CQ56-219WM: restoration of HP software

Similar Questions

• Same product key of Windows7 on different computers mobile, CQ56-219WM and CQ60-615DX. Is this true?

  I bought two laptops Compaq Presario used, a CQ60-615DX CQ56-219WM.  I used the ProductKey software to get the product key of Windows7 Home Premium for each machine.  The keys for the two machines were the same.  Is this good?  Can I depend on these keys, if I load Windows7 as part of a recovery for each machine?

  Paul_Tikkanenanswer is correct, because you can not use the HP OEM SLP keys that you retrieved from the computer to activate Windows under normal conditions. As Paul says, you can use the Windows product key, which is printed on the Microsoft COA affixed to the computer to activate Windows.

  However, there is another method that can be used to activate computers using the same HP OEM SLP key. This method requires the recovery of the HP OEM SLP key and HP OEM SLP certificate that was installed at the factory on the computers. The computer BIOS must also contain a table with HP OEM SLIC for the pre-activation works correctly. Please see HP Forum post "How to install Windows 7 without the disc" for more detials.

  Qoute;

  «1 b) using a locator key, however, is useful only if the product key of Windows 7 was printed on the label affixed to your PC, on the documentation that came with your PC, or sent by e-mail from Microsoft (Microsoft Certificate of authenticity).» Assuming that your computer came among computer makers of big brand... HP, Sony, Dell, Gateway, etc... as do more, it uses an OEM SLP of generic key "massive activation". Try to use this key by itself is not going to work. This OEM SLP key should be used with an OEM SLP certificate and an OEM BIOS with a good table SLIC.

  1 c) here's where ABR Beta with Windows 7 Support comes to the rescue. Follow the section 'How to use' ABR for Windows Vista for information and instructions on how to use ABR the steps listed for Vista as well apply to Windows 7. Run the backup 'activation' for 'backup' and record the OEM SLP key and the OEM SLP certificate. Save all of the ABR folder to an external location for later use. This will allow you to preactivate your installation of Windows 7 'clean' on the computer that you pulled the key and the certificate of. »

  Please click the White Star of KUDOS to show your appreciation

• Compaq Presario CQ56-219WM: Compaq Presario CQ56 laptop-CQ56 219WM - off System [73965989]

  I have a Compaq Presario CQ56 CQ56-219WM laptop

  He just started to ask for a password "Administrator" or "Power On" password

  After 3 tries, I get this message.

  Disabled system [73965989]

  What should I do?  Please help and thanks in advance.

  Hello

  Please enter:

  62643309

  Kind regards.

• BIOS password began to appear on a presario cq56-219wm laptop

  I work on a Presario CQ56-219wm who suddenly started asking for a bios password (enter the administrator password).  If I hit enter 3 times, it give me the code to 82026917.  I know it is a failure of motherboard the cause, can someone please give me the code to enter in this so I can reset the password in the bios?  Appreciate any help in advance.

  Try > 33984339

• Restore the Touchsmart software

  Updated my TouchSmart IQ507 vista computer to windows 7 Professional. Touchscreen still works, but most of the touchsmart software don't.  How can I recover it?  Thanks for any help!

  JRPT, welcome to the forum.

  Here are the specifications of the computer.  In the 'Software' section, it lists all the programs supplied with the computer.  It also shows the programs that you can restore from the recovery disks.  However, this means using the original operating system.  Once switch you to Win7, many value-added programs are not available.

  Please let us know if this solved your problem or not.

• don't restore dv9910us no software but whit a hp_recovery partition

  I formatted my Pavilion dv9910us and Parry xindows xp, xp do not work, I want to go back to vista, but I can find a doftware to restore my laptop, I have a partition named hp_restore I just need the software to get data from this partition, it takes to win xp

  cheers of the Argentina

  1.right - click on the "Computer" icon and select manage.
  2. This will launch the Microsoft Management Console.
  3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
  4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
  5. when the warning message appears, select 'Yes' – Reboot and it will automatically start in the D:\HP_Recovery Recovery Manager

• Pavilion laptop computer and complete factory restore vista and software

  Hello

  I got windows vista Home premium recovery problems using the HP recovery program to reinstall his condition factory built into my laptop.

  In the past I have successfully achieved this. This time this recovery allows me to set an admin password when it is installed, then it continues to install the software and crashes /freezes for a long time and remains in this State unless I have physically turn it off. I've now lost count how many times I experienced this.

  I tried to restore to the previous point - which will not work because there is no restore time too.

  Please can you kindly advise me on the above?

  My laptop are:

  HP Pavilion dv2915nr environment note book pc

  Windows Vista Edition Home Premium

  Concerning

  ALIEN1X

  The hard drive is bad and needs to be replaced. Newegg has a good promo going on right picked up now_just this HDD myself, $10 off with code of.

• How to restore the audio software for windows XP

  original title: Audio for windows XP software

  I must have accidentally uninstalled the program that runs the audio on my computer during the uninstallation of an another grosgrain. What should I do? I have absolutely no audio now! Is it possible I could still be on my computer somewhere? Is there a program I can dpwnload?

  I did this for your hardware in particular, from the Microsoft Update Catalog. Otherwise, he would never install them for you.

  The download link, then unzip it into a folder.

