Create an offset

Similar Questions

• Experience that bothers UI

  Dear Sony Xperia

  I have several questions about the latest Sony user interface I have now in my Compact Z5.

  1: I couldn't put a widget on the home screen. A simple widget like weather from yahoo and other weather apps I tried, cannot be put to the homescreen, I know why? U of N can solve this problem? I tried to restart n reinstalling, but nothing works.

  2: also, why in this user interface, everything all over again whenever the apps are interchaged.
  Example 1: I am reviewing my Facebook apps, then comes the WhatsApp notification, so I scroll to the bottom of the notification & view the. I would then go back to Facebook. Unfortunately, Facebook will begin again on the latest news of food. Why should not start from where I left off earlier? While I need not scroll down again and again to jump news feed I've been through? Because reconciliations apps is so common, and sometimes within seconds.
  Example 2: Sony support apps... You will also start across when switch apps. It will start all over again when I went to WhatsApp for awhile. If you need to redo everything again
  And many other applications

  Hope everyone is the point I wanted to say
  Please improve and fix it

  Finally, when Xperia will update Marshmallow while I can maybe improving experience?

  Hoping to hear from you soon.
  Mind my English please...

  Thank you

  There is something in place, that's what I'd do. Fix the phone with PCC and only download yahoo widgets and report back, keep in mind that yahoo apps are poorly coded and create the offset on the phones.

• 802.3ad - N4032 - 1679U-RP Qnap PowerConnect

  I need to get Qnap 1679U-RP with Qnap 10 G dual-port card (Intel X 520 based) to connect to stacked 2 x N4032 routing port 802.3ad

  On the Qnap there is not much available settings:

  Port Trunking & mode IEEE 802.3ad

  I have configured as a dynamic PO1 on the switch (s)

  #show console interfaces port-channel 1

  Ch-Type Hash Type Min-links Channel ports local FRP

  -------   ----------------------------- -------- --------- --------- ---------

  PO1 Active: 0/19/Te1, Te2/0/19 1 7 dynamic disabled

  Type of hashing algorithm
  1 - the source MAC, VLAN, EtherType, source module and port Id
  2 - destination MAC, VLAN, EtherType, module source and port Id
  3 - source IP and TCP/UDP source port
  4 - destination IP and destination TCP/UDP port
  5 source/Destination MAC, VLAN, EtherType, MODID/source port
  6 source/Destination IP and port TCP/UDP source / destination
  7 - improved hash mode

  But I have no connectivity at all

  SEB

  When you create the OFFSET on the mode of the switch channel group 1 on the Page 593 ftp.dell.com/.../networking-n4000-series_Reference%20Guide_en-us.pdf

  For server R2 2012 choose static grouping blogs.technet.com/.../nic-teaming-in-windows-server-2012-do-i-need-to-configure-my-switch.aspx

• interoperability of the aggregation of link with Nortel layer 2/3 copper GbE Switches and DELL 6200 Series

  is it possible to create an OFFSET using LACP between a pile of 6224 dell and nortel switches layer 2/3 ethernet (reference 32R1860) GbE switch modules

  Im sure I have the command of the nortel switch, but not sure about the DELL printer.

  How to check the link is active?

  You can define a dynamic LACP LAG with this command

  Console # channel - group 1 automatic mode

  Auto is the key word, the other option is on where is in turn on blindly without confirming the connection is valid.

  When you use the automatic command, that he should not work if the other side is not also configured to use LACP.  It is built safely to avoid a loop. Who can go unnoticed.

  Use the show command to ethernet lacp in privileged EXEC mode to display

  Information on LACP Ethernet ports.

  console #show lacp ethernet 1/g1

  This command should provide information confirming that the LAG is active.

• Best link between SG500-52?

  Hello

  What is the best (fastest) way to interconnect two SG500-52?

  I'm on a budget of 2.5 k 30 ports floor 1 & 2, 30 floor gigabit. The bandwidth on the network is not very high, but the link between the two switches would be the neck of the bottle I think. What can I do to optimize the flow on this link? I can pull the fiber or several cat 6 cables, but I can't use the coaxial cable of 5 metres 5G (there is no other option to use this port as 5G?) because of the physical distance between the switches.

  I would be able to create an OFFSET on both switches Say 5-10 (normally access ports, not the uplink (sfp) ones) ports?

  Or for the budget, any configuration with 2960's would fit (better)?

