crashes, restarts, showing half ram and color on screen corner sometiomes line

Similar Questions

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Lightroom develop view shows strange outlines and colors

  Hello

  My apologies if this has been asked before, but I find it difficult to find the question as I don't know exactly how to describe it.

  When I view a newly imported image (RAW from Sony a6000) in lightroom (latest version) cc - she understood correctly in the library, but grow it shows very strange colors.

  This does not happen on my other computer.

  
  I have a bad setting on this computer?

  Library:

  

  Develop:

  

  If you need more information, let me know what it is and how to get it

  Thank you
  Jamie

  Hi JamieJ,

  Please turn off the graphics processor in the Lightroom preferences.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Let us know if that helps.

  Kind regards

  ~ Mohit

• After Effects CS6 Crash - Film MXF + Keylight and Color Finesse

  Greetings community AEX,

  I'm pretty used to AEX crashing no aparent reason, but the frequency of the last series is a bit disturbing, and two of the stronger plugins (color of SA Finesse/Keylight) keep crashing when used. I am at a loss to know where to continue troubleshooting.

  
  Question:

  (1) I create a project in Adobe Premiere, and thanks to the Dynamic Link I replace a section of my sequence, by AEX composition.

  1 a) images that we use is MXF - 50mbit 4:2:2 acquired from a Canon XF300.

  (2) I use Color Finesse to adjust the image, the primary and the secondary color correction applied (we're doing chroma key work, and I find secondary helps give me a cleaner key when I can even the Greens)

  (3) I then apply the Keylight 1.2 filter, make the necessary adjustments and try to get an overview of my work in moving the playhead, or launch a RAM Preview.

  
  At this point, After Effects with either crash outright (if I touch the head or try a RAM Preview), or he will wait a few seconds and THEN crash.  HOWEVER, if instead of trying to move the playhead I just save my project and go back to the creation, the composition of the AEX plays very well in my sequence.  He did adjust my extremely difficult settings when I can't use the playhead to watch different images within the AEX.

  
  This question is highly reproducible, to the point where AEX will sometimes crash when trying to load the project file.  This is clearly struggling with the previews.

  Steps taken to solve (without success)

  -Restart the PC, delete the temporary files, check disk space, updates

  -J' tried to reset all default settings (CTRL + ALT + SHIFT), tried to clear all the cache/db, changed the location of the cache/db

  -Tried opening and creating a project outside dynamic links

  -System restart/graphics driver check

  -Curse to the computer

  -Turn off made in settings of the AEX, GPU switching CPU

  System Specs:

  -Recently reloaded my system clean installed Windows/Adobe, conducted all software/OS updates and generally little to the config which could cause a problem.

  -Intel Corei7 960 12 GB of ram

  -nVidia Quadro 4000

  -Intel 256 GB SSD + WD Black 2 TB.

  -Cache and previews are stored on the SSD,

  
  I am at a loss to know where to start or go here for troubleshooting more far.  The forums are so clogged with others experincing blocks in AEX (perhaps because only Adobe rushes their development cycles and explosions early software...), it is difficult to find something similar to what I am experincing.  Reloading of programs is an option, but uninstall, download and reinstallation is a pain, and I want this to be a last resort.

  Thank you

  -Greg

  Before you uninstall and reinstall once more, try this test first: transcode some of his problem for a codec lossless bindings.  I recommend the PNG Quicktime codec.  Then apply effects to them again in AE to see what is happening.

  The reason for this: your MPEG2 camera recordings.  It is not a true intermediate codec and compression is a group of images, rather than a single image.  The combination of Keylight and Color Finesse can be give AE fits.

  For this anthropomorphize, AE like to think image by image, but MPEG2 forces AE to think backwards and forwards over several frames, and it can be to revolt on you.  I hope you enjoy the technical jargon.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrade of RAM and windows stops and restarts automatically when it tries to load.

  I recently updated my computer running:

  Motherborard: ASUS Crosshair V Formula

  Graphics card: MSI R6970 lightning (2 GB dedicated DDR5)

  RAM: 2 x 4 GB Corsair vengeance 1600 Mhz

  I have another 2 x 4 GB of ram and have tried loading windows vista ultimate 64-bit with installed, the configuration of the bios recognizes that the ram is present, however, windows crashes and restarts automatically when it tries to load.  Any suggestions on how to get this extra memory working out to change my Linux operating system?

  Thank you

  Chris

  Hi Chris,

  You can try to connect a single stick of RAM at a time and see what happens.

  If you are not facing problems, then try to swap the RAM sticks and check for the issue.