  Open Device Manager and right-click on this point, identical to the front. Choose update driver software.

  Browse my computer. Let me repeat. Have the disk. Browse.

  Find and double click on STWRT.inf in the extracted folder. Click ok then next and it will install.

  Updated link: https://rapidshare.com/files/452472406/SigmaTel_-_Audio_-_SigmaTel_High_Definition_Audio_CODEC.zip

  Enjoy.

• CQ56-219WM rebuilt for hard drive

  Machine of Windows 8 that uses my teenage son.    He tried to turn on one day and have absolutely nothing. Honestly, I don't know how, but we have managed to turn and started IMMEDIATELY by pressing F11 as recommended by HP (hoping to be able to rescue/restore, because we were the bad guys and did not create the hot spare when we bought the new machine).  The machine hangs and will do absolutely nothing when we try this approach.

  Suggestions please!  I might mention that my wife started having some problems with his machine, shortly after you install MINECRAFT on hers.  She has uninstalled and works very well since.  The reason that I mention that is because our son has MINECRAFT on the machine that we are discussing here.

  THANKS IN ADVANCE TO ALL!

  Hello

  Some of the things you can try:

  Hard reset: http://support.hp.com/us-en/document/c01684768

  Run a vast hard drive & memory tests, it will take time: http://support.hp.com/us-en/document/c03463381

  Wait for the results.

  If all tests pass, you could go for partition recovery in your system.
  But as it freezes, I don't see what is happening.

  Post back with the results,

• Win7 64 bit, System Restore deletes installed software and domain membership

  Hello, we (me and my colleagues) have a strange problem with some of our Pc.
  We have disabled the Systemrestore by policy.
  But in some cases STILL done system restore full and removes all installed Programms, also sets the Pc up to a point before the domain join.
  Data is not lost but they system is broken so the profile and we habe to reinstall.
  How this could happen? The Systemrestore is disabled, but still he managed to him and to crack the system.
  If you are looking for the settings for the Systemrestore, everything is disabled, also there is no restore point.

  I have not discovered yet what causes this or how to reproduce the error.

  I saw him only once, after i had started the system, I was aksed if I want to do a system restore and if you say yes, zam Programms everyone and everything disappeared.  Its happens on each Pc (Lenovo X 1, HP 2650, 8470).

  Some else had this problem or is some has a solution?

  Hello

  Please go to the Microsoft Community Forums.
   
  This problem would be better suited to the TechNet community.
  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
   
  Thank you.

• WIN8 system restore half uninstalled software trail

  Nice day

  Even though I know now that even if I don't get this problem, I don't think I'll be able to continue the trail... I need to fix this...

  I need to know how to be

  (a) delete the program files that were left when windows has a system restore point, leaving the half installed dreamweiver (Application Manager Adobe thinks it is always installed, but windows thinks that his party (it is not listed in the start menu, in Control Panel, under programs and features, I can't find an exe file associated with dreamweiver).)

  (b) download the files needed for this half install to a full install, so that I can continue the trail period, so that I can decide if worth paying for it.

  Unfortunately the chat support Adobe says that it is not covered by their support... (which I find strange that implementation could benefit them if I buy it...).

  Thank you!

  Adobe support is not really something they are proud.  Many here will be attest to that.  The WIndows restore cleaner does certain things, not everything that make installers.  Have you tried the cleaner CS yet?  If this isn't the case, that is where I would start.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Portege R100 - restore the system software

  I have a portege r100 that has been absent for repairs three times in the last two months. He has just returned to me and now blus screens through startup. I guess I now need to rebuild the operating system but have only a USB CD drive. I contacted the support help line which can not tell me where I can get a CD PCMCIA drive to rebuild the laptop (I have the CD). Any ideas on:
  -Where to get a CD player (in the United Kingdom)
  -Otherwise, how to perform the task.

  Thank you

  Hello

  I found this Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

  You will find a compatible readers and supported for R100.
  I recommend seeing for readers of this and find an online store that sells players.
  The other possibility is to order these parts from the Toshiba service partner.

• Compacq Presario CQ56-219WM: reset the cmos

  Password lost sysem Disable - 81937226-, delete, reset; You can suggset raise my laptop.

  @RickieAlan

  Enter: 34695808

  Kind regards

  DP - K

• Presario cq61: Compaq Presario CQ56-219WM system disabled

  Yes I booted up my Compaq presario cq61 and it askedvme a key administrator password it gives me is that 68487177 I do all my work on this computer could someone please help

  @joelucas311978

  Enter 77585179

  Kind regards

  DP - K

• boot volume not mountable on presario cq56 - 219wm laptop

  can someone help me please... I have no drives for this laptop.  I have no idea how solve this thing, it was working fine before bed and now it isn't. I managed to control a number of things by reading this forum. I got a code that says "unmountable boot volume" I did a hard reboot as it said and that did nothing. I tried repairing the system when she appeared, did nothing. I tried to do safe mode, but I can't tell if it of in there or not. After loads of windows logo I get a blue corrugated (a bit like a curtian blowing in the Breeze) of the screen and the mouse shows but nothing else, start no button, no icon of shortcut... nothing. I've had a few years but it has barely been used and when it is used its especially for printing photos from my camera. HELP HELP HELP PLEASE!

  Hello

  The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with startup error.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K