Crashes and no upgrade

Similar Questions

• Satellite L30 - after upgrading RAM OS crashes and BSOD is shown

  Hello!

  I would like to know what is the problem on my Toshiba Satellite L30 series (PSL30L-0MOOD) because I have installed my RAM of 256 MB 1Rx16 PC2-4200 s-444-12 to an Apacer 2 GB DDR2 667 mHz... All of a sudden my windows crashes and displays a BSOD (Blue Screen Of Death) and just restarts.

  I need help because I think there may be a problem in my RAM upgrade... Thanks for the help guys!

  Hello!

  You only use the new module of RAM or both?
  If you use both, try again with the new module.

  In your case I would test the RAM with special programs like Memtest86:
  http://Memtest86.com/
  Download and burn it to a CD and then boot from it.

  Good bye

• I've upgraded to Vista XP, the system crashed and now it says to install the disc so that it can be fixed. He doesn't like XP or Vista disc. How to get a copy of the Vista disk (and not an upgrade) my computer can run.

  my vista system crashed and now it asks me for my vista drive.  He doesn't like my drive to upgrade to vista, says that my XP system drive does not work either.  where I kenza a copy of vista disc that works?

  To reinstall Vista:

  You can not legally do a clean install of Vista with a Vista Upgrade disk/license.

  Reinstall XP > then go to Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here's a startup repair disk, you can do:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I tried a number of times to upgrade to windows 10. I get c1900101 - 4000D as a mistake. Once, my entire hard drive crashed and I had to reinstall Windows 7.

  I tried a number of times to upgrade to windows 10. I get c1900101 - 4000D as a mistake. Once, my entire hard drive crashed and I had to reinstall Windows 7. I am also having a problem installing Adobe Flash player. It is said that API-MS-Win-Core-Registery-l1-1-0.dll is missing but I don't know what it is. Any suggestions?

  "Configuration settings" is the final phase and fault codes look like c1900101 x400xx. The most common failure here is 40017, which means we could not start. Since this is the first time start us Windows 10 with all the drivers in place, once again, drivers are usually the cause of the accident. These issues tend to be less transient than the 30018 s, then a second test is less likely to solve the problem. Yet, it never hurts to try.

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  If the problem persists, try the upgrade manually, but choose the option to keep personal files only, you will have to reinstall applications.

• IPhoto crashed and remove partial events

  I'm sorry, there was a similar thread, and I accidentally it marked as closed. He came from nowhere and I includes a summary and a link at the bottom.

  I launched iphoto 9.5.1 on 10.9.5 and have no good backup.  (Please do not pass judgment, I know I should have upgraded and saved...). Is it possible for me to return my events, changes, titles and other metadata?

  2 days ago iphoto crashed and would not restart. When you hold option + command while from iphoto did not (much less quick to rebuild) library, I installed iPhoto Library Manager who found the library without even an error message but only a fraction of the pictures (about 1500 to 6000). Photos seem to lack of each event, the films have been truncated. The most recent event was absent.

  I checked in the file system, Library.photolibrary/Masters/2014/05/10/ Pictures/iPhoto... the pictures were there and seem to be grouped reasonably, probably by import. A recovery of Library Manager iPhoto later with pictures of recovery orphan to return a batch of photos, I guess that all that were in events over what was in the trash. (Even after the removal of duplicates, I more than before.) They are in folders of every day now, I almost 500 instead of 90 and lost titles and most of the changes.

  The thread iphoto 9.5.1 orphans most of my photos

  • The damaged library is located on the system drive, in ~/Pictures named Library.photolibrary iPhoto and shows in the finder with the icon of the fan (see below)
  • Control option double click the damaged library translates iPhoto trying to repair the reconstructed library and then try to import the library damaged in that rebuilt
  • The rebuilt library does not contain a folder of "old masters", at least not after a savaged the orphan photos.
  • I did not perform an upgrade on the damaged library or iPhoto update recently
  • It crashed during the execution of the faces.
  • drwxr-xr-x @ 17 personal myuserid 578 4 Feb 01:11 iPhoto Library.photolibrary

    

  • 

    

  The simplest solution is to restore the backup copy of your library that was made just before this happen.

