Create a LOV without touching the FMB

Similar Questions

• Satellite L350 - want to reinstall Vista without touching the second partition

  Hi all

  I want to reinstall Vista without touching the second partition that is full of data.
  I'll be able to do with this procedure? http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm#

  The confusing part is when it says in the explanation that the * entire hard drive * will be formatted (step 2) but on one of the photos, it is written that only data on C: will be erased.
  I have Satellite L350, and the hard drive recovery process is the same as on the connected tutorial before (I'm not completely obviously)

  Hi amigo

  I tested its operation, and from my experience, I can confirm that when you use the HDD recovery procedure as described in the Toshiba document all data saved on the second partition won t be deleted.

  Only if you are using recovery DVD (please create a) will be formatted the whole HARD disk.

• Toshiba 32AV615DB reduce while watching her without touching the controller

  Hello.

  My TV acts as if there is a sign to extra distance.
  While watching, the sound will reduce without touching the controller.

  It is not possible to market. It will scroll together various displays.
  Buttons on the side of the TV do not work.

  You can activate the TV market, sometimes who will work for a while!
  Another day, it will work perfectly.

  Any suggestion is welcome.
  Thank you

  I found a thread that describes a very similar TV acoustic behavior:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70847

  It seems that the Dynamic Volume is enabled in the settings of your TV.

  + Audyssey Dynamic volume® control volume levels in order to eliminate the strong points and lift the soft dialogue for film and television more enjoyable viewing. +
  + In the sound menu, press up or down to select Dynamic Volume. +
  + Press left or right to select On or off.

  Check it out. Maybe it helps.

• How to create a Viewer without buying the image? I want to be able to save the images I'm looking a subject without purchase or download.

  How to create a Viewer without buying the image? I want to be able to save the images I'm looking a subject without purchase or download.

  After talking to the Customer Service, I now get it. Thank you.

  That is to say: down arrow recorded a watermark image in the gallery without you buy. You can download an overview lores on your desktop for motorhomes with this same arrow, but it is unfortunately a watermark (unlike the DPC). You can also copy and send a link to the Gallery clients to review before you buy.

• create a tablespace without specifying the path to the data file and the name

  Hello
  
  Is it possible to create a tablespace without specifying the name and the path of the data file.
  
  For example: just specify the name of the tablespace and the size of the data file, the data file must be created in a default location with the default name? Is this possible?

  user13364377 wrote:
  Hello

  Is it possible to create a tablespace without specifying the name and the path of the data file.

  For example: just specify the name of the tablespace and the size of the data file, the data file must be created in a default location with the default name? Is this possible?

  The use of the files managed by Oracle
  Internally, Oracle uses standard file system interfaces to create and delete files if necessary for the following data structures:

  * Tablespaces
  * Online redo logs
  * Control of files

  Through initialization parameters, you specify the directory of file system to use for a particular file type.
  EXAMPLE:
  The following parameters are included in the initialization parameter file:

  DB_CREATE_FILE_DEST = ' / u01/oradata/sample.
  DB_CREATE_ONLINE_LOG_DEST_1 = "/ u02/oradata/sample.
  DB_CREATE_ONLINE_LOG_DEST_2 = ' / u03/oradata/sample.

  The following statement is issued at the SQL prompt:

  SQL > CREATE a DATABASE sample.
  SQL > CREATE TABLESPACE tbs_2 DATAFILE SIZE 400 M;
  SQL > CREATE UNDO TABLESPACE undotbs_1;

  check the link for more information:
  http://download.Oracle.com/docs/CD/B10500_01/server.920/a96521/OMF.htm

• Create group email without disclosing the addresses of recipients

  How can I create an email group that simply shows a group without disclosing the e-mail addresses or the names of those who are included in the Group? As a PTA group, co-op, etc.?

  This is for Outlook Express, but is the same for WinMail. The names of some references may be different. (i.e. of AddressBook = Windows Contacts, etc..).

  To create a group of contacts:

  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.

  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.

  Note

  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.

  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).

  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.

  Bruce Hagen ~ MS - MVP [Mail]

• Connection problems. Cursor "turns" without touching the keys. Keypad lock. Tracpad disconnects. Need to close and restart before both work again. Any guidance will be appreciated.

  CONNECTION PROBLEMS.

  CURSOR "Runs" AFTER I TOUCH a BUTTON AND THEN the KEYBOARD LOCKS AND TRAC PAD DISCONNECTS.

  NEED TO SHUT DOWN I HAVE MAC AND TURN IT BACK ON AND KEYBOARD WORKS OK.

  IT IS AN INTERMIITANT BUT AN ANNOYING PROBLEM AND I WOULD GREATLY APPRECIATE SOME GUIDANCE.

  Thank you

  Hello

  Please, do not type in capital letters, which is considered yelling that I am sure that you are trying to do.

  Have you had the opportunity to read If your Apple wireless mouse, keyboard or the trackpad will not work as expected - Apple Support ?

• Create variable FileGlobals without deleting the existing, using the API of TestStand, LabVIEW

  Dear community OR,.

