It seems to me difficult to 'save' or ' Save as ' with jpg files. Any Suggestions?

Similar Questions

• Save money with project files...

  Hello

  First of all, I'm sorry for my bad English.

  Is it possible to SAVE under... a project with all the files that I used in the project?

  I just edited a clip with a LOT with the files and I need to move this project to another computer, and I don't know where most of the files are.

  Thank you

  Cut or copy your project

  Create the new trimmed project

  to create a new version of the current project which

  applies only to images that you used in the selected sequences.

  Collect files and copy to the new location

  to copy and consolidate images that you used in the selected sequences.

• PSE8 - I can't save RAW to JPG files

  I just started using the Elements 8.
  After opening and editing my Raw files (from cameras Nikon cameras NAVE and Olympus ORF) there is no option to save it as a JPG file. The format options that are available are - PSD, PSE, P.RAW, PDF, PNG, and TIFF.
  If I open a JPG file and edit there is the possibility to save it in JPG format.

  What I am doing wrong?

  You need to convert the image to 8bits first, before the Save. This can be done in Raw Editor, or the editor of PES. In PSE7, the command was Image > Mode > 8/bits

• Cutting tool - save image with lowercase file extension?

  I love the Snipping Tool but want small - I wish that he would save the file with an extension in lowercase, for example, 'png' rather than 'PNG '.  Is it possible to do this?

  (I use Vista Home Prem)

  Delete the PNG and png type.
  ||

• OfficeJet Pro 8500 a A910a - cannot save pdf in multiple files via touch screen

  Hello world
  
  My problem is that I can't save my scans in multiple files (.pdf) If you use the "scan to file function" via the touch screen on my Officejet Pro 8500 A910a a shortcut. It works when scaning manually from the computer, but I need to work from the printer/scanner.
  
  The only way that the scan shortcut saves each page separately (works the way I need) is when you save as a .jpg file, but this isn't the exit, I need. I search for an .xml file change the shortcuts manually, but have not found one. Since my other printer 8500 A909a can analyze each page in a single .pdf file, it must be a question of settings that the A910a does not offer this parameter directly.
  
  I appreciate any assistance with this problem.

  OS: Windows 7 Home Premium 64-bit

  Driver: OJ8500_A910_1315

  Firmware: OJP8500_A910a_1231A

  Hi RnRMusicMan,
  
  the solution you are suggesting is what I have now and the reason why I even started this thread. Analysis each page separately from the touch screen is a pain in the a * and analysis of PC via a scan profile is not the way to go for me either. Thank you in any case, it seems like it is actually a problem in the software and I have to be careful next time, choose a new printer.

  RnRMusicMan wrote:
  

  Hi Koumack,

  Welcome to the HP Forums!

  I see that you are trying to save your scans in multiple files (.pdf) using the analysis of the function of file.

  That's what I could find in my resources:

  How to perform a scan: from the control panel

  Breast of HP Scan, select scan on a daily basis, and then click Advanced settings, select the file tab and check create a separate file for each scanned page. Click OK. It should work from the software.

  

  Otherwise, even if it may be a longer process, as a work around the printer, you can scan a page using the scanner glass.

  Hope this helps and have a nice day.

• Why can't save a .raw file edited as a .jpg file

  I use PSE 10 and with the other catalogs, I had no problem editing my files .raw (6.7version) and then open them and after the new edition, do a "save under" and save as a .jpg file in a defined version.

  now, I'm working with another set of image files and when I try to record the final edited it suggests:

  ED - 1.psd and menu drop-down lists also: psd, pdd, pse, .raw, png, and TIFF. (there are no layers in the file)

  FAQ search failed. I avague remember to have this similar problem there are other versions of PSE years but don't remember the solution. It is the first example of this problem. Other information that might help, it is according to me, this is a "convert" catalogue of PSE 8. I am running WIN 7 Prof 64 bit

  Appreciate any help

  Dan Y

  I returned to a catalogue of different previous > same computer, same PSE10 and selected a previous version of consisting of the original > raw file and saved them edited ed - 1.jpg file and selected the original .raw, complete edition open file it opens in ARW 6.7 as before, then opens the file in the editor of PSE10 and tried to save it as a .jpg file (I did obviously in the last days at the most) (not changes to the computer or programs) and it does NOT OPEN AS a file .jpg as DESCRIBED above.

  HOPE THIS HELPS

  Eventually, you work with a 16-bit image. Before you click the button open an Image in the dialog box camera raw, change the drop-down list for 8-bit and you should then be able to save in jpeg format.

  Click here to see

  

• Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Is there a reason to save the two versions?  The NAVE seems to have no further use other than too much hard drive space.

  Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Why save versions when the DNG is the original and the NAVE seems to just take remote hard drive space?

  I see no reason to keep them, they take a lot of space, one of the reasons to convert to DNG is that they are almost 20% smaller than the ships.

  But it is of course your choice...

• Difficult to save transparency in. EPS files

  Hi all! I hope this isn't a stupid question, but I'm having such a hard time save knockes out groups in the .eps files!

  I'm creating a logo for a client who needs a logo in eps format. In the logo, I have a few areas of transparency. I did it by creating a form, set the opacity to zero, grouping with the form, I want to cut, shape and then the opacity > piercing Group (I hope it has a feel I created see through forms). Save this logo jpg/png being without problem but when I record earnings per share and then place the eps in, say, a new document, the areas that are supposed to be transparent are appearing with an opacity of 100% white (the White is the original color I had them before rolling their opacity). Does it matter if I want to send this eps on a printer to have a model of embroidery made? Is there an easy way to work around this problem? I admit I know very little about eps files so I need help!

  EPS is very old and will not correctly convert piercing group or transparency. Use rather pathfinder knockout of the form.

  Donuts on the left is done with the pathfinder, those on the right with piercing group. The Green shape is just to show transparency. Top of page 2 objects are .eps placed showing the piercing unit operates only not for .eps.

  

  You are lucky that you don't have transparency, or the mixture of modes that do not work in .eps. The gray circle is 100 %K projected 33% in the transparency palette.

  

• When I go to save or download a file, the menu is back, how to make this return to alphabetical order?

  Then when I save or download a file, it is in reverse alphabetical order. I can't seem to make it back, and I'm sure that I changed all the settings that would entail. Any ideas on how to fix it?

  Thank you in advace

  Not sure, it looks like a Windows tweak. The open file dialog box is a feature of Windows. This happens on other programs? You can try to click on the last icon on top, change Detailsview, click the name header, then the Type column header until the record comes on top in alphabetical order.

• "Word cannot complete the save due to a file permission error."

  I have Windows XP.  Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error."  I can always eventally the record via a temporary file, but it's very messy.  "A file permission error" - what on Earth is this?  And what should I do to get things to normal?     Ron Davis, Newcastle N.S.W..

  When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key.  A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen.  At this point, log in as any user with administrator privileges.  After successfully login, you should be able to right click on a folder or file and select "Properties".  When the Properties screen, you should have a 'Security' tab at the top.

  Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders.  (Start-> Run-> "cmd") and then you can use the cacls command.  The Calc command syntax can be found here:

  <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

  or you can type: cacls /?

  "Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.

  HTH,

  JW

• Your history file drive has been disconnected for too long. Pour garder keep save copies of your files, reconnect your player, then run a backup.

  Original title: plug your drive (Important)

  Reconnect your player (Important)

  Your history file drive has been disconnected for too long.

  To keep save copies of your files,.

  Reconnect your player, then run a backup.

  Recently installed window 8.

  Upgrade Windows 7 clean boot.

  Inspiron 580 s 1 TB

  Windows 8.1

  After TWO YEARS, someone should be able to give us a step by step, to "reconnect" an external, USB hard drive!  I unplugged and then plugged it, several times, without success.  I seem to have this problem with one of my disks USB, a Toshiba.  Access the drive through files Explorerer, seems to work, even if it is "disconnected". Historical files only has problems. Strange! Could it be the drive itself, or it is plugged in to the USB port?

  I had the same issue this morning and found a solution that worked for me.

  This post helped: Windows - historic community of 8 files windows does not recognize my drive hard iomega

  NOTE:

  -make a backup copy of the files you delete first! (just in case)

  -J' had deleted my old historical records from the files on the ext. HDD, so I lost no data. I can't guarantee that the ancient history of the file will be there if you remove the configuration files, as described below. In my opinion, it shouldn't happen, but since I have not tried, I can't guarantee that.

  After checking my disk for drive errors (none) and update the drivers (not not mandatory), I went to this location of records:

  C:\Users\your user folder\AppData\Local\Microsoft\Windows\FileHistory\Configuration

  and remove the four files that were on it. Because they determine the configuration of the file history, when I ran the service once again, I could set up my drive as if it had never been used before. I started historic files, and it lets me choose my hard drive and run the backup as it should.

• How to save png or jpg in the library of Cloud?

  I have the idea that you simply move the objects of applications and it is in the library. However, if you wanted to Sage png, JPG, which are the exported on, PSD? It seems that if you import the png and jpg in, PSD or INDD and make them slide library, he adds that if the asset has been created in this program. Web browsers don't support not add them to the library - only when you purchase or download stuff on the market. You can add them through Bridge.

  At a time I remember being able to do this and use the asset in any application, but it seems that the feature is gone. Any help would be appreciated.