  If not try this:

  With the help of iPhoto Library Manager to rebuild your iPhoto library

  1 - Download iPhoto Library Manager and launch. > click on the button Add library.

  

  2 - Select the library you want to add those in the selection window.

  3 - Make sure that the window box "photos orphan Scavange" is checked in the reconstruction.

  

  4. now that the library is listed in the left pane of PILM, click your library and go to the Library ➙ rebuild library menu option

  

  5. in the next window name the new library, and then select the location you want to be placed. Click on the button create.

  , Note 1: This creates a library based on the LIbraryData.xml file in the library and will retrieve the events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.

  
  

  Note 2: Your current library will be left intact for subsequent difficulty attempts if you wish.

  

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• If my laptop came with Vista installed on it, but it crashed and I currently have installed linux, can I still switch to 7 for $30?

  If my laptop came with Vista installed on it, but it crashed and I currently have installed linux, can I still switch to 7 for $30?

  original title: moving from Linux to 7

  Hello

  Unfortunately, you cannot switch from Linux to windows operating system 7, but you can upgrade from Windows vista to Windows 7.

  Because you are unable to upgrade Linux, I suggest you perform a custom installation of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/help/performing-custom-installation-Windows-7

  Also see the link below for more information on purchase or price details of Windows 7.

  http://www.microsoftstore.com/store/msstore/list/CATID.44066800/parentCategoryID.44066700/CategoryID.50726100

  Hope this information is useful.

• Windows Vista crashes and would not start

  Original title: Vista crashes

  I have a Toshiba Satellite that came with Windows XP pre-installed. After a year of work well, it crashed and wouldn't start up. I used the disc that came with the laptop to repair the utility startup without success. I ended up reinstalling the entire OS so delete all.

  However, it turned out that the operating system that was on the disk was not XP, but actually Vista for businesses. Of course, being Vista, my computer barely working and crashes whenever I use it. In addition, because it's a different OS from what I originally bought my license is invalid and I constantly reminds me that.

  My questions are: can I upgrade the original Windows XP operating system, using the original validation key? or if I want to upgrade to Windows 7, I'll be able to because my current license is not valid?

  Hello

  1. what error message you get on the license?

  2. What is the error you get when the computer crashes?

  3. do you have the genuine product key of Windows Vista or Windows XP?

  You can buy the new product key for Windows 7. If you upgrade to Windows 7, you will get the product key when you purchase Windows 7 operating system.

  If you want to install Windows XP, then this will be a downgrade from Windows Vista and if you install Windows 7 then you can try the steps in the following Microsoft articles.

  The upgrade to Windows 7: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/upgrading-to-Windows-7-frequently-asked-questions

  Upgrade Windows XP to Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  Hope the information is useful.

• If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer?

  Packed HARD drive

  If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer? How the product key is affected? He still believes that I am still on the old HDD?

  If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer? How the product key is affected? He still believes that I am still on the old HDD?

  Yes.

  Not at all.

  N °

  If you have Windows 7 with an OEM license agreement (it came pre-installed on the computer is the most likely scenario for this, but you can buy OEM copies so) or you have a license to retail (upgrade or full version) - the way your question is worded is very specific - you * can * install Windows 7 costs/clean on this same system as much as you wish.  A new hard drive won't stop you activation - well that at some point, you need to activate by phone, as opposed to over the Internet.

  Now - if the motherboard is replaced and it's licensed OEM and replacement was not that of the OEM that probably set up your computer...  Then you have a problem.

  Unless you happen to have a license of Windows 7 retail sales, so it is not related to the computer (motherboard).

• PC crashed and now seems to work windows 10

  Original title: crash

  my pc has decided to crash and now there appearantly earased all my files. She came back to the top as it was cleaned with origanal one programs. is there anyway to get back them? at the time it was windows 7 but seems to be running windows 10 but I don't really know. at first, I got a notice that I could not access my files and everything I've done on this user would be deleted at logoff to acess the files log and try to log in at a later date.

