Offset path creates 2 additional paths not 1

Similar Questions

• Offset path does not create a separate path

  CS6 Mac

  Looks like my Illustrator is listening outside. When I apply offset path of the compound object, Illustrator does not create a separate path for me, but both the offset and original sort to group together:

  https://www.dropbox.com/s/xiu3xqcictx0ku0/Offset_problem_1.PNG

  I am trying to create an effect like this tutorial on youtube. But as the offset path does not create a separate path, I can't duplicate the same effect.

  No idea on how to solve this problem would be appreciated.

  Did you use the object > path or effect > path? Here is the difference

  

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How to add several tracks with offset path?

  Hello

  I would like to create a script that can create multiple strokes with offset path (incremental or material (user will enter value))

  Is it possible to add several traces? I have found no examples in the script reference or elsewhere.

  Note: Mixtures does not give exactly the same results because sometimes especially when you are dealing with fonts outline paths is to be wrongly mixed a way.

  I'd be happy if someone give at least the main command loop.  I'll try to rest and will share here because I find the solution.

  Thank you

  Best regards.

  

  OK, I'm going to assume your sub windows through the capture in the opening screen post.

  This is a completely different approach.

  This example uses executeMenuCommand so is only compatible with CS6 +.

  and Windows is only used from VB

  //-------------------------------------------------------------------
  
  // Offset Path in apperence panel
  
  // Script by Qwertyfly
  // contact [email protected]
  // version 0.1 beta
  
  //-------------------------------------------------------------------
  
  //number of offset paths
  var Qty = 5;
  
  //amount to offset
  var Offset = -5;
  
  //units to offest in
  var Unit = "px"; 
  
  //time to wait in milliseconds before sending keys.
  // more time is slower but more stable
  // I was able to run this with it set to 0, but a little bit of a pause is a good idea.
  var wait = 10;
  
  //-------------------------------------------------------------------
  function FillDialog_Windows(distance){
      var VB = [
          'WScript.Sleep ' + wait + '',
          'Set WshShell = WScript.CreateObject("WScript.Shell")',
          'WshShell.SendKeys "' + distance + '"',
          'WshShell.SendKeys "{ENTER}"'
          ].join('\n');
      var VBgo = new File('~/go.vbs');
      VBgo.open('w');
      VBgo.write(VB);
      VBgo.close();
      VBgo.execute();
  }
  function MakeStroke(offset){
      app.executeMenuCommand('Adobe New Stroke Shortcut');
      FillDialog_Windows(offset);
      app.executeMenuCommand('Live Offset Path');
  }
  
  for(var i = 1; i		   

• Offset path

  Hello

  How can I create a path by a path offset / adjusted witch is not centered?

  for example: from top to bottom: 1 pt black, white, 3 pt pt 2 white. See also picture as an attachment.

  I tried with the appearance and the tool offset path attributes, but did not get the required result. Its possible to copy the path and adjust, she that would surely not for curved paths.

  Thanks for any solution!

  

  CAVOK,

  How can I create a path by a path offset / adjusted witch is not centered?

  for example: from top to bottom: 1 pt black, white, 3 pt pt 2 white. See also picture as an attachment.

  Art forms are your friends.

  Assuming that you mean... 2pt black, you can:

  (1) create a black fill/no race 6 pt high rectangle (whatever length);

  (2) create a white filling/no 3pt race high, placed above the black rectangle with 1pt below and pt 2 above;

  (3) both select and drag the button new brush in the shapes panel/palette, select Art Brush.

  Apply to paths and enjoy. You can change the relative thickness by changing the weight of the race of the track of 1 pt.

• Could not initialize the TestStand engine. Path not found.

  Hi, so far I have installed and removed TestStand 3.5 3 times in a row, just to still get this message (see subject) when I try to start the sequence editor. I even uninstalled all the software of NOR I had on this laptop reinstall the whole... Nothing has worked. Now I wonder, is that what I'm doing wrong? What can I do to get TestStand running?

  Well well, on this message when I hit OK, another message

  The sequence editor does not start. Cannot create the TestStand engine.

  Hit OK on that message again just puts an end to the sequence editor leaving me with a white screen.

