the printer allignment set message is false

Similar Questions

• Hello world! I try to print my indesign booklet in pdf format, however, is greyed out in the SETTINGS of the PRINTER to set the CUSTOM PAGES.

  Hi everyone! I try to print my indesign booklet in pdf format, however, I have the option to in the SETTINGS of the PRINTER to set the CUSTOM PAGES is grayed out. I already tried to use the Acrobat 9 PPD here: https://forums.adobe.com/message/5819369#5819369, but still it does not work. I chose the PostScript file and in the next menu, the new preset, I downloaded does not work. When I export to PDF, all my bleed, colour, cultures etc information is lost. What could I do it wrong? Help, please. I use Windows 10, Indesign CC.

  As mentioned, you don't do this correctly.

  (1) you ask your printer if it has specific requirements for a PDF file.

  (2) If you do not have this, choose export using Adobe PDF export.

  3) select from the list of presets, PDF/X-1a

  (4) in the subsequent dialog box tick Pages (not Spreads)

  (5) under the tab printers and bleeds, select Use background settings lost document.

  Pass the PDF file to the printer, as Bob mentioned that printers will make the taxation.

• How is to send the native port of the printer command, when the printer is set as the default printer?

  I installed on a Windows XP printer and set it as default printer.

  I also have the manual provided by the manufacturer of printers, which defines the

  commands that can be sent over the serial port, then the status of the printer

  is extracted.

  Thus, for example, by sending an order consisted of 3 bytes: 34,56,78 to the printer (COM5) COM port

  I can get an answer advising me on the State of the printer.

  However, when you send this command to COM5, I get the following exception:

  "The given port name does not start with COM/com or is not resolved to a valid serial port. Parameter name: portName. »

  for which the printer vendor insisted on request microsoft support center.

  The port name of the printer is properly set to the correct a (COM5).

  Any ideas?

  Hello

  Your Windows 7 is better suited for the IT Pro TechNet public.

  You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Removal of documents in the print queue - error message

  I'm unable to remove a document from the print queue - the status of a document is "deleting - error - printing".  Subsequent print jobs do not print due to this error.  If I select 'cancel all documents' all other jobs are deleted, but it is still there.  I chose this & tried to cancel it, but I get a message "Error processing command" at the bottom.

  Hello

  · What is the number and model of the printer?

  · Do you remember all the recent changes on the computer before the show?

  You can check out the link below and try the suggested steps: how to cancel printing or to delete a print job that is stuck in the print queue in Windows XP: http://support.microsoft.com/kb/946737

  Also try the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Pavilion 500 series: printer does not complete the print job & error message

  Got a HP Deskjet 2542, but recently bought a new HP, Pavilion of the 500 series desktop computer.  When you try to print a document that is located at 3 pages, it will print the first page, and then part of the second page, then an error message appears.  Went to the HP troubleshooting & tried everything, but nothing seems to fix the situation.  Any ideas or suggestions?

  Hi @Themommy,

  I saw your post about the error message that appears when printing with your HP Deskjet 2542.

  I need a little more information to give you the best course of action.

  What is you receive the exact error message?

  Without this error message, I suggest trying a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing problems. I recommend you to download and run the HP print and Scan Doctor, if she doesn't fix it automatically let me know what errors or messages that you receive.

  You can always try to uninstall the printer software and then by downloading new firmware for you printer. Click on this link to get the all-in-one HP Deskjet 2540 Printer series full feature software and drivers.

  Just note that you may not be able to download the software right now. If you click on the link above and you get this pop-up window, you may need to try the page later.

  

  Please let me know if these steps solved your problem, or you receive the exact error message.

  I look forward to hear from you!

  Thank you

• Software for 8500 A909g HP does not recognize the printer during set up

  I recently had some problems with malware that weighed my HP product.  When I removed the software and then reloaded the software, it no longer recognizes my all-in-one on the net work.  I tried the network diagnostic utility and that he sees the printer but when I click to check the connection, it does nothing.  What Miss me.

