Create a graphical path of text file

Similar Questions

• How to give a path of text file

  Hello

  How I choose a path for the txt file. Here, I must only choose the path without filename .txt. Name of the file must be created according to the value of data. I have to choose only e.g. C:\Dokumente und Einstellungen\adhikari-thakur\Desktop\tmp\. I do use it as a constant way but I have no idea how to do to select the browser without choosing the file name. I have attached my vi here.

  Thank you.

  As Crossrulz said to look at the Options to browse (right click on control of path and select Browse Options...). You can also set the startup path, in your case, that it could be C:\Dokumente und Einstellungen\adhikari-thakur\Desktop\tmp\.

  Ben64

• close the reference on "read text file" - Ref num vs prefer class conflicts

  Dear users,

  Vi Analyzer asks me to close the refernce created by VI "read text file". So, I would close a refnum created by primitive VI "read text file". I used a direct wire, wiring by top and bottom of the casting, but each of them attend class conflicts (see the screenshot below). It is even possible to correctly transform the refnum (byte stream type reference) to refer (reference VI generic) and remove the refnum?

  

  See you soon,.

  You must use the close file.

• AppleScript - extraire extract values from a table, create a text file with these values

  Hello world

  Lets say I have a table that looks a bit like this

  

  And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

  

  

  Is it still possible?

  I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

  There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

  Y at - it script-genius out there?

  See you soon

  Florian

  Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

  say application "Numbers".

  say front document to tell the worksheet active

  say ( class is worn) fromfirst table whose selection range

  selectionRange defined in column 1 of the selection

  set cnt to 0

  the value destRange for range

  the value currentList to {}

  -the list of switches

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

  switch and the value in the currentList currentList

  end if

  NTC put to the cnt + 1

  end Repeat

  -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

  Repeat with aswitch in currentList

  " game textOut to '# Script generated with Applescript for switch' & aswitch &"

  # on "& (today's date) &"

  !

  conf t

  "

  set cnt to 0

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

  if (aswitch contains the switch) then

  the value cellCol to address a column of first cell of acellule

  address of line of first cell value cellRow in of acellule

  value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

  the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

  the value desc to the (value of the cell cellRow of column (cellCol + 3))

  " put to textOut textOut &.

  !

  "" IG 1/0 interface / "& aport &.

  switchport mode access

  switchport access vlan "" & vlan & ""

  Description LINK TO "" & desc & ""

  "

  on the other

  -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

  end if

  NTC put to the cnt + 1

  end Repeat

  Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

  textOut write to myFile

  MyFile close access

  end Repeat

  end say

  end say

  end say

• creating or reading text files based in compiled vi (.exe)

  I did my .vi which contains features for reading/writing of settings and write log files. All goes well until I want to create an executable to distribute to colleagues who don't have labview development. When you run the .exe, it seems that I can't create or read .txt or .ini files. No idea how I can import functions open file in read/write/text to my .exe?

  In fact, you try to create or read a file inside the executable.  Of course, this won't work.  Instead, use the Directory of the Application.  It returns the folder that contains your project (in the LabVIEW environment) file or the folder of the executable (when in the execution engine).

  So in your example, you just have to the Application Directory and the path to build to get the location of your settings.ini file.

• Insert the path to the file in the text field

  I'm creating a text tabled at the bottom of a form document that will automatically enter the path of the file (for example. C\:Folder\File) in the document after the document is saved.  I looked at a few Scripts, but nothing seems to work.  I guess it will look something like this on the option "postSave":

  this.rawValue = event.target.path.replace (event.target.documentFileName, "");

  I am a very novice programmer so I don't know if it's even close to right.
  

  Apparently, some of my search parameters have been extinguished.  This question has already been answered before.  If someone comes looking here, this is a link to the page with the answer.

  http://forums.Adobe.com/message/4007317#4007317

  Enjoy.

  FYI: Here is the code I used for the text field.

  Inspection.TextPage.Bottom.End.Directions.File::preSave - (JavaScript, client)

  this.rawValue = event.target.path

• Create the file CSV to edit the text file

  I am trying to convert an image list to a CSV file, so I can import it into a Web site. But the Web site importer does not recognize out of editing text in CSV. I am registering as a simple text file. When I create dummy data in a spreadsheet and the export to CSV is exactly the same when I opened in text editing, but it matter perfectly.

  Any ideas?

  The following thread might solve your issue.

  Text to CSV Editor

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return

• Reading text file and graphic

  Hello everyone. I'm new to Labview and have started using it only a week ago. My advisor gave me a difficult project and I'm stuck. My goal is to recover data from a Keithley instrument by setting voltage and current measurement. I could find a driver to do, but now he wants me to take my measurements and make a different chart that is already in the driver. The graphic I get is for X vs Y that has tension on the horizontal axis and the vertical current. After I receive this information, it is then saved in a .txt file. Which wants me to my Advisor, is to take the values that are recorded and divide (V / I) which is equal to the resistance and then to draw resistance depending on the tension. Since I am very new to Labview, I have trouble reading the text file, strength design values and the tracing result. To add to my troubles, the computers I use have only up to Labview 7.0 Express. If anyone can help me please, it will be greatly appreciated because I would rather graphic using Labview values instead of using Microsoft Excel. Thank you.

  Sorry, misunderstood how you want to display the data. The first table seems to be the tension and the table that is the output of the divide is the resistance. Instead of build table and a graphic waveform, you'll want to use the bundle where the upper entrance is your x axis and the background is the y axis and sire of the output of the present in a XY Chart.