  Any ideas what is wrong?

  best regards and thanks in advance.,

  Ingo

  Ingo-

  Sorry for your frustration. Your idea to uninstall and reinstall should work normally. The second message is just the result of the first error, so we need to understand which path is not found, and we don't know why this happens. I tried to force my copy of TestStand 3.5 to fail like messing around with the installation and I couldn't find a way to cause the error "path not found". I had a lot of other more detailed errors, but I have been unable to reproduce your message.

  A few questions:

  (1) what operating system do you use?

  (2) you install to the default location under Program Files? You use a network somehow path?

  (3) you have permission to write the locations on your system?

  (4) what are you logged in as long as administrator during the installation, reboot and start the sequence editor.

  (5) have you messed with any of the registry under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\TestStand\3.5 settings, where something is wrong manually?

  (6) added user under the TestStand directory components that could somehow load and cause a problem?

  If you have an installation on the system, you can quickly try to empty the directory Cfg under TestStand, so that it generates new copies of these files.

• To connect to a shared folder between PC - error Code 0 x 80070035 "network path not found."

  I have a client with 8 computers on a workgroup network.

  Among youth, 2 computers not talking to each other or to connect to shared folders on the other drive. Both computers will speak on other computers on the network (wireless).

  I looked at all the solutions that have been validated for the message Error Code 0 x 80070035 "network path not found." and none of them have solved the problem. I can't ping one computer to another. I noticed that when troubleshooting on the PC (both are desktop windows 7), 'client' that when I ping the other PC it returns an IPV4 (192.168.x.x) address, but when I ping another PC on the network returns an IPV6 address. I tried to turn off IPV6 adapter in the network adapter settings. It made no difference. I searched several 6to4 adapters in Device Manager, but only 1 exists. Turn it off did not seem to make a difference. As I said, both PC's are accessible by other computers on the network (wireless), but they cannot access each other.

  Restart both computers several times (including cold starts and stops).

  The only one I don't have not tried yet is releasing and renewing the IP address on both.

  Any suggestions?

  Well I fixed it myself.

  In this case, there was a number of things I've done.

  First of all, I checked to make sure that the firewall is not the issue. It wasn't.

  Secondly, I checked the network connection to see if it has been set to the office network. One of them was, and that we have tried to connect to a was created for the Public network. Who changed the network and restarted.

  Who has not solved the problem.

  Finally, in desperation more than any other thing, I restart the network modem.

  Guess what? That fixed the problem.

  So, I guess it was a problem of ARP table or some other problem. When I tried to ping from the "client PC' on the shared drive PC, the IP address was 192.168.1.65. When I got the customer go to the drive shared PC and check the IP address it is 192.168.1.69.

  Restart the modem and the "client PC" has solved the problem.

• Cannot run most of the apps and regedit by all means indicated by the path not specified not

  Original title: need help ASAP

  I can't run most applications and by all means regedit it says path not specified

  I tried to do some tinkering with regedit and install an application on another drive instead of C and ended up having failed, but kept a copy of the original registry values.

  set these registry values back and restarted after the problem I

  Hello

  See the second Option in the last link I posted in my last answer (and below here):

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  
  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Troubleshooting system error: 53 - path not found network

  Hi, I wonder what my kids are doing when they use their computer. I read on netbios hacking, but it won't work. When I am typing "net use G: \\192.168.x.xxx\C" the computer just says "error troubleshooting system: 53 - path not found network".» How to fix this? or y at - it another option?

  This means that there is no share called 'C' on the machine whose IP address is 192.168.x.xxx. Experts in networking forumw7itpronetworking /threads ttp://social.technet.microsoft.com/Forums/en-US/ would be able to tell you how to create this share.

• Cannot connect Windows 7 to the field get error network path not found.

  Title: original network path not found

  I have a professional Windows 7 Desktop and Windows Server 2008 Standard server.  When I try to connect my desktop computer to the domain, I receicve an error "the network not found path.  I tried almost all of the solutions found for the search for this error without result.  How can I locate the source of this error and fix it?

  Hi ECBender,

  Thanks for posting the question in the Microsoft Community!

  You cannot connect to a domain and the message that the network path was not found.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• The paths not supported even mean?

  I get an error of paths not supported consistently. It indicates to me the user?

  The images display correctly. The images are found on the path which is "unsupported." The path has been created by Edge animate itself!

  Thanks for some illuminating.

