Create a CD with jpg files in Windows 7 to be read on Mac

Similar Questions

• Working with photo files in Windows 7 without SLide-Show, etc.

  Y at - it an option to work with photo files on Windows 7 WITHOUT using the slideshow, Sky Drive Option, etc...  I want to attach a file of unique photo to an e-mail message without these being included.  What program can I use to open these types of files?  Included in the .jpeg files could be scans of any document...

  Paint, a part of win7 can open photo files, not that you need to post a photo.

  By default, your image files are stored in libraries > photos, providing any image file has a descriptive name, in your e-mail software, new message, you select 'Attachment' and then in the window that appears navigate to the location of the images, it is an add the file.

  You can also use the free Picasa program to catalog your photos, and depending on what email program you use, there is an option on a photo to send this photo

• It seems to me difficult to 'save' or ' Save as ' with jpg files. Any Suggestions?

  It seems to me difficult to 'save' or ' Save as ' with jpg files. Any Suggestions?

  To add to the response of R_Kelly, if you no longer need CS5, remove all traces of CS5 and CS6 with Creative Suite Cleaner. Re-install new CS6.

  Plug-ins (incompatible) are known to cause this problem, you are faced with.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Photos - photo duplicate was created in folders that end with. jpg.file

  Hello

  I have Windows Vista & recently noticed it seems to be duplicate all my photos.  It creates a new folder for each photo & it is labeled with the name of the photo then. jpg.file. inside of each file is one or two copies of the original photo.  I tried to remove them, but they reappear.

  Please help because it's very embarrassing!

  Thank you

  Helen

  Hello HelenLD,

  Thank you for visiting the Microsoft answers Site.

  In addition to the response of Divya, please relay if the problem occurs when you add a new photo and the program you are using as default program for viewing photos. Please also relay the location of the pictures. You also try to perform a clean boot to verify if a background program may interfere. To do this, please see the link below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Also, Yes, try to perform a restore of the system before when the problem started and then check the issue. To run the system restore, please see the link below:

  What is system restore?

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Jpg file printing - windows cannot access the specified device, path, file

  Original title: I have a similar problem, I can open the jpg fine, I can't print it

  I have a similar problem, I open the jpg fine, I can't print it, permissions are fine. I get the same erorr-windows cannot access the specified device, path, file...

  Hi Janine.

  1. are you able to print documents?

  2. the problem occurs only with a particular image file?

  3. how the printer is connected to the computer?

  4. What is the brand and model of the computer and the printer?

  5. have you logged as administrator?

  Method 1:

  First of all, try to print a test page and check if it works:

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

  Method 2:

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Note: you must have the Windows XP disc to make the SFC scan.

  Method 3:

  I suggest you to turn off all third-party security software and the Windows Firewall and then try to print the file:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Let us know the results.

• Why is still as slow as Vista with copying files from Windows 7?

  I expect Windows 7 to be quick to copy a file, as this has been one of the sour points with Vista.  However, there is no difference!  How can we get back to XP speed regarding copying files in Windows 7?

  I expect Windows 7 to be quick to copy a file, as this has been one of the sour points with Vista.  However, there is no difference!  How can we get back to XP speed regarding copying files in Windows 7?

  Background intelligent transfer service has been my problem.

  Changed to manual/stopped.

  Win 7 slow, moving and copying files, all fixed.

  Update - BITS was not the problem. Do not disable.

  After a new installation on a new HARD drive, I had the same problems.

  I have an ATI FireGL v5600 graphics card. After I have updated to Feb. 2012 pilot, NO more problems.

  I have long suspected that the graphics card was the problem. Problem solved for me.

  Best advice: update all drivers as soon as possible.

• Creating a device with only one key Windows 8 start?

  I recently bought a new HARD drive for my laptop and my original hard drive went too well to get an ISO out of it. My other computers are Windows 7, and I do not have a backup. I found this:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  but it's only for the upgrade of the computer you are using. I thought I saw a boot for 8.1 media where you just need the key, but I can't find anything for Windows 8. Help, please! I don't want to buy a new copy, when I have my key :(

  Hello

  The site offers 8 and 8.1... I don't think that you have to install...

  Run through the process, you will be able to create one or Flash Drive, DVD, record an ISO (better idea)... It can be converted into anything...

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  I don't think that it will work with OEM pre-installed Windows...

  Is there another link to download Win 8.1 which requires no key until it is installed.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Depending on your installation, you may need a temporary license key to win 8.1, then after installation you can enable it with the key Win 8...

  XKY4K-2NRWR-8F6P2-448RF-CRYQH (Windows 8 Professional)
  RR3BN-3YY9P-9D7FC-7J4YF-QGJXW (Windows 8 Professional with Media Center)
  FB4WR-32NVD-4RW79-XQFWH-CYQG3 (Windows 8 [home])
  XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB (Windows 8.1 Professional)
  GBFNG-2X3TC-8R27F-RMKYB-JK7QT (Windows 8.1 Professional with Media Center)
  334NH-RXG76-64THK-C7CKG-D3VPT (Windows 8.1 [home])

• How to create a spreadsheet with labview file

  I just want to create a spreadsheet file. all the comments I've read shows how to create a text file. or reading/creating a spreadsheet, but is possible to create this spreadsheet through labview?

  Hello Ms. METR,

  When you use an entry in the spreadsheet module, it automatically creates the file and replaces it by default.  If you want to add to the spreadsheet file, then you must enter a Boolean variable under the module on "append?

