Create recovery media requests double layer DVD

Similar Questions

• HP 15 Notebook - r063tu model: what quality of Flash drive required for creating recovery media for laptop 15 HP (r063tu)?

  I want to create a recovery media for my laptop HP 15 (model r063tu) on a Flash instead of DVD drive (had a bad experience with the DVD in the past). Should I buy a 16 GB or 32 GB of capacity 3.0 USB drive. Because it will only be to create recovery media, obviously I won't be able to use it for other purposes, so want to buy everything as this is sufficient (and save on costs!). Thank you.

  Hello

  32 GB is necessary because the recovery partition is almost always about 20 GB or more.

• Cannot create recovery media

  Attempting to create a recovery media for my new laptop Toshiba L-500; I get the following error message:
  {Cannot read the following file.
  D:\ZZImages\ZZImages\PREINST13. STORMWATER MANAGEMENT
  (Code d'erreur: 020150-20-00000000)}

  This has happened while creating recovery disc 1 and disc 3... with the same error message. considering that the Recovery Disk 2 was created without any problem.
  I tried burning the files again for discs 1 and 3, which could once again, but 2 disk has been created again successful without any problem.

  Please indicate the possible solution.
  (4.7GB//120Min//16X used transonic DVD-R) to create Recovery Media Creator Toshiba recovery disks)

  Try to use TDK or Verbatim DVD-R. I used these empty discs to create recovery discs on several different Toshiba laptops and every time everything was fine.

  It seems crazy, but you may have problems using some some discs.

• Need help with the recovery partition/create recovery media

  HI - first thing I did when I got my thinkpad is a clean install of w7, but then I thought about it and restored the recovery partition, conviniently located at the end of the training, in order to create a backup dvd factory. Thing is, when I click the autorun (lenovoqdrive.exe) and select 'create recovery media', I get an error stating that "program files (x 86) \lenovo\factory recovery\recovburncd.exe" is missing... obviously since the operating system partition was crushed.

  I tried RnR and looked on the software + drivers page and nothing happens as "... \lenovo\factory recovery\" when it is installed. So, where can I download the program that creates the recovery discs?

  (I know possible to restore the operating system of the *.wim file but I want to leave that as a last resort).

  Okay here's what I did to who mightve had the same question: as mentioned earlier, I have restored the partition Q with (your favorite free partition recovery tool), then booted from a usb winpe (with imagex) generated from victory aik (free).

  first I deleted (from winpe boot usb) windoze partition with diskpart and recreated the 2 partitions S & C (and Q is on the left) by hand according to 'recovery.ini' found on q. then I restored S and C 'sdrivebackup.wim' and 'cdrivebackup.wim', respectively, using imagex.exe, which is actually two one liners.

  Finally, I tried the bcd to fixation by hand according to "bcdinfo.txt", also found on Q, but that did not really work... so I just jumped into a bootable win7 USB and he rewrote the bcd by itself (I assume). the last step has been fixing the mbr by using /fixmbr and /fixboot bootrec.exe.

  ATM I started just and afaict it behaves exactly like the first start-up of the plant. see you soon

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• Problem during construction on a double layer dvd

  Hello! I made a dvd of my vacation with yet, but it was so big (6.62Go) I bought a double layer dvd to build. I have a video set as first game and 3 menus that are auto-activées when we choose a different button (as in the tutorial but linda.com I put a video on the background instead of an image).

  When I start to build, the writing is good but to roughly a little more than one-quarter, still ejects the disc. I tried to read the dvd on my computer and a dvd, but he could not read. Please help me as soon as possible. I worked on this project for several days and I am very proud of the result. I want to really over!

  I use the most recent updated even on a 64-bit windows computer 7.

  I did everything and it did not work

  I'll take that as a 'no' to my question.  So I would simplify to see if you can sort out what works and what is not. Rather than mess with what you have, I create a new project, add a menu, use no autoactivate and no introductory video and import one of your videos as a timeline and just a link.

  Does it work?

  I would try each of the main items that John described too.

• Double layer DVD burning does not

  The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

  any thoughts?

  Thank you.

  Message edited by voiron on 2008-05-15 10:45
  
  

• Envy 15-ah150na: create recovery media - does not recognize a 32GB kingston generation 3 data traveler flash drive

  Hello

  I have tried to create recovery media on a clean formatted FAT32 drive Kingstone (32 GB 3 generation) flash and keep giving me the message that the flash drive has insufficient free space.

  Tried after formatting the 32 GB again and the same message, tried the NTFS file system and still the same.

  Pending a solution please. Thank you very much.

  Best wishes

  LF

  Official response with the support of HP on twitter:

  Try to use the tool of media recovery. http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive. The USB has a boot device.

