CQ57-105TU

Similar Questions

• I want to clone my original equipment existing 500 GB HARD drive to a new 1 TB HARD drive replacement. How?

  G ' Day,.

  I'm getting too big for my old 500 GB HARD drive, so I bought a new 1 TB HARD drive.

  Now I have all of the rescue disks that I made when I first got my laptop Compaq Presario CQ57-105TU . I could use them & fresh install all software & original OS, but then I have to start from scratch and re-install all the software I have installed, in addition to redo all adjustments & changes I made to the Windows 7 operating system since the first day - a year ago.

  Not really how I want to spend the next week or two around.

  I would like to clone the orig 500 GB HDD & all of its content to a new 1 TB of HARD drive.

  Sounds like where I want to go, but for 1 small question. I heard that if I just I'll have about 500 GB of space available new but I was also told that I will not be able to create new partitions of disk on the new HARD drive because of any existing partitions on the original HARD disk are created.

  1. is this true?

  2. in the case, where can I find a failsafe procedure to accomplish the clone, & then create 2 new partitions to cover the free space on the new drive.

  3. If so, is there a work around? If there is what is the procedure (plse give me cramps of brain with the jargon of techno... tnx)

  Some additional information that might be important.

  At the present time, my HARD drive has this configuration:

  

  Now that (Q) Local drive is diferent.  It shows 0 bytes available & 0 bytes used, & I don't have access to it.

  Computer of my wife... another laptop CQ62 model... also has the same drive,

  but hers is labeled as Microsoft Office 2010 Starter... as 0 bytes available & used - also no access, & as below, not showing is not in Dmgt.

  This drive does not appear in my Configuration of MANAGEMENT OF RECORDS : http://i.imgur.com/r4LPrDa.jpg

  Thanks for your time & consideration... Bobby

  Him early bird gets the worm, but the second mouse gets the cheese

  OK...'s done it!

  I used my CLONING HDD DOCKING STATION friends exactly like this, but he bought from a different seller 2 years ago.

  All I did was take my 500 GB drive original & placed in A slot (the front slot - Master) & I placed the new Toshiba 1 TB disk in slot B (the second slot behind Slot A... Middle - Slave). I turned the power on the box. I waited until readers spun & were ready, & I don't have a press the red button on the box...

  25% light started to blink & cloning began...

  About 40 minutes later 50% light began to Flash & the 25% brightness has remained stable.

  This means that 25%of the process has been done, & he went to 50%. .

  This sequence was continued until finally all the lights were on fixed (25% to 100%) which means that the clone was complete.

  I think it took about 2 hours and 15 minutes to clone completely.

  I closed the box power off. Then, I removed the two discs.

  I installed the new drive in the laptop carefully, & reinserted the battery, & I plugged power/charger/adapter sector of the laptop.

  Then, I ran into my fingers & press work / laptop computer shutdown.

  A few seconds my laptop has been as always to initialize.  I just had to check to make sure that I have installed the new drive... & Yes the one on the desk was the original, no doubt which means that my laptop startup disk was indeed the new drive I cloned just to.

  My laptop is started without fault!  without a hitch. Just as he always had.

  I used my computer management Administrative tool - disk management & made a simple volume for the 450 + GB of free space, affecting the next letter available player - in my car (F) case & I named it so.

  Everything worked perfectly, I can read & write on the new partition/volume. As I mentioned previously, I probably won't be able to start from scratch, but my drive (C), but it's fine for me.

  So, what have I learned?

  Well, first of all, my Compaq Presario CQ57-105TU can go to 1 TB of HARD drive without modification.

  Using the cloning method, I did no doubt saved full at least 1 weeks of resettlement work if I selected the new installation method using backup/rescue disks when the computer was first, I created started way back when.

  Outside the 2 + hours time, it took to clone the drive, 15 +/-minutes initially to remove & reinstall the drive, & the time it took to assign the new free space a drive letter (every 5-10 minutes) the procedure was clearly simple cut, I know could have been done differently, but not as simply as the method I chose.

  Pepe, thank you much for the time you spent researching my issues & responding to my message.