  If you don't need to create the file and then do the worksheet writing because he wants is the path to the file like: "C:\". Documents and Settings\ User\ bureau\ spread.txt"

  Another way you can do is to write about the path to the .xls extension and the icon and everything will work as an excel spreadsheet.

  -David

• I need to create a PDF from InDesign file that people can change in Reader or Acrobat

  I need to create a PDF from InDesign file that people can change (for example, change a name of 'John' to 'Johnny') of Adobe Reader or Adobe Acrobat. I already looked at forms, but they do not keep your police, faces and sizes colors and just do everything is selected as a form of black text, 12pt, Times New Roman.

  Can anyone here help me?

  Vincent,

  If you use Acrobat pro, build your .pdf file, and then save it as (french version):

  

  ... so that everyone using Acrobat Reader (or Pro, of course) can change the file .pdf (with restrictions), add comments...

  If you want to try to 'protect' your .pdf file, you can try with this (in the menu 'Preferences' (french version)):

  

• How is it updated managed with JPG files created in a zone time and copied on a PC in another time zone?

  I took a picture in France 5 / 31 at 13:45. The unit was set to the time European (France).  That evening, I copied the file to the SD card for my laptop that has been arrived at the normal time of the Center. When I looked at the Date modified time stamp it shows 5/31 at 06:45. It was the exact time that the image was created in France by using the CST. Why? How Vista handles this area in this case, and how he knew the zone I was in that?

  Hello Mike,.

  There's no magic here, if I can understand how it may seem so.  Hard drives now use the NTFS file system, which stores all dates and times in universal time coordinated (UTC), formerly GMT.  When you view the file information, Vista applies the time zone selected by the user to correct the UTC value in local time before posting.  Some electronic devices also store files in UTC format, and of course your camera is one of these.

  Mr. Doug in New Jersey

• Unable to print JPG files using Windows MS Office PhotoViewer and Windows 7?

  I can't print a photo (JPG or JPEG file) using MS Office 10 Photoviewer and Windows 7. I followed the instructions in the chapter "How to print a photo" image is able to be consulted in the wizard, but it prints a blank page. I can print the picture using the browser Zoom of Canon. I have a HP Color LaserJet CP3505dn.  All other printing works very well. PDF print perfectly as Word and Publisher files. It is only when I try to print using MS Office Photoviewer.

  I searced the Web for a solution and can not find a. Other forums say it is a bug in Windows 7, but surely it would have been fixed now.

  I have Windows 7 32 bit and MS Office 10. This problem is a huge drawback, and ask a solution of Microsoft as of emergency.

  Fary Walker

   

  Hi Fary Walker,

  I see that you are facing problem like JPG or JPEG file.

  Do not worry! I'm here to help.

  What is the type of network your printers and computer connected?

  For now, let's try the steps from the following link and check:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also contact the manufacturer of the printer to see if there is a hardware problem.

  Come back with more information so that we can help you better.

  Please let us know if you need help on Windows.

• create a link with a file extension that is not exist__

  I have a file .psl that my old windows work with windows media player because it's a phone voice message. When I check the default programs in Windows 7 all the file types are listed, but .psl is not. How can I add a new association.

  Thank you...

  The way faster and easier to associate this file type (.) PSL) with Windows Media Player is to right click on the file and chooseOpen with > Windows Media Player. If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• Creating a table of jpg files external, please help.

  So what I want to do is to load external jpg in an array of MovieClips and then access the main onEnterFrame function. My code is below:

  var imageLoader:Loader = new Loader();

  var imageArray:Array = new Array();

  function loadImage (): void {}
  for (i = 0; i < 9; i ++) {}
  imageLoader.load (new URLRequest ("image" + String (i) + '.jpg'));
  Demonstration [i] = new MovieClip();
  imageArray [i] .addChild (imageLoader);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  I tried to add an Event.COMPLETE function, I found:

  imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
  
  function imageLoaded(e:Event):void {
       var image:Bitmap = (Bitmap)(e.target.content);
       imageArray[i] = new MovieClip();
       imageArray[i].addChild(image);
  }
  
  Unfortunately, I usually only ended up with 1 or 0 images, and errors. I can't seem to properly pass the i
  value, so that's a big problem because the order the images go is key to my program.
  
  Please help me get this working so my image gallery can work, thanks!

  So the problem is that you want in the table in the order I'm right on that?

  See the updated code:

  var imageArray:Array = new Array();

  var imageLoader:Array = new Array();

  function loadImage (): void {}
  for (i = 0; i< 9;="" i++)="">
  [i] var imageLoader = new Loader();

  Demonstration [i] = new MovieClip();

  imageLoader.load (new URLRequest ("image" + String (i) + '.jpg'));
  imageArray [i] .addChild (imageLoader [i]);

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  / * function imageLoaded(e:Event):void {}
  Bitmap of the image: var = (Bitmap) (e.target.content);
  imageArray [index] .addChild (image);
  }*/

  In this case, you are unable to follow if an image is loaded or not. It's easiest to do this. If your images do not come from dynamic sources and are set in the number and the position, you can use this method too.

• I use illustrator CS5. How can I create a svg with rolling file to show a layer?

  In fact, I used illustrator to draw a map, I want to tread a selected area to show a layer more within the same SVG that include information on this area.

  I see, can you please save again the SVG, but the use of the attributes of submission instead of other options in your svg save dialog box.  See my screenshot of the CS5 svg save dialog box.

  What happens now is that the embedded style sheet overrides the display attributes.