CQ62-225nr windows 8

Similar Questions

• Presario CQ62, test windows 7 says no disc hard bootable status oxc000000e9

  Presario CQ62 with windows 7 test says no disc hard bootable status oxc 00000e9 an unexpected i/o error has occurred, how do I fix

  Looks like the only option is to replace the hard drive. In the case of 6 hrs and heat probably killed.

• Compac cq62: downloaded windows 10. Now I have a black screen and the caps button continues to blink. All the answers.

  Downloaded Windows 10. 1 week later, I have a black screen. When I turn on the power to all I get is a flashing caps button one am not able to connect. Ilha a Compaq cq62 model.

  I have seen this reported, and the response is not good, sorry:

  "Problems of upgrading Windows 10: black screen after update (new).
  Some users taking advantage of the Windows 10 upgrade are the conclusion that once the completed upgrade their device just gives them a black screen and does not start.
  Microsoft is still working on a fix for this, but it's not a way to avoid it now. Worse, it seems that the problem that happens on multiple PC configurations. For now, we can only suggest using the utilities provided with your backup device and create some external media backup before starting the upgrade in case that happens. If this happens and you live near a Microsoft Store, make an appointment with them to have your device looking if you experience the problem. Some reports (such as those of our comments) indicate that disabling anti-virus programs before performing the upgrade prevents this issue. »

  http://www.GottaBeMobile.com/2015/07/30/7-Windows-10-upgrade-problems-how-to-fix-them/

• Webcam is not detected on Presario CQ62 with Windows 7

  Hi, I'm new to the Forum so apologies in advanced if I made this topic in the wrong place.

  I have a Compaq Presario CQ62-423NR laptop PC, and I can't detect the webcam. I looked everywhere on the web and from what I have gathered, some Presario CQ62 models have no webcams and some do. Now, I'm about to think that my model does not have a webcam, but it seems as if there is a webcam at the top of the laptop unless someone can confirm that this isn't a webcam?

  in any case, I understood also that Windows 7 are compatible with the following programs for HP Laptops: YouCam and CV SmartMedia.
  Sources are here.
  http://support.HP.com/us-en/document/c01970581

  Which leaves me with the options to install one of the programs above, that I did and the two programs do not detect my webcam despite this webcam has been registered there.

  I tried to test on other programs of messaging like msn, Skype and so forth and the webcam is still not detected.

  I also made sure the programs I have installed are compatible with Windows 7 64 bit.

  I also trouble trying to find a driver for the webcam to this model as well, that makes me then back to the start, I have even a webcam? -___-

  So anyone who would throw some lights as to whether or not I have a webcam for this particular model or there is something I am doing wrong?

  Thanks for all the help!

  Hello

  Sorry, but your model have only the built-in microphone. There is no webcam.

  Check the specs here.

• Compaq Cq62-225nr: Bios password :(

  I don't remember the Admin password on my CQ62. Has been on the shelf for a while due to an upgrade, which now broke down. It is locked and it gives me a code saying 89794268. Sort of help or am I out of luck?

  Try > 36692868

• BSOD Presario CQ62 running Windows 7 64 bit

  I have a client who has recently updated from Kaspersky AV and now that they're getting the BSOD. This BSOD doesn't happen every day, but when we do they contact me want to stare at me. I capture a couple of the MiniDump files and I'm ready to download for anyone who can help me to solve it. The issue seems to be with their Realtek RTL8191SE Wireless B/G/N WiFi Adapter. But I updated the driver and it is always the case. They had also installed iTunes and I know that Kaspersky has problems with iTunes, so I uninstalled everything to do with iTunes, since they no longer need. Can anyone give me any help would be great.

  Thank you

  Hi Dahceneerg,

  Do you get error with BSOD messages?

  This problem may occur due to hardware and software issues.

  I suggest you try the procedure described in the article and see if it helps.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note:
  1) when you do the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  2) when you restore your computer from a system image, the contents of your hard drive is replaced with the contents of the system image. This means that any changes you made, you have it installed, or you saved after the creation of the image of the file system will be probably lost, unless you have a recent backup of your data.

  3) reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.

  4) when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. If you reinstall windows, make sure you back up all your data.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Anyone with USB problems after recent updates Microsoft for Windows 7?

  A couple of days my Logitech wireless mouse stopped working after my Presario CQ62-225NR restarted to complete the latest microsoft system/security updates, 4/12.  Further investigation, external and thumb drives drivers were more or recognized.  Here's what I managed to shine since the Device Manager:

  ********************

  Right click on each of these 3 topics and select "Uninstall".

  This done right click on any device and select 'Search for hardware changes', it will reinstall fresh drivers for these devices, I hope that this will help to solve.

• Hard drive error (Code inside)

  I have a laptop Compaq Presario CQ62-225NR (running Windows 7, did not come with an installation disc) which froze during use and would begin not later upward; It just says: 'Windows loading files', then crashes on a blue background enough.  I did a test drive that comes up error id "PGFAMG - 55264 L-XD0036-60TL03" for hard disk 1.  If someone could identify the problem, it would be great.  Thank you.