  Sg500 use the 5 gig links or if youre on budget, 8-port aggregation of links. SG500X would be the 10 gig links

  -Tom
  Please mark replied messages useful

• Make custom arrowhead. Cannot use spacing customized to an anchored object that is "path"?

  Hello world

  I build a model to use for the preparation of the documents for the brand of the company. I'm trying to find an easy way to make custom arrows that we will use for the legends (see below).

  

  What I want to do is to find a quick way to create this arrow to use for captions in my document. The main elements are the tip of the arrow 2-tone and the circle for a tail. I know that Indesign has a tail of the arrow circle but the problem with its use, it is that the color should be the same as the race and also the size of the circle is determined by the size of the race. As far as I know, Indesign does allow you to change those.

  I tried to use this type of path:

  http://InDesignSecrets.com/making-custom-arrawheads.php

  It works very well, but you can still see the path because the path is flush with the edge of the anchored object and the end of the path is visible behind the anchored objects. I think to be able to define these objects anchored with custom positioning would solve this problem. The problem is that I don't think that Indesign lets you define objects anchored to the positioning personalized text on a path, because this option is grayed out in the anchored object options.

  I was wondering if there is another way to create an offset for anchored objects or if there is a better way to make these custom arrow heads.

  Could there be a way to use objects from a library to create custom arrowheads? Also, is there a way to do this while a style object so that arrows can to shoot quickly and then simply apply the style of the object to get the correct formatting?

  I know that this is not possible and may have to be done manually, but I'll try to find a quick and easy way to make these arrows so that other people who have to use this model won't screw up their.

  Any help/ideas would be appreciated! Thank you all!

  Jacob F.

  Well, if anyone is interested, I sort of solved the problem.

  First, it was decided that the rounded tail of the arrow and the line should use the same darker green color. I still had solved the problem of adjusting the size of the circle but this trick of Eugene Tyson that:

  change the size of the arrowhead?

  Once I did, I made a style of object out of it, so that I can quickly draw lines, and at least add the tail quickly.

  As far as the head is concerned, I still have not found an automated way to do, but I have an easier way than what makes from scratch. I was directed in the right direction with the help of type on a path, but I was able to get the arrow flush with the end of the path and not past it. I saw a tutorial on Lynda.com, that shows you how make arrowhead custom and found a missing piece of the puzzle. It turns out that InDesign uses the same grips that you get when you add the type on a path in Illustrator. The trick to get the anchored object overlap the end of the path is to adjust the object anchored using these handles... After that, the axis of the anchored object y can be adjusted manually with the selection tool. Note that only the y axis (which is actually your baseline) can be modified because InDesign does not allow embedded objects that are typed to a path using a custom positioning. At this time, I don't bother centering the text on the path because the y-axis for my form must be adjusted in any case.

  So that's the solution I came up with that. If someone wants to share a solution better or more automated, I would really like to hear it.

  Thank you!

• Offset path does not create a separate path

  CS6 Mac

  Looks like my Illustrator is listening outside. When I apply offset path of the compound object, Illustrator does not create a separate path for me, but both the offset and original sort to group together:

  https://www.dropbox.com/s/xiu3xqcictx0ku0/Offset_problem_1.PNG

  I am trying to create an effect like this tutorial on youtube. But as the offset path does not create a separate path, I can't duplicate the same effect.

  No idea on how to solve this problem would be appreciated.

  Did you use the object > path or effect > path? Here is the difference

  

• JavaScript to create indexes, accumulating the character offset

  HI wonder-workers in script-index

  I have a script that I run on a single document of two or 160 pages of a list of terms to index.

  He does the job, but has a tendency to misplace the index gradually plu markers offset from the actual location of the actual target word.

  The direction of the offset changes depending on whether I increments to the top or to the bottom of my list of txets returned from the story.search.

  With the help of CS2, there are notes.

  The offset is not exactly = number of referrals met so far, but largely move with about 60% of it (I have not checked it in detail) with 1000 points in a few pages later have on an offset of 50char of the s word in my file list.

  Very little havewords in my index notes, although 1 or 2 I am OK to catch them just.

  I tried réinvoquant story.search to create a new pageReferences.add list text after each (or 1/5)

  in the case where the insert of the index mark creates the shift - but this makes it just run more slowly and does not solve the problem.

  Most of the refs index will be correct but there will inevitably be some that drop from page to page x-1 x

  Any ideas where I should look?