  I'm so glad all your fears & roadblocks have been made not, & in the end, it was possible to accomplish the task against our initial concerns - count in a very loose way with the greatest ease.

  Here are some pictures of the Station of Clone (the box) exactly like the one I used:

  

  

  Congratulations to all,

  Bobby, alias DreamRyderX

• The fan on a Compaq Presario CQ57 Windows laptop settings

  Hello, I have a Compaq Presario CQ57 and the fan runs all the time at full speed. I opened the laptop and did a fan and cleaning of the motherboard, I applied thermal paste, I changed in the bios the option #Fan always on # Enable to disable, I updated the Bios but still nothing... it sounds like a jet of fighter.should I change my fan? someone who has a Council?

  I already ordered the fan and I will keep you posted as soon as I get it and install it.
  Thank you very much

• Presario cq57: System to disable the code

  I have presario cq57 gives disable me the code 78432038

  Trying to access bios to remove passwords

  Try loader.

  67590018

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Need to "downgrade" my Compaq Presario CQ57 of Windows 8

  A few weeks ago, I upgraded my Presario CQ57 to Windows 8.  Well, I don't like her, and I now have a desktop computer that is anyway a touchscreen that works beautifully.  I thought about my computer limited knowledge that I had created the backup disks to restore my system to Windows 7 Home Premium, but it turns out it's a repair disc.

  Is it possible for me to order the right from HP disk to return my laptop for Windows 7?  I found something on the internet with this post: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/The-Cleanest-Install-Windows-7-Recovery-D...

  I don't know what to do.  Any help would be appreciated!  Thank you!

  Hello:

  Please read the info on the link below to see how to order for your PC recovery disc:

  http://support.HP.com/us-en/document/bph07143

  I believe that my instructions are easy to follow to make your own install of W7 media, if you do more like that.

  You can also make your own regular install of W7 disc and allows to reinstall windows 7 If you can read the product key 25 character microsoft on the COA sticker on the case of the PC. You will have none of the programs supplied with the PC using this method, however.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Compaq Presario CQ57: bios error 501

  What should I do to get rid of this problem?  Please help me someone.

  Welcome to the community of HP @ANAKONDA support,

  Thank you for joining on the HP's Support Forums! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support.

  I wanted to join you and help! I understand that you have a problem with an APPLICATION (501) BIOS ERROR on your Compaq Presario CQ57 laptop PC.

  Remove all USB devices. Disconnect all non-essential devices, because they can cause some problems.

  Try starting your laptop normally after having disconnected all. If that does not solve the problem, please continue with troubleshooting.

  The next step would be for you to try to restore the BIOS. You will see that the document says:

  If the BIOS of your laptop becomes corrupted, and a failure to upgrade the BIOS or damage caused by a virus, the computer can display all the following symptoms:

  • The computer displays the error message from the BIOS APPLICATION ERROR 501.

  After restoring the BIOS see if you can start the computer normally.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Remember to mark this message as an acceptable Solution if it solves the problem for you.

  To show recognition for my efforts please click the Thumbs Up below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Have a wonderful day!

• which processors I've upgraded to I have a compaq presario cq57-339wm windows 7 64 bit

  which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64-bit like faster processor, I have a processor Intel Celeron B800 now.

  This will depend on whether or not your installed version of Windows 7 is Windows 7 Starter.

  The following processors are compatible with the motherboard of your laptop.

  Intel Core i5 - 2430 M 2.40 GHz processor
  (1333 MHz FSB, 3, 0 - MB L3 cache, dual core,
  35 W; not supported on computer models
  equipped with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Core i3 - 2330 M 2.20 GHz processor
  (1333 MHz FSB, 3, 0 - MB L3 cache, dual core,
  35 W; not supported on computer models
  equipped with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Core i3 - 370 M 2.40 GHz processor (1066 -
  MHz FSB, 3, 0 - MB L3 cache, dual core, 35 W;
  not supported on equipped computer models
  with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Pentium P6300 2.26 GHz processor (3.0-
  MB L3 cache, dual core, 35 W)
  √
  Intel Pentium P6200 2.13 GHz processor (3.0-
  MB L3 cache, dual core, 35 W)
  √
  Intel Pentium 2.20 GHz processor (2.0-B960
  MB L2 cache, dual core, TJ85, 35 W; not
  pressed equipped computer models
  Windows 7 Starter 32-bit operating system)