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• 2009 iMac has none showing after restore and hard disk crash

  My 2009 iMac running 10.9.5 Mavericks locked up and I had to restore it from backup. After I restored it, it made 2 backups and then crashed. When I tried to restore it again there is no hard drive available. I got when starting was a folder flashing with an exclamation mark. When I started a drive (10.6) there was no available hard drive. The Profiler system showed no applications and no hard drive. Does anyone know how ix, or it is not repairable? Thanks, DJ

  Reboot into Recovery Mode and then reformat the drive of DiskUtility in recovery. Try again.

• YOU G42-490, HP laptop: URGENT - slow PC lately, freezes and crashes. Increase the RAM will be solve this prob?

  Hello

  My PC # is G42-490TU, product model # LR783PA #ACJ, processor - Intel Core (TM) i3 CPU M370.

  RAM: 2.00 GB (1.86 GB usable), System Type: 32-bit operating system.

  My PC is running very slowly lately. It crashes, freezes, pages become insensitive and therefore, it takes a lot of time typing. I use every day for work so, I want to solve this problem as soon as possible.

  I would like to increase his speed to be able to work smoothly every day. Want PC to run fast.

  Pls suggest faster, easier and less expensive to fix this.

  How to increase the RAM? It cost to increase the RAM?

  Also, reading the messages of prev I downloaded this link - http://www.intel.com/support/graphics/sb/CS-009245.htmto determine the chipset info and following is what I got. Pls know me if increase the RAM to 4 GB will solve my system is making him run fast and do leads not to any crashes / freezes etc.

  How to increase the RAM?

  

  Pls answer soon!

  I'm waiting for your response forwarfd.

  Thank you best regards &,.

  Isha

  Hi @HPIsha

  I understand that you have performance problems with your laptop (speed, gels, etc.). I'm happy to help you with this.

  I'd take a glance on the following pages; There will be an overlap between them, but each is useful.

  Some software Applications may cause Windows to start or run slowly

  Windows 7 stops responding or becomes very slow after you connect to the Internet

  Set the performance of the slow system (Windows 7)

  It is possible that it could also be a hardware problem, but it is most likely too much software, loading or running in the background and thus more taxing your processor. These pages can help with this and other common causes such as malware and other cousins of software.

  Try these first, because these solutions are free. When it comes to hardware such as memory upgrades, you need to get the memory to do the upgrade, and it must be of the correct type to be usable.

  You can check this link for the Service Manual: Compaq Presario CQ42 Notebook PC and PC portable HP G42 - Maintenance and Service of Guide. In it, you will see the type and compatible variety.

  I hope this helps.

• HP 14 Chromebook q000ed [after several powerwashes and a USB key recovery is crashed/restarted]

  HP 14 chromebook q000ed

  purchase date: November 2013

  - - -

  A couple of months chromebook began to crash/restart. At the beginning it was a few times / week, then it got worse to the point I had 2 powerwashes in one day and hangs / reboots even guest mode!

  After the restoration of the many powerwashes and a USB port, I got another problem of crash/restart. So the problem looks like it is material.

  I paid for this product and I can't even browse the internet. There are a few Q & a in support of google here.

  What advice you get?

  P.S. the recent crash/restart happened when writing this thread! Had to write this new!

  I'll give you the Dutch HP support site, where you should be able to locate the correct contact information: Neem contact op met HP

  You are classified as a student, because it is the system of classification of the Forums. It does not reflect that you are a student in real life.

  Mario

• When you watch videos on youtube or try to Watch Tv shows video stops and crashes often?

  When trying to watch videos like on youtube or Tv shows videos stop and stall.  Also his cuts in and out.

  It will be because the information can't come down from your internet connection fast enough for you to watch in real time.
  You can;
  Press pause, give the video time stamp and then press play - the time between each pressure depends on the duration of the video and the quality this is the case, the longer period is better.
  Download the video to your hard drive and then watch
  Get a faster internet connection.

• Crash & restart (includes Specs)

  Hello

  Here are my following features:

  • MacBook Pro (15-inch, 2.53 GHz, mid 2009)
  • 2.53 GHz Intel Core 2 Duo processor
  • Memory 8 GB 1067 MHz DDR3
  • NVIDIA GeForce 9400 M 256 MB graphics card
  • Storage capacity 500 GB

  After the upgrade to El Capitan. My laptop has been crashing & restart. I replaced my optical drive & increased RAM in the past (a year ago) and has been working perfectly fine until I updated to El Capitan.

  Help, please.

  Thanks in advance.

  Please go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.  She will show us what is currently on your system, and if there is anything causing the crashes you are experiencing, we will see and hopefully be able to advise you on how to resolve this.