• Copying files using paths in a text file

  I have a text file containing the names of full path for files selected in different directories.   I would copy these selected (only the files not the directory structure) files into a new directory.

  I need to do it using the controls back XP commands (without keyboard entries) because this operation is part of a larger lot stp file

  Someone knows how to do this?

  Rob

  Hello

  see this link:

  http://www.Stu.QMUL.AC.UK/primer/DOS.html

  http://the.Earth.Li/~sgtatham/PuTTY/0.60/HTMLDOC/Chapter5.html

• Text files creating blackBerry Smartphones

  A simple requirement: I want to be able to create a text file on my computer, transfer it to my BlackBerry, then search it later (for example the list of movies, I have "Sahara"?).

  Firstly I find word go does not work, I can't create a folder on the BlackBerry. I need an update for $50, after paying $600 for the BlackBerry.

  I can't find any instructions on how to create the files and transfer them. The Manual deals with music and photos. Is it just a toy?

  Frustrated and very annoyed, can anyone help? Please, I beg you.

  I finally have a working system.  I went on the site downloaded and DataViz Documents to go Premium, but there is an easier way. If you open Word to go and select the menu there is an option to try Premium for a few weeks, it would have been nice to know that. I had all sorts of problems trying to activate after purchase. A lot of the instructions are confusing and the activation key does not work. Obviously the key doesn't care if zeros or SST (number or letter) is used.  The problem has proved that for some reason, I got the Documents go version 1, but the error message was a bad key.

  I then re - download Documents to go Premium 2, PDF to go and Documents to files (so much for synchronization with your computer).  This time, he seemed to turn on. The key was maybe still in memory somewhere. The PDF to go icon does not appear, and was in the download section and I moved it to the Applications.

  I printed the Documents go manual but had to write in page numbers, because they are not numbered which makes the index type of unusable.

  I also printed user guide BlackBerry 9700 (323 pages) but have not found that it is as useful as I had hoped.

  I installed the Desktop Manager and the Documents to go Desktop on my computer and have backed up the BlackBerry, the copied files and photos throughout and have synced files.

  On my computer, in a list of words in my films, I added bookmarks to movies beginning with A, B... to XYZ. which makes them easy to move on. There are also shortcuts in the manual to skip pages and research (or was it find?) function in the menu. Now I can find any movie in the list easily.

  It is possible to use the BlackBerry as a PDA, but you won't find much help in the manual.

• Creating text file of SQL with the addition of counter in the Filename argument.

  Hello
  
  I have a requirement for the creation of Oracle DB text files that I can achieve by ODISQLUNLOAD.
  But the trickiest part is that I want to have a file name + counter Counter should start with 1 for the first file of the day, then 2,... and reset to 1 for each new date.
  
  for example file0001, file0002, file0003, file0004,... file0100 and so on for a day.
  But when I create a file on the next day, it should be created as new file0001, file0002, file0003, file0004,... file0100 and so on.
  
  I may be able to do this using some variables but unable to think how could I achieve this.
  
  Any help would be appreciated.
  
  Thank you and best regards,
  Mahesh

  Hello Manu,

  If the files are loads such as being a batch process, for example, by running a single package, you can exercise a loopback function and store the meter as a variable. It would be very similar to the blog here: https://blogs.oracle.com/dataintegration/entry/using_variables_in_odi_creatin - but you would use the #counter variable in the name of your file. Every day that the package is executed, the counter starts at 1.

  Hope that answers your needs.

  Enjoy!
  Michael R.

• How to import a text file created in Pages (iWork ' 08) for Photoshop Elements

  I'm totally new to work with Photoshop Elements.  I need help.  I want to create my business card in Photoshop Elements with a background image, then a layer of text on the background layer.  The logo and text created in Pages (iWork ' 08).  Can I import this text file to Photoshop Elements and if so how do I do that?  I can't create the same logo in items unless someone can tell me how to draw a circle with a transparent background so that just the outline of the circle watch and the background shows through.  Thanks for any help you can offer.  I have OS X Snow Leopard 10.6.4 and Photoshop Elements 6.

  You are using the wrong tool. Not the shape tool, but the elliptical selection tool, which only makes a selection:

  

  Try again with this one.

• Dynamic text to a text file path

  Hello!

  Can someone help me because I can't understand it... I have a text file in the same directory as the flash and a dynamic text with the name box: news, var: News. I need to load in the file text news.txt. The dynamic area is within other MCs when I do this command on root-stock layer I get this inside the text box:

  _level0.instance10.instance12.scrolledMC.news

  The command I use is simple, but I don't know how to put the correct path in it: loadVariablesNum ("news.txt", 0);

  remove the variable you assigned to this textfield.  causing a problem.

• How to export graphics FCPX captions in a text file?

  Hello world
  After months, I finished a long documentary of 60 min. Then I sent it to an installation of the STC Conversion. Unfortunately, there is a problem with subtitles. I made them with the help of the tool of titles in FCPX. So basically they're spelling.
  For many reasons, the STC guy wants in text format. For me, it will be too difficult to copy & paste all submarines in a text file. So my question is: there is a way (even using a plug-in or a third-party software) to export all submarines

  Thanks in advance for your help

  Nico

  II did not do this, but it should work. Copy / paste the title into an empty project.  Export an XML file. Open it in a text editor and cut everything except the title text.