock for recording screen in.  Once connected, I found that the unsaved document was still open for the laptop had obviously just slept and rather than restarted rewoken.

  I hope this helps.

• Computer won't turn on after the mode 'sleep'

  My computer acted funny lately when it goes into mode 'sleep', and I have to reboot it until I can do something new. I know I'm not the only one having this problem, I've read the other posts on this problem. Anyway, my keyboard has a sleep button that I brush occasionally, that causes all this to happen. However, I brushed it today, and instead to go just in a coma, the computer entered into mode 'sleep' (the light was orange, noise died down), then woke up to the top in a way where the fan on, but the light went off. I've forced to close and then turned back on. Now when I turn it on, the light and fan both going on, but the monitor remains off, and none of the lights on the keyboard lights up. Is there a simple solution to this, or it will need repairs?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems of wake the computer from sleep mode

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Hope this information helps.

• P2715Q, Windows size and location change after the mode 'sleep'

  Hey

  After that the monitor wakes up fashion 'sleep', all the windows are in the upper left corner and in different size just before going to sleep. It makes me crazy. Did not help. Found a few registry hacks key, but it can't be that difficult.

  I use following:

  View P2715Q Dell, Windows 10 Pro GTX 1070

  Everything is up-to-date.

  Really hope you can help me!

  #update 1

  It has something to do with how long the mode 'sleep'. I set the Sleep mode function 1 minute, whereas the display 'falling a sleep' and woke up after 30 seconds or more. Everything was in place.

  This isn't a question of monitor. It is a video card driver problem. Tiles from 1920 x 1080 uses two P2715Q sewn together by the video card driver to get the resolution of 3840 x 2160. So if the video card driver is slow to initialize the awakening from sleep mode, all open windows and icons are tossed at top left. We see this issue "tile" on AMD and Nvidia drivers. All you can do is to continue testing video card drivers latest when they are released.

  Workaround solution =
  * Spend 90% of your icons to the taskbar or the far left background
  * Close all open windows before allowing computer standby modes

• Problem writing to XML after the dialog box

  I use ScriptUI to create and update XML in a document (using the Document.XMLElements methods).

  Before opening a ScriptUI window, I can read and write XML without problem.

  But after opening a window with some ScriptUI resources, I can only read the existing XML BUT NOT WRITE!

  My write method is called by a key event:

  ...

  var myXMLRootNode = / * instantiated * /.

  ...

  myWindow.okButton = / * instantiated * /.

  ...

  myWindow.okButton.onClick = function() {myXMLRootNode.xmlElements.add (myTag, object)};

  myWindow.show ();

  ...

  It seems that the onClick callback works OK for reading (I can recover all existing values without problem), but not for writing.

  Any idea?

  Hey!

  Well, the thing is that you must close the dialog before first in writing in order to document.

  myWindow.okButton.onClick = function(){myWindow.close(1);};
  
  var myWin = myWindow.show();
  
  if(myWin == true){
      myXMLRootNode.xmlElements.add(myTag, object);
  }
  

  I hope that helps!

  --

  tomaxxi

  http://indisnip.WordPress.com/

• Satellite L855 - 14 p - USB ports do not work after the mode 'sleep'

  Heya guys,

  I have a strange problem today. The 2 USB inputs on the right side of the laptop (idk who is 2.0 or 3.0) does not work with the reason I can not perceive. These 2 guys are on different days, but in the same way. A month ago, I plugged the mouse USB wireless to one of them, then entered mode 'sleep'. When I came back, I discovered the work of mouse aint.

  Then I realized the port I plugged the key USB has no electiricity inside no more. I found it very strange and continuous without using the port of broken, until yesterday. Yesterday, I made the same mistake (a la mode "sleep" in a USB port plugged into the other port - work-) and I have re-opened, the 2nd port is broken in the same way, too. I've mastered Manager devices, regedit, but it has no use. This lead me to think his could be a hardware problem, but how can be possible? Is this a coincidence?

  Now, I have to use my 3rd and last port on the right side of the laptop with a USB duplicator.
  You have any ideas? Can it be a software problem?

  Understand this correctly? The USB ports mentioned don t work even after restarting a new laptop?

  In this case, it could be really a hardware problem
  But before talking about hardware problems, I recommend to recover the laptop using Toshiba recovery.

  Defining the notebook back to factory settings will help you identify the problem: If the USB ports wouldn't work, this s hardware problem.