  Hello

  A possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  Replacing the hard drive is quite simple.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 47 of your & Maintenance Guide.

  As you do not your recovery discs, you can order a replacement set using the link below - using them to reinstall the operating system on the new HARD drive reinstall it also almost all software originally shipped with your laptop as well as re-create the recovery on the new disk Partition.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Synaptics PS/2 Port Touchpad

  Good evening

  I have a laptop Compaq Presario CQ62 under Windows 7 Home Premium. I have problems with Touchpad Synaptics PS/2.

  Sometimes it works, and most of the time, it freezes and won't do anything. I checked the HP Web site for an update of the driver but States I have the latest driver. Also, check the Device Manager and it says that the device is functioning properly. Could you please tell me what I could check now.

  don't know if an update of the bios for this laptop did something on the touchpad, but it's almost always a good idea to have the latest version of the bios installed on the laptops.

  According to the CPU/chipset that has your laptop, the latest versions of bios are:

  Intel - F.37

  AMD - F.29

  versions of driver/software on the support page for your computer hp laptop are not necessarily the most recent (with the exception of the bios). the latest version of synaptics touchpad is this a - 16.0.1.0: ftp://ftp.hp.com/pub/softpaq/sp56501-57000/sp56713.exe

  before installing it first completely uninstall the current version that you have installed

• DxDiag has detected that there is a problem accessing Direct3D

  I'll have a directly question X

  Hello

  I have a laptop Compaq CQ62 with Windows 7 64 bit.
  He has a Mobile Intel 4 series video card
  I have Direct X 11 is installed
  However, Direct X seems to give me problems.
  All my programs video game including games crash at launch.
  I went to Dxdiag to understand the question, but when I run Dxdiag it gives me the following error:
  ' DxDiag has detected that there is a problem accessing Direct3D the.
  last time that this program has been used. You want to bypass Direct3D this time? »
  If I hit 'Does NOT' crash DxDiag if I type 'YES' Direct 3D and Texture AGP become "not available".
  I tried uninstalling and reinstalling, but it was without result. Can anyone help please?

  Hello

  1 did you do changes on the computer before the show?
  2. What games you try to play?

  Method 1:
  You can upgrade the graphics card drivers and check:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:
  You can check the link provided and check:
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  Method 3:
  You can also perform a clean boot and check if it helps:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 4:
  You can see the supplied knowledge base article and check:
  DirectX is properly installed on your computer
  http://support.Microsoft.com/kb/256182

  Also check this link for more information:
  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

• How can I install Windows XP on windows 7 laptop Compaq Presario CQ62-215DX?

  I want to install XP on my laptop (laptop Compaq Presario CQ62-215DX) which has Windows 7... give me some advice please

  You replace the startup disk in the BIOS cd. Then boot from the XP CD. And press a button when it tells you. However, he will wipe away Windows 7. So, if you want anything copy everything you want (with the exception of programs), before formatting the hard disk.

  NOTE: XP has no drivers for most of whats on the system (LAN/Sound/player card etc.). So if that is the only computer you have, go to HP site for this laptop search, download drivers and copy them into something. Before you begin. Or you won't get back on the internet...

  Also NOTE: If the disk hard in it is SATA, you will need to disable the AHCI in the BIOS (change it to IDE mode). Or XP will crash before you get to the configuration screen. Unless you download the SATA drivers, unzip / extract and add them when it says press F6 (on a floppy disk).

  The XP CD does not have SATA drivers on it either. If you do not add the SATA drivers during installation, do not change this back to AHCI after installing XP. Or it will crash

  In addition, make sure that you have a XP key. A key to windows 7 will not work

• recovery-presario CQ62-215nr system, windows 7.

  system recovery will not work. Not be filled discs. HP wants $60 for discs. Does anyone know other options?

  Hello

  Here is another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a very respected source - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Presario cq62: windows live mail on my computer

  When I bought this computer I got another email address. When I try to answer or respond to adds or other things on the web at times "windows live" opens upward and he has my old email address. When I send my answer, it always comes back unable to deliver because the email address no longer exists. How can I change my current email address so that the live 'windows' program works? Thank you

  Thank you very much. It took me awhile, but I think I've fixed it! I clicked on the congratulations button a couple of times, but cannot tell if she did anything. Thank YOU again for your time and help

• Win7 Home Premium: I want to open multiple windows to "windows explorer". Presario CQ62.

  Before Win7, there was an icon to open Windows Explorer, and I could open multiple windows of it.  I really miss this feature; It was great for transferring files.  (How) can I do now?

  I also want to move the icon on the desktop and out of the taskbar.

  Thank you very much

  not-really-THAT-clueless

  Use the Win + E keys to open as many times as you need.

• I forgot the password to start windows 94993068 for 2000 compaq presario CQ62

  Please help me

  Hello

  Try to enter: 21691068

  Kind regards

  DP - K