Create and burn everything good?

Similar Questions

• my creation of windows dvd does not work! whenever I put a file to convert and burn everything stops working.its updated!

  How can I fix my windows dvd creation? It will not convert and burn all the files to a dvd disc.

  Hi egelad,

  (1) you get an error message?

  (2) is this problem limited to only a specific video file format? Have you checked with different videos with different types of files?

  Step 1: Change Windows DVD creation settings and check if the problem persists

  Change Windows DVD Maker DVD-Video settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Step 2: Clean boot the computer, and try to burn (make sure that your burner software service is running while performing clean boot).

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 3: check the Event Viewer logs and check the application and the module that fails to load. See the links below for the steps and let me know

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  If you try to convert a video file in a different format, you can do this using Windows DVD Maker, you can use third party software to do this.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please visit the links below

  Solve problems with creating a DVD-Video DVD Maker usingWindows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Create and burn blu - ray?

  This program's author (menus, chapters) and burn to blu - ray discs?

  Yes - assuming you have a BluRay burner, of course.

• I have a sony vaio with built-in mic, camera and dvd rom and burner. everything dissappeared, I'm lost how can I get these things back working on my laptop, please help?

  can you please help?

  Hi TaraBaisden,

  1. you receive messages or error codes?

  2. When did you start the questions?

  3. you remember to make changes to the computer before this problem?

  You can try to run the fixit of material and check:

  http://support.Microsoft.com/mats/hardware_device_problems/

  You can also check the status of these devices in Device Manager.

  a. Click Start, Manager type of devices in the start search and press ENTER.

  b. double-click the device category to see an extended list of devices of this category.

  c. right-click on a device, and then select properties to view general information about the drivers.

  d. the status of the device, if there is a problem, an error code will be displayed.

  You can check if the error message or error code is the same for all devices failed.

  Hope this information is useful.

• ?? Fixed subtitles don't build and burn?

  I've corrected the spelling of some subtitles in a project still appearing correctly in the preview but when I create and burn the project on DVD stand as the old version. Any ideas on how to solve this problem? Is there a transcoded file I need to delete somewhere? Thank you!!!

  Welcome to the forum.

  I remember similar happening in the past, but my memory is fuzzy now. IIRC, one only had to go to a subtitle, change the font, and then change it back. It seems only to clear the air.

  If this isn't the case, I would clean the media Cache, especially if the deadlines have been transcoded with old subtitles.

  Good luck, and I'll see if I can find the old nets (could have been before the passage of the forum and then probably would be lost forever) and check my weak memory.

  Hunt

• Creating Windows Dvd encodes and burns, but the dvd is blank.

  * - Original title - when I put my movie in Windows Dvd Maker, it encodes and burns.

  . But when he ejects itself there is nothing on the disc it just says: disc... Why - what is happening to you, it has worked well in the past. Using Windows 7 please help?

  Hello

  1. What is the type of file that you burn in the disk?

  2. have you made changes on the computer recently?

  3. are you able to burn the disc using any third party CD or DVD burning software?

  Once you get a message that the burning is complete, check the size of the free space and space used on the DVD.

  For information about how to check the user-space and the free space, you need to right click on the DVD drive, and then click Properties.

  Well, it seems that when you burn a CD or DVD, the disc is not finalized.

  For reference.
  Close or finalize a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

  Burn a DVD-video using Windows DVD Maker disc: http://windows.microsoft.com/en-US/windows7/Burn-a-DVD-Video-disc-with-Windows-DVD-Maker

  I hope this helps.

• Can I get software to download a home dvd and burn a copy?

  Original title: BURN DVD

  I HAVE a DELL OPTIPLEX 360 to the WINDOwS VISTA HELP. CAN I GET SOFTWARE TO DOWNLOAD A DVD'S HOUSE AND BURN A COPY?

  I don't know about the material. I do not know if this model Dell (who ha a few years about it) can burn a DVD.

  The DVD I want to copy was done by a friend of photos taken during a trip. She has created a DVD of all the photos slide show (with its added). If I want to download the DVD so I can copy it to a blank DVD.