• I changed my ram and something is wrong

  Hello

  I am having trouble with my MacBook Pro. It's from early 2011, and it got REALLY slow down recently. Everything seemed to go well in general so I bought new Ram (2 x 4 GB instead of the 2x2gb installed). A few hours ago, I installed the RAM and the problem is that the computer is now super fast but it does that for a while then suddenly restart itself. Chrome and Thunderbird are also break repeatedly, sometimes after working for a while, sometimes they crash at startup.

  I tried to install El Capitan, but I get the message ' year error occurred "3 times already (I'm still on yosemite because my computer was so slow and almost died).

  I ran a program called Rember and I received the following message:

  "FAILURE: incompatibility of data to local address 0x0000000175271d80."

  "Actual data: 0x0000000175261d80.

  Is it possible that something is in conflict with the new ram I have installed, causing the failure of the system?

  A note: I bought a set of 2 x 4 GB of ram before and they did not work at all - my MacBook Pro would just keep rebooting. Now it's different because the computer running for a period of time (about 30 min to an hour).

  I hope someone can help me solve this problem.

  Thank you

  What happens when you install the RAM of origin?

  Macs are very selective with regard to the RAM.  What brand did you buy and what are the specs of the RAM?

  Check if your MBP had the kernel panics.  If so, use these instructions to post a:

  https://support.Apple.com/en-us/HT201753

  Ciao.

• at startup, the computer cannot display anything, just a mash of white and colors

  When the computer starts, there is no screen, just white, black and colors dance around the screen, by pressing F2 or F8 does nothing, nothing appears

  before the problem occurred that I restored system restore computer, because the computer has crashed with message "display driver nvlddmkm unresponsive", the restore was successful but then ten minutes later computer crashed and restart gave the above problem

  Thank you, Gary

  You have to become corrupted Graphics Driver or failing or graphic material.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 explorer.exe crash/restart of cycle - all solutions?

  I was stuck in the cycle of crash/restart explorer.exe since September now and I am curious to know if there are definitive solutions. A fix would be nice...

  Details
  I installed Windows 8 Pro x 64 September 18 (reliability monitor information). The first instance of this crash/restart cycle was September 24. Then, I tried to find out what happened on this day: there was an automatic installation of an update of definition for Windows Defender (KB2267602 (definition 1.137.336.0).) Looking at the previous day, the following are installed:
  • Google Drive
  • Update Google Helper
  • Microsoft Hardware USB keyboard
  • Microsoft Hardware USB mouse
  • Generic Non Plug-and-Play monitor
  • AccuWeather.AccuWeatherforWindows8
  • InvokeITLimited.TableClock
  According to the reliability monitor, the problem occurs about fifteen to twenty-five times a week. The level of reliability varies from 1 to 4. (I don't know what the vertical scale means that there is no label.)
  In Event Viewer, this is a typical mistake:
  The failing application name: explorer.exe, version: 6.2.9200.16433, time stamp: 0 x 50763312

  The failed module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505ab405

  Exception code: 0xc0000374

  Offset: 0x00000000000ea485

  ID of the process failed: 0 x 1248

  Start time of application vulnerabilities: 0x01cdd502eff7d1ec

  The failing application path: C:\Windows\explorer.exe

  The failed module path: C:\Windows\SYSTEM32\ntdll.dll

  Report ID: a991c3a6-4169-11e2-be88-e06995f573cd

  Faulting full name of the package:

  ID of the failed package-parent application:
  Every mistake I checked has the same code exception and faults of program and modules. (Besides - I tried to click on the "Event log online help" link but get an error itself is in error, but it's a slow minor compared to the issue of cycle explorer.exe crash/reboot.)
  I just started going through applications Windows 8 and uninstall, in hope, where is the problem. (One interesting thing is that the issue almost never happens when I'm not using my computer - it occurs most often when I save a file in a program (it is often with Photoshop Elements, but this is not the only program that seems to induce the cycle crash/restart).) At least the file I save is not damaged...
  Information System
  Windows 8 Pro
  Processor: Intel Core I7-3960 X
  RAM: 32 GB
  System type: 64-bit OS
  Motherboard: Intel DX79SI
  Graphics card: NVIDIA GeForce GTX 670
  Paving work my OS ("Refresh") is not really a solution (solving a problem by clearing, it is not a fix - it is a hope).
  Just for fun, I ran scf - he said he couldn't find any errors ("Windows Resource Protection not found any breach of integrity.").
  Thanks for reading in a lengthy post.
  Stuart

  You are welcome.

  After the back if the problem persists.