  Catherine,

  Download the installer and it works from disk hard went around.  I never thought that the CD was the problem.  Until your recommendation, I spent a lot of time trying to make it work.  Thank you very much, you're my HERO!

• Disadvantages of the printer: cannot set the default printer and cannot print a PDF file

  Why can I not print with my HP Laserjet MII32FP pdf files? I not had problems like this before with my old printer. I can not even this set as my default!

  Hi Stephanie,

  This problem can be caused if the latest version of Acrobat Reader is not installed on your computer.

  1. How do you open PDF files? Using the Adobe reader software? If you use Adobe, then which version you have installed on the computer?

  2. If you use other software to open PDF files, is this software?

  3. you receive an error code or message?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  I suggest you follow the steps mentioned in the article below.

  
  Does not print PDF | Reader 10.1.2 | Windows

  
  http://helpx.Adobe.com/Acrobat/KB/PDF-wont-print-reader-10.html

  Method 2:

   

  Follow the steps in the link.

  Resolve PDF printing problems. Acrobat, Reader

  
  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  If you need further assistance on this topic, let know us and we will be happy to help you.

• How can I disable the printer is disconnected message?

  I have an Office Jet Pro L7780 on one of my networks, but I use a laptop computer on several networks. Whenever I get on a network that is not on the all-in-one, I get a warning message indicating that the 7780 is disconnected. Is there a way to disable this message?

  Other details that may or may not be important:

  -Window 7

  -7780 is connected to the router via an ethernet cable

  -Wireless is connected the laptop

  -J' have the Office Jet Pro Full Software Feature installed

  Rename the file to hpqbam08.bak hpqbam08.exe - it's here C:\Program Files (x 86) \HP\Digital Imaging\bin it is listed in the process as popup HP CUE objects, but curiously, it does NOT appear as a service under computer management-services

• the printer displays a message that says pump motor stalled. what it means?

  HP Photosmart C7250 All In One poster "Pump motor stalled" and says to press a button which is not readable. What do this mean and what do I do about it?

  Hello

  Please follow this difficulty:

  http://support.HP.com/us-en/document/c02129313

  Kind regards.

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

• OfficeJet 6500 printer a wireless set up correctly, but my laptop does not see the printer.

  E710 OfficeJet 6500 a Plus

  Laptop Dell Windows 7 64 bit version

  The printer is set to work wireless.

  I have the printer set in place.  I could print my wireless test report and have determined "That I have successfully setup my printer wireless."  But when I try to configure the printer on my computer and it asks IP... I give the IP address and it did not recognize the "Can't find printer" looks like I have witnessed this process again and again today.

  I disabled my firewall by following the instructions.

  I used the tool for "troubleshooting your connection to a network printer" stage 5 "

  Then he told me to go to the HP support forum.

  Help, please.

  Thank you

  DB64

  I had charged down the bad print driver.  My printer is a more... years had loaded the wrong printer driver.

• coupons of the printer does not print

  I downloaded the coupon for windows printer; However, the coupons do not print.

  Hello

  1. what exactly happens when you try to print a coupon? You get the error message?

  2 are you able to print all of the other files stored on the computer?

  Make sure the printer is set as the default printer and check.

  Please provide us with more information. This could help us help you better.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• HP OfficeJet Pro 8710: Scan from the printer to laptop can leave laptop to the printer

  Hi I have problems with the new operating system for sierra on my macbook pro. I can manually scan from my computer to the printer and can print but when I try to scan from the printer, an error message on the printer, that is the counl scan could not be completed, make sure that the computer is connected to the printer and then try again. on the computer, the message is communication Scanner cannot be established make sure your device is turned on check the connection and make sure that your network is working properly if these conditions are correct restart the device and try to scan the image. I just had a llok in HP Utility under the menu fax and scan of the computer is not activated. The message asked me to go to support, but I downloaded the drivers twice and still it will not activate the scan of the computer. What am I missing to make this work.thanks for your help

  Hello

  Scan of the computer can be activated that the current software was conducted before Sierra.

  Software update should be available in the next few weeks to fully support the Sierra, for now just start analysis of your Mac.

  Kind regards

  Shlomi