  I can upload photos and burn them to a CD, but this software cannot download and burn a DVD.

  =====================================
  A very simple method to copy a home made
  non-Copie protected DVD is to create an ISO image
  the image of the finished DVD and then burn ISO
  about as many copies as you want.

  First... just a suggestion... using a slow burn speed
  produces a more reliable copy...

  The freeware ImgBurn can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Ignore most of the download buttons and click to the left of the
  green circle with the white arrow... He says...
  «Click here to download»

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.8.0.exe)
  (Windows XP / Vista / 7 / 8)

  (During the installation there will be an option to install
  Trust toolbar, you can select Custom
  Installation and install disable it) (in addition, the)
  installation of Hotspot Shield can be disabled by selecting
  "I do not accept")

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• Can I rip from a DVD and burn it to a DVD with WMP 11?

  I have movies at home I want to rip from a DVD and burn another DVD. Is that possible with WMP 11 or do I have to buy software for the specific task? The DVD I have is DVD + R, I want to burn to a DVD-R format so it will play on my DVD player.

  I have movies at home I want to rip from a DVD and burn another DVD. Is that possible with WMP 11 or do I have to buy software for the specific task? The DVD I have is DVD + R, I want to burn to a DVD-R format so it will play on my DVD player.

  =====================================
  Windows Media Player will not rip a DVD but there is no
  reason for ripping a DVD homemade that contains movies at home.

  Homemade (copy unprotected) DVD is easy...
  Simply insert the DVD in your DVD player... to... Start /.
  Computer... right click on the DVD drive icon and
  Choose explores... you should see the directory of the DVD.

  File 'VIDEO_TS' Now... Copy/Paste or drag/drop...the
  from the DVD in a new folder (renamed to)
  the DVD corresponding) on your hard drive and what's.

  If you have VLC Media Player on your system (for example)
  you could click with the right button on the VIDEO_TS folder and choose...
  "Play with VLC Media Player" and the video will play.

  These files can be several gigabytes that copy makes
  some time... have patience.

  Now... If you want to duplicate the DVD... What follows
  Freeware can create an ISO Image of the DVD and
  Then you can burn the ISO Image on as many copies
  that you wish.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (During the installation there will be an option to install
  the "Ask Toolbar"... you can uncheck only)

  The following tutorials may be worth a visit:

  How to write DVD video files directly to the simple media layer using ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=4632

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Copy an existing DVD and burn

  I've been on a learning curve and has completed several projects, I learned recently how to archive a project so that I can return to it after that she was burned and able to burn another disc at a later date. However, I have a project that has been burned to a disc, and I have not the saved project so that I can go back to the archives and burn another disc.

  Is my question there a way I can "copy" the existing drive so that I can burn it again to another blank DVD? Or do I have to re-create this project again? Thank you

  PS, I did the project with Adobe 8 and still this program on my computer, however I have a new Adobe Photoshop and first 12 items, ready to download.

  AuroraAz

  Thanks for the good news of the successful copy of your DVD-VIDEO to DVD disc.

  I suspect the part on

  When he finished he did not "come back" at the beginning, I had to leave the game remaining empty DVD and she returned at the beginning.

  was related to something which was on rails after the end of your presentation.

  a. extend the Timeline with the - + cursor above the timeline.

  b. press the end key on the main keyboard to the computer and to determine where the 'end' is in line with the programme.

  c. remove what's never on this "end".

  d. after the removal of the debris or else detect you, then press the end key to make sure that it ends at the last point planned to your presentation.

  Please let us know if it worked for you.

  On the other issue, the 'script', without more details, I don't know what happened there.

  Thank you.

  RTA

• Rendering of the DVD and burn: differences between Premiere Pro and Premiere Elements

  I'm Photogaphy landscape and wants to create slideshows in Premerie or import them at 1080 H264 quicktime files generated by Ligthroom 3 first.  I do not make frame-by-frame video editing.  My only goal during the first use is to be able to return or to burn DVDs and finally Bluetooh compatible DVD for playback on TV commercial flat screen, for example, Samsung flat panel dvd.