  .. who has worked on the same USB stick 32 GB .  BUT it is not the same as in the HP Recovery Manager.

  Don't bother more. I accept the foregoing as a solution.

  Good luck with users who have this laptop. Also issues with the network adapter to which I am trying to fix at the moment.

• VAIO SVS13A290X cannot create recovery media

  Hello everyone!

  I have just bought a SVS13A290X, win 8, vaio care 8. Just after I tried to create recovery media, but I couldn't.

  There is no possibility to do in vaio care. He do not have a restore option, but not the option to create a recovery media (sic).

  I went to the Sony esupport site and there is an old video on how to create a recovery media. But it does not match the real software.

  I did all the updates with windows 8 and the sony software and nothing has changed.

  Anyone else had this problem with this model PREMIUN SVS?

  Caesar

  Uninstall and then reinstall vaio care and updating

• Envy TouchSmart laptop, 15 - create recovery media stuck please insert one of the following media

  Envy TouchSmart Notebook PC 15 - 8 64-bit Windows - create recovery media stuck on "Please insert one of the following media" - USB Flash drive or any optical drive found. She just keeps spinning a small wheel. The USB Flash drive is inserted and its light flashes.

  Hi, new Cheryl, I spoke with HP support. There is bad news and good news. They does not solve the problem with the process, they don't even try to. They just said that they embarquerions me a flash drive already created recovery media, without cost to me. If the problem is not resolved, but it is resolved. Thank you for your help, it is greatly appreciated!

• Impossible to find in the Menu to create recovery media ThinkVantage programs

  Hi all:

  I'm doing a product recovery disc for my Type 8380 - 85U Thinkcentre. desktop computer.  The help file says to go to Start --> all programs --> ThinkVantage --> to create recovery media to do this.

  I did, but there is no option in the menu of ThinkVantage to create recovery media.

  I need to know what the real app is only the tip of the shortcut to.

  I called the Tech Support line and told to search for and download document Outphasing-67520.  I have done this and downloaded the Lenovo systems Toolbox which told me to provide me with the utility to create the recovery media.  I installed the Toolbox systems and create product recovery disc was not one of the functions that this app provides.

  Can anyone tell me the name of the file and if possible the location of the executable file that indicates the shortcut in the menu create recovery media.

  Thanks in advance for any help getting this done product recovery disc.

  Best regards

  Michael, W1RC

  Hi Netnubar:

  You WROTE:... the executable file is "RRMedia.exe".

  Thank you. You are right.  My problem is solved.

  Wonder why two of the IBM support people didn't know that.

  Best regards

  W1RC

• Problem reading disc double layer, DVD player

  Windows DVD Maker burned fine on my drive of Verbatim DVD + R double layer.  But he won't play in any dvd player, we have.  Also tried to play in our portable dvd player and the PS3 with no luck.  What Miss me?  The 4.7 GB DVD works fine at our DVD players.  Thank you

  Thanks for your reply KSib.  I had the dvd recorded in the standard wmv file that windows saves in, which is very good.  But if you try to go to where you saved it on your computer and try to write on a double layer dvd, it is write it, but don't allow you to watch on your computer or another computer... not on a dvd player.  The only way to be able to play the DVD double layer on a dvd using Windows player is to burn the Windows DVD authoring application DVD (not the location to save to your hard drive).  It takes forever to burn, of course... but so well worth it in the end when he actually plays.

  Yay for me!

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Can my laptop burn double layer DVD + R discs?

  Hey, I have a laptop of HP G60-213EM

  And I know that I can burn a DVD + R etc but can I burn double layer DVD + R discs? On my PC, I usually use Verbatim discs double layer. And really want a quick answer if anyone knows if my laptop will burn Verbatim dual layer DVD + discs R. thanks

  Easy trolling for the congratulations but not so easy to give the right info. Yes, you have the DVD Multi burner double layer, so you can burn discs double layer. You must also good burning software. Two layers are difficult to do and you get a lot of roller coaster. The jump from Layer 1 to layer 2 to the burning often causes a problem. The best way to do it is to make a .iso to first and then burn.

  Message edited by Hüffer 22/08/2009 16:30

• double layer dvd win 7 x 64 does not burn

  I can't burn a double layer DVD (Memorex) in Win 7 x 64. Used to be able to but not now. Search many forums, no help. DVD burners have inclluded HL, HP 1260 t and Asus BW-12B1ST. All software and drivers up-to-date, I think. Even tried different DVD, no luck. Single layer all mfg all right, just not burn DL. Frustrated.

  If you can, lower the burning speed.  Double layer DVD are much more sensitive and downright temperamental than 4.7 standard.  And as you know, they are 5 or 6 times more expensive, too!

  Good luck.