  Intel Pentium 2.10 GHz processor (2.0-B950
  MB L2 cache, dual core, TJ85, 35 W; not
  pressed equipped computer models
  Windows 7 Starter 32-bit operating system)

• Compaq Presario CQ57: compaq Presario cq57 forgotten system password disabled code: 77564960

  Compaq Presario cq57 forgotten system password disabled code: 77564960

  At the password prompt, try 68442366

• Conpaq Presario CQ57: BIOS password assistance

  Hello

  I have a Compaq CQ57.

  When swiched on, it displays "enter or power on password.

  After incorrect attempts the "system off" message appears with the number 65134893

  Can anyone help please?

  Thank you.

  @marlpitlane

  Enter: 70892215

  Kind regards

  DP - K

• which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64 bit

  which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64-bit like faster processor, I have an AMD C-50 processor now

  The following CPU's option upgrade processors

  AMD® E450 1.65 GHz processor (dual-core, 18 W)

  √
  AMD E350 1.60 GHz processor (dual-core, 18 W)
  √
  AMD E300 1.30 GHz processor (dual-core, 18 W)
  √
  AMD C50 1.00 GHz processor (1, 0 MB L2 cache, dual core, 9 W)

  One of the first three three registered will have a remarkable performance superior to the simple core currently installed C50.

  Coupling of those with a SSD drive for an upgrade and you won't believe it's the same laptop.

• Presario CQ57: Compaq Presario CQ57 system off

  I have a Compaq Presario CQ57

  Locked out of BIOS with message system out of service [51320211]

  Hello

  Enter 44088837

  Kind regards

  DP - K

• Compac CQ57: the password of administrator presario CqQ 57

  Compac Presario CQ57 administrator password or pwower on the system from password disabled 51058343 after 3 wrong attempts... Help, please...!

  Try to enter

  44930985

• CQ57-339wm driver does not work

  I work with someone who has a CQ57-339WM (serial 5CB2050K51, product QE264UA) that is out of warranty and had a faulty hard drive. They do not have to burn recovery discs.

  I reinstalled Win 7 Home, installed the current ethernet driver, made all the important updates Win 7. I then started trying to get the wireless to run. I installed the Realtek driver and I can get the light on the keyboard to toggle the white amber.

  1. when I look at all of the network connections, he says he's there, but not connected.

  2. the properties of material shows "the device functioning.

  3 when I do a diagnosis on the connection, windows responds with "there could be a problem with the driver for the wireless network connection card.

  4. I do the ' try these repair as an administrator "and get"the wireless network adapter problems. "

  So, how to do a good install driver for this device.

  I have to mention that I tried the other two drivers listed for this model and installers wireless just nonsense without any message, so IO am assuming that this realek driver is good. It is the only one that will be installed.

  Thank you very much.

  I had already deleted the driver and reinstalled, but was not any available radio to do as you suggest.

  But, I have re - reinstall Win7 and then installed the wireless driver that you accessed as the first thing (before the wired pilot, before the windows updates).

  I now have a working wireless network!  Do not know what has been breakinbg the driver, but this sequence worked better than what I have described in the opus

• Compaq cq57 laptop: short DST-failure.

  I have a short DST-failure. ID 9lpf-5747sv-mfkr4k-60ux03. This can be corrected?

  Hello

  The error code 24 characters (there are a couple of missing characters of the 1st slice) for short drive Self Test (DST) indicate that the hard disk is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook cq57 series Nr - see here for an explanation.

  Kind regards

  DP - K

• Compaq Presario CQ57: Administrator or turn on the system of invalid password

  Hello

  I have this laptop and that you do not have the bios password. It's Presario CQ57 and the disabled system code is 86938144. Any help would be appreciated. Thank you.

  @Jdizzy22

  Enter 39690180

  Kind regards

  DP - K