  Are the DVD rendering and burning capablity of first Pro CS5 and first 9 equivalent elements, IE, which are both likely to produce DVDs that render with natural colors on commercial flat screen TV?

  • My previous experience is that my generated 1080 Lightroom, quicktime H264 movies have perfectly natural color on Mac LCD and other computer screens but see even on a saturated on commecial color flat panel TV.
    
  • Discussions with Adobe tech support people are contradictory on this subject.

  Still is no longer a stand-alone program and is only available with PrPro from CS3. In addition, due to lack of license, the 'trial' of still basically is disabled. Don't even think that you can make a form any try-out, but maybe some features in Encore CS5 has been added. The limitation is that no PrPro Adobe, or trial still has any abilities MPEG-2 - only with fully-paid version. I'm sorry.

  Good luck

  Hunt

• I've just implemented a new iPad and now everything I do online is displayed on my husbands iPhone, how can I stop this?

  I I just set up my new iPad Air and now everything I do online is displayed on my iPhon husbands, my apps appear on his phone as well.  What can I do to stop this?

  It seems that if you use both the same Apple ID If so, create a new and use it.

• Folder hierarchy: how to create and modify a folder hierarchy?

  How to create and modify a folder hierarchy?

  Here's how to change the default template for a folder:http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets thefolder type template according to what are the types of files in the window and the settings display window Explorer. This will show you how to resetthe Windows Explorer folder view settings, disable Automatic folder Type discovery and increase theview of the folder cache to have Vista don't forget display settings, model of file type, size, or position of a specific window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with,open in a new tab (Internet Explorer), etc... dialog windows of type through the goodFile menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free programhttp://autosizer.en.softonic.com/to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista:http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided:http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Media Player: I can't find a way to create a burn list, because the music does not appear in the media player library

  Hi all

  I loaded music from a USB key for the 'my music' folder in the document library, even though I can play music through media player, I can't find a way to create a burn list, because the music does not appear in the media player library - can you please help?

  Thank you

  Yvonne

  No need to copy and paste.  Simply add the folder that contains the music files to the library in this same dialog box.

• PDF files and burning

  I have win 7 Home premium can take you a pdf file and burn it to a cd? I want to store my tax returns filled like that

  If so someone can guide me through it. I'm not tech savy and don't know my way

  Very easy to do. Taken from here: http://kb.iu.edu/data/akvi.html. It is just basic drag / move to CD burning, and then click.

  Creating a data in Windows 7 or Vista CD

  1. Insert a CD or a blank DVD into the disc drive.
  2. On the Start menu, open computer.
  3. Find and select the files you want to put on the CD. On the blue bar at the top of Windows Explorer, click burn.
  4. Name the drive, and then click Next. The files will begin to write to the disk.

• grant, create and drop objects on the diagram to a role/user

  Generic question for Oracle RDBMS:

  As far as I know, there is no way for the owner of a schema privileges such as create objects, or drop objects in this schema to a user or a role.

  I know that a lot of people always asked if it is possible, and I hope Oracle will provide this capability, but as far as I know, it is not possible, even in 12.1.0.2.

  Does anyone have ideas on this?

  I considered to have developers to create programs to create tables, views, packages, etc. and then grant execute on them to the users/roles, but it would be a huge amount of work.

  Did someone come up with an easier way to do this?  Or know of a way that this can be done?

  Obviously, I can not grant create any table, index, package, view, etc., or to delete any table, view, etc., and of course we grant the DBA role.

  I thought that the 'become a user"was a solution, but it is apparently far from able to do such things.

  In our case, apparently, we have users log in with account of the owner of the schema and create objects, modify objects, etc.  (Change the objects is not a problem, because we can give everything on the object to someone.)   The problem is that we need to prevent people to connect to shared group accounts (or as the owner of the schema record) to create objects, drop objects, etc.).  We all have as their own user name and will not be able to create and delete objects in patterns of selection.

  Why must everyone CREATE and DROP of objects within the framework or the processing of information on the day the day?

  I feel a serious design flaw & conversion Orace DB.