  I create the FileGlobals Variables as described in the attachments. Variables are created, but at the same time, all the existing ones if the FileGlobals file is deleted. Could someone help, please, how can I insert variables, no effect on already existing ones?

  Thank you very much in advance!

  I struggled with this problem all morning, and... I realized that this code does not remove the FileGlobals variables. Code to create the fact, that runs before this code... So I corrected the code - it works now!

  Thanks for all the help, I found interesting things of couple - I did not know this increment of the changes made to the file.

• Pavilion 500-307nd: create additional partitions without endangering the recovery option

  I just bought a new HP pavilion 500-307nd, it has a 2 TB hard drive. Currently, it contains the recovery partition (10 GB), the rest is used as one and only one primary partition. I would like to divide this (close to 2 TB) a partition into three partitions: a primer containing the system and software, two for the storage of data only. The recovery partition will remain intact. That would be a problem? I'll always be able to use the if necessary recovery partition?

  Bart, welcome to the forum.

  Here's a guide that should help you.  Before you begin you must make a backup of all your personal data.  If you have not done so, you should do the System Recovery discs for the computer, too.  This will allow you to recover the computer if you have problems creating the partitions.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Acute and serious bars Flash on the screen intermittently without touching the controls on hp Pavilion dv8 1290

  Everyone experienced this nagging problem of having the bass and treble bars Flash on the screen of the PC, w/o tounching users the sliders control on top of the keyboard on a hp Pavilion entertainment pc dv8 1290?

  Tried the update some drivers not avial!

  Hello

  Have you applied the firmware update for the capacitive strip at the following link?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96360-1&cc=us&DLC=en&LC=en&OS=4063&product=4207724&sw_lang=

  Kind regards

  DP - K

• Download and test the new CC without touching the old CS4

  As I want to test new programs in CC and still have the older CS4 left and running on the same computer.

  Is there a risk that the old Cs4 can be dsiturbed? I have mac.

  Veera

  There is no problem to use both.

• Rename a layer without touching the mouse?

  When you export files from Illustrator, I receive a ton of layers named < path > and < group >. I want to quickly rename these layers in Photoshop.

  I'm using Alt-[&] - to move up and down my Layer palette, but I did not understand how to change a layer name other than a double click on the name (which takes a hand on the keyboard). Is it possible to rename a layer using the keyboard only?

  If you use CS6 things are a little easier.

  Double click on the layer name to retype. Then press tab (or shift tab for the other direction), and the name of the layer is highlighted and ready to re-enter. Continue to do the same for the remaining layer names.

  Paulo

• copy the select value in the textfield of LOV, and allow the user to modify

  Hello
  I have a datablock with 20 records and each record has a comment (say field_comments) fields. I would like to allow the user to choose LOV populated predefined comments (say lov_comments) and add a few additional comments after they choose the value of LOV.
  
  I created a LOV and added the return type 'field_comments' in column mapping properties. When the user clicks a button, LOV opens. They choose the value of the LOV and the value goes to the field 'field_comment '. The problem with this approach, the user cannot add their comments after selecting in LOV.
  
  I tried this too much. I created another area of non-visible text (i.e. fake). In the LOV, I added "dummy" field as returntype. In the dummy field, I created the trigger 'After the CHANGE', which basically says: block. field_comments =: block. Mannequin.
  
  But, the user must click another field to display the value selected from the LOV. The values of the 'field_comments' is not being updated as soon as the user click on the 'OK' button in the LOV.
  
  I'd appreciate if someone could give me feedback and help to solve my problem. Thank you for your help.
  
  I thank.

  Well, I tried exactly what you posted and it allowed me to SELECT from LOV, then CHANGE/ADD new text in front of returned value in the field. He recorded in the database and questioned without any problem.

  Your article is allowed to INSERT/update? If this isn't the case, then set yes "Update/Insert allowed" and attach your LOV to the element and set "post to list" No.

  You can also see if you have any validation done on WHEN-VALIDATE-ITEM trigger or after CHANGE which will fail because you change LOV populated values.

  I hope that helps!

• How can I develop a new version without changing the old?

  I have an air application that I am on the point of build and exit.

  What is the best method to develop new features without touching the original file of the 1.0 project. I can't copy and paste into flash builder.

  And I don't want to start a new project for version 1.1, how guys do you deal with that? Export the fxp maybe?

  Version control.

  I suggest Git for a simple local set up. And if you want a nice graphical interface, or you can integrate directly into Eclipse (Flash Builder).

• Creating a LOV

  Hey, I'm trieing to create a list of value (LOV =) but it does not work.
  Here's my response:
  
  SELECT KUNNR, KUNNR Ruy
  OF DONNEESSAP. SAP_KNA1VV
  WHERE vkorg = "0001"
  order by 1
  
  In the SQL Studio, it still works, but by creating a LOV, I got the Message of ERROR:
  
  "LOV query is not valid, a display and a return value is needed, the column names must be different. If your query contains a query online, the first CLAUSE in the SQL statement must not belong to the query online. »

  Hello:

  The schema of analysis the namespace of your application has the right to select on the view/table named DONNEESSAP. SAP_KNA1VV?

  CITY