  The monarticle var becomes a copy or a pointer to the changing history?

  for (var s = 0; s < doc.stories.length; s + +) {}
  var monarticle = doc.stories.item (s);
  
  If (myStory.length > 800) {/ / avoid the small objects-history (notes, headings, etc.)}
  toIndex = myStory.search (myUpper); With drop cap index entry in this text of story
  If (toindex.length > 0) / / found the text at least once...
  {
  newtopic = doc.indexes [0].topics.add (myUpper);
  r = 0;
  for (i = toindex.length - 1; I > - 1; i--) / / this way brands DRIFT after Word
  for (i = 0; I < toindex.length; i ++) //marks DRIFT before term
  {
  r ++ ;
  Try
  {
  newtopic.pageReferences.add (toindex [i], PageReferenceType.currentPage);
  If (r == 5) {}
  toIndex = doc.stories.item (s) *.search (myUpper); costs of time, help? restart DERIVES every 5th round
  r = 0;
  }
  }
  catch (_)
  {
  many of them will be the places of reference...
  Alert ("' problem of Index >" + myUpper + "< item" + i + "can be in a note" ');
  }
  

  Good tests! I wasn't sure what version of Indesign had the problem of the terrible table, CS1, or CS2, he was apparently CS2. The problem with tables was that they slowed down the scripts to a pathetic crawl. It seems that they affect scripted index as well.

  By placing all of the tables in their own frames I had the problem of overall speed.
  Maybe it works for the drift of the index as well. Worth a try.

  Peter

• FPGA/FPGA adapter creates 250 mV voltage offset

  I use a high-7971R FPGA in a chassis SMU-1073 with the adaptation Module 5782 (DC coupling) and 2016,08 device drivers. When I turn on the chassis and my computer, nothing strange happens. When I try to run something on the FPGA, however, things get weird. Each piece of code works exactly as it should, but as soon as that 'open FPGA reference' finishes running the adapter begins to produce a voltage mV to 0 to + 250 Ai and AI 1. It doesn't go to AO 0 or 1 AO. This shift of power disappears temporarily as long as 'Reference FPGA open' or "Close FPGA reference" are running, but the only way to get rid of the tension of offset entirely is to restart the chassis. Can someone explain to me why this is happening and how to fix it? The FPGA code, I am running can handle a small shift, but this shift seems to be to saturate the signal.

  To see the shift: branch I HAVE 0 and AI 1 directly in a 1 M complete oscilloscope.

  It is planned. CDA on this FAM (and more high-end a/d converters) have a range of sampling which is not centered around zero. The front end of the compenstates of the FAM for this by applying an offset from the signal which would appear to the user that the range of the ADC is centered around zero. What is different between this FAMILY and other instruments, is that it is not an additional circuit preventing that this lag observed a user of height of the output of the analog input.

  You see the shift happen to reference open FPGA is because that's when power to the GPA is activated. The shift should not have an effect on reading which provides the analog input. Just make sure you have impedance corresponding to the source of the signal at the analogue input and you should be good.

• Offset path creates 2 additional paths not 1

  Hello world!

  Please forgive me I'm not a graphic designer, so here's my noobie question lol.

  So I prepare a document for printing on an epilog Zing Laser 10000. I have a plan for a cut I have to do, but I need to consider for the dewatering of the laser.

  That's what I'm starting with:

  

  I'm trying to select circles and use the offset tool to make new circles in the same places a little smaller. However, when I apply the lag I get a new circle outside the path and inside.

  Here's what I mean:

  

  As you can see there is now a larger circle, but also a smaller circle, but the small circles do not even have a circle plus small only one more despite the fact that I entered a negative offset.

  What can I do to get the smallest circle in all the circle? I'm still on the right track regarding the delay of path tool? Word game.

  Thanks for all your help! Your time is appreciated.

  Select a path and press Ctrl + J

  or

  Object-> Path-> Join

• No idea how to create this animation in Apple Motion?

  I don't mean to recreate this, exactly the kind of radio wave effect where the circles to life outside while fading in the centre and on the outskirts.

  I don't know it can be done with a simple circle and the Replicator but I just can't work, all advice appreciated.

  tting-a-signal-around-the-world-with-aud https://www.Shutterstock.com/video/clip-3188530-stock-footage-an-antenna-transmi...

  How is this:

  

  apply the gradient to a new group generator

  Set the radial gradient, Center

  Add the gradient filter Colorizer, rehearsal, set to 10

  adjust the gradient to create circles 'sharp '.

  apply the behavior of the ramp for offset, start to 720 °, put an end to 0 °...