  Hello

  Thanks for posting your query in Microsoft Community.

  Let me ask you a few questions to understand the question better;

  • Are you saying that 10 Windows has been installed, when you say, ' it was windows 7 but seems to be running windows 10 '?
  • This upgrade has occurred over the last 30 days?

  If you say now you see Windows 10, it wasn't an accident but it can be restarted to download and install Windows 10.

  This upgrade can occur during the installation of update Windows, and after a few restarts, you now see Windows 10. If you are unable to view your files, it could be possible that these files are stored in the Windows.old folder in the C: drive.

  Press the Windows key + E or click File Explorer icon in the taskbar

  Click on This PC , and then double-click Drive C:

  You should be able to see the Windows.old folder, double click on it and click on users

  Double-click the user name you think you got the data into it

  Navigate to the folder to check if you are able to view your data

  If so, you can copy your data from the Windows.old folder to where you want to save

  If you think that you do not want Windows 10 and this upgrade which has passed in the last 30 days, you can go back to a previous version of Windows that has Windows 7 through the process below.

  Type parameters in the search bar and click on it

  Click update and recovery > recovery > back to the previous operating system

  Note: If this upgrade that has spent more than 30 days ago, you may not be able to recover your data or return to the previous version because the Windows.old folder is automatically deleted after 30 days.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Why my Pc keep on crashing and freezing

  My pc crashes and freeze for no apparent reason, I've been on it just yesterday and all the few minutes that I was receiving messages saying Facebook.com, Facebook, Internet Explorer, Ftalk, Google do not react even imminent seems to be locked up and it is supposed to be compatible with all the windows, Facebook, gmail, yahoo and other cat.  go to troubleshooting and all I get is no detected problem and microsoft will close programs and inform me when there is a solution. I wouldn't mind, but I've had this problem before with Vista.  To try to combat these problems, I have upgraded to win7 and still have the same problems, even my apps are freezing and crashing, why and how stop what's happening? Thanks jackie

  Hello

   
  This error message you get when the computer crashes?
   
  Do the methods and check if this solves the problem.
  
  Method 1:
  I suggest to start the computer in safe mode and check if the same thing happen, check out the link:
  
  Advanced startup options
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
   
  If the problem does not occur in safe mode, you can configure the computer to boot and check if the problem persists. It will start Windows7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.
   
  Method 2:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: See step 7 of the connection to the computer to start as usual after troubleshooting is performed.
   
  Method 3:
  I suggest scan SFC (System File Checker) on the system and check if the problem persists. Follow the steps mentioned in the given article.
  
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 4:
  You can even check if you have found errors in the case where the Viewer, and if you find one, let us know the details. To open the event viewer see the link.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  
   
  I hope this helps.

• HELP blackBerry Smartphones: Crash when Terminal upgrade... My BB8820 dead?...

  Hello

  The BB Desktop manager crashed during the upgrade of my BB 8820 terminal (Internet Explorer script error messages)... Now my BB is like stop and blinks RED...

  What can I do to restart?... He finally died?

  Help, please...

  Thank you...

  JL_cmder to wipe your device OS. Click this link for more details.

  Check the steps below to update OS by installing device OS in the PC-

  Step #1:

  Before you begin, make sure that BlackBerry Desktop Software is installed on the computer.

  Step #2:

  Make sure that you have installed the software for device updated on your computer. Visit this link to get the software for device update the carrier OS download site.

  Step #3:

  Users can perform a full or selective data backup using the backup and restore tool in BlackBerry Desktop Manager using the following steps:

  1. connect the BlackBerry device to the computer that is running BlackBerry Desktop Manager

  2. open the BlackBerry Desktop Manager

  3. double-click on Backup & Restore

  4. Select backup to perform a full backup or select Advanced to make a backup of specific databases

  5. choose a location to save the backup file, and then click Save

  Step #4:

   

  To perform a clean installation of the BlackBerry Device Software, do the following:

  1. connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager

  2. double-click on the icon of The Application Loader

  3. click on next to start the installation

  4 type your BlackBerry smartphone password, if prompted, and then click OK

  5. click on the check boxes corresponding to the names of the applications you want to load, and then click Next

  6. click on Advancedand then click the check box next to erase all applications already installed.