  And run an error that says "image type is prohibited" appears when you try to attach a screenshot here. So I hope that someone understands what I'm looking for help with.

  I do not work for Adobe. Generally, you will find personal Adobe in the forums.

  (1) "it seems that if you import the png and jpg in, PSD or INDD and make them slide library, he adds that if the asset has been created in this program.» This is how work CC libraries. For example, if you place a JPEG file in InDesign, and then drag the JPEG as well as InDesign libraries CC illustrations he does not keep a link to the JPEG file. You should incorporate the JPEG format in the InDesign file. When InDesign copies to a library, it includes a file of extract (useful for back into InDesign, where it can be restored) and a PDF file (useful if you place it in Illustrator or Photoshop).

  Then to circle back to your original question, "How do I save png or jpg in the...» Library? "You open them in Photoshop and let them slide to the library.

  (2) ' the web browsers don't support not add them to the library - only when you purchase or download stuff on the market. " You cannot add them by bridge. "Web browsers or bridge are currently part of a CC library workflow. As the diagram at the beginning of the first reference I gave you has pointed out, library workflow is based on the implementation of CC CC desktop applications and mobile applications and use the work in mobile applications and desktop applications.

  (3) "and run an error that says"image type is prohibited"appears when you try to attach a screenshot here.» You are running within the limits of the Jive, which is Adobe software licenses to run the forums. Only files such as PNG or JPEG can tie in the window using the "camera" icon image.

• Illustrator saves a blank PDF file with information on the missing content

  I use Illustrator CS6 on OS X 10.8. Yesterday, I noticed that my PDFs out as files empty with the text

  It is a file Adobe® Illustrator® which have been saved without PDF content.
  Instead or open this file in other applications, it should be re-recorded in Adobe Illustrator with the option 'Create PDF Compatible file' lit. This option is in the dialog box Options of Format native Illustrator, which appears when you save an Adobe Illustrator file by using the Save as command.

  which is in fact a description that usually appears in the files saved without PDF compatibility. It is not document-wise but rather application-wise question because sometimes, even if I create a new Document, draw something in the middle of the canvas and save it. Also, all of my existing documents which record well before, do so now. Basically, I can't successfully save a single PDF file. But it seems that the exported documents must contain the data because they have different sizes depending on the content.

  There is no problem with the backup to format I. I hope this is enough information for someone smart to diagnose this problem because I am starting to be desperate

  You have an idea? Thank you.

  Oh, my friend just advised me to clear the cache and it worked! :-) I deleted files ~/Library/Caches/com.adobe.Illustrator and ~/Library/Saved ask State/com.adobe.Illustrator.savedState and one of them went around :-)

• When I save in the pdf file is massive

  I have 1 page a4 offline ive created with illustrator. Their are no images, just text that is in 2 colors. When I first saved as a pdf, the file has been almost 300 KB. What kind of file size does it, and how can I make it smaller?

  Play with the settings, but not really know im want to do ive got to 80 KB, but that still seems much greater than it should be, or is - not?

  Thank you

  jdldn,

  Try this:

  Create a new empty document to Illy and:

  (1) save it with PDF compatible file create checked;

  (2) save it with PDF compatible file create checked;

  3) save in PDF with Illustrator peacekeeping checked editing capabilities;

  4) Save as PDF file with Illustrator maculated maintaining editing capabilities.

  (1 and 3) gives you the gross size of the packaging of each format, 2) and 4) gives you the gross size of the packaging format HAVE + PDF double anyway.

  The differences up to the corresponding files will show you the actual size of the content.

• Missing Conref when I save and reopen a file .xml in FM9

  I am running on Windows 7 FM9. We use the model files and comes with FM9 rules and modify them to our needs. Currently, I have a problem and I don't quite know how to solve.

  I have two pieces of DITA content, they are the two reference files created using the DITA menu and create a new < reference > file. I entered my content structured in two files and I want to include a document source B conref in my document A. I have insert the conref in a document using the FM DITA menu and save the two .xml files. The files record without any error. When I open the document to the conref text is missing and all that remains is a reference point blank (created by the insertion of the conref). If I open the source document, all is well. I also have an xref in the document and which seems to work very well. My colleague is having exactly the same problem. I'm making reference to a reference with an unordered list element.

  Also, if I save A file as FM the conref remains which leads me to believe that this has something to do with how FrameMaker's reading of the .xml file.

  Any help would be appreciated,

  Laura

  Yes. By default, a conref is 'empty' (open the XML file in a text editor and take a look). Then ensure that the content of the conref should be included in the document, you must enable the option "auto-load". If xrefs are returned regardless of the setting, that looks like a bug to me.

  .. .Scott