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Cannot use disk utility to create the partition of the free space on the external USB drive.

  I have a red 3 TB Western Digital drive in a USB hard drive docking station.

  The reader is GPT, and I have two volumes on it (a single volume is "Microsoft reserved", another volume is NTFS).

  The other part of my drive is 1.5 TB of free space. I want to create a new partition with free space so that I can put backups Time Machine encrypted external hard disk.

  I checked free space on the drive with my Windows machine:

  
  DISKPART> list disk
  
  Disk ### Status Size Free Dyn Gpt
  
  -------- ------------- ------- ------- --- --- 
  
  Disk 0 Online 167 GB 20 GB
  
  Disk 1 Online 465 GB 0 B *
  
  Disk 2 Online 2794 GB 1526 GB *
  
  DISKPART> select disk 2
  
  Disk 2 is now the selected disk.
  
  DISKPART> list part
  
  Partition ### Type Size Offset
  
  ------------- ---------------- ------- -------
  
  Partition 1 Reserved 128 MB 17 KB
  
  Partition 2 Primary 1267 GB 129 MB 
  
  DISKPART>
  

  DiskPart displays 2 partitions - a 128 MB and the other GB 1267 with 1526 MB of free space.

  I took the hard drive of my MacBook Pro running OS X El Capitan 10.11.3 and pulled towards the high disk utility, but for some reason, that it does not resemble the disk utility it is to see the free space, so I can't create a new volume.

  Here are a few screenshots:

  ... of the physical disk in disk utility (notice how it doesn't seem be all unallocated space on the disk to create a new volume):

  

  ... of the NTFS volume in disk utility:

  

  ... of information for the drive in disk utility:

  

  ... of information for the NTFS volume in disk utility:

  

  ... of the partitioning settings page. Notice how the sign is grayed out (I can't create another partition):

  

  

  I'm a new Mac user. My company recently gave me a Mac, so the first thing I want to do is to create a new partition on this external USB drive to put backups Time Machine figures on it.

  In the research I did find a way to do it on a mac computer without erasing the drive and starting over. But you can go to your windows computer and partition the free space of disks. Then use the mac to set the free space as mac os extended journaled. Here's what I found. http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html the only other way would be to copy the file on the external drive, somewhere, so you can delete it and re partition for windows and mac. Then reinstall windows files. I'm not familiar with windows systems.

• Ideas on how to create a sine wave between 0 and 10 V with NI 5412?

  Hello

  I tried to create a sine wave from 0 to 10 volts on a 5412 OR. I have 2 problems and I have a question:

  (1) I can't generate a waveform with lag, even when using the examples of NEITHER.

  (2) the value of the offset, that I can set the camera is of +/-25% range of amplitudes. Do I have to create an arbitrary waveform myself?

  (3) in the brochure it says I can get 12 v peak-to-peak. Does this mean that it is between-6 and 6, or it is between 0 and 12?

  I would appreciate it if I could see an example.

  Thank you very much.

  Hi, several notes:

  (1) the peak to peak voltage is 12V. For example, it can operate between 0 - 12V.

  (2) the shift of 25% limit is for a given wave. That means assuming that it will create a wave, it cannot compensate for 25% of the beach. The solution is to create an arbitrary wave (e.g. a sine between 0 and 10 V) and the function generator to create rather than attempt to compensate for a sine wave.

  Thanks for the help though.

• Square wave generation phase offset problems using PXI6602

  Hello

  I'm generating 2 signals using an incremental encoder AB using a PXI6602 to simunlating.

  Signals must be offset square wave, 34,133 Khz, by 90 degrees, which I'll put dividing (1/frequency) into 4 and put the result in the knot of late initial .vi DAQmx create channel (frequency impulse Co generation).

  Resulting signals phase difference however does not consistantly measures 90 degrees. 1 in 5 rounds of the vi has at least a matter of resulting in a test phase angle has failed.

  Can someone suggest a stable solution for this.

  Thank you

  David

  John_P1,

  After posting the previous comment, I went back to play some more with him, and he now runs and returns a positive result every time.

  The change that has had the desired effect was for the type of trigger that I had selected (Advance Digital Edge). Change this to start digital dashboard whose value fall of dash, the error disappeared.

  Feel free to always criticize the vi and suggest / modify to improve stability / efficiency.

  All feedback is voluntarily accepted

  Thank you

  David.