  7. click Next.

  8. click on the check box next to of not automatically backup the application during the process of loading data

  9. clear the check box next to the backup and restore applications installed wireless

  10. click on Next -> Finish

  11. once the process is complete, the load succeeded message

  12. click close to return to BlackBerry Desktop Manager.

• I have InDesign CS5.5 for 2 systems - my laptop crashed and I now have a new with Windows 8.1.  I downloaded the correct version of InDesign, but when I enter my l series #, the message reades # is valid, but the software cannot be raised

  I have InDesign CS5.5 for 2 systems - my laptop crashed and I now have a new with Windows 8.1.  I downloaded the correct version of InDesign, but when I enter my l series #, the message reades # is valid, but the software cannot be found on the system.  It seems that the program PageMaker 7 which is not on the new computer.  How can I load my InDesign CS5.5 on the new computer laptop?

  If you purchased InDesign CS5.5 as an upgrade then it looks like it's showing that you need to provide information about the old version where you improved since he found nothing that qualifies.  You must only choose the old version and serial number.  (I don't know anything about InDesign, nor how it might relate to PageMaker).

• Premiere Pro CC 2014 crashing and sinking on the documentary Film project

  We worked first on this documentary film for months.

  As we reach the end it starts to really get bogged down and crash a lot.

  The equipment is

  iMac 27 inch 3.5 GHz Intel Core i7 end 2013 model

  Apple Cinema HD Display

  32 GB 1600 Mhz DDR3 RAM

  Graphics NVIDIA GeForce GTX 780 M 4096 MB

  Internal 1 TB SSD drive

  We perform first Pro CC 2014.0.1 and stayed there because we do not want to upgrade the software at the heart of the project.

  The media are all on the external hard drive. It is a USB 3.0 connection. There is a lot of images that we are working with.

  We have a few After Effects compositions that are related to the project and we have exported those that are made under QuickTimes to try to stop coming bogged down us.

  Any advice on how we can manage this problem of crash and freeze would be very much appreciated.

  We don't have the money to upgrade the computer, and it works pretty well for us so far.

  Here are the things we made:

  Make a smaller timeline because we were working on one that was the whole film.

  Off the secondary monitor and disconnected.

  We are looking to move the cache rendering off the external drive on a thunderbolt drive, but I fear that this may take some time.

  Any recommendations would be greatly appreciated.

  Split the elements of reading/writing is rather a key to get a smoother operating out of PrPro. Alternatively, put things on a big RAID-0/5, this kind of thing is covered on the

  Page of Tweaker...

  http://ppbm7.com/index.php/tweakers-page

  And I highly recommend that you take a look. Their info is not only "we believe...". «... but many sequences of test results carefully much running on many machines with all kinds of pieces of hardware & pieces.» You can also sign up, download the test PBM and run it on your own machine. It takes only a little while to do so and with the recorder application which included and show results to them, you can get a very good breakdown on where your machine is ok... and where the points of congestion occur.

  I think it would be good for you right now... you must have things to do, not guess and try things.

  Neil

• Frequent crashes and impossible to restore

  IPod has been crashing and restarting frequently (5 - 10 times per day) now with the new update, I get an error message and I see the same error message when you attempt to restore (error code 4013).

  Does anyone know all the potential solutions that do not require to pay me anything / send to Apple?

  Hi Cwatk003!

  I see that you get an error message on your iPod when you try to restore your iPod is reboot and crashing frequently.  I know it's important to have your iPod working properly, so I'm happy to help you.  Please fill all the troubleshooting steps in the following to see if you can fix this problem yourself.

  If you see an error when you update or restore your iPhone, iPad, or iPod

  If you see errors 9, 4005, 4013, 4014, when you restore your iOS device or

  Thank you for using communities of Apple Support.

  See you soon!