  Hi Grace,

  Thanks for your reply.

  We recorded an internal bug for this issue and work on that. This will be fixed in the next update of animated edge.

  -Devendra

• ERROR: NetExpress 5.0 install path not found - WOOF SDK 4.1

  I was finally able to install the SDK with your help, but now I'm looking at another problem.
  
  In the installation document, after the addition of Eclipse it says:
  Start Eclipse by opening the directory of the SDK Oracle Client utility Scripts
  (Start? All programs? Oracle Utilities 4.0.0.x Software Development Kit? Oracle Utilities
  Scripts Client Software Development Kit) and by double clicking on startEclipse.bat. x is the
  Build number.
  •
  This launches Eclipse with the Welcome tab.
  
  When I run the .bat file, I get the following error:
  ERROR: NetExpress 5.0 path not found... on line 52 of C:\OUAFSDK\SDK\4.0.0.5\Scripts\bin\getBinDirectory.pl.
  
  Nowhere in the install doc it says nothing on NetExpress.
  
  Any ideas?
  
  Thank you.

  It is available on e-delivery in the same place in which you downloaded the framework and other applications.

• Scheduler BI - error "path not found".

  People,
  
  I am trying to edit 'My account' to set devices in 'My products'-> book.
  I could note the health empty error message and not able to create any kind of device.
  
  ******************************************************************
  Mount errors
  
  Path not found (/ users/admin/_prefs/instruments/e-mail)
  Error details
  Error codes: U9KP7Q94
  ******************************************************************
  
  Please let me know where things could've gone wrong.
  
  Thanks in advance!
  
  Cecilia.

  You must manually create.

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.

• Linksys - router bridge - E8350 path not found network

  Dear community of Linksys,

  I recently bought a Linksys E8350 router, to replace the old AP in my network domestic.

  To make the installer of my clear network, I did a little diagram:

  

  So, as you can see, at the top left is the router/modem provided by my internet provider (Telenet, Belgium).

  I have a wired connection in my room, where I have my desktop and NAS connected computer. I also plugged the

  Linksys E8350 that is configured in Bridge mode. My laptop is connected wireless to the E8350.

  On the E8350, I disabled DHCP and NAT and gave him a static IP outside the range of my other router.

  My problem:

  When I go to the network through windows file Explorer, I can see my desktop from my laptop and vice versa.

  But when I double click to access one of them, I get the error message "network path not found".

  Connection via start > \\Computer-name gives the same error.

  Since my laptop or my desktop, I can see my NAS on the network. I have internet on all my devices:

  My office through internet cable connection, my laptop has wireless internet connection trough

  and I can evaluate my NAS from the internet.

  When I remove the E8350 entirely from my network and connect my laptop a hollow wired connection.

  everything works fine. I can see all the devices on the network, connect to my NAS and share files between computers.

  Things I tried already:

  -My PC and laptop are both in a 'private network '.

  -J' disabled my firewall

  -Everything is activated in the menu "sharing advanced settings."

  -J' tried to connect the E8350 to the switch via the Ethernet or WLAN port, nor to solve the problem

  -J' tried to change the NETBIOS settings

  -I don't have your antivirus software that might interfere with something

  -J' updated the firmware on my linksys router to the latest version

  To be clear, the problem occurs when I put the E8350 in my network, otherwise everything works perfectly.

  I hope that I have provided some information decent on my problem, because I can't seem to figure it out myself.

  Thank you in advance.

  Pindox

  The topology of your network is effective from your diagram. With the E8350 in mode bridge in this topology is WAN is connected to the network switch.

  Many devices of bridge no hand NetBios address very well. In some cases, the best way to access the network through a bridge device resources is to use remote devices IP address instead of its computer\device network name.

  In Windows, you can drive old school card NAS records using the IP address of the Servers\NAS:

  PC command line:

  NET use s: \\192.168.0.3\my_nas_folder / persistent: Yes

• Is it necessary to create additional rules not permitted for uses such as Regedit.exe etc when applying software restriction policy?

  Is it necessary to create additional rules not permitted for uses such as Regedit.exe etc when applying software restriction policy?

  Hello

  Please visit the following link. This should explain the software restriction policies in detail.

  http://TechNet.Microsoft.com/en-us/library/bb457006.aspx